Counting matching models…
Connect vacuum ports in popular sizes to the Cen-Tec Quick Click hose. Here are some notes: There is a .2mm/0.008" clearance added to the diameter against the given port size. This was achieved through trial and error on my printer to…
I was asked to make some tags for charging cables for use by elementary school age kids. After not finding any that looked durable enough, I designed these to withstand heavy every day usage. There are several different sizes, use a…
The DC18SD is slightly smaller than the DC18RC, so this adaptation will fit this model. Insert the top peg at an angle first, and then push in the bottom two support pegs. You may want to add a screw into the pegboard for extra support.…
This uses the DDD Printable Wall Control System ( github ) to mount the drills and drivers. The mounting width is about 42mm, this works well for the tools that I own. I've tried it with the Makita XFD10Z drill and and sub-compact…
This uses the DDD Printable Wall Control System ( github ) to mount the disc storage. Use a good percentage infill or thick walls to keep this rigid. For the sidepieces, I used the standard 2x2 angle inverted side brackets. Links: Left…
Detailed printing and assembly instructions on Instructables Update 1/3/2023. Alignment groove between pieces enlarged Display Front pieces realigned to face downward to bed. This requires a bit of support but keeps the front lip uniform…
This uses the DDD Printable Wall Control System ( github ), taking the battery holder dimensions from the Makita 18v Battery Wall Mount model. I included some custom angle brackets for mounting - it'll need the standard push pins for…
This uses the DDD Printable Wall Control System ( github ) creating an angled mount for the Makita DC18RD Battery Charger . 2024/6/22: Update - Version 2. Angle and mounting have been improved - it no longer requires a strap to keep it in…
This uses the DDD Printable Wall Control System ( github ) to mount the tool. I've designed this using the Makita XMT03Z , but it may fit other similar oscillating tools. The mounting dimensions are 18.2mm wide and 6mm thick which support…
This is adapted from the DDD Printable Wall Control System ( github ). I used the dimensions from this project by RobertCowanDIY . I used a 3/8" dowel from the home center, cut it in half and gently hammer tapped them into the holes. I've…
Allows usage of this featherboard to be used on a table saw with ¾" miter slot (with 3/8" depth). Uses three 1/4-20 UNC hex bolts, 2 ½", and nuts. This style of miter slot is a straight channel - no T shape to tighten vertically. The…
This uses the DDD Printable Wall Control System ( github ) to mount the planes. Planes: Stanley No 60 ½ Block Plane Stanley No 4 Smooth Plane Stanley No 5 Jack Plane Note - I have a Fulton plane of similar dimensions, but it is unlikely…
This uses the DDD Printable Wall Control System ( github ) to mount the marking tools. Here are the items that are fit for these mounts: MulWark 5" Spring-Loaded Center punch Narex Marking Knife Wheel Marking Gauge Pica-Dry Use the Angle…
This uses the DDD Printable Wall Control System ( github ) to mount the squares. Squares that I've mounted: 100x70mm machinist 200x130mm machinist Speed Squares - 7" and 12" Combination Square I'd recommend using the locking spacers…
Comes with two parts - the t-slot mount and the dial indicator mount. They do not require any printing support. I used .16mm layer height but .2mm should also work. Combine the parts by first inserting t-slot mount into the table saw and…
This uses the DDD Printable Wall Control System ( github ) to mount the chisels and mallet. Use the Angle or L-Brackets for the sides - I used 2x1 L Bracket Flat Left and Right for the chisels and 2x2 Angle Bracket Flat Left and Right .…
Printing Notes: PLA, 50% Infill, Normal Support for all pieces. I used Tree Support for buttons. Carefully remove all support after printing. May need to use hobby knife to get it exact. Sand all surface pieces for a smoother look. I used…
This uses the DDD Printable Wall Control System ( github ) to mount the saw. This is designed around the Makita XPS01 plunge/track saw. The geometry on the 40V XGT base plate looks pretty similar in the photos, so it may work for that one…
This is designed to fit the inflow port on the Harbor Freight 2HP dust collector blower with very little wiggle room - it needed to be tapped in. This dimension is 124.8mm or 4.91in. I've included a version which includes a mounting hole…
Original tool design and blog article . (Thanks to Paoson Woodworking for permitting this version!) Here are the casters - they work great, but the gear is a little awkward to move by hand. This design makes it at least 10 times easier.…
This VU Meter controller uses an Arduino Nano to control two strings of NeoPixels. It has an LCD Panel to display the status, and a button to control the animation preset and sensitivity. The Nano is mounted on a PCB that can be ordered…
This uses the DDD Printable Wall Control System ( github ) to mount the sander. I have the Bosch 5" sander, but it seems like the hook & loop sanding pads are fairly standard which is what the mount is using. Use a good percentage infill…
This uses the DDD Printable Wall Control System ( github ) to mount the screwdrivers. 932/6 Screwdriver set Kraftform Wera 334/6 Screwdriver set Kraftform Wera Use a good percentage infill to keep this rigid, at least 40%. For the…
Instead of EDPM seal for the extractor fan, print two of these seals using TPU. It's at .25mm increased height from the surrounding surface, if this is insufficient, increase the Z axis dimension.
This is a door handle designed for a 3D printer enclosure. It is designed to attach to the opposite side of the bracket for this magnetic door catch (JQK Magnetic Cabinet Door Catch, Stainless Steel Closet Catches with Strong Magnetic,…
This uses the DDD Printable Wall Control System ( github ) to mount a Craftsman CMHT26028 Hex Key set onto a wall control surface. For the sidepieces, I recommend using one size higher than the model so that a locking spacer can be added…
I bought this KoPach filter for my Craftsman vacuum but didn't realize that it required a cap to keep in place. This model secures it. The filter seems to be good quality, I'm happy to recommend it. Requires support for the sides - I used…
This uses the DDD Printable Wall Control System ( github ) to mount Kraftform Micro screwdrivers onto a wall control surface. I didn't use support for printing and used PLA with 20% gyroid infill. For the sidepieces I used the 2x0 Flat (…
This allows repeated realignment of a T-Track fence or other jigs to a set position. This is useful for a sliding carriage fence such as the type used on Paoson's Mobile Workbench with Table Saw & Router . Use it much the same as a ruler…
See the DDD Printable Wall Control System (and more models on Github ) to become familiar with how it achieves strong and secure wall mounts by joining several pieces in perpendicular directions. This addition replicates some of the…
Holds this well reviewed rechargeable Hotfien air duster from Amazon in a 2x2 Gridfinity frame.
These are all currently available results.
