Counting matching models…
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
Protect PSVR2 USB-C plug and PS5 USB-C socket in case of accidental cable pulling to sides. Printed from PETG, 0.4mm layer, 15% infill. Any (almost) settings will work. Fusion 360 source included.
See “ Differences of the remix compared to the original” section for changes description.
Allows using BambuLabs Wiper with Voron Decontaminator buckets. Features: wall guard for easy bucket mounting even with imprecise hand movements mount holes in positions where Voron Decontaminator bucket mod expects them (for magnets…
Description: Allows to mount FX-USB and FX-HDMI1 keystone adapters inside of standard Voron Skirt. Compatible with: keystone FX-USB (EAN: 5902887017513) - voron-skirt-keystone-inside-usb.stl keystone FX-HDMI1 (EAN: 5902887005220) -…
Standard Voron 2.4 Z Chain Guide extended with thermistor (cylindrical type, 10mm x 3mm) mount. Thermistor is used as chamber thermistor. Thermistor secured with M2x5mm (BHCS would be best). Along with chamber fan:…
Stand for cheap thermometer / hygrometer that replaces LR44 batteries with single AAA battery as power source. Thermometer / hygrometer module can be bought on aliexpress, amazon etc. Variant with and without sensor mounted on the cable…
Refer to origin of this remix: https://github.com/tanaes/whopping_Voron_mods/tree/main/Z_belt_cable_cover The difference is that this version fits narrower 2020 extrusion T-slots (original didn't fit mine - they were intended for a bit…
Right rack mount for Topton N100 i226-V Mini PC that takes only single 1U. One original bottom screw replaced with M3x40mm. Holds device in place. Printed from ABS with 0.2mm layer, 40% infill, 4 perimeters, 5 top/bottom layers. Design…
Vacuum adapter (45mm male to 35mm female). Tested with DeWalt DXVCS002 Cyclone Dust Collector 45mm socket and Parkside PWD 30 C1 35mm vacuum hose. Print without supports. Fusion and step CAD files are available.
Wanted to add wheels to my IKEA BROR system (65x55x190cm; model 294.717.59 in my case; uses BROR posts model 103.332.87), so made this mount. No modifications needed in BROR system itself. Printed in MK3S+ from PETG, 0.3mm layer, 4 walls,…
Magnetic mount for cheap chinese thermometer. Thermometer can be installed in two ways - with magnets on bottom or top (including top of P1P/P1S). Mount under angle, so P1* LED doesn't shine too much into LCD. Works with X1C, too. Using…
MMDVM based HAM radio hotspot. See original project description and differences section (below on the page) for this project. Using https://www.pistar.uk/ software. Note - solder JP1 pins on hat together to be able to upgrade hat firmware…
My mini motherboard has only one PCIE slot which is already occupied. I wanted to upgrade network interface on it to 2.5Gbit/s and later to 5Gbit/s ethernet. I used M.2 A+E key format 2.5Gbit ethernet card (Realtek RTL8125B based):…
Dust collection for Ryobi Router (R18TR) to use with vacuum hose equipped with 45mm connectors. Tested with 45mm hose from DeWalt DXVCS002 Cyclone Dust Collector. If you want to use it with home 35mm vacuum then you can try using Vacuum…
Adapter for using an external 1.5 V power supply with devices that normally use LR44 / AG13 / A76 batteries. Printed in PETG, 0.12 mm layer height, no supports. A 4 mm wide, 0.1 mm thick nickel strip is required (the same type used for…
Handles for protecting front and back of the radio while also raising it over surface. Printed from PETG. Create opposite piece by mirroring object in slicer software. Glued 4x round rubber feet (up to 8mm diameter).
Flat and long vacuum nozzle. Dimensions: 35mm hose (doesn't need to be perfectly 35mm) 10.5x35mm nozzle, so flat short: one part only: ~25cm long: two parts connected: ~46cm Print options: printed from PETG seam position: random (I like…
Revo nozzle holder for bottom line of holes in unmodified Voron 2.4 skirt (see photo - holders for 0.8, 1.0 and 1.2 nozzles). For top line of holes please use files from remix source (on photo - holders for 0.25, 0.4 and 0.6 nozzles).…
Needed mount for laptops and portable monitor to mount on side of IKEA furniture. Big version fits on 256x256 bed (Bambu printers), with appropriate rotation. Total size, with mount holes - 266mm width x 166mm height (smaller version also…
Modification of https://www.printables.com/model/74422-raspberry-pi-3b-heatsink-case-for-prusa-mk3s-rotat with 30x30 fan mount added. M3x10 screws were used (and painted black with marker) + M3 nuts to mount fan. If your fan has low…
Printed from PLA (a mistake, use PETG or ASA because mini pc is becoming quite hot), 0.55mm layer, 0.8mm nozzle, 15% infill but any other settings will also work fine. Device (even without mount) takes more than 1U unfortunately. Original…
HackRF One & PortaPackH2 ( (OpenSourceSDR Lab version) stand with slot for USB charging cable. Fusion and step CAD files available.
Wanted small(est) AirTag enclosure that doesn't expose it. You can add your logo or text on the enclosure (best to put it on bottom, so it will keep stable orientation regardless how hard you close the top cap). Fusion source file is…
DIY fumes extractor: - heavy stand (uses 100x100x25mm metal scrap bought from local ebay like site as ballast) - articulated segmented arm (Marius design) - connection to 75mm flexible hose (threaded connection) - cheap duct fan with a…
Stand for cheap thermometer / hygrometer that replaces LR44 batteries with single AA battery as power source. Thermometer / hygrometer module can be bought on aliexpress, amazon etc. Variant with and without sensor mounted on the cable is…
Features: allows mounting aluminum LED profile under the left/right top 2020 extrusion mentioned aluminum profile is used for cooling LEDs. Profile is sold here under “TRILINE-MINI” brand, symbol PROFIL-MN-3LM-CZ-2C. Refer to the image…
Enclosure for RPi 5 with Pineberry Pi "Hat Drive! Top" [1] (NVMe hat) but mounted at bottom. Yes, top hat mounted at bottom instead of on top. I wanted to mount it that way. Used four M2.5x6mm standoffs and 40mm FFC cable (25mm FFC cable…
Customized version of http://www.thingiverse.com/thing:713300 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=713300 Instructions Using the following options: screw_hole_diameter = 55 supportless_friendly…
Adapter for connecting 100mm duct fan output (friction fit) to 75mm P2PU spiral ventilation hose (threaded). I'm using: this hose - RONDO PUR FUL04 75mm r -…
Clamp for cheap Chinese soldering iron + heat insert nozzles set: https://aliexpress.com/item/1005005431480802.html Iron diameters are ~18.5mm (rubber) and ~16.5mm (blue part). No model markings. Compare photos and dimensions if you want…
SHAHE 5100 200mm calipers ( https://pl.aliexpress.com/item/32788330341.html ) IKEA Skadis holder. Also fits Mitutoyo 500-182-30 200mm just fine. Print on bottom side, without supports. Mount hooks on skadis first and then slide on holder.
Very nice enclosure for gusmanb logic analyser made by @3ddk, changed for multicolor printing. After loading top stl file in slicer (Bambu Slicer in my case) click “Split to parts” (so letters get separated) and select desired colors in…
Universal steel sheet holder for 10 sheets. Meant for IKEA BROR but can be installed on any vertical bar that contains matching mount holes or is made of wood. Advantages: can be operated with one hand good visibility of plate types…
Raspberry pi 1 B model (old model, not B+) PCB doesn't have any mount holes. This plate allows rpi to be mounted on it and get mount holes. It can be used with SD card (full size) or with low profile / half size SD-> microSD card adapter.…
Print in multicolour or drop letter objects (to get embossed text). Top/bottom is compatible with origin of the remix, so you can mix one part from this remix with original part (if you don't want some text for example). Note : if you use…
Holder to keep Parkside Long Reach (300mm without a handle) Screwdriver Set mounted on IKEA Skadis board. Printed from PETG, vertically, no supports needed, default slicer settings. To mount it install 3x org-caliper_holder_hooks.stl on…
The original Powerflex phone holder is not suitable for holding phones in thick cases like mine. This modification utilizes the back of the original Powerflex holder (Opel part number 13471402) and adds a new front. The front is printed…
Original Powerflex phone holder is unusable for holding phones in thick cases like mine. This modification uses back of original Powerflex holder (Opel part nr 13471402) and adds new front. Front printed from PETG. Front consist of two…
Enclosure for: Raspberry Pi 2 / 3 in enclosure from aliexpress ( https://pl.aliexpress.com/item/1005005872780987.html ) Shari SA818 radio module ( https://pl.aliexpress.com/item/1005003245127518.html ) 1.3" OLED I2C screen ( already had…
Print: no supports needed printed from PETG with 30% infill, 0.6mm nozzle and 0.3mm layer height (but almost any other parameters will also work) Parts: 2x M3x8mm (M3x10mm will also do) screws for mounting to the prusa frame 4x M2.5x16mm…
“Vertical LED Light Bars for the Prusa i3 MK3S/MK3S+” modified to use black "Worthy-A" 16x9.28mm aluminium led profiles (24cm each) and mounted on "Remixed Mounts for Vertical LED Light Bars for the Prusa i3 MK3s/MK3s+". Using "v-tac…
Testing ESP32 camera with Articulating Mount on Prusa MK3.5. Module: https://pl.aliexpress.com/item/1005006074477423.html ("ESP32-CAM downloader"). The unit I got has 2MB of PSRAM. Any other ESP32-CAM should also work. Firmware:…
Printed with PLA, 0.20mm layer. Mounted with double sided tape. Edit 1: Added one side version. Allows handle to freely move also in fully extended position. Edit 2: Added proxxon-press-mp-120-hex-key to hold hex wrench “5”.
Customized version of http://www.thingiverse.com/thing:97238 Instructions Using the following options: wallThickness = 2 outsideBandsaw = 24.3 vacuumLength = 50 $fn = 45 bandsawLength = 30 insideVacuum = 31.8 Category: Tools
Power supply: based on cheap (bought used) server power supply HP-HSTNS-PL14 with output voltage raised from 12V to 13.9V (including increasing over voltage protection threshold) based on description by SP4UBW:…
Trivial design that replaces original plate for hanging ICOM HM-210 microphone on a hook with a standard round hanging handle. M3x10 FHCS screw is needed. Edit: Added a lower part to move the handle away from the back of the microphone…
WARNING: Not yet tested on a live server for fitment. If you’re able to test it before I do, please let me know in the comments. Replacement bracket for external ethernet / sdcard Dell module (CN-0x99HC) used in Dell PowerEdge R430/R630…
Bathroom Radiator Box: clicks in place for 22mm diameter radiator tubes hook for 102mm between the top of the upper tube and the bottom of the lower tube main box positioned away from the radiator to avoid obstructing airflow adjustable…
Allows to use BNC connectors with Retevis RT3S and protects SMA connector from wearing out (SMA connectors have limited number of connection cycles). Printed from PETG. No supports needed.
Key for Vevor Electric or HAM Antenna box. Steel, IP65 (20x20x6" and other sizes). https://www.vevor.pl/obudowa-elektryczna-c_10749/obudowa-elektryczna-ze-stali-vevor-20-x-20-x-6-cali-ze-stali-weglowej-ip65-p_010919962274 Printed from…
For Xiaomi Yi camera - http://goo.gl/1zrPej This ports cover was done to protect sd cart and HDMI port while allowing micro usb charger connection. That way you could additionally power Yi from power bank etc. Category: Camera
Allows mounting charger under the desk, on the edge. Print two pieces (from any material you want; I used PETG). Use wood screws. Source file (Fusion 360) included.
Mounts that allow CP2102 to micro usb PCB to be screwed into enclosure. Three variants with different mount points (2mm holes) locations. All require usb micro connector to sit in some enclosure hole to be kept stable. Print Settings…
Mount allows installing NVMe disk with USB enclosure on DIN rail in Voron 2.4 and then boot OS from it. I'm using 2230 M2 NVMe disk (Samsung PM991A). USB enclosure ("no name" model) holes for securing bigger, 2242 and 2260 disks, are used…
What? Replacement part for safety and locking mechanism in the Philip HR7768 blender cup. What does it do? The white part in the photo is the original. Its purpose was to engage the safety mechanism, allowing the blender to start blending…
Weehoo iGO Turbo 2015 Bicycle Trailer ( http://rideweehoo.com/ ) have enclosure over chain but unfortunately it is mounted only in front of trailer. The end part of enclosure pipe is not mounted and is making huge noise when it hits the…
Edimax POE Injector GP-101IT tray for 1U Raspberry Pi Rack. Tight injector fit in tray. Printed from PETG, no supports. Fusion and step files are available. ps. Other Edimax injectors seem to use the same enclosure, so there is a chance…
Printed from PETG, 0.2mm layer, 15% infill. Top tablet holding taps printed with manually painted supports. Mounted using 2x M3x20 or 25 FHCS and 1x M3x14 FHCS screws. If you want to print it on a printer with a smaller bed just cut in…
Hinge broke in release mechanism in my SPF+ module. This fixes that Used M1.6x4. Note that the fix adds a lot of bulkiness to sides of the module. It might be not possible to place such fixed module in middle between other SFP+ modules in…
SHAHE 5100 300mm calipers ( https://pl.aliexpress.com/item/32788330341.html ) IKEA Skadis holder. Print on bottom side, without supports. Mount hooks on skadis first and then slide on holder.
Very simple rubber feet to prevent scratching the desk surface that the Bosch PBD 40 bench drill stands on. Printed from hardest TPU I had (68D). Print multiple parts at once or slow down print to avoid melting of narrow upper part.…
TRX SParrow 4" with original legs tips backward very easily. More stable stands that prevent that. Original legs also mounted (so they won't get lost). Printed from PETG (no supports). Original screws were used. 4x 20x20mm self-adhesive…
Standard IC-7760 stand has quite low angle. Too low for my liking when using control unit on the desk. This is a replacement stand with 110° angle. Stand is screwed to the bottom of control unit (control unit has metal inserts for that…
Push button momentary switch, unknown model. Had it around. Button was too wide and needed to be filed on two sides to make it narrow. There are two very narrow walls in the project that can be gone after slicing - these are not really…
Replacement part for Brake Hydraulic Line Clip 13432669 . Original part is cheap but its availability here was like 1 month of waiting. Printed from ABS with 98% infill and insert from TPU. M3x16mm for hinge and M4x10 as locking screw.…
DEDRA dual battery holder with locking mechanism for SAS+ALL 18V system. Printed from PETG with default profile. Fusion and step files are available. If you need single version then please take a look at original source of this remix.
Microphone in Sony Pulse 3D headset is very, very, very, very bad. People told my that over and over in multiplayer games. So decided to change things: microphone taken from cheap (bought broken from second hand) SteelSeries Omen by HP…
CW key base : heavy (1.1kg with the key) magnetic key latch on the base Materials : cheap CW key from aliexpress (in my case https://pl.aliexpress.com/item/1005003402252364.html ) 90x20mm steel cylinder, bought from local ebay-like site (…
Legs that allow the RF Deck of the IC-7760 to be placed on its side instead of flat. The legs raise the deck by 30mm to ensure airflow, including to the side ventilation hole. Printed 2x from PETG with default settings. Note: leg is…
Mount for installing iphone 5s on WF10X/20mm 23.2mm microscope eyepiece. Source (rsdoc files for DesignSpark Mechanical v2.0) included. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: PLA. Used M3x8mm screws.…
Why? I was interested in how myantennas com common mode current choke, model CMC-154-3K, is built internally. Unfortunately its side caps are glued, so I had to destroy these to open it. What? This project provides replacement caps and…
Very simple mount for keeping three Skadis Storage Bins (by Scottw86) together. I'm using it to keep screws and other parts of (temporaily) disassembled electronic devices on my desk. Printed from PETG, default settings.
Logitech M570 trackball replacement rubber feet. I'm loosing these sometimes. Printed from Fiberflex 30D, 0.15 mm layer height. Installed using thin double sided tape.
Printer case light. Instructions You will need 2x 5W led strips in aluminium profile ( http://goo.gl/FgBv8T ). Modified to remove touch/brightness control chip (see photo) and micro usb connectors. Removing micro usb is optional - holders…
A sorting spoon used to scoop out only the larger pieces from a can of cat treats. Printed from PETG using the “strong” profile with few additional wall layers. The part was printed flat and then heated with hot air to bend it to the…
Mount bracket for Hasivo S1100WP-8XGT-SE switch. Replace original screws with 4x M3x6 (don't use longer ones to avoid internal damage) and few (2 is enough) wood screws. Switch is mounted upside down to make it easier to unplug ethernet…
Brother MFC printer LCD cover. Protects against dust ... and cats. Tested on Brother MFC-L8390CDW (LCD size ~147x98mm). If you only need dust protection then print brother-lcd-cover.stl from TPU. In my case soft Fiberlogy FiberFlex 30D…
Momentary button (11mm diameter mount hole) enclosure for Prusa MK3. In my case connected to raspberry pi, controlling printer led lighting.
Paper towel holder for IKEA Bror. I'm using it on 190cm high Bror variant. Printed from PETG, no supports. Mirror second part in slicer or use provided 3mf file. Additionally needed: 53cm (or close) long, 20mm diameter wood or metal rod…
These are all currently available results.
![Raspberry Pi 3B+ Fan Case for Prusa MK3S (Rotated) [Fusion 360 source]](https://media.printables.com/media/prints/237162/images/2162589_926fa7b5-c1d7-4a9c-8dc7-bf9f5fdf19dc/fan-case.jpg)
![raspberry pi 1 B (old version, not B+) mount plate [DesignSpark Mechanical source]](https://media.printables.com/media/prints/222931/images/2038353_644e6862-67ab-4fe8-91c7-d26c61231f5c/rpi-old-b-1_display_large_222931.jpg)
![Vertical LED Light Bars using 16x9.28 aluminium profile for the Prusa i3 MK3S/MK3S+ [Fusion 360 source]](https://media.printables.com/media/prints/239792/images/2168260_80e98c9f-4a32-4be0-84d1-ea7f458d9ad8/lightbar-vertical-arm-3.jpg)
![Proxxon Micromot MICRO-Press MP 120 tool holder [Fusion 360 source]](https://media.printables.com/media/prints/232580/images/2112857_d337db02-70fb-4859-a2b2-14e335257022/proxxon-press-mp-120-bits-holder-v3.jpg)
![CP2102 (UART to micro USB) PCB mounts [Fusion 360 source]](https://media.printables.com/media/prints/222928/images/2038321_71f8776e-540d-4539-9e0c-23db02c01860/large_display_cp2102_uart_usb_mount2_222928.jpg)
![push button for LED Light Bar [Fusion 360 source]](https://media.printables.com/media/prints/237401/images/2150416_0e477c6a-4d03-49ea-9340-8233bdba55cd/push-button.jpg)
