P
PrintablesGyörgy Balássy
Heavy-duty S-hook
A hook designed to hold heavier objects. Print instructions Feel free to print it with 0.3mm layer height.
- Downloads
- 2,621
- Likes
- 186
- Rating
- 4.94
All models
Counting matching models…
P
PrintablesGyörgy Balássy
Skadis caliper holder
Holder for the IKEA Skadis board to mount a mechanical caliper. No support needed.
- Downloads
- 720
- Likes
- 55
- Rating
- 4.87
P
PrintablesGyörgy Balássy
Drill press table leveler
This tool can be used to easily level your drill press table perpendicular to the drill bit. Print it with 0.2mm layers and insert 4 pieces of 8mm diameter, 3mm thick magnets. The magnets should be press fit, no glue needed. The holes on…
- Downloads
- 579
- Likes
- 238
- Rating
- 5
P
PrintablesGyörgy Balássy
Batman Box
This is a custom box with a Batman logo on the top. It's size is designed to tight fit a TP-Link M7350 Mobile Wi-Fi device with a 1.7mm foam around it. It has three parts: the bottom, the top and the logo. Print the bottom and the top…
- Downloads
- 439
- Likes
- 104
- Rating
- 4.8
P
PrintablesGyörgy Balássy
Flip Stop for Fence T-track
This is a custom flip stop for a DIY woodworking tool fence (drill, saw, router, etc.). The model is fully parameterizable, so you can open the attached Fusion 360 file, change the parameters and let the model adjust itself to the height…
- Downloads
- 338
- Likes
- 64
- Rating
- 5
P
PrintablesGyörgy Balássy
Star Wars Macro Keyboard
This is a Star Wars theme inspired device that you can connect to your computer and it will act as a fully functional HID keyboard. Features: 5 configurable buttons A safety switch with a safety LED 2 additional LEDs 3D-printable case You…
- Downloads
- 318
- Likes
- 268
- Rating
- 0
P
PrintablesGyörgy Balássy
Dell trackpoint cap for Latitude E7440
This is a replacement cap for Dell Latitude E7440 stick pointer.
- Downloads
- 288
- Likes
- 13
- Rating
- 5
P
PrintablesGyörgy Balássy
Vesa mount plate 75x75mm fixed
You can use this plate to mount your monitor to a wall if the monitor supports the 75mm Vesa standard. How to use this: Print this model. Use the model to mark the mounting holes on the wall. Drill the mounting holes on the wall. Add…
- Downloads
- 273
- Likes
- 19
- Rating
- 4.5
P
PrintablesGyörgy Balássy
Fly Swatter
This is a fly swatter replacement part that can be attached to a telescopic handle. If it does not fit into your handle, use the attached .f3d and .step files to modify the model. The model does not contain the holes, here's how you can…
- Downloads
- 241
- Likes
- 23
- Rating
- 5
P
PrintablesGyörgy Balássy
Cam clamps
This is a set of cam clamps primarily designed to be made from 18mm and 10mm plywood. Most parts are easily cut square parts, however the lever can be easily 3D printed. The clamps are designed to be run around a square tubing. I attached…
- Downloads
- 208
- Likes
- 25
- Rating
- 0
P
PrintablesGyörgy Balássy
MicroUSB Pinboard Case
This is a case for Conrad Bannik's Micro USB DIP 5-Pin Pinboard . Note that the screw holes to mount the board is offset with 1mm because the Conrad's model does not fully match with the pinboards I have. The model is parameterized, so if…
- Downloads
- 169
- Likes
- 23
- Rating
- 5
P
PrintablesGyörgy Balássy
Silhouette Cameo 4 custom tool holder
This is a custom tool holder for the Silhouette Cameo 4 desktop cutting machine. This holder fits into both socket 1 and 2. The hole in the middle is 4 mm diameter, and you can use an M3x5mm brass insert and an M3 screw to lock your tool…
- Downloads
- 166
- Likes
- 35
- Rating
- 5
P
PrintablesGyörgy Balássy
3D Night Light Base
This is a base used to hold a 3mm thick acrylic plate for a 3D night light. The opening on the top is 28 mm wide and the recommended depth is 10mm. NOTE: This is just a base, does not contain the acrylic part. Print instructions…
- Downloads
- 131
- Likes
- 27
- Rating
- 0
P
PrintablesGyörgy Balássy
Washing machine drain tray - very low profile
Use this tray to drain your washing machine without flooding your room. It has very a low profile, it requires only 12mm. Print in standing position without supports. I attached the model in Fusion360 and STEP format, feel free to…
- Downloads
- 124
- Likes
- 31
- Rating
- 5
P
PrintablesGyörgy Balássy
Sci-fi project box
This is an electronic project box with these features: can host a 70×50mm prototype PCB, and mount it with M2 screws can host a 85×85mm acrylic sheet (needed to be glued in) has 3 holes for 5mm LEDs has a wall hanger hole at the back has…
- Downloads
- 107
- Likes
- 58
- Rating
- 4
P
PrintablesGyörgy Balássy
Apollo 12 SCE to AUX switch
This is a piece of art remembering the lightning strike incident of Apollo 12 and how John Aaron saved the mission on November 14, 1969. Read the whole story here: How Curiosity, Luck, and the Flip of a Switch Saved the Moon Program…
- Downloads
- 92
- Likes
- 23
- Rating
- 0
P
PrintablesGyörgy Balássy
Drain filter cover (115mm quare)
This is a filtering cover for a 115x115mm square drain. Print instructions Use 100% infill or enough horizontal layers to make it solid.
- Downloads
- 86
- Likes
- 7
- Rating
- 0
P
PrintablesGyörgy Balássy
HDD 2.5" case for Ewent USB adapter
The .3mf file includes the bottom and the cover, print them separately with 0.3mm layer height and no supports. The HDD and the Ewent EW7019 adapter should be quite a snap fit into the case, but you can use M3 screws to mount the hard…
- Downloads
- 67
- Likes
- 6
- Rating
- 0
P
PrintablesGyörgy Balássy
IKEA Fixa hole saw thin grommets
These are insets you can put into the hole you drilled with the IKEA Fixa 5-piece hole saw set . These insets are designed to be very thin and their height is for 16 mm thick boards. In case you need grommets for different board…
- Downloads
- 66
- Likes
- 5
- Rating
- 5
P
PrintablesGyörgy Balássy
Skadis digital angle finder (protractor) holder
This is a holder for Ikea Skadis pegboards to hold a digital angle finder, aka. protractor. You slide in the tool from the top right, so you need some place on the board right to this piece. I printed it with 0.3mm layer height without…
- Downloads
- 57
- Likes
- 9
- Rating
- 5
P
PrintablesGyörgy Balássy
Universal Night Light Base
This is a universal base for night lights with a rechargable battery and a microUSB connector. Just connect this base to your phone charger, then disconnect it and use it wherever you want with your preferred lamp shade. Print…
- Downloads
- 55
- Likes
- 12
- Rating
- 0
P
PrintablesGyörgy Balássy
Depth stop for countersink drill bit
My cheap drill bit set came with a single depth‑stop collar that only worked if I removed the grub screw holding the bit and the microscopic parts loved to roll away the moment I touched them. So I designed a smarter, frustration‑free…
- Downloads
- 47
- Likes
- 13
- Rating
- 0
P
PrintablesGyörgy Balássy
Infrared Thermometer (aka Laser Temp Gun)
This is a "case" for a battery-powered infrared thermometer with a laser pointer built with a Wemos D1 Mini ESP8266 microcontroller and an MLX90614 sensor. By its data sheet this sensor has high accuracy of 0.5°C over the 0 … +50°C…
- Downloads
- 45
- Likes
- 10
- Rating
- 0
P
PrintablesGyörgy Balássy
Drawer handle, easy print
This is a drawer handle that mimics the style and dimensions of the Forest E002-096 handle. The big difference is that it is not round but chamfered, so after rotated to its side it can be printed without supports. You can mount it with…
- Downloads
- 41
- Likes
- 3
- Rating
- 5
P
PrintablesGyörgy Balássy
Pressure roller from paint roller
Use this model to convert your existing paint roller to a two handed pressure roller. The model is parametric and I attached the Fusion360 file, so if your pressure roller's shaft has different dimensions, you can customize the model…
- Downloads
- 39
- Likes
- 16
- Rating
- 5
P
PrintablesGyörgy Balássy
Customizable button soccer player (gombfoci)
"Button football is a football (soccer) simulation game played on a table-top using concave "disks" or "buttons" as players. Board dimensions, markings, and rules of play are modeled to simulate standard football. It is popular throughout…
- Downloads
- 33
- Likes
- 2
- Rating
- 0
P
PrintablesGyörgy Balássy
Skadis marking gauge holder
This is a holder for Ikea Skadis pegboards to hold a marking gauge woodworking tool. I printed it with 0.3mm layer height without supports, but if your bed adhesion is not perfect, you may want to add brims around the hooks. I designed…
- Downloads
- 30
- Likes
- 7
- Rating
- 5
P
PrintablesGyörgy Balássy
Wolf-Guard smoke detector mount for Original Prusa MK3S
Use M4x12mm (or shorter) self tapping screws to mount the smoke detector to this holder piece. After printing and mounting test that it does not block the XYZ calibration!
- Downloads
- 26
- Likes
- 0
- Rating
- 0
P
PrintablesGyörgy Balássy
Weeding/Dentist Tool Box
This is a sliding lid box to store a dentist tool I use for weeding vinyl. It is not fully child-proof (there is no such thing), but you can use 10mm diameter, 1mm thick magnets to make sure that the tool does not fall out even if the lid…
- Downloads
- 23
- Likes
- 5
- Rating
- 0
P
PrintablesGyörgy Balássy
Label tape cutter (12mm, Dymo LetraTag)
Use this cutting guide to trim 12mm label tape (used by for example Dymo LetraTag) perfectly parallel and perpendicular with your hobby knife. Note that the parallel lines are not symmetrical so they provide 2 different cutting width. I…
- Downloads
- 21
- Likes
- 11
- Rating
- 0
P
PrintablesGyörgy Balássy
Airbrush holder on the air compressor - thinner, wider remix
This is a modified version of the airbrush holder published by Perec who was nice to share the model in an editable file format. This remix fits better, easier to print (no support required) and looks a bit nicer.
- Downloads
- 20
- Likes
- 2
- Rating
- 5
P
PrintablesGyörgy Balássy
Spacer for DSC PK5500 keypad
This is a 6mm spacer that you can mount behind your DSC PK500 keypad to hide the cables of your alarm system. It has the same screw layout as the original keypad backplate. Feel free to modify the parameters in the attached Fusion360 file…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesGyörgy Balássy
TowerFall Ascension Championship Trophy
This is a trophy designed for the winner of a TowerFall Ascension championship.
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesGyörgy Balássy
Keyhanger with backboard
This is a remix of NilsOla's Small Keyhanger on Thingiverse with these changes: I filled the screw holes, because I want to mount this to the wall with double sided tape. I added a backboard, because I want to protect the wall from…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
PrintablesGyörgy Balássy
Small ladle shovel spoon
This is smaller than a shovel, and larger than a spoon. Can be useful to clean the rain gutter or as a measuring spoon in the kitchen. The handle part needs support for printing. I attached the model is STEP and Fusion 360 format, feel…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesGyörgy Balássy
Ferrero Rocher box window bird feeder
This model is to reuse the transparent Ferrero Rocher plastic box as a bird feeder. You need to print 2 pieces of this model and mount to the window with 4 suction cups (I bought them in the dollar store). I attached the model in Fusion…
- Downloads
- 10
- Likes
- 7
- Rating
- 0
P
PrintablesGyörgy Balássy
Skadis razor blade scraper holder (Workzone)
This is a holder for Ikea Skadis pegboards to hold a Workzone (Aldi) razor blade scraper. I printed it with 0.2mm layer height without supports, but if your bed adhesion is not perfect, you may want to add brims around the hooks. I…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesGyörgy Balássy
Floating Hueforge frame (lighter, faster)
This is a remix of OtherDogDesign's Hueforge picture frame. The difference is that I removed the majority of the back plane to save 38% filament and 33% printing time. Thanks OtherDogDesign for publishing the model in Fusion 360 format to…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesGyörgy Balássy
Magnum, P.I.
Inspired by Tom Selleck's legendary role in Magnum, P.I. , this sculpt captures the charm, confidence, and iconic mustache that made the character unforgettable. The model was created as a tribute to one of television's most memorable…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesGyörgy Balássy
Pattex glue bottle holder
If you don't like violently shaking your Pattex glue bottles print this model and it will hold 3 of them upside down, always ready to use. I tested with 250g glue bottles. The 3mf file contains an object with 2 parts: the body and the…
- Downloads
- 5
- Likes
- 4
- Rating
- 0
P
PrintablesGyörgy Balássy
Resin bottle holder
This simple stand ensures that a 1kg resin bottle stands still and does not tip off even when it is almost empty. You can print and use it as is, or fill with concrete to make it heavier. I tested it with Anycubic resin bottles. I…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
These are all currently available results.