Counting matching models…
A side-mounted spool holder for the Ender 3 v2. Will most likely also fit the original Ender 3 and 3 Pro as it just needs the 40x40 extrusion behind the left of the machine to support it. This holds the spool directly left of the extruder…
A motorcycle or racing helmet with optional visor. The visor can be opened or closed. You should be able to print the helmet without support if your bridges are good. It might need a little post processing if you get sagging filament on…
A wall hook for the Lego Porsche RSR to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The holes are…
Giant minifigure toilet roll holder. These are about 8.33 times as large as normal minifigures. Much the same in appearance as the source model I remixed from, but updated to improve construction and ease of assembly. I also downloaded a…
Robocop Helmet Pieces should press together but you may prefer to glue them. The visor is optional and will show the “face” when omitted. Parts should appear orientated in the best way for printing. I used a skirt on the chin as it kept…
A wall hook for the Lego Ferrari to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The holes are sized…
This is a replacement wall mount plate for the control panel of the popular Chinese diesel heaters, as used in many self-built motorhomes. It clips the control panel into place the same as the original mount using the same screw…
A wall hook for the Lego Sian to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The three prongs on the…
Oscars Award statue, 100% size. Print the figure in gold and base in black. The total height of the gold figure is about 270mm and the assembled model is about 340mm tall. I've printed in PLA without supports and there's minimal sag on…
My own take on the designs that came before me. MANY thanks to their hard work and generosity in providing the models. My main goal was to make my parts easier to print and fit. I've included parts diagrams and photos of the three main…
Helmet for Dummy 13. Created in the style of a Cylon Centurion from the original series of Battlestar Galactica. A single-piece design that should print fine on it's side, as supplied, with supports from the build plate for the cheek and…
Custom wheels for the Countach, loosely based on a real deep dish design. I've made the rear rims have a deeper dish than the front, but fitted on the same size tyres. Not too much realism as it's Lego! 4 x tyres (tires) in black 4 x…
A watch stand for my Fossil Gen 5 (Carlyle) although it may fit other models with the same charger size. I've since confirmed this also fits the charger for the Fossil Gen 6. This holds the watch angled 45 degrees forwards so should show…
A motorcycle helmet for the Carbon 13 Type-M. It's a snug fit to prevent wobbling at high velocities. The visor is poseable.
A side-mounted rear-facing spool holder bracket. This slides onto the lower left rear extrusion into the v-slots and faces backwards. The original spool holder bolts to the top and the spool sits on the outside of the machine. I've been…
A motorcycle helmet for the Carbon 13 Type-F. It's a snug fit to prevent wobbling at high velocities. The visor is poseable.
I bought some chunky lettering for the bonnet of my Discovery 1 and soon found that they were all for a flat panel, not the curved profile of my car. Here's my alternative set of letters that have a curved front and back. Printing Rotate…
Honda CBR Logo in raised 3D embossed font, suitable for CBR1100XX and possibly other models. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.1mm Infill: 20% Filament: Amazon Basics PLA Silk…
The Pepsi Bag-In-Box syrup is intended for use in drinks machines, but is the same syrup used by Sodastream to make fizzy drinks at home. There's no easy way to dispense the contents without connecting to the outlet and I've been unable…
An embossed logo for my CBR1100XX 2004 model. I traced the existing belly “flat” CBR decals and created these models to the exact scale to fit over them. The left and right models have significantly different curves, as the faring shape…
A very simple dust cap that fits most vehicles' schrader tyre valves. It takes about 1g of filament and fits cleanly. The external dimensions fit a 10mm spanner if you need one. Category: Automotive
A lego-style head and helmet designed as a car/motorcycle/bicycle valve cap. This is oversized so about twice the size of genuine lego minifigure parts. Print Settings Printer Brand: Creality Printer: Ender 5 Supports: Doesn't Matter…
I needed a fan cover to keep my fingers out. I've seen some cool looking designs but nothing that just looked right for me. I've included 3-spoke and 4-spoke versions. If it rubs the centre hub of your fan, print and fit the spacer ring…
For a more static model for display, I've avoided buying the bearings by creating some printable cylinders to replace the 6003 and 6204 bearings. You need two of each of these for the final model. I wanted to include nuts and bolts around…
Similar to original cup holders but a completely new design with extra features. I've removed the slot for a handle as this was never used by takeaway cups. Removed the insert to allow for larger cups up to about 80mm diameter TPU spokes…
Three different diameter plugs for the motorcycle frame: 44mm plug (2 needed) 38mm plug 33.5mm plug I printed these in PLA and find they fit my frame holes perfectly. They're sized to press in quite tight to a 10mm depth and have a slight…
A mesh to fit the cold air intake that leads to the cabin on an Iveco Daily Mk 4. The wire mesh that sits in the rubberised cover was missing from my van. The rubber surround was still there with 8 stubs of rubber where the mesh had been…
Secure mount for the "FLY-ADXL345 Accelerometer USB Board O6A7" on the side of the extruder motor of the Ender 5 S1 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2mm Notes: The two parts…
Some folding walking sticks come packed in a flimsy plastic bag, others come with a retaining clip. This clip is designed much like the originals, but with thicker walls and slightly chamfered edges to make it easier to fit. One side has…
Letter inserts for the recessed steering wheel logo of an Iveco Daily. I've made this for my 2011 model, but it may fit others. How I Designed This I downloaded a vector image of the current Iveco logo, capped the holes and extruded this.…
Lego-like hair (Wig 67) at 8.33 x normal size and chopped to fit the wall-mounted toilet roll holders. My holder is here https://www.thingiverse.com/thing:6128504 but it will also fit other models of the same scale. Print Settings Printer…
A protective guard that fits over the side repeater of a Land Rover Discovery 1. I have side repeaters with part number “PRC9916” lenses and these are shown in my photo. You will need supports to the build plate that will be easy to…
This mounts a Waveshare 4.3 inch DSI LCD with a Raspberry Pi3B+ inside an Ender 5S1 in the original screen mount location. It's quite likely to also work with a Pi4, but I haven't checked. Once Klipper is installed on this printer, the…
A mostly press-fit clock housing. I've used red and black PETG in my photos but PLA should be fine. I've indicated the colours I used in the part names for reference. Place the Diffuser on the outside recess of the Case Front Press the…
This cover-plate for UK wall-mounted light switches will hold a SONOFF SNZB-01P Zigbee Wireless Switch without the magnetic plate. It's held in place by friction, so a snug fit. Print Settings Printer Brand: Creality Printer: Ender 5…
These plugs conceal the holes when you remove the rear passenger grab handle. You will probably need some replacement M6 bolts for the front screw holes, as the original ones may not have full thread to screw in far enough. I'm not sure…
A wall hook for the Lego 24 Hour Racer to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The holes are…
A cover panel for the window and heated-seat switches in a Land Rover Discovery 1. The original part has prongs that press into the supporting plate and these are usually easily broken. I've designed my panel to print without support and…
I took the wahl #3 (10mm) attachment and scaled the width and length to fit the nikai nk-1879 hair clippers. I had to modify the rear clip slightly, and adjusted the final model to get exactly 10mm depth between the base and the blades.…
When you remove the original rear indicators on a Honda CBR1100XX it leaves a large flat plate with two holes. This adapter covers both holes and lets you mount a round-based aftermarket indicator onto the bike with the wires fed through…
I've created a simple adequate pair of door hinges that offer the same benefits of other great hinges that have come before, but reduced down to adequate strength and size to save on print time, material and frustration. I also prefer a…
I made the Fly ADXL sensor a more permanent attachment in my printer so here's a more complete mount that covers the board, clamps a little more securely and fixes with two M3x10 cap head bolts to the same location either side of the…
A Lego-like crash helmet at 8.33 x normal size and chopped to fit the wall-mounted toilet roll holders. My holder is here https://www.printables.com/model/530208-lego-man-toilet-roll-holder but it will also fit other models of the same…
Flat plug to push into a hole in the centre of the yoke. It's normally capped, but I bought my bike with this missing. The previous owner probably mounted a sat-nav here. It's an easy fit, not tight. You might want to allow some…
Some chunky lettering for the rear hatch of my Discovery 1 300Tdi. They may apply to other models and engines. Printing Print flat . I've supplied the DISCOVERY as two models "DISCO" and "VERY" so it'll fit smaller build plates without…
This is a shallow tray, 4cm deep, that fills half of the armrest storage box of the Discovery 1. You can print two of these to completely cover the hole. They sit at the top of the storage where you can keep the essentials, like tissues…
This twist-in clip will hold the bonnet stay (the long metal pole) in position when the bonnet is to be closed. It pushes into a square hole measuring 8.5mm x 8.5mm and twists about 50 degrees to lock in place and align with the bonnet…
This model is a complete mount and fascia for fitting a single DIN headunit in the Land Rover Discovery 1. It might require some modification to the existing surround, as my car had broken plastic that I've excavated to give me access to…
Based on an original rubber gasket (since perished) this is direct replacement part. It's the same dimensions and I suggest you print from a flexible material as this does need to stretch over the plastic housing a little until it's in…
A printable decal for the automatic gearbox indicator. This prints facing downwards with a single layer of solid material before the hollowed-out numbers and letters, giving a flat appearance with some transparency. I printed this in…
Eye for a Dalek mk3 with white ring. Designed to fit onto a 30mm stalk. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 20% Notes: The body can be printed face upwards, as…
WORK IN PROGRESS 23-Mar-2026 - Updated with better rounded edges, orientation and button function. A retro mouse shell that can house a Logitech M185 innards. This recreates the look and feel of an Atari ST mouse but with the additional…
A new version of my watch cradle for a non-smart watch or simply without a charge pad. This has been designed for a Fossil Lux Luther but any watch of 44mm case and 22mm strap should fit. The top surface has been angled slightly less as…
A single-piece print that will print well with or without supports. I've used supports in my example photos that help to keep the puck-recess accurate although it should print well on most printers without. The original USB charging base…
Two-piece feet that push-fit into a single or double v-slot (20/40). They're 40mm diameter legs with 35mm hexagonal feet, adjustable between 29mm and 39mm height. These will print as orientated without support. I've used 20% gyroid infill…
Using a Logitech M185 innards, you can recreate your misspent youth with a new Logitech 3-button C7. PARTS: Logitech M185 (donor mouse) M3 x 8 countersunk screws (six) PRINTING; Buttons - To get the best finish I printed the buttons and…
If you've fitted an alternative extruder with a runout sensor at the toolhead, you will have unplugged the run-out sensor at the rear of the K1 Max. This removes it from the filament path, making it smoother, whilst keeping the bowden…
On my Land Rover Discovery the wheel nuts don't fully lock down the spare wheel, allowing it to move slightly. These washers fit under the nut and keep it steady. Dimensions OD: 38mm, ID: 30mm, thickness: 5mm Under no circumstances use…
A simple replacement cover for the battery compartment of two AA batteries. The cover measures 58mm x 40mmm, has two hooks on the one side and a sprung latch in the centre of the other. I've left a slot in the cover to allow some…
Parts Required: You will need to have an original Range Rover Classic analogue clock. I used part YFB 100 410 - black face although I believe YFB 100 460 - green face is the same physical size. Optional: For the "With glass" version,…
A duplicate of the original plastic surround that fits a BBC Master around the front cartridge slots and holds the internal speaker. It should be a good fit and almost identical to the original, but ready to be remixed for your needs…
A flat charging pad to contain a wireless charging coil and circuit. The electronics are cheap (currently £2.11 on aliexpress) and supports any QI device that can lay flat. The pad measures 80mm x 90mm x 9mm when assembled. You will also…
A click-together case for a TruMouse ArcMouse v2, as used on an Acorn Archimedes. I strongly suggest using a strong but flexible plastic such as PETG, as this is a firm fitment that would probably snap PLA.
Purpose: I created this model to make sense of the dimensions and plan a build. I've modified some of the parts to make them easier to print, but generally they will need supports. It's work in progress, so i'll add to the parts list for…
A direct replacement cavity for the small storage shelf. This fits in the same way and clicks into the same latches but offers more room and can be modified for future upgrades. It's a full height box all the way to the back with a hole…
These are all currently available results.
