Counting matching models…
Updated: MMU version so you can print the Voron logo in-place. Follow this guide to calibrate your printer to do it Updated: Faceplate now can support both 3010 and 4010. Put heated inserts in the correct location depending on what fan…
Print 2 to put on both sides of the Gantry This will assist you to ensure the gantry is parallel to frame Tested on both Odin F5 and Sovol SV01 Pro Print
Well, why wasting money on a shaper on Amazon while you can print it yourself I can't find anything that's similar to what I designed here so I made one myself When importing the model to your slicer, split part to objects so you can…
This is the design to let you mount the Biqu Micro Probe on your X Max 3 This design is based on the work of SmileyMan3D , which he did a guide on thingiverse . First, you'd need to adjust the wiring on your micro Probe. You need to swap…
Fan shroud for 5015 Blower fan on the SV01 Pro printer Note: - Print on the side (as shown in photo) - Add custom supports for the overhang Overhang test model: https://www.thingiverse.com/thing:419860/files From the test, the shroud…
This design was a remix of the H2 Rail upgrade for Ender printer and Vortex Shroud system for H2V2 on SV01Pro All thanks to the excellent model of the H2 on Grabcad to make this change as well as the design of the Vortex from FLYN…
This is the holder for the Nevermore v6 inside the Qidi X-Max 3 Much easier to replace filter cartridge thanks to the great design from the Voron team If you need to print the Voron Nevermore v6, print this for the cartridge part…
Why bending yourself to observe the first layer lines?? Now you can just set, print and observe it in the comfort of your chair/bed… Preparation To get the nozzle cam working on your xmax3, if you already have a camera, you'd need to…
RPi 4 case. Can be mounted on any extrusion slot with M3 T-nut Can be oriented Vertically or Horizontally Here's the BOM to fully assemble the unit: Bill of Materials (BOM) Pi 4 2x M3 T-nuts 2x M3 x 8mm Socket Cap screws 2x M3 heated…
NOTE: BEFORE YOU ARE GOING DOWN THIS ROAD, MAKE SURE YOU KNOW WHAT YOU ARE DOING BEFORE SWAPPING STOCK BOARD. WARRANTY WILL BE VOIDED This is the mount for the Manta M8P or M5P to be used on the X Max3. BOM: 4x M3 dia4.5mm Heated inserts…
If you want to put use canbus on your printer with the H2 Extruder and the MAD Shroud ( LINK ) You will need 4x M3x4mm OD 4.5mm Heated inserts 4x M3x20mm Socket cap screw Mount the bracket on the 4 opening holes on the MAD Shroud Base Now…
Since I couldn't find anything for the Pi Cam mount inside the Voron, I made my own Here are the BOMs: 6x M2x3.2 heated inserts 6x M2x8mm Socket Cap screws 4x M3x20 Socket cap screws (to replace the 4x M3x16 SC mounting the gantry to the…
Case for the Pico to stay inside as well as the accelerometer to mount on top Easier to move the Portable Input Shaper around The Lid can be modified to fit the ADXL345
BOM: 2x M3 heated inserts 4x M3x8mm Socket Cap Screws Fysetc ADXL. Follow the guide from Fysetc to install klipper on the Portable Input Shaper https://github.com/FYSETC/FYSETC-PortableInputShaper Mount the ADXL on the bracket and let the…
2 model of brackets to put your ADXL and MPU on the H2 Shroud (https://www.printables.com/model/215739-vortex-system-for-biqu-h2-v2-sovol-sv01-pro) on SV01 Pro system Klipper now supports both ADXL and MPU sensor so print the bracket that…
This is the modification to replace the stock TFT screen with the Touchscreen TS35 with Mks Pi mounted on the back. The design has a 3510 24v fan mounted on the side to cool both the Pi and the screen. It also has built-in cable…
These are all currently available results.
