Counting matching models…
I wanted a holder where I could grab just the driver and bit set I wanted, so I came up with this! The main 1x6 driver holder can optionally hold two rows of bits around the shank of the driver, or you can use the 1x1 bit trays if that's…
Inspired by this design . I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the…
It seems that some people are getting a CAN cable with larger overmolding that doesn't fit the mount included in the EBB SB2209 repo. This is not a perfect fix, but it's good enough. I've included STEP files for remixing!
I'm listing this as a remix, although I've re-modelled it from scratch (with changes) so I could include the STEP files. Brush Size: ~46mm wide, ~11mm deep, cut 10mm from the bristles - I used the larger of the brushes from this set . The…
Optionally you can print in muticolour if you have a MMU. Just drag both STLs into your slicer and say “yes” when it asks if these are multiple parts of the same object. Print in something impact resistant (PETG, ABS/ASA, nylon,…
Like the original, this lets you store your base iron, included tip, and 8 more tips (both the long and short set). Unlike the original, I've removed the screwdriver slot in favour of slots for the official power supply and iron stand.…
Mounts your MMB to your ERCF with a topper to keep your wiring away from your encoder cart. The alternate topper covers all the endstop ports - they're still usable, but it's a tight fit and I don't use it. Be aware that the BTT MMB…
A very simple thickness swatch with clear labelling and a hole gauge. The hole has the same diameter as and is offset by the thickness of the swatch (eg: the 3mm thick swatch has a 3mm diameter hole who's centre is offset 3mm from the…
Printing: print at 100% infill (seriously) in PETG, ABS, or similar (no PLA) Model selection: there are two models included - one that fits over the existing belt retainer and another that replaces it entirely. NOTE: I have not tested the…
BOM 4x #6 x 5/8" (16mm) thread forming screw, as used in the RepRack system You need 4 screws to attach the ECAS holder as well as the rear spacer. You only need 2 if you're omitting the rear spacer 1x PTFE ECAS fitting Assembly Simply…
Why? If you have a 1UP rack there's a 99% chance your license plate is obscured. I know that's bad, but I wasn't about to pay $125 CAD for the basic plate holder from 1UP. Instead, I made this! Read Me Something something provided as-is,…
Summary Not all forks support the OneUp EDC. Some have ovalized steerer tubes or a minor internal diameter that's just too small for the full storage container. This adds back the storage container with 2mm shaved off the diameter. It…
Updated the original to fit this cheap Amazon dial indicator . Also made it wider to support 203mm rotors and added a new contact surface that uses a 12mm bearing to prevent the indicator tip from getting caught in the rotor. The ball…
Overview: This enclosure fits a Manta M4P and 2 4010 fans to your Ender 3 V2. This model uses M3 heat-set inserts to help secure the motherboard and top pieces - you'll need to edit the STEP files if you want to bolt directly into the…
READ ME There are a few important considerations/tips/changes you'll have to make to accommodate the BexGears kit. This applies to both the original BexGears Prusacaster model as well as this remix: The BexGears bridge is ~6mm closer to…
Use this replacement X endstop cover to more securely hold cameras, lights, cables, whatever! You need 12 M3 heat-set inserts (mine are 4.5mmx5mm) and the rest of the hardware comes from your existing endstop cover. Print in whatever you…
General Details I've included two models - one that uses heat-set inserts and one that threads into plastic. The heat-set inserts are preferred, but you do you. My inserts are 4.7mm in diameter and 5.6mm tall so that's what the model is…
I like to print these at faster speeds and in lower resolution. Definitely recommend PETG, ASA, or something else that can take a hit. No supports needed.
Print in PETG, ABS, ASA, or similar. Attach the camera with an M3x20 or M3x25 machine screw.
Holds your Magicshine MJ-6118 battery in a standard MTB bottle cage location! The design has small detents to help hold the battery in place but still lets it slide out easily for charging. Optionally includes a cable routing channel if…
When I go biking I throw my Insta360 ONE RS in a small bag with a spare battery and accessories. I was worried about the lens getting scratched or the camera accidentally turning on and leaving me with no battery, so I created this simple…
Use at your own risk! It's been working well for me but I can see how it could be a bad idea to clamp your brakes to your bike with some plastic. I've included STEP/Fusion 360 files in case you need to remix it for a different style of…
IKEA LACK tables aren't tall enough to support many 3d printers, but printing taller supports takes ~50 hours in many cases. Instead, I used 61mm (~2") ABS pipe that cost me $6 and let me cut my printing time in half. You can cut the pipe…
I bought this cheap nozzle tool set and wanted to organize it with Gridfinity. Thought I may as well put this out there in the off chance someone has the same kit
Uses the heatsink fan mount points to connect an ADXL to the Sprite Sylph. Parts needed: 4x M3 heat-set inserts 2x M3x25 machine screws 2x M3x10 (ish) machine screws 2x M3x5 machine screws Assembly: Print ADXL mount and bed spacer Press…
Same instructions as the original model, just with heat-set inserts where you'd otherwise be screwing into plastic. Here are the locations of all the inserts: Heatbrake fan shroud: Two on side where cable strap screws in One on bottom…
Overview My Magicshine light came with sleeves for different sized handlebars, but you don't use a sleeve for 35mm bars which causes the light to mark the bars and there isn't enough friction to hold the light securely when torqued to…
A simple STEP file of a Magicshine MJ-6118 battery pack. I'll tell you right now that it's not millimeter-perfect, but it was good enough to make a battery mount for my bike (with a 0.25mm offset).
Per the instructions in the listing , you need to slightly modify the guidler model to fit this new gearset. This saves you the trouble
These are all currently available results.
