Counting matching models…
Had some joint space after a few days (probably as pool settled) so I want to hide it. print using PETG print as oriented - no support needed use brim For fine-tuning to match your top edge:…
!! Work in progress !! Recent clean macro is always available on "Elegoo" Discord channel added lowered version lowered version 2 - higher plate guide, align with bed in Y axis, all other versions abandoned added holes for securing wiper…
Wanted to hide skimmer screws, but there's no cheap shop nearby selling the cover. Also hate when there are water toys blocking skimmer flap, so I made cover for Hecht 30003 skimmer with grid (big enough for leafs). This grid will block…
When you break one of the arms, you can print replaceable one. Or you can split original, print center ring only and 10x replaceable arm and you are ready to go. You can import my “overkill” print project to OrcaSlicer (just change…
Mod for the pico MMU from LH. Inward PTFE tube coupler is M10 version, outwart PTFE tube coupler is M6 version.
Made bracket for Cisco Catalyst C9200CX to be able to mount it to 19" rack without buying original one. Print with PETG at least, print oriented as-is. I used 5 perimiters, Honeycomb infill 20%, snug supports.
EDIT: added Ball_v3, MiVue uni holder, MiVue C380D and 752D holders with lock mechanism Ball_v3 has 6 holes around and 1 hole in the centre to release pressure when gluing together with holder Print with ASA or ABS (high temperatures…
Made holder for pool "bottom-cleaning net" using my semi-finished top rim holder. BOM: 1x every model listed here 1x plastic insulation tube 25mm (https://www.obi.cz/pvc-trubky/izolacni-trubka-tuha-en-25/p/4661948) M4x25 screw with round…
Just a quick remix - added printable holes to a few parts - print as oriented in attached files. Use all other print settings from original models. Fixed some parts alignment EDIT: 27.02.2026 - gatespacer bearing embedding made better…
print without supports as modelled body - 0.12mm layer height cover - 0.2 mm layer height In case you use tubes with OD4mm/ID2mm, you can use pins for security (against tubes slide out). Insert all 4 tubes as far as is possible (approx.…
Edit: Added "B" variant - only difference is cutouts for metal headband springs (cutouts are on inner part) I did a remix of "outer" part to be more tight: narrower hole at the bottom (13mm wide, original was 15mm) cutouts for headband…
EDIT (30.03.2025): added V2 with better “Y” position (holder depth), changed bucket slide part geometry You will need: frame mount - 2x M4x16 screw, 2x M4 washer (to not scratch frame), 2x M4 nut assembly - 2x M3x12 screw, 2x M3 nut 20mm…
2 versions od “semi-finished” holder for steel wall pools (Mountfield Azuro Vario): Version 1 (with screw joint) Version 2 (without screw joint) You can add anything you want, or you can completely redo my version - make your copy on…
Just another relay module box for "1 Relay Module" with "snap-on" lid... Lid "inner" walls are angled a little bit, so the lid should hold firmly.
Click ecas coupler to M11 reduction and screw into the base module. For removing go backwards…
Realistic Wasp Nest remix with added simple screw hole
EDIT: added Ball_v3, MiVue uni holder, MiVue C380D and 752D holders with lock mechanism Ball_v3 has 6 holes around and 1 hole in the centre to release pressure when gluing together with holder. Removed “long version”. Mazda 6 GH auto…
See pictures screw 36-37 mm long thread to left bottom motor hole add washer and m3 nut so you can fix belt tensioner position attach mounting bracket for gantry (Neptune4 version) to gear cover attach gear cover with bracket gantry to…
had no M4 heat inserts, so I modified original holder for use with classic M4 nuts added v3 with nut holes from sides removed all deprecated versions (not so precise) print without supports (or manual support on 2 outer screw holes only)…
Assembly: desolder connector from generic limit switch (https://www.aliexpress.com/item/1005004881361555.html) narrow bent pins solder from underneath (maintain the position of the cap!) screw in… BOM is the same like Lamarc's, only…
CZ: Stěrka pro odměrku 1kg nebo 2kg balení Extrifit proteinu EN: Scoop for measuring cup of 1kg or 2kg box of Extrifit protein
Modeled spare part for broken adapter on my Silvercrest hand mixer. Print oriented as is: - at least from PETG - 4 perimeters - supports - honeycomb infill (mine was 15%) - staggered seams for "perfect" surface If you want to remake it to…
Screw in PTFE coupler PC4-M6, insert tube and you are ready to go. Print as is, no supports needed, I recommend to set wall printing order to “Inner/Outer”. If you plan to use PTFE tube with OD4/ID3mm, you can drill 3mm hole into PC4-M6…
I have Marimex BlackStar6 pool filtration several years and I noticed that 6-way valve/container seal (no. 9 on the image) is crushed and I have to tighten the collar almost to the stop. I wanted to buy new seal, but I found none with…
print as described in SilencedFrost version + add support for servo holder pillar cover for screw pillar cosmetic fixes quick/dirty remixes of autoclippy servo holder (ECAS04 and UBBI versions) autoclippy support leg for better front…
Print as oriented, 3 walls, 15% Cross Hatch infill, supports only under snaps and snap hook. Remove 2 original screws from back and 2 original screws from bottom covers of MMX, attach holder and fasten it with 4x "cap head" M3x8 screws.…
Table stand for 1 or 2 flowmon sensors with hose distance of 33mm. Ideal for use with "Robopípa". BOM: - 1x Stojanek - 2x Distance_velka (or hexa spacer columns from PCs) - 4x heat-insert M3 OD5 L4 (no need if you use hexa spacer columns…
V2 - easier to mount, easier to maintenance. Assembly: - solder cables from "inner side" of the pins - see first image - remove the black spacer from pins (not needed anymore) - insert pins into holes - slide-in the cap. Changes to…
Easily attach and secure Tenda SG105 to Multiboard (Multibuild) grid. horizontal / vertical version securing snaps for vertical version to avoid slide-off Vertical mounting: attach Tenda SG105 onto two pegs, slide it "to the end" snap-in…
Podložka, která se může vložit mezi nový okapový žlab a starý hák, pokud nejde hák narovnat přesně do pozice žlabu (je níž). Základna se "obtočí" okolo žlabu, výstupky se opřou do háku - nutné změřit mezeru (3 hodnoty - 2x kraj + střed).…
These are all currently available results.
