Counting matching models…
The Stand This foldable book stand is designed to make learning more comfortable and use desk space more efficiently. The design in question, went through multiple iterations. This final version is robust and stable enough to even hold…
Oogie Boogie Figure Introduction I created this figure mostly to practice sculpting in Blender. And since it turned out alright I thought I would share it on here. Since Oogie Boogie is basically a sack, the model can be printed easily…
I created this badge holder as a replacement since my original holder broke. I printed the model you can see in the pictures on a Prusa MK3S+ in PLA without any issues. However I noticed that the cards fit slightly better if the holder is…
Print it: You can print the windows with transparent PLA and the rest with black PLA or another color of your choice. I printed the parts on a 3Drag with a 0.35 nozzle and a layer height of 0.17mm. Normally you won't need support nor…
The model prints without supports. I used TPU and printed it with a layer height of 0.2mm. I guess that bigger layer heights also shouldn't be a problem. Just make sure that the material you use withstands the temperatures inside the…
This simple bookmark features a representation of Great A'Tuin and a quote by Terry Pratchett. The design of the Great A'tuin was inspired by the works of Paul Kidby. More of his works can be found at: https://shop.paulkidby.com/featured/
Introduction This is a locket which can hold two pictures which are created by toner transfer onto a 3D printed base. The pictures are fixed without using glue and can easily be swapped. Printing Instructions All the pieces can be printed…
I created these screws as a replacement for the original ground anchors of the Ecovacs Goat G1 robot lawnmower. I printed the model you can see in the pictures on a Prusa MK3S+ in ASA without any issues. No need for support. Make sure…
For an optimal print result, consider adjusting the following settings in your slicer: Orient the model, so that the hook part points upwards. Use supports, but on build plate only. Make sure that the “Top contact Z distance” is large…
A simple cookie cutter, to create cookies as shown in the pictures. Happy holidays!
Filament Joiner For filament with a diameter of 1.75mm. It also works wih homemade pultrusion filament. Build Instructions What you need 6x M3 Heat Inserts 4x M3x14 Screws (longer screws will work as well) 2x M3x6 Screws (Also here,…
The ornaments which are shown in the pictures have been printed in PLA on a MK3S+ with the following settings: Layer Height: 0.2 mm No supports No brim 20% infill That's it. Happy printing!
Introduction With these models, you can turn your sharpies into doodling spinning tops. You can choose between 4 models with different degrees of stability. Model number 1 is the least stable and therefore will usually create the…
A protective case for the Kobo Clara eReader. I printed the case shown in the pictures in TPU with a layer height of 0.2 mm and an infill of 20%. The TPU I used has a shore hardness of 98A. If you want to use TPU of a greater hardness, I…
Introduction I created various small badges which can be dealt out to students after completing a workshop or for special achievements. You can attach the badge with a lace however you see fit. Alternatively, the badges can also be used…
This is the body for a BugBot, a small robot with a coin cell and a vibration motor. It's a fun little project for kids and is inspired by the popular BristleBots. After having build the robots, they can race against each other on an…
A simple desk organizer with 3 tubes and a small tray. It's very easy to print and requires no supports. If you want to have something modular and portable, check out my other desk organizer design:…
Model Description Custom chickenhead-style replacement knobs for Roland SP404, designed as a two-part assembly to fit the indented potentiometer area while maintaining the classic aesthetic of vintage guitar amplifiers. Build Instructions…
This is a simple dice box which fits nine standard 16mm D6 dice. General The box consists of three parts: the case the lid the falcon icon The falcon is for decoration only and does nothing with regards to functionality. Printing I…
Description: This distance piece, together with a M3 nut and a screw serves as a spacer for a PCB in order to attach the PCB to a surface. I recommend to print at least 4 pieces per PCB. For the rest, I hope the pictures are…
Piantor Custom Case Introduction This is a 3D-printable case for the Piantor keyboard from Beekeeb: https://shop.beekeeb.com/product/piantor-keyboard-kit/ Compared to the original case from Beekeeb, it has (among others) three main…
Introduction As so often, this design came to life as a fix for an issue I had. My desk became more and more disorganized as my collection of pencils, markers and stuff in general kept on growing over the last few weeks. In order to…
Adjustable Microphone Holder Introduction This is a fully 3D-printable microphone stand with corresponding clamps for different microphones. If you need an additional clamp for a specific microphone model, feel free to let me know in the…
Introduction This pick holder is one of my first designs completely done in FreeCAD. My goal was to design it in a way that it securely attaches to most straps and can hold most types of guitar picks. The design is parametric, so that you…
Piantor Transport Box Introduction This is a 3D-printable box for the Piantor keyboard from Beekeeb: https://shop.beekeeb.com/product/piantor-keyboard-kit/ For the box to hold the boards snuggly, you need to use the following case:…
Introduction My goal was to design this pick holder it in a way that it securely attaches to most microphone stand (and any other stand using round profiles) and can hold most types of guitar picks. The design is parametric, so that you…
These are all currently available results.
