Counting matching models…
SE3D Toolhead Cover for Elegoo Centauri Carbon Before you grab this version, check out v2.0 . This is a redesigned toolhead cover for the Elegoo Centauri Carbon that improves both print quality and day-to-day usability. Key improvements:…
Easy-Install Hinges for Your Centauri Carbon Side Panel Tired of removing the whole panel just to get inside your printer? These side panel hinges let you swing open the right-hand panel of your Elegoo Centauri Carbon like a door, so you…
This spacer helps reinforce the edges of the panel for mounting hinges or providing extra room for an internal spool holder. Recommend knurled heat-set inserts with this spacer unless you select the M3 nut version. If you have never done…
This mount fastens to the top M3 screw hole for the wiring harness anchor on the right rear of the ECC. There is a hole for refastening the anchor point for the harness in the model. However, it is not required since the design of this…
This Centauri Carbon panel hinge set is an improvement over our original version. The most significant improvement is the drop-pin feature, which now enables the panel to be quickly and easily removed. Designed for a 7.5 mm spacer. Here's…
Before you grab this one, check out v3.6 . v3 of the internal spool holder. For the most recent compact version with a truncated end stop, I've added 2mm of length. This will work fine for anyone with a 7.5mm spacer or larger. It will…
Mount up to 6.5 cm wide 1 kg spools inside your Centauri Carbon. Print two each of the 5 mm vertical and horizontal spacers for the right-hand wall. You may fit the spool without removing the studs but that will require that the bed is…
Replaces the original threaded version with a ¼ turn twist lock. Moves the spool up slightly and offers reduced rolling resistance for smoother filament feeding. Works with 51 mm center diameter spools Will take a spool up to 65 mm wide…
This is the first release of a model that I intend to refine further. Help test this out, provide your feedback. This assembly reduces auxiliary fan noise and improves chamber heat retention. While also preventing the buildup of hot spots…
Based on my original model, with some significant rework. Modifications are based on pain points from using it daily, and also installing/uninstalling it repeatedly.
This is just a basic 10 mm tall, 15 mm diameter grippy thumbscrew knob designed for M3 nuts. Great for many projects. This knob was originally designed for 3D printers using M3 machine screws. I matched the hardware from this assortment…
This is a generic flange plate. It may be used with other systems to extract fumes or to bring in cooler air for PLA/TPU, etc. One side effect of having this installed is that it does quiet the especially loud aux fan to an extent. It's…
This replaces the prime/purge tower and poop chute in your Centauri Carbon. It is designed to work with the hardware that is mounted on the OE component. Also included in this 3MF is the removable bin and panel cover. To install, you will…
Are you tired of that mainboard fan drone coming from underneath your Centauri Carbon? Often heard in between prints during cool-down or when anything on the printer is active. This takes the edge off the annoying sound by decoupling the…
A simple mount for relocation of the runout sensor on an Elegoo Centauri Carbon printer. The example in the photo is PETG. I recommend Elegoo Rapid PETG , particularly when printing functional printer parts on the Centauri Carbon. PETG…
Before you grab these , check out v2, which includes all three mounts with a stronger design. Functional replacement for the OEM support. The original is a glass-filled polymer and had begun to crack on both of my Centauri Carbon systems.…
Use this spacer to keep your Centauri Carbon interior cooler, mount panel hinges, mount an interior spool holder, or all of the above. You will minimally need 8x 12mm M3 machine screws. Knurled heat-set inserts (M3-4x4mm) are the easiest…
Highlights Since my first few versions weren't perfect, I present "v3.6" of my spool holder. A much more refined version that offers a smoother workflow for changing out spools. This comes after dogfooding a development version of a…
When fitted with the internal spool and side panel hinge kit the front edges of the panel often do not stay well seated. This requires the use of screws or this model printed in a very stiff material. The holes on either end are slightly…
This spacer is separated into two main sets - one set of parts for the chassis, and one for the panel. The parts interlock at joints for a secure fit when fastened in their respective locations. Once both sets are installed, the spacer…
This is just a basic 10 mm tall, 15 mm diameter grippy thumbscrew knob designed for M3 knurled inserts. These will work without the inserts but may not be very durable. Great for many projects. This knob was originally designed for 3D…
Functional replacement for the OEM support. The original is a glass-filled polymer and had begun to crack on both of my Centauri Carbon systems. A bed crash took out my other mounts. This 3MF is configured to use gyroid infill, two solid…
Now recommend this version instead: Elegoo Centauri Carbon Internal Spool Holder Gen2 by Synthetic Electron 3D This aims to address some of the shortcomings of my original internal spool holder for the CC, both from feedback and personal…
This is alpha quality. It is the first functional version. It works fairly well, but I have only printed with a 0.6 mm nozzle. Clearances may differ between nozzle sizes. You will need to remove the adhesive gasket on the top and bottom…
A simple solution for feeding filament residing externally into a Centauri Carbon using one version or another of my Internal 1kg Spool Mount Kit that is already populated with a spool. The cover snaps into the wire hole for the runout…
Uses the chassis side of the OE hinge parts, the nut, and the washers. At a minimum, the additional hardware required includes two M3x5.5 mm nuts and two 16 mm M3 machine screws . Help financially support further development of these…
The idea behind this is to minimize the vertical space used by the printer. That means no risers. But, what if venting is desired without removing the top? This is an answer to that. Testing shows that it is difficult to design a…
Reverse engineered from OE part for the FDM process. Uses OE hardware to mount. Helps to add paraffin as a lubricant when inserting the visor stem. Prevents accidental breakage of the printed part without making the visor too loose.
My second attempt at a quick-release hinge. This one operates more smoothly, is more compact, and more reliable. BoM: M4x6mm Ball Point Set Screws: https://amzn.to/48VJ1s1 M4x4x6 Heat-set Insert Kit (Kit shown is discontinued):…
These parts are modeled after the 2006-2008 Forester mount and bolt/visor-compatible with many models across Subaru’s lineup, but may not visually match or fit snugly in all cases. This was my best-selling model on Etsy, particularly in…
Originally designed for the Centauri Carbon electronics bay, this is generic enough to work in many scenarios and on many printers.
Basic mount for a 28x28mm M2-mounted camera on the Centauri Carbon gantry bearing carriage. May contain affiliate links. Using these links helps to support the creator of this model.
This is an intermediate step in the development of our quiet fan kit for the Elegoo Centauri Carbon. It allows an ElectroCookie quarter printed circuit board (PCB) to be mounted where the 4020 fan resides in the electronics bay of the…
This model works with the HelloBaby HB6240 Monitor. The HB6240 slides into the charger plug from the left side of the mount. Needed are the original charger or one of similar design and two screws with heads under 7 mm in diameter to…
These are all currently available results.
