Counting matching models…
This is my remix of @Justin_240735 's fantastic Customizable Key Holder . I really enjoyed this design and found it to be exactly what I was looking for to hold 3-4 keys (or more). However, my only problem with the design was it felt a…
AD5M Recirculating Air Duct - 5015 Fan This model is for adding a Recirculating Air Duct to the Flashforge Adventurer 5M (non-pro) to pull air through the HEPA filter and vent it back into the print chamber to maintain chamber…
Remixed liqdfire's silencer and added 14mm CCW threads to screw onto my 1911 TAC. Current version threads are a little loose but if you tighten it all the way its fits fine. Print Settings Printer: Anet A8 Rafts: No Supports: No…
Simple 3D printable tube to replace a cracked plunger tube on an X-Shot Longshot. I recommend printing this with Orca slicer and scarf seams enabled to get the best inside surface finish. Attached .stl file and a .3mf file for use in Orca…
Just a simple 3D model of a peace symbol for 3D printing. Designed it with a second raised area to give it a cool look when swapping filaments at 2mm. The necklace string hole is 3mm, but can be adjusted within the F360 archive file.
This is my remix of @Alca's SureFeed Mircrochip Pet Feeder Back/Rear Cover, which can be found on MakerWorld . I've made a handful of improvements, which are listed below. This model simply covers the back and sides of a SureFeed…
Lexus GX470 Backup Camera Mount This model is a simple 3D printable mount for attaching an aftermarket backup camera to the OEM mounting location on a 2006 GX 470 SUV. The mount was designed for use with this " NATIKA Backup Camera IP69K…
This is my " Improved " version of Matt Wilde 's " SMD Tape Organizer " adding smoother geometry on the feed ramps and more variants for 8mm and 12mm width tape. Also created variants of some rails making them overall thinner to reduce…
This is a remix of nushipwright 's " Spot Welder Box (JQ-DHJ02B spot welder) " with a handful of improvements listed below. Increased wall thickness across the board from 1mm to 2.5mm making it far stronger Added 4x M3x8 screws to avoid…
Made this strainer/intake for my turtle tank which has too low of a water level for any of the included intakes. Works well and pops right in like the original. I recommend printing this in either PETG, ABS or other food safe/bio safe…
This remix simply modifies the A2, B2, C2, D2 Side guard plates to allow the side panels to come 2mm further down to prevent the top from colliding with the side panels. NOTE: I've included a Fusion 360 Archive file for modifying the…
This is my “improved” version of Bosco Lau 's fantastic Ender 3 Magnetic Hotend . I haven't made any major changes to his design, just slightly improved fitment , printability , and the diversion ratio for the print cooling fan to more…
I slightly modified @ Ravenwreck 's small M.2 Sleeve/Case. Slightly thickened the case and moved from fillets to chamfers for easier horizontal printing. Also slightly adjusted dimensions for a bit tighter of a fit. Included Fusion 360…
Cat Shaped RFID Tag Keyfob Case Keychain - 25mm 125kHz This is a simple model I made for attaching a 25mm adhesive-backed RFID tag to a key chain. I used these T5577 125kHz tags from AliExpress and configured them with a Proxmark3 Easy…
Remixed Vince_Prints drone wall mount to remove the mounting screws and add a more visually interesting Voronoi pattern to the front faces. However, I did make a version with mounting holes if you prefer that. I'm using 3M permanent…
Just a simple thrust tube for a Dr. Mad Thrust 50mm EDF . It has an 8% Diameter Reduction at the exit which should give you a good mix of speed and and torque. The tube is 50mm long and there is an extra 20mm that couples it to the EDF,…
Remixed Planetler's silencer and added 14mm CCW threads. Also scaled the Z down to %80 to fit my 1911 better. Also, in the original post is says to print it upside down however I dont recommend doing that now as it sits flat on the print…
I slightly modified @MakenModify_170962 's Proxmark3 Easy Slim Case to fix a few minor problems I have with it, full changelog below. The biggest improvement I have made is to enlarge the cutout for the side button so you can actually…
I designed this model as a replacement foot for my Ricochet GT Mountain Bike. The existing foot was severely deformed and thus didn't hold the bike upright properly. This replacement foot simply slides on and is held in place with a M5…
EATW (ESP-Arduino-TFT-Weather) The EATW is a small device for displaying weather data that is gathered from Home Assistant via an ESP8266 and displayed on a 2.4" TFT Arduino Uno Shield. It makes use of some old hardware I had lying around…
This remix has two different parts. The first is a replacement for the “ mount-arm.stl ” which increases the rearward tilt by 25° to allow for easier touch screen inputs on a desk. The second model is a short 45° mount that allows for…
I wanted a compact enclosure for my SK35 module to offer an easy and portable variable power supply. I designed this rather quickly and it isn't perfect, but it gets the job done! It has two inputs that are connected in parallel for both…
This is a remix of @schr 's Quietmode! Flashforge Adventurer 5M (AD5M) Back Panel w/ 120mm & 4010 fan model. I've simply removed the 120mm fan as I don't need it. I've also fixed the holes in the 40mm fan mount screw locations. I've also…
This model allows easy mounting of a Samsung PS-ES3-2 speaker to a wall. I've created two versions of this mount, the original with a 10° down and inward angle relative to the wall and a second with an increased 15° downward angle. The…
This is a simple 35mm film carrier for the Canoscan 9000F flatbed scanner. When I bought my 9000F used it didnt come with the 35 & 120 film carriers so I designed this to hold 35mm film. Once the stock 35mm holder arrives I will update…
This is a simple wall mount for adhering an SMA pigtail to a wall or flat surface with double-sided tape. Should fit any standard SMA connector panel mount. I've included both a .STEP and .f3z CAD archive file to allow for easy…
These are a couple accessories for Marsgizmo's Filament Bunker which can be found at the link below. The first thing is a lid for the desiccant storage to keep the silica beads from spilling out. The thing will need to be scaled slightly…
This is a simple grip/shroud/handle for the very commonly sold online Spot Welder Pen that can be found on eBay, AliExpress, Amazon, etc. It simply slides over one end and is secured with two M3x8mm screws (8-12mm should be fine). This…
This is a remix of ppyromann's "Threaded Filament Dust Filter - Universal" thing which allows a nice fit along a 4mm PTFE Bowden tube like I have on my Prusa Mini printer. Included is a .3mf file for printing on a Prusa Mini in PLA. Print…
Mount for a PINDA or other M8 sensor. Uses one of the stock hotend shroud bolt holes so this will NOT be compatible with a stock Ender 3 . I designed this for use with Bosco Lau 's Ender 3 Magnetic Hotend which doesn't use this screw…
DJI OM 5 Shotgun Microphone Mount This is a simple design to mount a 22mm diameter shotgun mic to a DJI OM 5 gimbal. I'm using the phenomenal Comica CVM-VM20 however, this should theoretically work for any mic with a diameter of 22mm like…
Just a super simple press fit GX16-9 cover. Stl files are included as well as 123D design file. Inner diameter is 16.5mm and 18.5mm outer though there is also a 16mm and 16.3mm inner as well if it fits better for you. Make sure that when…
This is a fan mount for a Topton Fanless Mini PC. It allows you to mount a 60, 70, 80, or 90mm fan to an X2B (N5105 or N5100 CPU) Model Topton Mini PC. My device, running OPNsense even at only low load, was averaging around ~74C. With…
This mount is for attaching a Storm32 3-Axis gimbal to a F550 hexacopter frame. The arms are 66mm wide from tube to tube and the tube hole size is 8.3mm so its a snug fit on 8mm rods. There are two versions of the design, one with the…
Created this simple bracket to fix the oscillating motion on my Dyson HP01 Air Purifier. You can see in the images above the bracket that broke and accessing it from the bottom of the machine isn't too hard. However, the bracket itself is…
This is very much so a WIP, please keep that in mind! This is my take on redesigning the electronics enclosure for the Anet E10 3D printer. It features mounts for an SKR V1.3/4 board, Raspberry Pi 3 as well as cable management & an…
Simple print for mounting a Corentium Home Radon Meter to a 3" Schedule 40 PVC pipe. There are two versions of the design, the first uses 2x M3x6 screws to hold the two parts together. The other has them combined in case you don't have…
This simple model is designed to better enshroud a heads-up display (HUD) for a "Widerlife" branded HUD from Amazon . In my vehicle, where I wanted to place the HUD, I could still see the display, not just the reflection in the…
I slightly modified slibbinas NV14 wall mount to add a larger rear flat area for double-sided tape, and scaled it width-wise by 2% for a looser fit on the NV14. Attached is the F360 Archive file to modify it further.
This is my remix of Nmr2d2156 's YIHUA 936 - Pegboard Holder that I modified to fit my 939D Soldering Station. Mounting holes are for 1" spaced pegboard and I used M5x14mm screws and nuts to mount through the back. Changes from the…
This model is for mounting 2x “ Eagle Eye ” 22mm diameter LED lights. I designed this for mounting 2x red lights to the rear of my SYL-08 board to act as tail lights. Uses 2x #6x1/2" screws for mounting. Printed mine in Polycarbonate, but…
This model is for mounting an "EBike" style VESC 75100 to a bike seat post tube with hose clamps. The mount is designed for a bike tube diameter of 35mm, but this can be modified in the attached Fusion 360 archive file by modifying the…
This is a complete redesign of Beetlebeetle's original ZOHD Nano Talon Evo VTX and Antenna Mount . My remix supports any conventional 36mm² size (30.5mm² mounting holes) video transmitter, and a passthrough for a conventional…
This remix modifies the design for use with the Happymodel ES24TX Pro 1W ELRS module. The original version of this case was designed for the older non "Pro" 1W version. This is designed to replace the original main body of the module to…
This is a complete redesign of mrzipi 's " Nv14 Nirvana External battery holder 18650 " from Thingiverse. It allows you to externally mount 2x 18650 batteries, an LX-LISC-V2 USB-C charger module, and a small SPDT slide switch to the rear…
This is a record/vinyl wall mount with "Now Playing" text. I designed this in two pieces specifically so the front "Now Playing" text would be printed face down on a textured build plate to give the best surface finish and appearance…
This model is designed to hold a Flipsky/Makerbase "EBike" style VESC 75100 vertically to allow it to be filled with a potting compound to waterproof it. 2x M3x8+mm screws are used to hold the ESC in place. I used hot glue to seal the…
This is a simple printable mount that goes inside the fuselage of a ZOHD Nano Talon EVO frame. It is designed to mount a standard 30.5x30.5mm flight controller . I printed mine in PLA PRO and attached it to the frame with a bit of hot…
These are all currently available results.
