Counting matching models…
I made a clamping device for round parts. Printing instructions: support - 0,2mm layer hight, printed with one side at the bottom (the base is like an “U”), without support body - 0,2mm layer hight, printed as shown in preview spindle -…
I made the benchy as a suspended print. To make this good printable, i had to modify the benchy a little bit (hull, overhangs, …). Printed with PLA and 0,2mm layer hight. The model is made to print with 0,4mm nozzle.
Metal box for 1/14 RC Trucks Printed with PLA, without supports. Glued together with UHU plast. Category: R/C Vehicles
I made trailers for Duplo cars. A small one with one axle and a bigger one with two axles. All parts can be printet without support. As axles i used a M3 rod. You will need rods with 58mm length. The weels are glued on the rod. Printet on…
I made a P51 as a suspended print, just for fun. The model is made to print with 0,2mm layer hight. Other layer hight may not work. Printed on Prusa Core one, 0,2mm layer hight, PLA, without support and without raft. The printbed has to…
Simple wall mount for TRX-4m with hook for the transmitter. You will need 2 Screws with Ø3mm or Ø3,5mm to attach the wall mount at the wall. You can print this part without support when you print it at a angle of 45°. Category: R/C Vehicles
I tried to make the benchy more useful. So I scaled it up to 250% and made a dektop organizer out of it. In the front, you can put some small things in it like paper clips. In the cab is space for some pencils. And in the back, you can…
I made a Pallet in standard seize for RC trucks scale 1/14. The Frame is removable and stackable, so you can also put 2 or more frames on one pallet. Printing instructions: pallet: upside down, without support (like shown on picture 4)…
Trailer for the Traxxas TRX 4m. All parts can be printed with 0,2mm layer hight. I made mine with pla. I cut the threads with a tap to avoid damaging the parts during assembly. Additional parts needed: 1x screw M2,5 x 5 (needed for…
I made some small guardrails for my hpi nano ttr rc car. The guardrails are 30mm long and 15mm high and can be extended like desired. The pieces are joined together with light pressure. I printed mine with pla, 0,2mm layer hight without…
I scaled the benchy up to fit Lego minifigures in it and made some modifications so lego parts can be mounted on the benchy. To get the benchy floating, I made a catamaran out of it. Now it swims stable. All surfaces which have pins for…
I made spare tracks for my rc skid-steer, because i had to much grip on carpet or hard surface with the original tracks. Due to the high grip level of the original tracks, they often slip off the wheels when i turned the loader. With the…
Battery box for 2 or 4 standard batteries size AA / LR6 or AAA / LR03. The cases can be printed without support, orientation like the .stl-files are made. I printed mine with TPU A95, 0,2mm layer hight.
I wanted to make my trx4m Ford F150 more scale. To make it more scale, I decided to mount smaller tires and lower the suspension. In front, the standart damper mount of the trx4m Ford Bronco or Land Rover Defender can be used. In the…
I wanted to make a small indoor crawling course for my orlandoo hunter, wich is fast to print and does not need a lot of material. So i made 5 pieces, which can be printed in vasemode and can be coupled together. I printed all parts in…
I made a adapter for the GKS 18V-57-2 circular saw from Bosch Professional to use it with the FSN guide rail. There are two files for the main part of the adapter: one file (the one with the rectangular shape) is only for large printers,…
The bike of my son had no chain guard. So I made a simple chain guard for it. I designed it for the Naloo Hill Bill 20" MK2, perhaps it also fits to other bikes. You need the parts “chain guard_01” and “chain guard_03” 1x, the part “chain…
I made spare tracks for the LESU rc skid-steer, because it had to much grip on carpet or hard surface with the original tracks. Due to the high grip level of the original tracks, they often slip off the wheels when i turned the loader.…
The original steering from the model is very wobbly. So I made a on axle servo mount. You additionally need: 4x hex nuts M3 6x Screw M3 x 10 1x threaded rod M3 x 60 Printed with pla, 0,2mm layer hight and 50% infill. The hex nuts are…
Build your marbletrack by yourselve! Several parts to have fun with marbles. Build your track with this parts and Lego or similar bricks. The marbletrack is for marbles from 5-10mm. The curved parts are all in clockwise direction. If you…
Penholder / Desktoporganizer with slot for usb flash drive. Print without support.
I made a phonestand in credit card size (53 x 84 x 1,6mm). Fits for smartphones up to 12mm thick. I printed mine in TPU A95 , 0,2mm layer hight.
I designed a marbletrack which floats in a frame. The marbletrack is for 8mm steel balls, smaller ones should also work. Print the file in orientation like the 3D-model is made with 0.2mm layer hight without support. I printet mine with…
Generative designed smartphonestand. I printed mine with pla, 0.15mm layer hight. Works well without support.
After I relocated the servo on the axle, there was a good place to mount the esc. So I made a plate, which can be mounted at the place where the servo was. To fix the plate on the original servo holder, the original screws for the servo…
I lost the original cap, so I made some replacement caps with tpu. Fits for burley d'lite x and should also fit for other bike trailers from burley. I printed mine with 0,2mm layer hight, 15% infill, tpu with 95 shore hardness.
With the original batterytray from cen, the center of gravity is to high and the car rolls over in corners. I designed a batterytray, which can be mounted between the rear wheels in the chassis. The batterytray is for batteries with…
These are all currently available results.
