Counting matching models…
The original human nose model (STL) cannot be converted to a solid (in FreeCAD) as: The mesh contains two meshes: A big nose outside, and a smaller one inside (not visible) The smaller one has holes in the mesh (not tight) I split and…
Just insert the pin into the lower end of the spiral (see photo). You may use some glue if its too loose.
I did not found an elegant multiMAUS holder, matching my requirements, so I designed my own one using FreeCAD - et voilà! Slim, elegant design Invisible fixation Removable (allows to easily remove it while moving around the layout) Prints…
I was looking for a life buoy model which is nice from all sides … and draw one, et voilà! It prints in two halfs and needs to be mounted (glued together). Some short pieces of filament can be used as guide for a perfect fit of both halfs…
To protect my filaments from moisture, I put them in vacuum bags. In each bag I have a small humidity sensor, visible through the bag from outside. As the center hole of the filament spool is a good location for the sensor, I designed a…
Printed on an FDM printer with 3 perimeters and 20% infill. Printed in PETG, but other materials (PLA, ABS/ASA) should be fine too. Thanks to kl4appdrachen and Gimble for sharing their models!
The lever of my wife's old Thorens turntable player (TD 280) broke, so I designed and printed a replacement lever. A small hole allows to fix the lever using an M3 stud screw (optional). You may minimally scale the model to fine tune the…
I just draw it 1:1 from my real pylon I have (BIG), but you can easily scale it down to your needs in the slicer. If you want it very small, choose the massive version. The massive version also allows to embed a magnet by adding a…
Those wheel fixation plates for the bogies are known to break (three of them on my sons wagon broke in multiple parts). To fix it, I designed this replacements to be 3D printed. I printed them in PETG (Prusament), using a 0.4mm nozzle and…
My new Ideal-Tek LE-003 loupe was shipped with a case and a protective cover on one side only. The side with the scale (glass - the important part of the loupe) was left unprotected. Thus, I designed a fitting cover for it. Easy to print,…
As the Waterpik set did not contained a stand for the toothbrush heads, I designed one. And as the coding color choice is very limited (and cannot be changed), I added a magnetic space beside every emplacement to individually mark every…
Smart lighting bulbs requires power to be always ON. Thus, normal light switches (turning ON and OFF the main power) cannot be used anymore (they must stay ON all the time). Those prints just covers the switch to avoid pressing it and…
These are all currently available results.
