Counting matching models…
Disclaimer: If your printer isn't calibrated correctly, don't blame the design when the integral supports stick too tight. Use the version without integral supports and generate your own. You won't have as nice a surface finish on the…
The screen is held into the housing using 4 m2.5x8mm socket head cap screws. The housing attaches to the Voron 2020 rail using the default m3x8mm socket head cap screws. This screens screw pattern is too wide to accommodate the default…
I remixed the default Voron 2.4 skirts, adding a hex pattern inside the original hex. I also remixed the fan mount skirt, adding the same hex pattern and reworking it to be mounted backwards. The backwards mounting was necessary to allow…
This is a roller bearing style spool holder that replaces the oem spool holder, in the same location as stock. it will accommodate standard size spools up the 75mm wide with a 40mm or bigger hole diameter. The roller and the body each…
Edit 3/12/23 0800. I think I finally got to a version that prints without a bunch of weird settings and crazy supports. This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative.…
Model Update: 3/18/23@2030 hrs Pacific. After printing one of these, i realized that I made the counterbores for the screw holes too small in diameter. The counterbores are now 5mm diameter and should clear all M2.5 socket head and button…
If you need to park on dirt, you should retrieve one of these from under your seat and put your kick stand on this. It will keep your kickstand from sinking into the dirt and dumping your Harley. This is 20% bigger than my other models,…
This is a locking, sharp toothed lever cam operated bag clip. Named in honor of “Kaiser”, the first US Military working dog to die in combat in Vietnam. I printed mine with in PLA, with a raft, using 3 wall layers, 3 top layers, 3 bottom…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
This is a remix of the Z axis belt covers from TeamFDM. I love Akio's belt covers, as the access underneath lets me route my webcam cable under the covers, but they are too tall to fit under the Z axis linear bearings. My remix version…
It requires 4, m2.5x10 button head or socket head cap screws. The screws pass through the Pi and Mount, and thread directly into the plastic of the DIN clips.
These are low profile 2020 slot covers. They maximize the amount of space left inside the slot for wire routing. Print flat side down. I included a .stp file, so you can change the model to create custom lengths. I have included .stl…
User Smuk3d asked me if i could create a version of the TFT35 Voron 0.2 housing that moved the viewable area of the screen to center, and allowed for a more symmetrical bezel. It was alot of work and required a 90ish percent redesign of…
The other magnetic panel clips i've tried always lifted away from the rail at the corners. It looked to be because the screw was pulling the clip into the t-slot, tilting it so that the back lifted. It may have been because of the…
This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative. The CB1 has the drivers for this display built-in. The Screen sits a couple millimeters below the level of the housing…
60mm fan grills for my hex infill skirts. These fit the backwards fan support mod that is used in my hex mesh skirts. Fits 6020 fans using m3 heat set inserts. These do not have the small clearance recesses that are present on the default…
Disclaimer: I used BTT's CAD model and the Voron 0.2 CAD models for dimensions. I don't own a Voron 0.2 or a TFT35, but Printables member Eric Ebert, who assisted with many of the features of this design Printed and test fitted a couple…
I kept having issues with the amount of force needed to move the filament through the PTFE tube. The only way to get it to feed freely was to keep the tube's loop, behind the printer, overly large. This version of the exhaust housing lets…
Edited on 12/13/23. V4 has small handles on the front to allow you to open the jaws to slip onto a belt more easily. Also, added a right handed version, and expanded the surface contact area of the arms rubber band hook, to reduce the…
This is a set of Z axis pulley covers for the Voron 2.4. They are designed to match my hex infill fan grill and skirts. These are a drop-in replacement for the default covers. If you want to do a multicolor print, simply swap filament at…
A small, metric woodworking square. Print in whatever material you like, using any infill amount you like.
I created this to keep my DCST922 string trimmer up on the wall. It can be hung with the trimmer folded, facing either direction. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Keep this under the seat of your Indian. Next time you park on dirt, this could save you from dumping your bike. Print with plenty of infill, and switch filaments at the appropriate layer to get the nice logo infill.
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
I modified the inlet of my USB version of this, using the CAD model provided by Waveshare. This requires the Pi be mounted separately and connected with an extended length ribbon cable. You will need to auto generate supports, as the…
This replaces the rear, lower panel clip. It covers the exhaust fan wire, and any filament runout sensor wires, etc. You will need 2 m3 heat set inserts, two M3 T-slot nuts, 2 M3x8 socket head cap screws and two m3x6 button head cap…
BTT Mini12864 Display Case for Voron 2.4 and Trident 2020 T slot rail. I didn't like the default folding design, as over time it tends to get loose. This holds the display firmly, at a 20 degree angle. To use this case on your Voron, you…
This belt loop allows you to mount a Safariland ALS type holster to micro battle belt. This is for the belts that have 2" molle web sections. These belts typically have 2 half inch molle rows with a 1 inch space between them. Here is an…
A motorcycle kick stand pad for your Honda. When you need to park on dirt, put this down and put your kickstand on it. This will keep your kickstand from sinking into the dirt and dumping your new bike. Print this with plenty of infill,…
As long as your printer is capable of 1" bridging, you should be able to print this without supports.
This is sized to fit on the 300mm version version. you can use the front A and B skirts from the 250mm version. This should fit the Voron 2.4, 300mm by using the shorter front A and B skirts from the 250mm version. This took me about 6…
This is a 25%, or quarter scale model of a set of MG131 machine guns, with mount and feed chutes. I designed this for a friend, who was building a scale RC FW190. Most of the parts will print fine without supports, but the mount will…
This is a .308 version of my previous 6.5-.284 tray. It should print with no supports, but if your printer has trouble with bridging you can use supports for the handles.
This is a plug to fill the void in the SB Tactical AR15 PDW brace. Use supports/rafts at your own discretion. Works well with PLA or ABS. I havn't tested the print using TPU yet. Category: Replacement Parts
A motorcycle kick stand pad for your Ducati. When you need to park on dirt, put this down and put your kickstand on it. This will keep your kickstand from sinking into the dirt and dumping your new Ducati. Print this with plenty of…
Semi Closed Cable Drag Chain, 49x21mm internal, 59x27.5 external. The links have an integral support that will need to be snapped off and thrown away after printing. The standard link cap somewhat restricts the internal space when in the…
The problem I had is that the supports didn't allow for a surface finish that I liked. This Model has integral supports, that need to be popped off when the print is done. Before assembly. I optimized the design for printing in a specific…
It should print without supports in the default orientation. If you would like a contrasting infill color to the DeWalt text, change the filament at the appropriate layer. I added a V2.0 which more closely resembles my other DeWalt tool…
A motorcycle kick stand pad for your Yamahammer. When you need to park on dirt, put this down and put your kickstand on it. This will keep your kickstand from sinking into the dirt and dumping your new YZR-M1. Print this with plenty of…
A motorcycle kick stand pad for your Kawasaki. When you need to park on dirt, put this down and put your kickstand on it. This will keep your kickstand from sinking into the dirt and dumping your new ZX10R in the dirt. Print this with…
300 Blackout Reloading Block / Tray. Use supports for the end handles. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Prusament PLA Grey Notes: Any material does the…
A rugged storage case, 225mm x 125mm x 75mm internal volume. Print in materials of your choice, though the gasket should be a soft material, such as TPU. The corner bumpers can be printed in TPU or a rigid material, and secured in place…
This has all of the changes from my previous remix of this case, but with the addition of the thicker bottom and the hole pattern for Voron DIN clips. It has built-in supports, so you shouldn't need to add any. If you are using…
This is a variation of my 102x78x45mm box, but designed with offset fillets, so it can accept objects with corners. Print in whatever material you like. You will need 2 each, m3x15 and m3x20 socket head cap screws. Don't overtighten the…
I designed this to so that the BTT TFT43 V2.0 could be mounted to a Switchwire. This drops about 15mm lower than the bottom of the skirts, so you will need some clearance. The housing mounts to the skirts, in the same manner as the…
Custom designed for another Printables member. Internal dimension are 102x 78x 45 mm. Print in your choice of material. The gasket should be printed with a flexible material like TPU. Assembly will require 2ea m3x15mm and m3x20mm socket…
Voron Logitech C270 adjustable rear gantry mount. This requires a m3x8mm grub screw and two 4mm diamter springs. It installs onto the underside of the rearmost gantry 2020 rail using two M3 T slot nuts and two m3x8mm socket head cap screws.
Print it whatever material you prefer. Swap filament at the appropriate layer for contrasting color infill.
I designed this to so that the Waveshare 4.3 inch DSI capacitive touch screen could be mounted to a Voron Switchwire. This drops about 15mm lower than the bottom of the skirts, so you will need some clearance. The housing mounts to the…
Unmarked reloading tray, .308 (.473") Casehhead diameter. .49" actual. This is a mod of my .308, .243, 6.5 Creed tray. This version is unmarked, so you can modify for your own use. The MasterChief edition was made for, and at the request…
Print using supports, at least 20% infill in your material of choice. I used PLA, and it works great. The V2 version has a support that pushes the blade out away from the wall, so that the hedge trimmer has a more vertical resting…
A motorcycle kick stand pad for your Suzuki. When you need to park on dirt, put this down and put your kickstand on it. This will keep your kickstand from sinking into the dirt and dumping your new GSXR in the dirt. Print this with plenty…
This is a remix of my previous remix, of the Voron OEM exhaust housing. This one uses Roomba J8 filters, and has a small holder to allow a scissor cut peice of generic activated charcoal filter material, from Amazon, to be installed. This…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
.243 Winchester version of my other rifle caliber reloading trays.
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Print one of these and keep it under the seat. Next time you park on dirt, this can keep your bike from falling over. Print with at least 50% infill. For a contrasting color logo infill, swap filament at the appropriate layer.
This increases the size of the ALS release button. Most importantly, it extends it inward, toward the belt and provides a grippier texture. It improves the draw speed and reduces the chance of missing the button during the draw. This…
I modified my earlier version to more closely resemble my other DeWalt wall mounts. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with PLA @ 20% infill, and using Prusa Slicers…
I simple, 4.5 inch burger patty press. Both parts print in place at the same time, and are seperated when the print is finished. Place the outer ring on a sheet of wax paper, chamfers up. Put ground beef inside the ring, and press into…
A 4-¾ inch burger patty press. Place the ring on some wax paper, drop in some ground beef and press. Once the meat is pressed into shape, remove the ring and then the press. A shot of Pam on the press face makes removing it easier.
Print using the same material and settings as the default Voron parts. Uses the same screws. I included the .stp in case someone needs it changed.
This is a collet rack for ER20 collets. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: 3D Printing
This is a version of my earlier 225x125x75mm case, but this one has a carry handle. The corner bumpers and can be printed in rigid material like PLA, or in a flexible material like TPU. The gasket should be printed in TPU. Screws needed:…
Print this in whatever material you like. Switch filament at the appropriate layer height to get a colored infill.
This version uses two, vertically oriented screw holes. This will allow you to mount it to wall studs behind drywall. I also added the DeWalt 20v XR text to the sides, and changed the upper gusset reinforcements to allow for the upper…
This is a thick walled rugged case for whatever you need to store. The interior dimensions are 162 x 82 x 52mm. The corner bumpers can be printed with rigid material like PLA, or with a flexible material such as TPU and are attached with…
This is the 2nd version of my display housing for the Waveshare 4.3" HDMI usb-touch display. It fits the B version. This requires the Pi be mounted seperately. You'll need the 180 degree HDMI and USB adapters that come with the screen,…
This is a remix of the large size lid of Pjotrstrog's remix. I just added the Miniware logo and TS100/TS101 indicator
I got tired of squishy gooey soap bars. This was a quick, simple design to solve that issue. Shouldn't need supports.
This is a 14 inch long neopixel bar for Voron printers, or others using 2020 rails, with integral Logitech C270 webcam mount. It includes files for the diffusers, as well as a file for a 12 inch light bar and diffuser. I used clear petg…
Print one of these and keep it under the seat of your bike. Next time you have to park on dirt, you won't have to worry about the kickstand sinking into the dirt and dumping your bike. I created the logo @ 3 different depths. So, for the…
This is a chamber light mount for the Voron 2.4, 300mm. It uses standard 10mm wide, 3mm thick WS2812B type neopixel lights. Each section is 6-3/8" long (161.9mm), and is attached using two m3x8mm socket head cap screws and two m3 t slot…
This is a pegboard mounted rubber mallet holder. It is designed for the typical cheap 2.5" diameter head rubber mallet. It mounts to 1/4" pegboard using the plastic push rivets I uploaded to thingiverse. Print using PLA, with 25% or more…
This holder will allow you to use Edge Pro stones with your Wicked Edge. Epoxy the aluminum/plastic mount blank to the bottom of the adapter mount. I've included the .stp file so you can modify this model if needed. For some stones, I…
A 4.3125" x 1" thick version of my burger patty press design. Scale to your desired size. At normal scale, it has a .3mm gap between the outer ring and the press.
An easy print, in whatever material you like. There is a bit of bridging, but most printers will have no trouble with it.
A 4.5" wide x 1" thick, heart shaped burger patty press. Print in any material you want, with at least 20% infill. If it is too big/small, you can scale it to size. At full scale, there is a .3mm gap between the outer ring and the inner…
Print this in whatever material you like. There will be some bridging, so make sure your printer is capable of it.
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. This holds 4 shell holders, a lee case length…
This is a two piece design. Print the housing in PLA or ABS, and the cushion in soft TPU. I glued mine together using hardware store epoxy, but I suspect superglue or Gorilla Glue would work just fine. I used a piece of double sided tape…
This is an ER20 collet rack. Wall mount, or T-slot rail with 1.5" spacing, using 5/16 diameter screws. The upper screw holes are accessed from inside the upper left and right collet sockets. Use supports and a raft at your discretion. I…
This has a built-in support that should easily snap off after printing.
This is a corner mount, self draining shower shelf. Print using your choice of material. No supports required. It installs using double sided tape and silicon adhesive or caulk, folowing instructions such as these:…
Print in whatever material you like. It should be an easy print, though will require some short bridging. Most printers should easily handle this. Thanks.
I designed this in Alibre CAD to fit my 3034-lite T-slot rail toolholder rack. The holes are spaced for 5/16-18 screws. For best results, use a raft with plenty of supports. Updated on 9/17/22 to remove downward facing fillets and replace…
The stock rubber way wipes on my Birmingham YCL1340GH kinda suck. I designed these upgrades in 2 pieces each. the main part can be printed in PLA, ABS, PETG or anything you want, then the wiper part printed in flexible TPU and the parts…
The antenna base on my truck was getting pretty sun faded. This is a copy but shortened 1mm to allow for the TPU gasket. Print it in ASA and it should last a long time before fading.
Gooey soap sucks, and doesn't last very long. When you lay your soap on this, the water will drain away.
This reloading block requires some bridging in the side handle areas. The longest bridge is about an inch, so most printers should have little trouble with it. Set your cooling fan to turn on during bridging moves, and it should work…
Print this in whatever material you like. Switch filament at the appropriate layer for contrasting color infill. You will need 4 ea, m3x8mm socket head cap screws and m3x5 long, ish heat set inserts. If you are unsure about the heat set…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. This holds 2 lee primer seaters, 2 bullet puller…
This index is designed with gunsmiths in mind. It has holes for a taper tap and a plug tap in each of the sizes most commonly used by gunsmiths. With this, you can piece together your own gunsmith tap set, using high quality HSS taps, and…
A reloading organizer tray for the 7mm Remington Short Action Ultra Mag. Print in whatever material you choose. You will need a print bed at least 9.5" wide.
This should be printed with 100 percent infill, completely solid, or nearly so. It is 91mm in diameter and 12.7mm thick, with a .4" wide slot for the pinch weld on many cars.
I design these things for my own printer, then post them here just in case someone finds them useful. My filament runout sensor and rear exhaust fan wires run vertically down the rear panel, and are covered by a wire cover, listed…
This includes one to fit each of the toolposts dovetails. Once for indicating the OD, and one for the face of the part. Print with 3 shells, at least 30% infill and use supports. Category: 3D Printing
This is a pegboard caliper holder for an Igaging 4" digital caliper. Will not fit dial calipers. Attaches to 1/4" pegboard using the push rivets I have uploaded to thingiverse. Print using PLA, any infill desired, no supports should be…
A simple, 4.125" burger patty press. Prints in place, and seperates into two parts. The outer ring has chamfers, which should be oriented up. The outer ring is placed on a sheet of wax paper, the ground beef dropped inside the ring, and…
