Counting matching models…
I lenghtened the holder by 8mm in order to accommodate wider tubes. Original Description from @ ScrapyCoco Description PDF I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications…
My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…
Hi, I remade this model put with a print-in place hinge. I added my fusion 360 file which is parametric - meaning if the print in place is too tight, you can make it “lose” in the model. Look at the image referring to that (file: Filament…
I was very surprised at not finding this here. It's just a grip that slides under your wood/gypsum etc panel to help lift it. I made it to fit a 24x24cm bed, no support needed. Rare thing that happens: it's perfect (at least for me) on…
Xiaomi and Aqara: shame on your for designing the worst battery cover case ever - impossible to open. This model is a screwdriver for this… Opening this sensor is an horror: The little screwdriver will print in 10-15 minutes. I printed at…
Remixed of two -I used a stencil font to punch the type of filament into the tag. It will print at 0.2mm ok, but at 0.16mm you'll get better quality and surprisingly for me, it was about 1% faster ;) Print is solid - it's small and fast…
Welcome to the over-engineered Torx Screw Cap design. It prints without support and has a squeezable pin with a 0.4 mm slit for adjusting to screw imperfections. It includes an external lip for covering screws that aren't completely…
I needed a clip that could work with larger strings (5mm). Still works for the small ones. I also strengthened the pinching part and made the gap 0.2mm wider for the opening (to avoid them sticking together closed. Printed in PETG…
2 objects to be printed here - a funnel and an egg splitter that both fit in the hole of the Thermomix cover. I designed them for the TM6 but the hole size is the same so they should also work for TM5. Use FOOD SAFE filament- PETG for…
This model is based on the Bambu Lab Reusable Spool - Minimal Version, but with the center hole adjusted to fit the axle of the Winder Spool Holder of the Bambu Lab Filament Spool Switcher. It uses the same 0.2mm solid infill as the…
Printed Parts Assembly Attach the Base Screw : Begin by screwing in the plastic screw underneath the small base section. This extra support is here solely to provide more strength. Select the Right Peg Size : Choose the pin sizes that…
Hold your spray paint cans against a wall in little cut tubes. Very efficient space saving. Note: you need to print this in a fake* vase-mode: (this print won't work in standard vase more - spiralized contour - but it will it you simulate…
In my small workshop, I drop a ceiling-mounted dust hose when sanding. It doesn't twist well, so I had to fight it. This fixes that. I cut the hose and inserted my rotating pivot—one in the middle, another at the end for extra…
Different parts and shapes. #1 is universal holder for Batteries (18 votls) #2 is to held the charger in the mount so you can slide & charge battery - note that you can hide the wire in de gap made to host it betweent the holder and the…
The pleasure of reinventing the wheel.... Push your spool or bull or thread onto the pin and it will merrily roll along as you're using it. You can disassemble and it will snap in place for travel. You need a 608 bearing. There is is all…
This cap snugly fits the "male" end of a 100mm PVC pipe. I've included the Fusion 360 file in case you need to adjust the dimensions. The inner size is 100mm, and the plastic thickness is 2.8mm. It's printed at a 0.28mm layer height with…
If you want this gripper go here : this here is only the printed screw that is used it in. This is just an addon to the nice panel carrier grip. Finding the metal screws in Europe turned up to be quite expensive and ridiculously…
I made a mount for the Sonoff SNZB-03 sensor! Here are some details: Designed for : Sonoff SNZB-03 sensor. Screw hole : 3mm, for easy hanging. (example TX10 3mm Printing side : Sloped side should be on plate Strength : I used 4 walls for…
Save filament instead of Poop! I surprisingly use a lot of little shims in all sorts of situations to add stability to an uneven part or to space things or whatever. When printing in multicolor in Bamboulabs you can select a file and…
Features: Self-securing design Accommodates thin to thick table edges Small hole for attaching to your bag Hook faces inward for added security Keeps bag off potentially dirty floors Printing: No supports needed Print at 0.28mm layer…
Click here for Version 2 instead It has two parts. Main Body You can “push” the loader with its wire in the whole - push until flush with the other side. Then tuck the wire in the small gutter - chose any side you wish Once the holder is…
I had to make a five-tier wedding cake for a friend, and I'm just an amateur baker… I designed the plates and the legs. It turned out to be pretty good and sturdy. I created a very long list of models and leg sizes in millimeters for all…
This is a parametric file for a rack with the little bottles Guldfisk and Citronhaj ( link ) number per side number per rows angle of the bottles Various sizes generated below. You also get a funnel and a little joiner piece that you can…
I wanted to hang a google home mini outside. It's splash proof (but for very light amounht of water). It needs to be under a roof or something - I can't say it will stand under pouring rain. The picture was from a print using IdeaMaker as…
With this you will have a little holding box with drawers where you can put your sending disks. II made a little holder in the front where you can glide a little tag about the grit size. This week this way you don't need to print a new…
It fits this model - tested on EU . Prints without support. printed at 0.24mm, 2 walls (if smaller, simply make 3 walls, no infill). You place the mount wire side first, then place the KOPPLA in it, place the left or right mount on the…
I realized when downloading the original that I could not push the guide bushing that I had bought they were just a little bit too big. This could have been because of the tolerance of my printer, but I have a bamby labs X1 carbon. Also…
This is a pusher that keeps the veggies you want to ferment “under the liquid”. It fits this IKEA glass container (same all over the world). Extra - I decided to punch a little hole in the plastic cover and install a vent - so air can get…
Horror Story…. In the dead of night, an unrelenting itch crawls up your spine, but the back scratcher is nowhere to be found……. Let's solve that. It's a wall mount (prints in 10 minutes) that will hold this kind of saviors! I printed it…
Did you know regular filament spools fit in the large Ikea freezer bags (called ISTAD)? Even better, they fit in both the 4.5L and 6L bags! 30 bags for a couple of bucks. But getting the air out is annoying. How? Seal from one end with…
Each summer when I was a kid in the early '80s, my father would carve out of wood what he called a “Virevent” in French (windswirl). Hours of fun involved putting your hand out of the car window and letting it spin... facing the danger of…
Easy peasy: Insert an M4 (or smaller) wood screw into the hole in the printed insert. Screw the insert onto the piece where you want the knob to go. Finally, screw the knob over the insert for a secure and tidy finish. Check the side cut…
My grandma had one at the farm in the 1940's. My mum had on at home. So, I might as well make one for myself today lol... It just keeps both sides of a clothesline on pulleys together. Otherwise, the weight of the clothing will make the…
Screw this to the ceiling/under a plank Glide your bottle hanging by the cap Secure with elastic for stability… Printied in PLA, nothing special. Print hole pointing up. Edit: simplified the hook at the back to just a ridge to hold the…
These are all currently available results.
