Counting matching models…
Mounting bracket 90 degree angled heavy duty version Use four countersink screw to mount it Print it laying down, the overhang should be no problem. To get it more sturdy, use denser infill 20%, rectiliner. Maybe 3-4 vertical shell…
Carry a set of toothpicks safe in this small case. Can also be used for needles. Made for 5x toothpicks of size ~64.2 mm long and ~1.75 mm diameter. If you need other size please scale accordingly. If you like my work, consider buying me…
Bit holder for the parametric box by and9699 . Flippable, easy remove/insert bits (or whole row of them). Fits up to 40 bits. You need to get the box Fusion 360 file and configure it to internal dimensions 85x62x26 mm. See more details…
Simple cap for your female USB-C connector If you like my work, consider buying me a coffee: https://ko-fi.com/maildannesholkse
Tired of your throttle sticking? Use real bearing, either metal or polymer. With adjustable detent. Personally I fly helicopter so I skipped detent, but great to have the possibility. Re-upload of ADU-labs Thingiverse files . Such a great…
Nikon Nikkor Z Rear Lens Cap, original looking but slightly shallower (just because it was not necessary since my design has flat top). Tight fit so it sits secured. Original measurements so it protects whole width of flange. If you like…
Customisable foot support for your shoes. Load it up in Fusion360 and adjust for your feet. I have quite a big hollow foot so I have started to use this kind of things. And why buy expensive inserts when you can print your own. Measuring…
Column in ancient Doric order style. Use for support, display, leg or whatever. It is 100 mm tall. Scale it in slicer to your liking. I have mine as graphics card support in my computer, scaled to 77.5% to make it 77.5mm which fits…
If you have a 120mm fan in your enclosure, it would be nice to have some ventilation flaps there. Here is a version that have flaps that open when air blow. They hang a little angled so not much force is needed for them to open. Print…
Really nice variant made by hasseotto on Thingiverse. Print instructions: 25% infill Supports
Garmin quarter turn mount for your own designs. This is the “minimum” required to make some custom mounting option. Feel free to add this mount base in your project. Mount comes in two different variants. First the “original” looking one,…
If you can't get out biking and are stuck indoors. Maybe play some old vinyl 45's to get in mood. Freehub body is actually almost perfect replica in size, only change I made to dimensions was base which is slightly wider and thicker.
Variant of VolkerMueller's variant of the folding ruler marking gauge. This one fits our swedish common types, such as Hultafors brand, which are 17mm wide. (gap is 17.7x7 mm compared to VolkerMueller which is 16.6x8.4 mm). Also I added…
Print four parts like pic below.
Mounting bracket for chain stay. The original spare bracket is good but sensitive. This one is simple and replaces it. There is a small angle to make it aligned with the spokes. Update 2025-04-21: I noticed it works great for CYC Photon…
Holder for hanging a paper roll underneath a standard 18mm shelf. Made for toilet paper roll with ~37mm ID cylinder. But fits any width roll, kitchen roll or whatever. However, to add rigidity I have included a cylinder that connects the…
Originally thought as waste bin, on the left side, because often there is spill there. Good to have something there to catch it. And why not a whole wastebin so I made it to cover whole space. The right one could be used for IPA and tools…
Based on common designs. Could not find a one fitting my needs though, which was: Small and simple. Easy to fit Minimal protrusion on the outside to make roll fit snuggly in tight plastic bag. So… I made a version myself, have tried some…
Garmin compatible quarter turn belt clip mount. It consists of two models. The clip and the mount. Mount comes in two different variants. First the “original” looking one, it flexes too much with PETG though, so I designed another variant…
Adapter for your 45 rpm vinyls. If the hole is too big use this adapter. Print instructions: Prints good without support. However, for me, I had problem with it getting loose on the bed. Solved it with adding a slight brim. /edit: have…
Better bracket to mount your Moza R5 base. Original bracket is too big, made for fitting oversized tables 50mm thick, and also the base comes too close I think. This one makes it as low as possible while still maintaining the original…
Simple stand for your Loupedeck Live S or Razer Stream "stream deck” device. 35 degree angle. Features: It has some features that might not be obvious: Slot for cable, and also for letting heat out from back Hole for cable Separate base…
Depth stop for your smaller drills. Remix of mishkin2's great bigger model. This one is for drill size 2/2.5/3/4/5 mm. Clamps with screw/nut that makes it sit really tight. You need additional hardware: M4x12mm Hexagon Socket Screw M4x7x2…
Started to use kh4rj0's radius gauge for inner fillets ( https://www.printables.com/model/151423-compact-radius-gauge ) but thought I needed one for outer fillets as well. So I made this one with same dimensions. Measures radius from 2-15…
MOZA Racing DIY wooden table mount for R5 Base Why buy an expensive sim racing rig when you can build your own custom from wood that fits your purpose better. This mounting bracket is for mounting your R5 base to a wooden desk. Cut a slot…
If you use the Zumo XT/XT2 original attachment plate you might wanna use a better cover for the mount. Here is a model that snaps on just like the Zumo unit and covers everything. Print instructions: Might be a good idea to use paint on…
Mount your Zumo on the accessories bar (13 mm) with this bracket. Needs additional hardware to mount: Original mounting bracket 4x M4x25 screw 4x M4 nut 4x Washer, max 10mm If you like my work, consider buying me a coffee:…
If you don't like the stock round metal knob and want a more traditional styled “handle” for your H-shifter. Here it is! Personally I don't like the round one and also the metal makes it cold to hold, a plastic one feels better. Height is…
Model of the Garmin Zumo XT2 with attachment plate. Not perfect model* but outer dimensions and mount surface is accurate. Made for base for other designs, feel free to use it to your liking. I have designed holders and will come up with…
Mount for your Zumo GPS, fits 22.2 mm handlebar common on bicycles or motorcycles. Additional hardware needed: 4x M4x35 screw 4x M4 nut 4x Washers max 10 mm If you like my work, consider buying me a coffee:…
Tool for your Dremel style collet. Works like the original wrench but is much better imho. I use it for both my original Dremel and the Bosch GRO machine. Works great. If you like my work, consider buying me a coffee:…
For using a “common” 170x65x24 mm sanding pad. With this block you can sand 45 degree or 90 degree. Use four 4.5x30 mm wood screws and paper of choice. Note! If you don't have the base pad, there is a model for printing that also! Print…
Model of the very standard shark battery for your eBike design projects. This particular model is the “Jumbo Shark” version which has no space for controller. Mount is accurate. Battery is just a mock up, not too precise and detailed. Two…
Shelf bracket. Comes as 1x or 4x pieces. Print it standing with some sturdy filament. I have included PETG G-codes.
If you want to convert your Moza HGP shifter from H-pattern to sequential this is an easy way. Also easy to remove when you want to cruise around with normal H-shifter, just lift off. Requires my mounting bracket , to get the bracket…
Spare sleeve for the MOZA Racing HGP shifter. This is the part that grinds to the gates. Print instructions: It is probably a good idea to use a brim to make it sturdy Mount instructions: Unscrew the knob and the first shaft (that one can…
New gasket for your shower head. Print in TPU, use infill of choice to get correct stiffness. (note preview in model is wrong, misses the hole, it is there in model, otherwise very tight gasket :) )
Adapter for your 45 rpm vinyls. If the hole is too big use this adapter and remember the most important message. This is low version, I have a higher one also that covers the center: https://www.printables.com/model/426607 Edit: Updated…
In case you want to mount your throttle on a wooden board you need this bracket and some screws. 2x Screw M6x10 mm countersink (length not critical, maybe shorter) 4x Screw 4.5x10 mm (preferably countersink, length as you prefer)
Box for the common 27x27x27 mm metal whisky stones found on ebay. Have included stones actually, but only for display. Do not print the stones and use them in your beverage! Unless you don't have any food grade print setup. The box cover…
MOZA HBP Handbrake is really great. But if you do not need the original extended shaft and want it shorter you can use this handle to mount directly onto the base shaft. Extra material needed 3x M6x20 mm screws 3x M6 nuts (two from…
If you have your PSU inside cabinet you end up with a hole there. This is a plate to cover that. It also has a cable support. Made of three parts: Plate. Print in black preferably. Bracket. Print standing with support. Key. Print with…
MOZA CRP Pedals are great, except for brake pedal which has too linear feel to it. This elastomer upgrade changes that. Combine different hardness elastomers to fit your liking and get the perfect brake pedal. Original spring is 30mm…
If you want to mount your shifter from top instead of bottom you can use this mounting bracket that uses the original screws. Extra material needed 4x M4x20 (optional, but I think the original screws are a tad too short) 12x 12x20…
On some crank arm bolts for square taper there is this plastic piece stuck on the bolt. When it gets damaged, or lost. You can print a new one here. Tight fit like the original, you need to press it on. Then the bolt and this model is one…
On our most popular swedish toilet seat, this shitty part use to break after some time. Here is a replacement hinge plug. Not as good as original but it will make your seat last a while longer. Original plug is two parts. The hinge plug…
In case your ladder feet has worn out, replace them with this model. Print in TPU. Use some glue to make sure they stay in place. If you are worried they might move anyway, you could just use a marker pen to draw a line so you can see if…
Toilet Paper roll holder for HANger System for shelf (HANS). Fits a shelf for these common brackets that leaves a ~17mm space behind the shelf. Convenient to have the roll tucked away underneath your shelf. Fits a standard toilet paper…
Needed a replica of this kind of relay. Comes in both 4-pin and 5-pin configuration. (4-pin is “Form 1A” and 5-pin is “Form 1C”).
CYC Photon Step models for your own projects. I modeled parts for creating some attachments I needed. Thought it could be nice to share the base models if someone needs to create something. I have used my bike with 73mm bottom bracket as…
Adapter for your 45 rpm vinyls. If the hole is too big use this adapter and remember the most important message. This is high version that covers center. I have a lower one also that is more traditional size with open center:…
Put your phone on your chest with this parametric mount. Measure your phone and put correct parameters in. Use some velcro straps to strap it to the straps of a backpack. It works very well, can really recommend it. Put it quite high for…
Extra mount plate for the typical Shark battery mount for better fitting on 35mm diameter frame (like Salsa Fargo or such). There are three different models. Complete mount with controller box. Only mount. Only controller box. See pic…
Gasket for Bafang BBS motor. Three different Controller, the one with edge* Motor Crank body (optional) Print in TPU or similarPrint in TPU or similar * Have not had the oportunity to test the controller gasket yet. Hope it fits, please…
Holder in good angle for mounting inside enclosure corner, right on the middle where there is a pre-drilled hole. Left and right version available. Use one M3x4 screw which comes with kit. Flat cable can go either up or down (you can flip…
Made one of these for carrying heart shaped gingerbread cookies. It had walls though, this one is without walls. Good for storing flat things in a cool way. Use a bit of filament for the hinge. Can be difficult to print, but i turned 180…
Stand for your phone or tablet, dual with two slots. Husqvarna logo shaped. Have your phone in back and wallet in front, or similar. Two same sized slots. Might require supports on overhang, I didn't use on mine but then be prepared to…
Fits 35mm (inner diameter) accessories (slightly tapered, 34mm in beginning).
Convert your caliper to a radius measuring gauge easy with this add-on. It works like pythagoras theorem on the radius, constant factor between measured value and the actual radius. Just measure some radius with your caliper like you…
CYC Photon bash guard. CYC Motor is kind of exposed and the cooling fins seems fragile so I made this simple crash protection. Should provide good cooling with the many holes. It could collect dust though but easy to remove and clean.…
If your handbrake needs to come up some distance, use this spacer and longer screws to mount it. Original size is 10mm, you can just scale it to your liking. On my photo I have scaled it to 20mm so it lines up good with the shifter. Note!…
Simple stand for your navigator. Made for just storing or perhaps display (not possible to connect USB cable). If you like my work, consider buying me a coffee: https://ko-fi.com/maildannesholkse Check out other Garmin prints in the…
Mount your head phone connector in the car with this mount. Fits regular air vents. Perfect for like a bluetooth reciever, fm receiever or such. Maybe as an extension to have your 3.5mm outlet better positioned. Print in TPU with support…
Table stand with adjustable angle. Can be used on table or if you put some rubber on it you can use it on car dashboard as well, and then you can use an angled cable. See pic below. Three different parts to print: Additional hardware…
Simple box for 10 pieces of below filament sample: https://www.printables.com/model/49734-customizable-filament-sample Attached are some different formats. The gcodes are for printing the cover upside down so you get a nice finish on top.…
Protective jaws which I designed for the Heuer Compact with 120 mm jaw width. Should fit any other Heuer with 120 mm jaw also I assume. There are horisontal and vertical slots. It comes in two versions, one with smaller slots and one with…
Made for Bergamont Grandurance bicycle with Pelago Commuter Rear Rack Fits 35mm seat tube (mine is 35.15 mm). Adds mounting point for rear rack bars to your seat tube. Use M6 screw with nut and washers. Also check out my other designs for…
Attach your pedals to wood with these grommets and regular wooden screws. Print x18 of these and use some regular 5 mm screws, maybe 20 mm long or something. Placement I have used original hole placing, for all three pedals and the front…
In case you want to use for example a Gardena coupling in your shower. Converts ISO pipe thread R20 to R15. You need a gasket also, included. Possibly some piping tape also because it can be difficult to get it water tight. You can…
Cap for your 8 mm quick connector, both female and male versions. There are both with or without eyelet for attaching strap. Print in TPU
Right in the middle of astro photo season I got my printer so I could do this astro focusing aid mask for my super tele lens. Should make focusing on the sky elements a breeze. Made it fit the built-in small lens hood. Inner diameter of…
Portable case for your E3D Revo Six nozzles. Place for four nozzles.
Your MOZA Racing HGP Shifter might get loose and wobbly. That is because MOZA have put bad plungers in there, the springs brake! But there is an easy fix for that. Either replace plunger (or the springs in there), or print new plungers…
Stand for your phone or tablet. Husqvarna logo shaped. Might require support on overhang. If you can't stand this simple model I have a dual model also: https://www.printables.com/model/1103164-dual-phone-stand-husqvarna-logo
Adapter for attaching a 32mm dia pipe to a 40mm rubber nipple. It also extends tube by 50mm so you can use just a regular bend as the last piece. Fits tight but you could use a tad of glue for the tube just to be safe. Here are section…
If you have an in-line power cord outlet hanging around. This is to hook it up somewhere. Print it, add two cable ties and maybe some self-adhesive tape. I have two of them, one on a large table leg and one on a small chair leg.
Need to mount your shifter on wood instead of some metal rig? Then you might want to use regular wooden screws and then you need some grommets (washers) to make it fit good in the big slotted holes. Print four of these and attach with…
Mini angle gauge to find your draft angle or something like that. From 80-99 degree, with handy box for storage. Have included two 3MF with 10 in each. One zip with all of them in Step format. If you like my work, consider buying me a…
Adapter to fit your vacuum cleaner to your sander. It is slightly conical but dimensions in the middle are about 22.5 inner and 25.5 outer, diameter in mm. Print in TPU. If you like my work, consider buying me a coffee:…
Simple bracket for 6mm locking sprint Use as either the supportive part or the locking part. The sprint I have is ~5.85 mm and slides with just a little friction. Besides from the sprint it requires two flat head screws. If you need that…
Simple and cool scraper for you gluing or similar. Resembles the Pac-Man ghost. 4-teeth variant is original, but quite unusable for this. Pick whatever tooth size you feel is most apropriate for your usage. 4T, 12T, 24T or 36T for really…
Grille for air conditioner, has an opening of 246x130 mm. Should be quite universal but made for mine which is a chinese rebranded A/C “Sandstrøm”. There are two versions, either 70 or 50 degree flaps. I have printed 50 degree version. To…
Link your split keyboard and trackball together with this model. Angle of keyboard halves: 15 degree. Tent angle: 6 degree (slightly more than with original studs). Trackball position as low as possible, on desk. Keeb halves sits quite…
Made for Bergamont Grandurance bicycle with Pelago Commuter Front Rack (I also have the optional lowrider pannier support) Stock bracket don't fit well. This makes it fit good as low and tight as possible. Since it flexes a little the…
Holder with clamp for your typical old style shower head. Use a hex head screw M6x35 mm. Print in something sturdy and use paint on support where needed, included in .3MF's. If you like my work, consider buying me a coffee:…
For better precision and more style in your brewing. Use this funnel holder while preparing your coffe. Designed as a roman column. Use stand-alone or together with the funnel cone. If you like my work, consider buying me a coffee:…
When doing skirting boards there can be a challenge to get the 45 degree cuts correct. Never more. Here is jigs for outer and inner corners to get it perfect every time. If you like my work, consider buying me a coffee:…
Cover for your motorcycle battery when putting it on the shelf. Print in TPU or PETG. There is also a version with Honda logo: https://www.printables.com/model/1629162-honda-motorycle-battery-cover If you like my work, consider buying me…
Carry your heart shaped gingerbread cookies with style. Fits five pieces of these hearts which are common in Sweden, see photo (Gille små hjärtan pepparkakor). If you would prefer a version without walls inside I have a more general box…
Prepare your moka easier with a cone. Use stand-alone or in conjunction with the funnel holder --~~¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤¤~~-- I made a larger funnel as well, it is better to use but takes more space (and does not fit the stand really), but…
Made for Bergamont Grandurance bicycle with Pelago Commuter Front Rack optional accessorie Lowrider pannier support Stabilizes your front rack. Uses standard M5 bottle cage screw and zip tie. Also check out my other designs for this rack,…
Made for Bergamont Grandurance bicycle with Pelago Commuter Front Rack (I also have the optional lowrider pannier support) These dropouts go upwards and attaches on the lowest “bottle cage” hole on fork instead of the mudguard hole which…
Hang your nicest drum stick underneat your shelf. Fits IKEA shelf and likes that are 18mm thick. Print two of them and add some self-adhesive tape.
If you want to use your Garmin Edge bicycle computer with the original quarter turn mount on a thin bar it wont sit tight. Use this adapter to increase the diameter on the bar to regular bicycle size (31.8 mm). Made to fit ~12.9 mm…
Top cover for your Fractal Design Pop series computer case. The outlets on top are prone to collecting dust so I made a simple cover for them. /Edit: Does not fit the RGB cases since they have other layout with an additional button Print…
Buckle for your swim glasses, they tend to break. Print a new one. Filament choice, I used PETG. Not sure if that is best. Time will tell :) personally I used ironing on top. Should provide better surface (closed micro holes/layer lines).…
Toba remote is very nice. But they include no way of mounting it somewhere. Problem is no more. Here is a holder that you can mount anywhere you want. Just use some double adhesive tape and put it on your wall or shelf or whatever. The…
If you have kind of a board or something and want to align it when sliding it on something. This support bracket is made to help guiding. Requires two countersink screws. If you need that sprint bracket also, it is here:…
