Counting matching models…
A simple keychain of a running shoe. Modeled using a picture of the Nike Air Zoom Pegasus Here is a similar model of a Saucony and Adidas running shoe that I made. Slicer instructions: The STL has 5 different parts (bodies). You can…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Print in the original orientation of the STL file. Enjoy printing! Prints without supports Dimensions: 32*32*32mm when collapsed. Might need a little bit of breaking in. Based on this LEGO Minecraft magma cube. I saw it and immediately…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
A simple keychain of a running shoe. Modeled using a picture of the Adidas Duramo SL Here is a similar model of a Saucony running shoe that I made. Slicer instructions: The STL has 5 different parts (bodies). You can customize the slicing…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
All current Formula 1 drivers as of now. Fun as a gift or just for your own use :) Comment if you want other iconic drivers! Currently added: Max Verstappen Sergio Perez Fernando Alonso Lewis Hamilton Charles Leclerc George Russel Carlos…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Inspired by Teaching Tech's bendable prints, I created this mobius strip. The dimensions are not from his design, so it's actually completely made by me. There is a clip at each end, so after printing you can bend and click the strip…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
From the well received GREATEST Towel Hooks now an improved Version 2! With improved attachment area, greater holding strength and fillet corners. Update 13/09/2025: Added versions with screw mounting holes These towel hooks are an…
Edit July 17 2023: Added symbols $ % # € ! ? & Edit August 6 2023: Added special characters like Ü Ö É Ç Å At 100%, the letters are roughly 13mm tall (or about ½ inch). I tried scaling down to 65% (8mm letters) and that still worked. Try…
Print upright (like the .STL) Add a brim! Enjoy printing :)
Print one deck and two railings and push the deck in place. You should not need glue. The ribs connecting the slabs of the deck should be on the bottom. Enjoy!
These towel hooks are an amazing addition to your kitchen or workshop. You can hang your towels using a single hand and easily take them off. Printing: Print them in the orientation of the .STL without supports! Make sure you have good…
A model of the golden gate bridge in San Francisco How to make: Print all STL files twice in the orientation provided, or print the objects in the .3mf file twice to get all parts. Connect the two roads with two pieces of filament (about…
Cute customisable astronauts: Cosmic Cuties No supports needed for the sitting cuties, but supports are required for the standing astronauts. Choosing your Cosmic Cutie: They are made for 16mm marbles (see below for different sizes). The…
A simple remix of this awesome model I found made by Nolan Cramer I added a heart instead of a coffee mug
A few caps you can put on the bolts of your bike to customize the look of your mountain bike or other bicycle. I printed mine using 0.2mm layer height, they take about a minute each to print. Print them as an upside-down mushroom (largest…
Print this display piece to show your excitement for the Olympics in Paris! Requires 2x M3 bolt (5 or 6mm will work, for longer bolts you can add spacers or cut them down) Glue is optional Available Models: Seperate colored rings…
How to print: Quick summary: Material: PLA (I recommend not using silk filament) Print using vase mode or spiralize 0.5mm line width 0.3mm layer height 0 bottom layers 0s minimum layer time Print all parts seperately Choose the right…
Printing instructions: Layer height: up to 0.24mm for fast prints I recommend PETG for longer lasting hinges, but I used PLA and it works fine. The stl files are upside down, print them laying flat so you don't need supports. If you want…
A nice set of 10x10cm coasters. Apply a color change at layer 10 (0.2mm resolution). The last two layers will be the new color. There is a tiny gap between the base of the coaster and the design. This will allow some slicers to add a…
You can change ‘XY size compensation’ (prusaslicer) or ‘Horizontal expansion’ (cura) to a positive value (eg. 0.2 or more) to increase the strength of the saddle and fork.
A simple keychain of a running shoe. Modeled using a picture of the Saucony Ride 15. Try increasing XY Size Compensation (Prusa) or Horizontal Expansion (Cura) to create thicker lines if the logo is too thin. Here is a similar model of an…
Printable (2D) smileys. You can choose the size by scaling them up (recommended at least 200%) Add 1 color change (from yellow to black) at the right layer height. You can also download the .3mf file to get all STL's on your build plate…
Print with a color change for the logo. Print both parts laying flat. Required hardware: 2 M3x6mm bolts Also check out the same stands for Arcade Fire and Coldplay on my profile
I recommend a slow first layer for good adhesion.
I use it on my Adventure Racing backpack Measure the width of your strap, print it and finagle it on the strap. It is hard to put on a strap, but that means it will stay on the strap really well.
I created a holster for my sister's halloween costume. The revolver is made by the designer DeSteiner You can print it on a 256x256mm build plate, fold it and stitch it together with thread. Any mostly standard 40mm belts will fit.
The title basically. Prints without supports, I recommend a higher resolution (0.12mm) for better threads. 3 variants: Short valve cap Long valve cap Long valve cap with threads deeper in the cap
Uses 4x M3 x 6mm bolts Print in the orientation of the files
I have used this brake on my fixed gear commuter bike since september 2021 and it has worked great. I do not recommend this for serious cycling (mountain bike or road cycling) but for commuting it is perfectly fine. Printing instructions:…
Print with a color change for the logo. Print both parts laying flat. Required hardware: 2 M3x6mm bolts Also check out the same stands for Billie Eilish and Arcade Fire on my profile
Print this keychain to show your excitement for the Olympics in Paris! I included a normal (thin) wall version and a stronger thicker walled version. Also check out my full color display piece: Olympic Rings PARIS 2024
Print this piece to show your excitement for the Olympics in Paris! Also check out my full color display piece: Olympic Rings PARIS 2024
Drawing Templates for NACA 2412 Airfoil CLARK Y Airfoil
Instructions Print all parts (except the ‘Trophy base and chalice.STL’) in it's original orientation and a mirrored copy. These files have (mirror) in the name. You should have 1 base, 2 mirrored left handles, 2 mirrored right handles, 2…
Works for the most common 20mm straps. It is hard to put them on, but that means they will not come off either!
You should add some supports only at the bottom of the part (none inside, you won't be able to get it out). Happy (Easter) Printing!
A really fun and easy to print desk toy! Print in PLA or any other stiff material. Print in the orientation of the STL files, no supports needed. Takes less than 2 hours to print for the spinner + stand. I included a design for the most…
A Koch snowflake is a geometric shape that is created by starting with a triangle and then adding smaller triangles to the sides in a repeating pattern. The resulting shape is a complex, self-similar curve that has an infinite perimeter…
A really fun and easy to print desk toy! Print in PLA or any other stiff material. Print in the orientation of the STL files, no supports needed. Takes less than 2 hours to print for the spinner + stand. This is the bearingless version of…
A multicolor version of a Minecraft Magma Cube model I have created a long time ago This fidget toy can be easily printed sideways and can be used immediately after taking it off the print bed!! There are two versions, one is the full…
Display this piece to confuse and Rick Roll your visitors!
A small roller for your arms. I use it after a (javelin) throwing session. Printing instructions: I printed mine with 0% infill, 0 top and 0 bottom layers and 6 walls (at 0.6mm line width). I think you can do 4 or 5 walls as well, it will…
A bread knife keychain for your bread lovers!
A handy canister with some holes so it can function as a shaker! Fill it with magnesium/chalk powder for grippy hands anywhere you need it. Could be used for salt or pepper as well to spice things up 😉 Print instructions: Can be printer…
Become the king of the trails or road! Add a cool flare to your road bike, mountain bike or road bike with this custom crown! It will just slide over any 22.2mm handlebars with ease!
Saw this sign when I was on a trip in Belgium and decided to design and print one for myself. I used the original road sign SVG from Belgium. It features a very nice traditional bicycle
Included versions that do not require supports, because they have a solid bottom.
Print with a color change for the logo. Print both parts laying flat. Required hardware: 2 M3x6mm bolts Also check out the same stands for Billie Eilish and Coldplay on my profile
Inspired by Daniel Labbadia 's Jacked Javelin logo
These are all currently available results.
![Golden Gate Bridge [String Art]](https://media.printables.com/media/prints/573999/images/4590471_3f637853-6699-498b-9021-24fb5d417009/1693931560144.jpg)
