Counting matching models…
Don't like the plastic wrapping of your wet wipes package? Stressed by this thin plastic flap coming loose all over again? Here you go - a handy box to store your wet wipes. Easy accessible with a sealing flap and easy refillable due to…
The original Switchwire/Enderwire top PTFE/Bowden slot offers a lot of movement, but not a great chamber sealing. Temperature easily escape. I tried to find a way to seal up the chamber..but also ensure enough X axis movement up to a…
Are your friends and family more engaged with their smartphones… than with communication? Can't put your smartphone down? Lock it in the smartphone jail! Easy printable, no additional hardware! The door has built in print- in - place…
During my attempts to increase the chamber temperature , i noticed that there were small gaps all over the tophat, allowing warm air to escape. To reduce this I have designed a small block onto which 8mm wide self-adhesive foam strips can…
The Enderwire non-pro 's Y axis is quite wobbly due to the single MGN12h rail in the middle of the whole assembly. I searched for a solution to use two MGN12h rails while still using most of the original conversion files, so i came up…
Often cardboard spools are quite rough and tend to jump out of position with a onesided spool holder, therefore i designed an internal spool roller with 4 individual rollers. Moreover you are able to load the filament from the front,…
After adding MGN12H linear rails, the limit switch on the X axis has to be 8mm higher. That means, that the stock stepper pulley cover has to me removed to make more room for a custom limit switch adapter. Pulley Cover : I created two…
Converted my Ender3 to the dual z axis with 2 stepper motor in parallel, problem - there is a chance that the 2 motos get out of sync. To prevent this I bought a 640 closed timing belt but needed an adjustable belt tensioner. Needed…
I was not happy with the mounting angle of this LED star projector. You can only choose between three different angles when placing the lamp on the floor or a shelf. So i created this neat little stand that perfectly fits to the fins on…
I was not happy with the way the stock Enderwire's (nonPRO) enclosure panels are mounted. VHB tape is not a good way to make the whole assembly rigid. Therefore I created this mod to fully implement a frame out of 2020 extrusions while…
Just a little camera housing to fit a HBV1313 PCB with OV2659 chip onto the right side of any Voron 0.1 / 0.2 extrusion without preloaded nuts. Due to easy printing the 2x clips have to be glued onto the slots at the upper side of the…
When mounting neopixel/led bars on the upper extrusion frame, it is hard to hide the corresponding wires. Therefore I created a little cover that fits onto the A/B stepper tensioner to hide the wires (partially) and also the pulley…
Minimal display case/mount for a 5 inch HDMI display that fits to the original V0 Display mount…no skirt modification needed. You can check the dimensions on the official Elecrow website :…
Love the Vorondesign? Need a little desk trashbin/basket to get rid of printing scrap? Or only love printing things ultrafast in vasemode? Then check out this Voron design cube - easily printable in vasemode! You only need to activate…
Wife wanted a decorative but minimal vase for her pampas gras, so i tried to model one. Better print the small ring and the sides with a brim due to the small surface area.
Adapterplate to fix the DS18B20 one-wire thermistor inside the chamber of a Voron V0. The adapter will be screwed on top of the z-rail extrusions, the wire will be routed through the hole on the right side of umbilical PCB. The thermistor…
Illuminated Voron sign to pimp up your chamber - or what ever you want. It will be glued with VHB tape to any place you want. BOM : Printed bottom housing (Opaque material - preferred ABS) Printed top housing (Opaque material - preferred…
Wanted to have some more light directly on the printing area, so I designed a little ring to fit 8mm LED (self adhesive) stripes directy under the famous Satsana cooling duct on my Ender 3. Diameter of ring is 65mm, should fit to several…
Case with arm that fits to the left front edge of any 3D printer with 4040 aluminium profile. Housing is designed to fit an 39x39mm Raspberry Pi Camera with hole distance of 34x34mm . The housing is rotateable on 2 axis to fit the perfect…
After conversion to the Direct Drive and BL touch a lot of additional loose cables were flying around between the extruder and the former extrusion adapterplate. So here are 2 small brackets to organize the cables properly. One for the…
This is a backframe for the old Ender 3… It is just for a stylish appearance, this brace does not really add stiffness to the mechanical frame because its printed out of plastic. Frame consists of 10 parts which are easily printable. The…
Just a simple display stand to let your SMILEY shine on a table or shelf. You will need one simple M3x10mm self tapping screw to fix both parts together.
Just a little cover for the front y axis idler pulley. Print it with supports ( for the MGN12 rail slot). Additional M3 T-nut with screw is needed to fix it on the extrusion. To be used with the original mgn12h linear rail mod from the…
The stock creality 42-34 stepper are shorter compared to the BOM stepper. This results in a small gap between stepper motor and enclosure - not only ugly but also bad for chamber temperature. Modified the original wide clip from…
The original dual z upgrade kit from Creality comes with an "L-shape" metalbracket to mount the PSU on the lower aluminium frame. Unfortunately the orientation of this bracket is not ideal, a lot of space is wasted. Moreover I was not…
This case is designed to fit an Raspberry 4B with a 5" Touchcreen to the left front edge of the original Ender 3 - not V2 or other variants ! It will be screwed into the two original holes on top of the electronic case. Moreover there is…
These are all currently available results.
