Counting matching models…
This is a simple part sized to go onto a Shimano-type freehub body underneath a 9sp cassette. The intended thickness is 1.85mm and the model includes a single tooth to engage the splines. I can create other versions of this if desired -…
Print flat, not standing up to allow for better layer direction - V3. I printed it using ASA, 40% fill, 4-5 perimeters for strength.
We store the vacuum itself in the wall charger, but the long wand with floor attachment is usually detached and needs a home. This bracket is designed to hold that. NOT intended to hold the weight of the vacuum. First version/release…
Fantastic to have a cooler with a hinge with 100% chance of failure due to general use. Well, you can print a replacement using this model using amazing TPU filament. I chose to design it pretty thick to provide support to the lid. I'm…
I wanted one of these for use in a workshop environment - we have wood that we can attach it to, so I added two screw holes (1mm smaller diameter than shown in pics). Now with V4 there are two sizes provided, STEP and Fusion 360 files…
---Alpha2 version-- If you try it, please send me feedback. If you make a public comment, perhaps mark it as “alpha2” so people seeing finished versions know that the comment is applies to an early version. Uploaded 3MF this time, no STL,…
Simple windowing of the original magwell - from files at the time of posting this. Added fillets on the window, adding 2 darts remaining in mag index - I never printed this version but assume it will print fine. OOps, noticed someone…
House had an empty high-mounted wall box to which we could run ethernet, so this adapter allows you to mount the Netgear box right “on to” the box. The adapter plate has plenty of holes so that you can run wires from inside the box to…
The K3 door expects a paired set of countersunk magnets but it is actually non-trivial to source these in opposite polarities. I made my door with countersunk magnets so needed magnets on the frame side to attract them. Odds are high that…
Two separate bodies so you can just run two jobs in different colors, rather that trying to setup a multicolor print. I needed it because I don't have white and yellow in the same material sitting around. Pulled into Fusion 360 Mesh mode,…
Mounts a 4010 blower fan to a 1515 extrusion. Mainly targeted at under the Micron printer bed. But could be used in other orientations as-needed. I never printed one of these, seems that it needs supports. BOM (simply modified to have one…
I didn't have the original Delta PSU components to use and I try not to open power supplies, so a replacemnt 5USD AdamTech inlet is a economical choice. Note that the original model is marked Mk3, but I'm pretty sure it is derived from…
“Carpet” version is meant to go under an appliance/furniture so it will stay. I'll make a version with no foot and with countersunk holes to attach it to a flat surface. Designed to fit the door blocker which measures 145mm wide and 15mm…
BETA 2 Restored the logo, I put it at an angle. Minor reinforcements, still needs a tiny bit of cleanup for some artifacts that were leftover. Reduced the size of the area for the bearing stack by another 0.7mm. Looking good - need to…
Modified model parts using Voron-standard heatsets (M3 5mm diameter). Other heatsets will not work because all these parts have limited depth so the shallow heatset is required. No real advantage to this, just good for those who don't…
Tried to preserve existing outer geometry. Final (probably) This will be the one I have installed on my V-Minion. I'm not putting them in a folder, they will be at the top level of files. All beta2 things wanted below completed (I think)…
Remix of the model which provides a minimal box to hold the headunit on the desktop, with no power supply integrated. This mod adds a XT60 connector on the side. It also provides a Fusion360 file so you can move the power, modify it for…
I thought the following design was decent because you can use bolts to attach the cover(s) - I am only using the front cover but you can mirror this model to use front and rear.…
Hakko 633 Sidecar Someone mentioned that they like the sponge and I do too. So thought that why not have both?? This model holds two of the Hakko 599B pots. It uses cheap 10x2mmish “fridge magnets” to securely attach to the bottom of the…
Replacement for the center part of a Costco Chefman hot water kettle lid. Disclaimer/WARNING You can potentially hurt yourself with this item if you pour too fast and boiling water somehow dislodges this item. Use at your own risk, check…
This may not be for many, but I never use the encoder (the knob), so this remix removes the hole and puts a logo in its place. Cutout for the reset button is still there. WARNING - you need to permanently defile your screen PCB by…
Hakko 533 Pinecil accessory holder. Meant to magnetically attach to my other accessory which adds a second cleaning pot. This will work for TS100 tips since they are the same, you just won't be able to use the iron holder hole. Honestly…
K3 style door setup for 1515 extrusion using F695 bearings. Might feel a bit oversized for a V0 size machine.
Originally designed to mount to a Zaribo electronics box, altered to use heatsets. You will need M2.5 heatsets though. And honestly this will mount to anything flat so very flexbile. You can ping me if you want me to make different holes…
Add a keystone receptacle at this cover location - mainly useful for those who have G2Z and nothing behind this cover. Would be interesting to hear if someone with stock motors can use this at all. Designed from revision 0 of the Micron…
Skirt is nice and symmetric with just the hole for the inlet. Unlike other versions that accept the filtered inlet, no hole for the ZF-type toggle switch - I did this because I moved this switch to the side of my printer. To hold the…
The 1.0 design uses a T-shaped plate to connect the Y-axis rail to the printer, but with the 1.1 version you use some of that space for the MCU electronics box. Out of the CAD, I extracted the profile needed to make this corner style…
Seems that I'm not well tuned to print long overhangs on my ABS printer, didn't want to deal with it so eliminated it in the design. Base is now boxy with just a 0.4mm chamfer. Use mirroring in your slicer to flip it if you want it to…
The 1.0 Z-top for this dual-rail mod does not fit on the 1.1 version of the printer due to the position of the leadscrew. For this model I took the top cap in the Ratrig V-Minion 1.1 CAD and cut off the side that would hit the side rail.…
By the way, you don't want to impact, it makes the experience pretty unpleasant. Also be careful at the end of the transfer, else you may experience life as a weed.
The Vita cart is most notably thinner than a Switch one, so reduced that space by 1mm. Different shape at the top to grab too, so made the slot 1mm less deep to maintain your ability to grab it easily. No actual picture included, but I…
Was looking for a good way to store my nozzles and classify them. Realized that I could have a mushroom for each nozzle class (HF vs Obxidian vs SF vs etc). I didn't add any features to further label each nozzle. Printing I printed at a…
For mounting a LRS 350 style PSU to 3030 extrusion frame - mine is a i3 style frame. You may need to resize the inlet box - many seemed to use 40mm hole spacing but have various body widths. A very deep inlet may not leave enough space…
These are all currently available results.
