Counting matching models…
Print, put inside your SUNLU 1kg spool, fill with desicant. Ideal for AMS or other filament boxes to keep filament dry. Prints without support, I used 0.2mm layer height and PLA. Holes are up to 1.5mm so use dessicant that is 2mm or…
You ever had a problem that seatbelt is scratching your neck, or in case you have them going over your sensitive parts on the chest? This little thing will allow you to add a forth point of contact on your waist so that belt going over…
A little lock inspired by the panduit rj45 lock, this one is not meant to prevent anyone from unplugging cables but actually just locks cables properly so they don't pop out on themselves Print Settings Printer: self made Rafts: Doesn't…
very loud aux/part cooling fan on sv07plus covers only center of the bed... I made a wider one that accepts 2x 120mm fan so you can use 24V 120mm fan from sunon or noctua and have much higher cooling power with way less sound than…
I'm printing so many of these cubes testing new filaments, print beds, extruders, nozzles... so blank ones and ones with XYZ are nice for testing but fairly useless for anything else so I made a small change and added 1-6 markings on a…
Aeron Hip Pivot Bolt is the only real issue I have with Herman Miller Aeron chair. In past 14 years about 8 of them broke on me. Actually the "bolt" itself is ok but the casing for the bolt that is made out of some unknown material (looks…
Print two pieces (mix and match you can print 2 of the same or one each), attach the pieces with M6 bolt+nut and you have your 19" rack bracket for 6 of your POE+ adapters I print it with PETG and 0.8mm nozzle with 0.5mm layer height for…
Modified @SANAIR_255075 y-splitter remix for pushfit connectors so that it can be attached to printer using 8x5 magnet (8mm dia 5mm thickness) instead of using M3 screw. onshape source:…
The adaptation of previous script. The ends can now be made stronger and you can rotate the object so when printed on a side you get much more strength to hold the tools. Instructions print attach use enjoy :) (after printing this type of…
Print, put inside your SUNLU 1kg spool, fill with desicant. Ideal for AMS or other filament boxes to keep filament dry. Prints without support, I used 0.2mm layer height and PLA. Holes are up to 1.5mm so use dessicant that is 2mm or…
This is a simple sleeve case for bluepill stm32F103 mini dev kit. There is available source on-shape url so you can edit if you like. The bluepill, at least in my experience, comes in version with 1.2mm and 1.6mm pcb so 2 different STL's…
Holder for NEMA23 type stepper motor Instructions Generate G-Code using Skeinforge and print using RapMan Category: Other
Properly holds regular 80g paper, holds inkjet 120g and 200g even better. Big surface on the back for doublesided tape or you can poke it with a pin and stick to the board like that... very thin 1.5mm base so no need to drill pin will go…
Case for ADUM4160 / ADUM3160 USB isolator with embeded 4 port HUB I got this isolator from aliexpres: "USB isolator, 2500V USB HUB isolator, USB isolation board, ADUM4160 ADUM3160 Support USB control transmission"…
Super simple design I came up while making thing:4080108 You put your belt trough loop on your carriage and just clip it on the other side, easy to put on, easy to remove, grabs belt crazy good ... after 2 hours of heavy stress testing,…
If you need to incorporate NEMA17 or NEMA23 motors in your design's, the simple openSCAD fully parametric script that will generate you nema17 or nema23 object Instructions call nema module Category: Other
got some marble kit (cascade lena) for my kids and they love it so I created some addons all uploaded stl's are tested and work ok, thing is "in progress" as I'll be probbly uploading more parts in the future Category: Playsets
box for cheep ch340 prc usb2uart adapter CH340G RS232 Upgrade to USB TTL Auto Converter Adapter STC Brush Module Golden or any of the other "golden" adapters: ebay search: CH340G Module Golden no clips are designed to keep it as small as…
Modified to allow both two different pushfits (e.g. I have 10x1 for 4mm and ½" 18TPI for 6mm PTFE tubes). 4mm PTFE tube comes from AMS and 6mm PTFE tube comes from dry box. If you want to use both 4mm PTFE tubes you can use original part…
slight change from original removed bottom access holes (I don't need them, I access all gpio pins from the top, bottom is just allowing crap from the table to make shorts) had to cut of pieces of pcb support as on number of boards…
Simple parametric object that can be used as a probe holder. Parameters to the module are number of probes to hold (4 probes by default) height of the holder (20mm by default) Instructions Print screw or glue use Category: Other
ER11 collet holder for both metric and imperial collets note that height of the cover is bit over the base; that's intentional since length of the collets is not that universal. good way to make this work better is to glue piece of felt…
The simple object to test the maximum overhang 3D printer can deal with. The angles are, top to bottom: 90° 80° 90° 70° 90° 60° 90° 180° 90° 55° 90° 50° 90° 45° 90° 40° 90° 35° 90° 30° 90° In short, the bottom part is…
Z motor bracket modified for nema23 motor. This one requires printing with support or a finely tuned machine that can span 6cm. There is "no notch" version that can be printed without support but you need longer shaft / longer pulley then…
Box for RLC meter designed by Nikita Afanasyev. It is made to fit the PCB designed by Aleksandar Krstic (pcb rev1.0) The link for the RLC meter (description of use, schematic, firmware, discussion):…
print 2 pieces attach to each end of the cardboard tube from your toilet paper use as a spool for wire, string, whatever.. both openSCAD and SolidWorks sources available Category: Tool Holders & Boxes
bearing clip for http://www.thingiverse.com/thing:1533880 print 0.2mm 100% infill Category: 3D Printer Parts
FIX FOR https://www.thingiverse.com/thing:3577456 fixed base - had some intersection errors fixed front/back pannel - had some intersection errors fixed collector - parts were not merged and were separated after print Category: Toy & Game…
Since Thingiverse is not usable any more I created a copy of the project on MyMiniFactory : https://www.myminifactory.com/object/3d-print-nozzle-wipe-for-ender-5-118314 Nozzle wipe for Creality Ender 5 NOTE: I do not use original hotend,…
MGN12H G5+Mosquito/Mellow tool carriage with part cooling ducts FINALLY TESTED AND WORKING - 24h print done, no issues Version with Precision Piezo holder available too: https://www.thingiverse.com/thing:4189461 (btw, no clue why is…
thing:689333 modified so main guard is sturdier (2mm instead of 1) 4 pillars to allow top to be glued top piece to be glued on top of the pillars of the bottom guard This way it looks IMHO better and even if the cx10 drops on the head it…
My kids are constantly breaking comb on the https://www.printables.com/model/483994-balisong-comb (even printed in ABS or ASA or HIPS or PA, even PA-CF) so I made a solid piece for them to play with to test tricks. This blade fits V5 and…
Yet another FanDuct for Titan Aero. Uses the fan holder by GaryK47 and standard 50mm blower. I tried bunch of duct's available and they all blow air all around and are not focusing air properly, I tried modifying some of them but finally…
Modular X-Carriage for M150 (and similar i3 clones like wanhao duplicator i3) NOTE: This is useful only if you are actually using different tools often and planning to change between them on a single printer (for e.g. I switch often…
don't you just hate it when you have to replace the whole wc board 'cause those plastic distancers pop out and get lost, or break up, crumble... freecad source available, the values are not in separate table but there are 2 sketches in…
extracted only the bed from the whuge detailed stl of the whole Ender5 as I don't need whole printer model inside a slicer with all the screws and belts and... bed is enough .. simplified the bed mode to cut down the number of polygons,…
PP3DP UP Plus and UP Plus 2 are usually terrible with printing PLA. Three major issues with these printers are The throat of the hotend gets too hot as heat creep up the steel tube and the PLA starts to bulge there and gets impossible to…
I looked at some solutions for wanhao and similar i3 clones like http://www.thingiverse.com/thing:1672640 and the remixes but they all don't really fit Malyan M150 properly as M150 comes with 3 linear bearing blocks that are different in…
Olympic Games 2016 are the first one to come up with a 3D LOGO They are giving the 3d printed logo instead of flowers it's awesome so .. here's a model if you like to print it yourself :D How I Designed This I used…
Simple stand for ANKER A2567A PowerWave charge pad print with 2 perimeters, lightning infill 15-30% This will make object completely empty and light so you can pause mid print and fill it with stones and marbles and sand and... whatever…
MKS does not make the super high-quality boarda so this "smoothieboard clone" is the same, it is not horrible but far from the original. Since I'm running the motors at max 2A and since the thermal properties of the board are not…
Adapted the X-carriage so it can house BMG extruder + motor instead of G5 Still using PP but you can attach extruder directly to BMG if you like. If you are not using PP, there is a mount point for BLTouch BLTouch X offset = 0 BLTouch Y…
Simple holder for Dual Flex3Drive for Ender 5. I was told Ender 3 uses same carriage so this might work for Ender 3 too but I have not tested, if you do test please comment. Printed in PETG but any material should work (stiffer the…
skinny holder for a tektronix plug (AM503 current amp is what I use it with, but any TM500 module ( http://www.barrytech.com/tektronix/tektm500/tektm500.html ) should work. I don't have the tektronix power supply where this TM500 plugs go…
Found another cap ( original name "DJI4 lens cover_LenseGap.stl" no clue where I found it this one: https://www.printables.com/model/1039265-dji-osmo-action-4-lens-cap ) that fits action4 good and modified it a bit thickening the bottom…
The stock PP3DP "wind barrier" for UP Plus, UP Plus2 and some similar printers (Afinia etc.) is ok for PLA but for ABS the air passing trough "closed flap" makes ABS prints warp. There's a nice upgrade PP3DP Up Plus redesigned wind…
With UP Plus2 you get the "auto bed leveling" sensor, it's a 3d printed piece with a microswitch, banana connector and a magnet. You normally attach it with magnet under the extruder motor and run the bed leveling calibration. I'm using…
I modified original only slightly so that I can fit it on M150 and ramps1.4 + RepRapDiscount Full Graphic Smart Controller (moved the SD card slot ). You will need either a sd card "extender" like http://www.thingiverse.com/thing:1335637…
if you printed http://www.thingiverse.com/thing:1533880 or something similar and you switched the sides of 2+1 bearing so now your bearing is not hitting the stop switch and you hate to move the switch to other side .. here's a small…
If you got your Open Bench Logic Sniffer from Dangerous Prototypes http://dangerousprototypes.com/open-logic-sniffer or Gadget Factory http://www.gadgetfactory.net/gf/project/butterflylogic/ you might found that with unprotected underside…
very simple part, goes around your Y tightener and keeps it straight, allows for an idler pulley to be screwed on the bottom (M4 screw and semi trapped traveling nut) so you can tighten your belt. I'm using GT2 pulleys on new Z motors…
Titan extruder module for Modular X-carriage for M150, Wanhao I3 and similar printers Assemble your Titan extruder (or Titan Aero) with bracket it comes with (it's also available on thingiverse ). Make sure you turn the bracket so that…
3-point plate (hot bed, glass, alu plate...) holder for Y-carriage from: TEHNOLOGIKA why? - I'm not using the aluminium plate at all because have a piece of borosilicate glass that has heater glued directly on it so no screws in/trough…
X-Carriage (for Wanhao Duplicator I3, Malyan M150 and similar I3 clones) that can carry dual flex3drive extruder drive. source "files" (onshape) I'm using this flex3drive dual driver with 2 hexagons (one 1.75mm other 3.00mm) and am now…
Big reels of filament tend to collect dust ... dust tend to mix with the hot plastic an clog the extruder nozzle .. clogged extruder nozzle == frustration This is a simple part that will help you clean the filament from dust before it…
This is the Y pulley for MENDEL. It replaces one of the drive-pulley_3off pulleys and features a rim so your belt don't slip from the pulley. Instructions Print put on your Y stepper motor Category: Other
If you mod your M150 to link Z motors with https://www.thingiverse.com/thing:2900617 you need to raise the whole printer a bit (20mm is enough). You can use simple blocks of wood to do it or a rubber cubes... I designed these feet to go…
remixed the Z endstop for wanhao to work with Malyan M150 onshape source: https://cad.onshape.com/documents/709f52ff0c2716e81a56bc12/w/2f7ac71d45eb9132ac30af89/e/0310fe934e70eeae77f49cbd the spring and the plastic cups you can see on the…
RAMPS holder for Malyan M150 source available on onshape attaches to the top of the box using 2 mount points original melzi uses, the other side of the holder should be either glued using hotsnot (what I did) or using double sided tape.…
Model of the BFB's ( http://www.bitsfrombytes.com ) hot end (best hot end I tried). Unfortunately not easily manufactured if one does not have access to some fancy tools, but luckily BFB sell them as parts. modules in the scad file:…
I have easy access to second hand nema23 motors and they are much cheaper then nema17's I can find in the neighborhood. This is why I am modifying my Mendel to allow Y and Z to be run using NEMA23 motors. Instructions Print, use Category:…
WHY: BFB hot ends are very robust and easily obtainable. BFB even sell them assembled and with various nozzle sizes. They are aluminium+peek+teflon so very strong hence you can use them not only for ABS and PLA but also for HDPE, LDPE,…
I own a rapman (bits from bytes laser cut reprap derivative) and looking at many designs I like the extruder this guys made very much. The extruder is divided in two parts (linked with 2 screws) - the "drive" part where a stepper driven…
Simple holder for flexy shaft (I use the Einhell flexy shaft but Dremel one should work too - the inner dia of the hole is 21mm). It can hold a marker or a pen too. Instructions print put M3 nuts in a slot put M3 screws in a holes put the…
Parkside water hose wall mounted self retraction spools work nice for a short while and then slowly the spring inside stop having enough umpf to retract the hose completely. This is a tool to help you wind the spring more. Also, sometimes…
Piezo disk assembly for the flex3drive module for modular X-carriage . Intended to be used with Precision Piezo electronics and disk. print secure the piezo disk in the flat ring (20mm piezo disk holder.stl) flat ring goes directly under…
ikea knarrevik 005.763.18 is ideal for supporting Bamboo AMS/AMS2PRO print 8 of this pieces and you can put one on the other and support them whit this connect pieces, just slide over, works great I printed in PETG, 999 perimeters but PLA…
ikea knarrevik 005.763.18 is ideal for supporting Bamboo AMS/AMS2PRO print 8 of this pieces and you can put one on the other and support them whit this connect pieces, just slide over, works great I printed in PETG, 999 perimeters but PLA…
These are all currently available results.
