Counting matching models…
This little rake prints with a tiny brim on the end you should cut (not peel) off. Decongest your fan! This rake doesn't clean ALL the debris from your fan. Please be aware this is only a rake and your fan still requires periodic…
A quick but sturdy print bed scraper that's intentionally long with open infill so that you can also use it to swipe at the purge material. It will catch in the infill and drag away cleanly. To fit the Prusa Mini use the 3mf and scale to…
Push your broom between the jaws and it will stay. Printed w/ Filaflex40 and PLA. The flex part came out kind of stringy, but a quick torch clean up of the business side, and it looks great. I left the string on the back to assist in the…
Oscars award trophy. Galaxy Black and Viva La Bronze (Gold). Use the text function in PrusaSlicer to personalize your Oscar. If you choose to slice it yourself, be sure to put the seam on the back of the statue. EDIT Jan 2024: Included an…
Supplies Needed 8x3 mm Magnets (2 required) & superglue to hold them in. Magnets are optional. Description A small jig to guide your screws and nails straight and to protect your fingers. The tip is printed with 50% infill so a hammer or…
Use to mount your XBOX X/S controller to your wall or your race rig. Holes are sized for two M8 bolts or just use zip ties.
14 Infill Samples with a case. Everything can be printed on a Prusa MINI . Simply download the 3MF file to PrusaSlicer and change the printer type. I had great success printing them in batches of 2 at a time (split left and right) and I…
This is a real test of the accuracy of your printer. Most tests have a gap range of .15 mm (.0059") to .50 mm (.0197"). That's a wide range and it's targeted for a wide array of printers. With advancements in printer and slicer technology…
A clip-on filament guide that works with all the top mounted filament holders and cradles. It's a snug fit so that it isn't easily knocked off. You have to push it down on the frame before you try to clip the bottom.…
A simple battery cradle with a color change to pop out the brand name. Can be standing on your bench or mounted on the wall. The infill is strategically modified to withstand use and mounting. Open hex pattern allows you to press and see…
My SpaceX grid fin. Straight off the Falcon9, to your shelf. Keep your hands and feet inside the vehicle at all times and enjoy the ride!
I like the original Scraper by Visle but it seems unfinished. I made a couple changes and used a color change to highlight the frame. The red and black scraper is printed at 150%. Great for large hands.
A robust holder of HDMI size cables & a smaller version for USB size cables.
Gear knob for Prusa. Two colors with no MMU. I printed a bunch to fine tune the design and test color combos. The teeth make it very easy to rotate the dial with 1 finger and the center has a nice bowl feel. The fit is a little tight with…
U.S.A. Flag. In celebration of Independence Day, July 4th. No MMU required. Measures approx. 9" x 5" and can be standing up on a desk or mounted on a wall. Print instructions No MMU is required. There are 4 (M600 automatic) color changes,…
Requires: 2 Skateboard 608 Bearings (22x7mm) & a 5 gallon bucket Here's a rolling log suspended over a bucket. It's a tried and true method of catching mice. Place peanut butter around the middle and your furry friends will walk out for a…
Chunky print bed scraper with inlaid hex. It can also be printed with 1T by adding a M600 color change above the inlay. Matches with my XL tool rack nicely. T1 = Frame (Orange) T2 = Hex inlay (Galaxy Black)
My Dewalt Stick Vacuum is quickly becoming my favorite tool. SUPER cheap compared to a Dyson. I already have several Dewalt 20v batteries, and it's right at home in the garage for a quick tidy. Only problem was: there was no wall mount…
Very nice set of display quality sample chips for PrusaSlicer's Infill options. 13 samples and a Rolodex style case complement any designer's shelf. Each chip shows the 10% and 20% infill values, which is handy when evaluating your design…
Full set of dry Formula 1 tires on a Lewis Hamilton display stand. I've included a blank nameplate STEP file that you can add your own name to. Extrude your name .04" [1mm] on the blank. Someone requested I make this, so I looked to find…
A freestanding NASA Worm logo. Measures 7.75" [196.8mm] long. My previous version was a little smaller and sloped so that the face printed smoothly. This gave it an angled look, which didn't look bad, but not as proportional as a logo…
A debowler (ashtray) slightly modified for ease of use. Wide landing spots for stogies and a center spire capable of gouging out bowls. A smoker's tray. Print instructions I used PETG because it stands up to the heat a little better.…
Here's a 2 color knob (with M600 color change) shaped like the Open Hardware Logo. No supports necessary. I recommend Black and your favorite bright color... or your favorite color and your other favorite color? Perfect for the sample…
Wall mountable flag in the outline shape of the United States. Print instructions Automatic (M600) color changes. Black White Red Blue White again (preferably silk white for the stars) Mount on the wall.
A TUSH style top mounted roller filament holder. Two sides for double 1kg spools or extra large 2kg+ rolls if you put it in the middle, across all 4 rollers. I've seen it used with 5kg spools. Having a sturdy base for the heavy spool to…
A belt buckle style lens cap holder w/ a color change at the top. Holds my DSLR kit lens perfectly. Edit December 12, 2022: The standard version accommodates a 1.575" strap. I included a new version to fit 2.00" wide straps.
The Sunlu S2 is great, except the fact it's base is not very wide and the whole thing tips over a lot. At least mine used to. The 2 piece base screws together and clamps onto the dryer box. You'll need 1 M5x30 screw & 1 M5 nut Insert the…
It's the NASA "Worm" logo freestanding. Measures 6" [152.4mm] long at 100%. Some of us can go 150% ;) Print instructions Printed at 100%, no rafts or supports. Very clean print. I printed it in Fire Engine Red (Pro PLA) from 3dFuel, and…
Extrusion indicator in the shape of the Open Hardware symbol. Requires two 8x3mm magnets and some superglue. Print instructions No supports. One color change. After it's printed, please scrape the recess so that the magnets will sit flat.…
A desk ornament shaped like the Open Hardware Logo with open infill. Approx. 4" diameter x 1" thick. Compliments any Maker's display shelf. I printed it in green. Print instructions I printed it in a Prusament Green and there was zero…
A display stand for your Fanatec Formula V2 or V2.5 wheel. No supports. Printed in Galaxy Black. Can also be printed on a Prusa Mini.
UNC 1¾-4 Threaded Nut and Bolt. I printed the sample nut and bolt and I wanted to see if I could do better. I think I did. I've printed it several times, fine tuning the offsets to near perfection. I kept the layer height at .25 for speed…
Mounts on top of the MK3S and uses skateboard bearings to eliminate resistance and vibration from the spool. Print instructions Print in PLA. Use a short piece of filament to create the filament guide. Uses two 608 skateboard bearings. No…
Fly the Spool-ship Shelf proudly. Looks great as a stand-alone shelf or print a squadron. Use 1 Prusament spool flange as the top shelf. Print instructions No supports. All three parts are on one build plate, but you can print them…
Tweezers to grab small magnets. Holds 8-15mm magnets. There is also a separate model included (by request) for 6-10mm magnets. EDIT 2022-05-26 Added tweezers for 4mm magnets by request Print instructions PLA, no supports.
Required: 4 Skateboard Bearings (22x7mm) Holds spools up to 4.15" [105mm] wide. Here's a hexagon themed filament cradle (spool holder). Tush style so there's low but consistent resistance. There's a stripe of color in all the parts, so…
Better top mount system for the Prusa MK3 or MK3S. Low resistance roller reduces resonance of the spindle rocking above your printer. Easy to replace the filament and it holds the filament spool straight! Holds 1 KG rolls perfectly. I…
Use an M8 bolt to mount your Stream Deck Mini. 2 color changes for the stripe. No support.
A small holder for your calipers that requires one 8x3mm magnet (glued in). The ruler holder requires two 8x3mm magnets (I also threw two 10x2mm magnets over the screw hole). I've included two ruler holders for two different widths. Both…
Directly from Easter Island, the Moai stand ready to hold your business cards. For the card holder contest.
Mount your T818 wheel to the wall or your rig. Insert a quick turn to the right will click it in and lock it in place. To remove, turn the wheel 20 degrees to the left and pull straight out. The notches in the face indicate the lock and…
Beefy handle to use on a gate, or anywhere. 80% infill around the screw holes and spine, 15% everywhere else. The files attached do not have any lettering, unlike the sample I printed for my gate. If you want a model with your own…
SpaceX landing pad from the drone ships "Just Read the Instructions", "Of Course I Still Love You", and the newest one “A Shortfall of Gravitas”. Print one or all three. Print instructions Start with a base color of Charcoal Grey or…
Prints very easy. No supports required. Start with Black, then halfway through there's a M600 color change. Use whatever color you want, the shinier the better. Use two 8x3mm round magnets glued together, then glued to the back of the…
Organizer carousel with 6 hinged bins per level. Multiple levels of various height bins are possible. Holds everything from pens and picks, to screws, paint bottles, superglue, and tools. Doors are secured nicely with magnets. Portable as…
This is a TUSH2 style filament cradle that eliminates the vibration caused by the spool rocking. Provides just enough resistance to roll smoothly under all condition. I provided the gcode for both a striped version and a solid color…
A swirly extrusion Indicator. Three colors with no MMU. Two 3x8 magnets glued together, then glued into the recess on the back. Print instructions Uses 3 (M600) filament swaps. Start with black (or whatever you want the background to be),…
Greet the snow with joy. Make a mini snowman or dozens of them. Print this twice to make the perfect snowman then decorate him up. The mold makes a 7.00" [177mm] tall snowman. You can scale it (Version1) down if you want smaller men. Have…
The NASA worm logo pops off the table in this silk filament. Looks nice coming off the black base. Print instructions There's a M600 color change when it starts printing the letters. I started the base with Prusament Galaxy Black, then…
Resembles a Like Button from many familiar websites. Much like the 5 star rating you should rate this model! Holds 6 SD Cards and 3 MicroSD Cards... and pens. Print instructions The cuff and hand are separate parts on the same 3mf plate,…
Your Stream Deck Plus clips in after you remove the stand. Mount this anywhere within reach and you're good to go. Please send back pics of it in the wild.
A 2" swirly extrusion indicator with built in filament change (M600 - without a MMU). I recommend Black for the first color, then red, orange, or anything bright. Two 8mm magnets are glued together, then to the back (in a magnet recess).…
Ever get your cloth patio umbrella too close to the porch light or the fire pit? This is a clip to capture the cloth and the umbrella spoke together. Simply pull the cloth down to the end of the spoke then clam shell it together with a…
A tool to use when you're changing the PTFE tube in your hot end of the MK3S+. Yes, they wear out so I change the PTFE tube every time I change the nozzle. You have to hold the collet down while pulling the tube to get it out, and you…
A 360 degree bottle opener that looks a little open source hardware symbol-ish. Two color changes to highlight the handle. Paint on supports for the center come off very easy. Mine stayed on the plate. The print settings have 3 wall…
NASA's iconic worm logo on an angled plaque. Approx 170 mm (6.75") long. Print instructions There are two sizes in the 3mf. 170 mm and 100 mm. I haven't printed the 100 yet, but that's coming. I printed the 170 using Prusament Mystic…
7 slot corral for various usb cables. The screw holes are reinforced with 50% infill so they won't crush when you mount it. The lip has fuzzy skin.
Multi-layer sign (No MMU) asking people to please wear their masks. Perfect for any public place. Can be hung via center mounting hole or propped up on counter. Print includes a back leg that needs to be superglued in place. Sign is…
Here's the open source hardware symbol bottle opener, or OPEN BOTTLE SYMBOL. There are two color changes. Start with black or your background color, switch to the primary color (yellow in my sample), then finish with black again. I used…
This is a button in the shape of the open source hardware symbol. Measures approx. .800" [20.3] diameter. One M600 color change. No MMU
6 tessellated heart shaped turtles. 3 color changes. Print 2x (so 12 turtles) then print the frame. Colors are dealers choice, but I recommend alternating between 2 shiny colors then alternating starting colors for the 2nd plate. Also…
Fans of American Football commonly play “Squares” for the Super Bowl. Many offices and groups enjoy a little wager on the game to give everyone something to root for. I've attached game sheets so you can start up a game with your family…
An offset funnel to get water from a spigot with limited access. Ever want to fill your water bottle with water from the fridge but the bottle won't easily line up with the stream? There's a line of support to help prevent much of a beard…
This tool rack is designed to fit securely on the side of the MK3 and hold all the tools that come with the MK3 plus a couple extra items like a flush cutter and a Hex Scraper. Holds the original Hex Scraper or my remixed Hex Scraper II…
A larger version (14" tall) of my SpaceX Gridfin. Sized and revised for the Prusa XL 2T. Print takes a long time, but it came out perfect on the XL. My original model curled up at the edges on my MK3. The XL wins this battle by a KO. Mine…
There is a bungee cord on the side of the pressure washer but there's nothing to hook it onto. This is a small press-on piece that allows you to roll up the hose (or the cord) and hang it on the side of the pressure washer, then stretch…
Extrusion Indicator with Josef Prusa's face over an open-hardware symbol. 3 (M600) color changes utilizing 4 colors. Use two 8x3mm magnets glued together, then glued onto the back of the indicator. Print instructions There are 3 automatic…
A small tool for the contest that will help you rake the dust and debris from inside your extruder fan. I used 3 colors but you can do you.
When you need to transfer the blind hole locations from one part to another surface for mounting. Nip the tip of the DG to length. Put the DGs into the holes of whatever you're mounting, place it where you want it on the wall and tape the…
Prints with a color change at the back plate but stick with black if you don't want to change colors. This is for face mounting your MK.2. I also have a deck mount version if you're interested.
A not-so simple hook for your Dirt Devil. It looks like it's a bolt coming out of the wall. Prints in two pieces. The washer against the wall and the nut are the first part, then the screw in the middle is the second. For the first part I…
Designed with (60 degree) "small" bowls and (120 degree) "wide" bowls. Mix and match sizes and colors. Sheet 1 contains one size of each, and you'll need 360 degrees worth. Print the rest of the sheets once each. There are small custom…
A dust cover for your psvr2 PSVR2 Lens Cover
These are all currently available results.
