Counting matching models…
My version of Prusa's PETG Prusament Clamp with three cold shoes (old school camera flash mount made of non conductive materials). Provides convenient mounting points for lights, flashes and other photo accessories. Design The “design” is…
Simple Gridfinity bin for screws and what not. File names are XxYxZ_with_magnets_and_tab.3mf where X, Y and Z are the dimensions in Gridfinity grid Units. Design Created in OpenSCAD using the amazing Gridfinity Rebuilt library. Updates…
I'm always looking for excuses to do another 45° twist lock design, I'm always misplacing my readers and there was a Printables contest. Time for a glasses case. Design Highly parametric design done in Fusion 360 (F3D included). Rough…
Simple container with filament holes at either end. Designed to hold a piece of foam inside. The foam wipes dust off the filament as it passes through. The internal dimensions and 45° twist lock cap are the same size as my 2nd generation…
Model of the common 1-2-3 Block setup tool found in machine shops all over the world. The name 1-2-3 comes from the block's dimensions: 1" x 2" x 3". The holes are 3/8" in diameter. While an FDM 1-2-3 Block probably isn't precise enough…
Updated version is here ! Fitting to allow passing filament out of a dry box and into a PTFE tube. Inspired by CNC Kitchen's filament dry box . Sized for a 4mm OD / 1.8mm ID PTFE tube and a clear plastic tote with walls approximately…
My updated version of a bracket for a spool holding rod in a filament box. Inspired by CNC Kitchen's filament dry box . My previous version was here . The main addition to this version is a backing plate that goes on the outside of the…
Yet another AA battery holder - but this one says "CHARGED"! In its default form it holds 36 batteries, arranged 6 x 6. I tried to make the Fusion 360 design completely parametric so you should be able to change the number of batteries to…
Came across this outstanding graphic and decided it needed to be turned into a fridge magnet. Design Loaded the artwork (I believe I originally found it on MyStickerMania ) as a PNG into Adobe Illustrator, traced it, exported it as an…
My second generation of a fitting to allow passing filament out of a dry box and into a PTFE tube. Inspired by CNC Kitchen's filament dry box . Sized for a 4mm OD / 1.8mm ID PTFE tube and a clear plastic tote with walls approximately…
Do you need a simple name tag but you want to create it using an OpenSCAD file with more controls than an Apollo Command Module? If so, do I have great news for you! You've got controls for tag length, width, thickness, corner radius and…
A little widget for providing a little bit of protection to an SD card. The card slides in from the bottom. Designed to be printed in Ninatek Cheetah TPU, it should work in PETG but I haven't tried it yet. I'm including the Fusion 360…
A simple magnetic widget that securely holds cross-stitch needles and threads to the piece of fabric being worked on. Works in pairs. One needle minder goes on top of the fabric and one goes on the bottom, directly underneath the one on…
Trays and lid for holding Bernina Artista 170 sewing machine bobbins. While I'm sure the bobbins are used in other Bernina models I don't know which. Each tray holds 25 (5 x 5) bobbins. Trays stack together. The lid snaps into notches in…
The Warboys symbol from Mad Max Fury Road in refrigerator magnet form. Includes an internal space for a 18mm diameter, 5mm thick magnet. I'm including the Fusion file if you want to change the magnet pocket dimensions (there are…
A simple holder for E3D V6 nozzles with a twist lock lid. Holds up to 10 nozzles. Labeled slots for two each of 0.2 (or 0.25), 0.4, 0.6 and 0.8 nozzles. Twist lock works with a 45° turn. Design Fusion 360 design, partially parametric for…
You've waited and waited and finally taken delivery of your Ford Bronco. Maybe you're a Brisbane or Denver Broncos fan. Maybe you've got a little bit of two filaments left and you want something to print. Well, here's the print for you!…
A variant of my Rotating Sharpie Caddy designed to hold lock picks. Has slots for five Peterson picks and seven Multipick picks. The thinner Multipick slots do a fine job of holding top of the keyway tension tools. Design Parametric…
Key-in-Knob and Interchangeable Core locks can be difficult to hold and position for locksport picking due to their shape. Even small vises, such as a Pana-Vise tend to bind them up, making them impossible to pick. These prints are…
ISO 7010 has warnings symbols for all kinds of stuff but it doesn't cover everything. I wanted to make warnings for some of the things the ISO missed. I wanted them to be triangular like the ISO symbols and about 80mm (~3 inches) on a…
When vacuuming your pool you can connect the hose directly to the return under the skinner basket but this runs the risk of pulling larger debris through the lines. With a vacuum adapter plate on top of the skimmer basket debris gets…
I needed a something to keep my PyPortal Titano steady. I also wanted to keep components and pins from potentially shorting out if I set the Titano down on something conductive. I wasn't happy with my designs for a full case so I came up…
Show your Mitutoyo 182-1XX steel rule some love! Give it nice jacket to protect it from scratches and keep its sharp corners from scratching other stuff or tearing your laptop bag. While designed specifically for the Mitu 182-105 this…
Stan Marsh and Kyle Broflovski from the show South Park as simple single color key chains. Their faces and hats are extruded to different heights to give them more interest than simple outlines. Both are roughly 40mm wide, 50mm tall and…
Although it's been all but been replaced by nylon cable ties, there is still no more elegant way to bundle wires and cables than lacing tape . Lacing is lower profile than cable ties, it is less likely to pinch delicate wires and it…
Do you love 3D Printy's bobbleheads or one of the many models that use his baseplates and springs ? Do you lament your inability to quickly mount one of these fantastic bobbleheads to your camera tripod? Well, here's the model for you!…
Bin, jar or container to hold 1/4" (6mm) hex driver bits. Includes a screw on cap. Threading follows SP-400 standards. 3MFs provided for holders for 7 or 19 bits in 3 common lengths (25, 50 and 89 mm) Design A fully parametric OpenSCAD…
Do you love 3D Printy's bobbleheads or one of the many models that use his baseplates and springs ? Do you lament your inability to mount one of these fantastic bobbleheads to your camera? Well this is the print for you! OpenSCAD OpenSCAD…
Need to get your VRD Mullet off its tires? Here's the print for you! Design Fully parametric Fusion design (F3D provided). Key parameters are axle height and width. Each front and back stand prints as three separate pieces. Two identical…
You use Magigoo to keep your prints from getting loose, now you need a way to keep your Magigoo bottle from getting loose. Why not mount it on the Multiboard panel you've got right next to your printer? This is a holder for a single 50ml…
These are all currently available results.
