Counting matching models…
Easily mount your Ryobi tools, as flat as possible, to a wall No supports version: Top = Great finish / Underside = OK finish at 0.20, Great finish at 0.15 With supports version: Top and Underside = Great finish even at 0.20 Standard…
This was my first time coloring something, I then printed it at 200 scale with Prusa PLA as follows… 1 = Yellow 2 = Black 3 = Red 4 = Pink 5 = (not used)
Multiple options for storing your Ryobi USB Lithium batteries or Inkzall Large Chisel Tip Jobsite Markers… On your workbench On a wall On a Ryobi Link rail Under a shelf …screw mount to any surface, use with a link rail cleat, or screw…
Updated 05/22/2025 Allows for the use of two Ryobi 18v batteries in place of a 40v battery. Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern Grid - 3…
Cute Stylized Dinosaur Toy + Santa Hat = More Cute In the pictures I painted the hat, printed one color with PLA NEW: I've uploaded an XL multi-color version! Supports are needed under the tail and legs
For pulling CAT5/6/7 cable snag-free through other mess of cables / drop-ceiling / raised floor Works when pulling just one cable out of a mess of cables, or when pulling a new cable through to replace a broken cable. Note: Always use…
Multi-bit holder for the Ryobi P251 Brushless Hammer Drill/Driver Snap into the tool's single bit holder, then slide in over the screw hole Bits slide in from front or back Suggested print settings: - 0.20mm QUALITY - Prusament PETG…
This is a rather beefy mount to hold the Ryobi … Ryobi P251 Brushless hammer drill-driver P3150 Heat gun …upright, and without having to remove the battery. I discovered it can also hold … PBLMT50 Brushless Multi-tool (only horizontally)…
Updated 04/22/2025 Easily carry two 18v batteries, prevent rowdy batteries from tumbling about in your tool bag, option for electrical connections. Prevent rowdy batteries tumbling about in your tool bag! Suggested print settings: -…
Prevents things (usually my pants or shirt) from getting sucked into the air intake. Snap-in fit, removable Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% -…
Plastic Screwdriver Bit Prevents marring of painted screws commonly used for wall switch plates!
Printable wrench mount that works with Ryobi link Requires Qty.3 M4 0.7 8mm cap head screws Pictured with Husky wrenches, tested with both SAE and MM, should work with most others as well. 9 slots, need more? print more! Suggest printing…
Replacement front faceplate/bezel for a laptop style CD/DVD drive After printing, you may need to trim the stem to hit the button properly
Ryobi battery mount with option for electrical connections. Wall mountable with two flat head screws. Easily store spare batteries on your workbench, or connect them to other electronics (maybe a battery backup for your 3D printer ) See…
This remix allows for an air-gap between the supply and the mounting surface. STL's included for the original 45 deg offset screw position as well as a directly below/above screw position for space constrained areas (as pictured) “Power…
This bin has a reduced wall height so you can still get things in/out of it when another bin or a shelf is mounted directly above. Available in quarter less high and half less high versions. Update: Instead of printing the versions of…
No supports Lego-like studs for the excellent Lego Wreath by @MagnumDanger_44252 Prints nicer without supports when using 0.4 nozzle and 0.20 layer height Note that in my pictures I printed… - 6 branches at 150 scale (on the XL) resulting…
This bin has a reduced wall height so you can still get things in/out of it when another bin or a shelf is mounted directly above. This bin is wider than a normal bin on one side, use the extra space at the end of a Link rail or to fill a…
Instead of tying the apron string behind your back, attach each string to this buckle instead. Designed for the HomeDepot associates apron, but likely works with many others. PETG suggested for strength and durability, no supports.…
Now hold 3 different cutters / pliers / wire strippers to any Link rail Print in the orientation provided but add smart fill support under the 3 holders Strongly suggest using PETG (pictured using OVERTURE PETG Grass Green ) Don't have a…
Needed a way to convert a 18650 cell to fit in the BT-20 Wingman power bank which is sized for a 21700 cell. Requires two 10 x 2.5 mm magnets (commonly sold as 10 x 3 mm) press fit into the end. Suggest PETG for strength, no supports.
These keys can be inserted in the lock hole and help you identify the drives, as well as twist to unlock Print the pegs separately, then add a drip of superglue and insert into the key, if it does not fit simply sand the edges a little.…
Prevent your laundry bottle from dripping on the floor and/or hold the cup underneath. This is a remix of: https://www.thingiverse.com/thing:4924564 I modified it to fit my style of wire shelving
Updated 05/22/2025 Allows you to power your tools, fans, speakers, lights, and some inverters from either… A) cable which connect to a distant battery, dual 18v batteries, a bank of some other make/model batteries, a powerful enough…
Need a way to keep cups of parts from rolling all over your work surface? Need a way to hold your favorite drink? This is the solution you've been waiting for! Suggest printing in PETG because garages can get hot. Pictured using OVERTURE…
Wide cable clip for a variety of uses, allows for screw-down or double-stick mounting, open/close to add/subtract more cables. “cable clip single tight” - in this version the closed grip is a little stronger, and comes out looking a nicer…
This is based on Battery Holder for Ryobi 18V battery by Walpeup December 29, 2015 https://www.thingiverse.com/thing:1234683 However... the bottom part needed to be just a tad bit deeper so the battery (4Ah, 6Ah, 9Ah) would clip in…
This is intended to prevent fingers from entering a bulb socket where you didn't put a light bulb. Easily screw in/out using a coin or a screwdriver. Why you don't just put a light bulb in there is up to you, but now you can put this…
I designed this single gang outlet / switch box to hold a zooz scene controller on my desk. Revision 1 - uses cable grommet or strain relief plug on the cable, print orientation should be screw holes facing down onto the build plate with…
Printed it at 150 scale with PLA as follows… For diamond pickaxe (blue)… 1 = Illuminated Blue (lighter) 2 = Blue (darker) 3 = Light Brown 4 = Dark Brown 5 = (not used) For Iron pickaxe… 1 = Grey (lighter) 2 = Grey (darker) 3 = Light Brown…
Designed for the HomeDepot FIRST Phone (new version), but applicable to other smart phone/scanning devices as well. Intended to be clipped to your belt or pocket. “closer” clip version is suggested for pocket. Holds the FIRST Phone (with…
Sometimes you need to mount something to the rail that is offset/between the normal Link rail mounting location, maybe to avoid a tall tool mounted on the rail below, or a wide thing that is mounted to the left or right. This adapter…
Needed to get my roomates airplane off my workbench, solution: hang it on a wall. Hooks grab the landing gear wheels, adjustable distance in case he gets a different plane someday. Printed with PETG, no supports.
Keeps electronic resistors neatly organized Shelf is 8 x 5 so 40 drawers Option for one big drawer or double compartment drawer
This is a giant Lego look-a-like Plate, Round 2 x 2, with Axle Hole designed to fit with the excellent Lego look-a-like flowers designed by glx0711... found here... https://www.thingiverse.com/thing:4283065 and here...…
Magnetic mount for LED strips. Uses 8mm x 3mm magnets I'm using this with LED strips that are 9.98mm wide but it will accommodate up to 10.2mm Need it longer? …print more and line them up end-to-end!
This strong peg allows you to hang some tools, or a hose, or extension cord right between the normal link rail mounting location Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) -…
When you have ladders/plywood/pipes/whatever hanging out your tailgate and it won't close, it beeps all the way home, and that's annoying! Insert this into your tailgate, the locking mechanism will grab it, and then it will shut up.…
Updated 05/22/2025 NOTE: There is another version of this adapter, before you print this, check out… https://www.printables.com/model/615935-usb-c-65w-charger-compatible-with-dual-ryobi-18v This printable adapter allows a single Ryobi 18v…
Updated 04/22/2025 Easily mount two 18v batteries with electrical connection Supports 18v in series for 36-40v output (optionally incl. a “center tapped” 18v output via the 3rd PowerPole pin or leave disconnected) Supports 18v in parallel…
Mounts for... - QuinLED Dig-Uno ...more info: https://quinled.info/pre-assembled-quinled-dig-uno/ - QuinLED Dig-Quad ...more info: https://quinled.info/pre-assembled-quinled-dig-quad/ - Mean Well RSP-320-5 300W (60A) 5Volt Power Supply…
Different sets of holes let you can decide the mounting height. Two M4 16mm and one M4 20mm screws are required (do not use super-glue) When you print the cleat, in PrusaSlicer, unlock the scale factor and increase Z to 16.5 or 17.0…
A simple mount for Rasberry Pi Zero.
Updated 05/22/2025 NOTE: There is another version of this adapter, before you print this, check out… https://www.printables.com/model/448954-usb-c-65w-charger-compatible-with-ryobi-18v This printable adapter allows dual (or single) Ryobi…
This is the replacement drive blank that fits most HP business desktops, but specifically was printed for the Z240 Tower Workstation Original HP part has the following on the bottom... CAV 12 CH2 P/N 166775-006 BASE TERLURAN GP-22 >ABS<…
I needed more space on my pantry shelves, thus this tuna can mount next-to-the-door was created. No supports, requires 4 screws (and anchors) for wall mounting.
These bag clips by neoyarus are fantastic, but I needed a longer version. This is it, now supporting a bag that is less than 25.1cm (or 251mm) between the ends.
Please see version 2 (which uses a threaded rod between the base and handle for increased strength/durability) - https://www.printables.com/model/573501-dual-xbox-controller-carrying-handle-threaded-rod This allows you to carry two…
Needed a way to hold two USB extension cables… One is from the printer's memory stick slot, the other is from the computer. I don't like plugging the USB stick in and out of the printer directly (so as not to wear out the port) it's much…
This is a cheat block, to be glued in, that helps support the neck/head assembly if it turns out too heavy.
This is version 2 ... improved print time with less plastic also makes it brighter! I love LEDs so I made a really big one for my desk. Using a Pixelblaze controller it can be controlled over WiFi to turn on/off/dim and change the color,…
Target has been selling a Minifigure Astronaut Plush here: https://www.target.com/p/lego-174-collection-x-target-minifigure-astronaut-plush-blue/-/A-82717998 Here are some scaled items that your space man can hold. Requires super-glue to…
This is a directional shield that clips onto the Ryobi P796 LED Light The light is great, but sometimes when working on a car, or camping, you want the light directed away from you and not in your eyes. Suggested you print this in PETG if…
This fully printable and traffic light stands over 31" tall when assembled. Besides the printed parts, to complete the build you will need... Grey Carlton PVC outdoor conduit, 18" long (as the stick of the traffic light) Pixelblaze (for…
Easily mount two 18v batteries to any surface, in any direction (wall, under shelf, etc.) Use Qty.4 of M4*8mm Cap head screw to secure the two parts together PETG suggested for strength and heat resistance. Pictured using OVERTURE PETG…
This is based on Two-Gang Light Switch Plate for Philips Hue Remote by viettamluu June 06, 2018 https://www.thingiverse.com/thing:2948880 However... this version mounts over a single gang wall box, instead of a two-gang wall box. Designed…
The eufyMake E1 UV Printer complains it can't complete the snapshot if the item is too tall - but there is an empty space under that print bed, which now the baseball can sit in, and it's no longer too tall
These were made from a 3D scan of an actual board for a perfect fit, the outer face prints flat on the print bed for optimal adhesion. Sadly, these do not fit on the MK4 or CORE One print bed, even individually, even at an angle, you will…
A simple mount to keep your Ryobi drill or drive packs under a shelf. Use two business cards as a spacer between one mount and the Ryobi pack to get the spacing right before screwing into your shelf.
Needed a way to keep in angled on my work bench. Option for holding the Power Pole connectors behind the meter. Use two M3 x 6mm screws to fix the parts together, or I suppose you could super glue it. Printed with Matte Black PETG The…
This is my take on a stained glass thing you can put in your window. Some other silly people are charging for "their" design files of this... Mine is better because a) it's free and b) to prevent the epoxy from leaking out between the…
I needed a way to protect outdoor vents from things getting inserted, I was worried about kids bouncy balls or a water hose, but perhaps more practically this protects from mice or tree berries. After purchasing some stainless steel…
Holds your Ryobi 4v batteries, or USB Lithium batteries, or Milwaukee INKZALL Large markers to a Link rail Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern…
Options for voltage identification: 3, 4, 5, 7.5, 8, 9, 10, 12, 15, 18, 19, 24, 48, 52 …or… AC, DC …or… BLANK You can also print in different colors to identify different adapters All .stl are now revision 2, which makes it fit even if…
These are parts to connect another inline fan to 2" PVC for venting the SL1S printer. Connection should look like this… SL1S printer > Fan mounting backplate for SL1S into… "SL1S fan gate adapter.stl" ( see files section ) into… a 2" flex…
Replace your umbrella holder(s) with cup holders instead Big enough for your modern tumbler, 4" circular opening, 5" deep Drainage holes allow for condensation or spillage Simply mirror the model to make the Right Side cup holder PETG…
Watt meter mount with screw holes Angled desk mount here: https://www.printables.com/model/560169-dc-watt-meter-desk-mount/files Din rail mount here: https://www.printables.com/model/357461-din-rail-mount
Simple holder for a dry eraser and 3 pens. Option for magnetic mounting (push in qty.4 of 8x3mm magnets in the back) or screw mounting. Also see: https://www.printables.com/model/1161292-whiteboard-magnetic-card-holder
Car holder for the OneWheel GT S-series Rally XL Had to design a new variant since this board has curved rails. Triangle/arrow on the inner circle lets you know which way is up (top) of your board. Updated design 09-21-2026 is wider to…
Holds your Ryobi glue gun to a Link rail Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% - Infill pattern Grid - 3 Perimeters - Supports required If the cleat does not sit…
The PiKVM v3 hat with metal case is really cool, but I needed a way to keep it off my workbench. This bracket allows the PiKVM to slip in and still have all the ports accessible. Plugging in one cable on the left and right inevitably…
Mount your Ryobi batteries to Metro shelving …commonly found at Costco, SamsClub, HomeDepot, ContainerStore Must use two cable ties per mount to keep it snug on the post Suggested print settings: - 0.20mm QUALITY - PETG (pictured using…
Utilize a USB extension to save the built-in USB port from wear and tear. Two cable ties needed to keep the port secure, while still allowing for future removal in case the cable needs to be swapped out. Replaces the right side LCD mount.…
I needed this battery adapter so I could charge other 18650s individually, although they were part of a bigger pack I didn't want to disassemble. So I put this fake battery in the charger, and then wire the leads to a specific battery in…
Holds any combination of … - Ryobi 4v batteries - Ryobi USB Lithium batteries - Milwaukee INKZALL Large markers … or (with adapter) … - Ryobi quick change hobby knife - Sharpie ultra fine retractable marker - Ryobi fine point permanent…
The door trim makes the sensor body too far away from the actual door, so the solution is to put this spacer under the magnet which mounts to the door. Designed to match the same shape as the HomeSeer HS-DS100+ Z-Wave Door / Window Sensor…
Use your Ryobi TEK4 (AP4001) or USB Lithium (FVB01) batteries as a USB power bank and emergency flashlight. This is based off Simple3D's design but modified to accept the older TEK4 batteries too, and adjusted the cover to hold the button…
Mount your Axis P12 series camera anywhere you need it… Under a shelf, inside the 3D printer enclosure, etc. Requires a single M3 screw and optional 12mm magnets Suggest printing in PETG
Easily mount your LaMetric time under a shelf with this bracket.
Sometimes you want a door to look locked without actually being locked. Useful with those electronic keypad locks but you don't actually want them locking the door because you'll be right back, or you want someone to use the door without…
Needed a way to get several light towers (indicating 3D printer needs attention, or job done) back to the server room. Spare Ethernet lines already exist by every machine, so why not use that to carry the 12v to the light towers? Based on…
Perfect for the beach, couch, workbench, etc. This “cup holder” protects your Truly (or other tall-can beverage) from spilling and ruining your day. Don't have a 3D printer? Order already printed from:…
Holds … - Ryobi 4v batteries - Ryobi USB Lithium batteries - Milwaukee INKZALL Large markers … or in the middle … - Ryobi quick change hobby knife - Sharpie ultra fine retractable marker - Ryobi fine point permanent marker Optionally…
For the new profile Trex boards (and possibly others) this template helps you mark for the correct screw or pre-drill location I used PETG since this is going to be left in the hot sun and I don't want it to warp Also included are some…
A series of parts I printed to supplement my enclosure… “Axis M1065 mount” - an adjustable height and single-screw mount for the IP camera watching the printer “Axis P1224-E mount” - an adjustable height and single-screw mount for the…
Compatible with Zooz 700 Series Z-Wave Plus Open/Close Sensor ZSE41 for Door, Window, and Gate Monitoring …instead of using the double-stick tape to mount it, this mount requires two screws, and allows the sensor body to be slid up or the…
Holds your Ryobi P796 Compact Area Light light to a Link rail. Mounts with LED light up or down, with battery or without. Perfect for storage or when you need more light on your workbench. Suggested print settings: - 0.20mm QUALITY - PETG…
These wall mounts allow for skateboard mounting on any wall Option for LED backlight (3-pack was available at Costco) to use as backlight/indirect lighting, these can be activated by motion or remote control and are USB-C rechargeable Use…
Apparently the 3 pins on the charger port are only held in place by some white caulk, as many have experienced these pins can get pushed back such that the board doesn't charge, as they no longer mate with the charger plug. 1) clean out…
A traditional UPS is rather inefficient (12 or 24VDC battery string, stepped up to 120VAC, just to go back down to 24VDC to run the printer) and doesn't provide enough runtime during a power failure. I already have allot of extra tool…
Replacement in case you break the tab off like I did Designed for: https://shop.homeseer.com/products/z-wave-door-window-sensor HomeSeer HS-DS100+ Z-Wave Door / Window Sensor
This is a snap-on cover for the QuinLED-Dig-Uno board. Covers all the status LEDs on the board even with the Ethernet board attached, allows for the wireless antenna to exit, as well as all the wires. Suggest printing on it's side, with…
I needed a way to hold my phone instead of leaving it on the countertop where it inevitably gets knocked off or left behind. A notch left in the bottom of the phone holder allows the charger to stay plugged in. Some versions have a raised…
Made these parts to fill the holes in my 2020 Highlander after removing the Qi charger from the center console. R part (passenger side) is for the hole left by the spring shaft thing after prying/twisting it out, this covers the damage…
This remote has a tendency to loose it's battery door when dropped and doesn't sit flat on a table such that you can press the buttons without picking it up. This press-fit design (with optional magnets to keep the remote at the side of…
I am venting my printer directly outside, so I did not want the charcoal filter impeding airflow. This plate holds the 60mm fan alone (you need to use your own screws) I then have another attachment that allows for a 2" flexible tube to…
Made this clip so the radio could be stored on the side of the wire shelving unit Print on it's side for no supports. Print with PETG at least 30% infill for strength.
Gas pipe flanges are useful when making lamps or table legs, but the flange may have grease or sharp edges that can damage floors or furniture. This plastic part snaps into the pipe flange holes and provides a smooth bottom finish so you…
This allows you to carry two controllers and spare batteries wherever you need. Print with PETG for strength. Prusament PETG Neon Green Transparent is pictured. Use aprox. 135mm (or 5 and 5/16 in) of 1/4in threaded rod and screw directly…
