Counting matching models…
Scraper for removing old silicone. The front cutting angle is 30°, the rear one is 20°. Being made of plastic, the tip may bend, but you can still continue to use it by tilting it further. If you have ideas for a remix or to improve it,…
Instructions in English, translated with the assistance of ChatGPT. This Lockable Contour Gauge stands out from other models due to its larger size and can be entirely made of PLA. It features a robust locking system and is divided into…
3D model adapter for asthma spray, for use on a cat. The printed mask fits into the Ventolin device, and fits a medium-sized cat's face. Width and height around 4 cm. The dimensions of the spray nozzle are 21.5 mm by 15.5 mm Print without…
Parametric version of the hair clipper attachments. This model allows you to modify the heigh, width, length, number of teeth, making it compatible with various brands of hair clipper. The measurements indicated in the 3D model are…
Electric wheelchair handle grip. Outer diameter 43 mm, inner diameter for pin attachment 6.3 mm. The 3D model file is parametric, modify it as you wish.
Fastening Clip for Ford Transit MK3 (Up to 1991) – Universal Use This model represents a fastening clip/retaining rivet, primarily designed for the Ford Transit MK3 (up to 1991) and used for the upper plastic near the windshield. However,…
These are replacement blades for the back shaver. I have tested them and they do not scratch, but it is important to be careful because the bond between the two glued parts depends on the glue used and exposure to hot water in the shower.…
EN My cat Lilly was scared and resistant to using the asthma mask with the spray printed here , so I created an adapter to fit onto a bottle to create a chamber where the cat can breathe the spray longer and without being scared by the…
Cap for Kymco Agility 125 scooter. There are two versions in f3d and 3mf file: the one with the cuts was designed for interlocking, but in my tests, it wasn't wide enough. Nevertheless, it remains stable in position, but for those who…
This model was printed in PLA with a layer height of 0.2 mm, a 0.4 mm nozzle, 40% infill, no supports, and no brim. My "Mold Box" model stands out from others currently available online because it allows for the creation of a double mold…
EN Bayonet mechanism repair insert for type 6001 filters (see photo) for gas/powder masks. If the filter no longer attaches to the mask, print this model and attach it to the filter with two-component glue. ITA Inserto per riparare il…
Lost that tiny but crucial plastic latch that keeps your Philips shaver closed? No worries! This 3D-printed part is a quick fix to lock the shaver and keep it functional. This is a working prototype , so further testing and refinements…
Nails on a chalkboard Sound! https://recorder.google.com/e683131f-b969-445c-8522-bc0679318f25 The new STD meme sound: https://mega.nz/file/IuEV3CLS#QVvz2wZjSH-fp4iHWwJwpm4N7nWaDPeZyDpsT-8-M9I Description Translated into English with the…
I purchased the Btcino Living box along with the Btcino Matix sockets, but unfortunately they turned out to be incompatible. Have you also experienced this situation? The wires behind the sockets get crushed and fail to hold the sockets…
Reinforced Version This is the reinforced version of the headlight mounting clips for the Ford Transit MK3 (up to 1991). You can find the original model here: […
The mounting clips for each headlight of the Ford Transit MK3 (up to 1991) consist of three pieces: two upper clips and one angled lower clip. The angled clip allows for some movement to adjust the headlight screws. Since these clips are…
Matching the photo, this plastic component serves as a connection between the footrest and wheelchair frame. Two models are available: one complete and one modular in two parts, reducing the need for supports (you need to split it in the…
This model provides a versatile and parametric keyhole wall-mount system, inspired by device like Friztz!Box or many ONT/ONU units. The download includes tho separate models: Single Male Hook (Parametric & Reinforced) Designed to be…
EN This is an additional thickness for the BTcino Magic fruit holder support, designed for round boxes. It allows connection with concealed cables passing under the socket, thus enabling the addition of an extra socket in another area of…
These dashboard light covers were designed for the Ford Transit MK3 but are also compatible with other Ford models from the same era. Over time, the original plastic covers tend to crumblem making it difficult to property illuminate the…
This is a support bracket for a wardrobe hanging rod. It might be compatible with some IKEA models, but I am non certain. Check the images to verify if this support matches your needs before downloading. The bracket is designed for a rod…
Pin for Fastening Clips – Ford Transit MK3 (Up to 1991) – Universal Use This model represents a pin designed for fastening clips, modeled after the original part used on the Ford Transit MK3 (up to 1991) . It is specifically designed to…
This wall mount uses a keyhole-style locking system, designed to ensure a firm and secure hold. For extra safety, I've added two optional panels (bottom and side) that help prevent the router from sliding out in case the clip breaks. In…
Kingsong KS18XL mudguard locking system, replacing the original metal one that broke and bent. The original product can be found here: https://www.overwheel.it/prodotto/ks18l-18xl-parafango/ The 3D model refers to the metal plate with…
This is the ring for the Glem oven knob. I recommend printing it in PetG instead of PLA to ensure higher heat and combustion resistance. It should be printed with active supports.
Tool to Replicate Original Sheet Metal Folds for Camper. Thanks to these folds, I could glue aluminum patches onto the oxidized, perforated sheet metal, maintaining the original design for better adhesion and reduced repair thickness.…
Replica of the original screw for the "JOB" beach wheelchair for disabled individuals. It also includes a tool for screwing and unscrewing, thus avoiding the use of screwdrivers, knives, or other harmful tools. Additionally, there is a…
I have created a small trowel designed to ensure a precise distance between the bottom of the tile and the surface of the plaster (eg https://www.pinterest.it/pin/21532904457891450/ ). This tool ensures a uniform and leveled plaster…
EN This bracket is designed to allow the fruit box to be mounted without the use of screws. It's perfect for situations where you need to mount the box on a wall or furniture and easily remove it without disconnecting the electrical…
Luxens 20 ml Dropper Cap for Dye Diameter: 17.5 mm Height: 12 mm Thread Pitch: 3 mm There are two versions, with snap-on or screw-on cap. Follow the instructions from link for printing.
These 3D stickers accurately reproduce the fuel pump and water temperature symbols found on the Ford Transit MK3 instrument cluster. Over time, the original dashboard paint deteriorates and crumbles. After repating with spray paint, I…
🖱 Scroll Wheel Replacement for Anker Mouse – Test & Improve The tiny plastic pin of the original scroll wheel broke, rendering my Anker mouse unusable despite being otherwise in perfect condition. So, I modeled a replacement in Fusion 360…
This model was designed specifically for my case, so its height might not be perfect for everyone. If you're lucky, it will match your desk height, but if you need to adjust it, I've included the Fusion 360 file so you can make…
If your Wurth flashlight no longer keeps the light on with the original button, this DIY solution allows you to fix it easily and effectively. I designed a switch holder, consisting of two pieces, that allows you to secure an alternative…
This is a plastic support bar designed for a specific shopping trolley model. It sits underneath the trolley structure and acts as a resting point when the trolley is placed on the ground. Without this part, the trolley would rest…
On many shopping trolleys, especially after carrying heavy loads, the original supports that keep the axle rods in place can break or go missing. When that happens, the frame loses stability and the structure may tilt or misalign, making…
These are all currently available results.
