Counting matching models…
Modular Picture Frame Kit Update 03/06/2026 The metric frame parts 120mm up to 180mm angles were wrong. They were 44.13 degrees and should obviously have been 45 degree cuts for the corners. Thanks to Frey4cre for pointing this out. These…
3D Printed Dremel Lathe Precision lathe for most Dremel models intended for fine hobby work (dolls house spindles, model locomotive funnels, wargames canon barrels, etc). Only tested with a Model 800 but should work with any Dremel with…
Convenient and space-saving holders to support pan lids inside a kitchen cupboard door. Attaches with a screw (or double-sided tape if you don't want to drill holes in your cupboard doors). These have been designed specifically for my Le…
Simple house and hotel for Monopoly. To replace all the pieces you'll need 32 houses and 12 hotels. Material: PLA, PTEG, etc Layer height: 0.1 mm Infill: 10% or less Supports and brim: None
Rolex Back Remover Tool Works on my 32 mm Oyster Datejust Perpetual but not on any other sizes or styles unless you scale it up. No guarantees as the inside serration may not lock onto your watch backs' serrations. Normally you would use…
Gimbal Convertor for DJI Mini 2 Converts your drone into a 4K hand held stabilizer. This project came about as I needed 4K footage with a camera on a Steadicam which is heavy, cumbersome and requires a LOT of practice. The alternative was…
Simplest Ever Filament Joiner Ever (Ever) NEW AND IMPROVED Update 04-11-2022: No screws and now no cable-ties required. Many thanks to jcjames_13009 for suggesting his ‘hollow squares’. These are now part of the print with grips on the…
Wargame Ships – Ship of the Line Printer: Prusa Mk3s Material: PLA, PTEG, etc Layer Height: 0.15 mm Infill: 15% Supports: Yes, on tips of sails and bowsprit Brim: None 100-gun Ship of the Line Circa 1812 Not to any particular scale. About…
Extended legs for the DJI Mini 2 for taking off/landing on long grass, etc. Remixed from the lightweight skid design at https://www.thingiverse.com/thing:4750938 Printed with PTEG 10% infill to reduce weight
Same as original remix but for spools with thicker walls (thanks to WhatWouldAnEngineerDo for pointing out that cardboard spools are a bit thicker). The first remix is at:…
Wargame Ships - Frigate Printer: Prusa Mk3s Material: PLA, PTEG, etc Layer Height: 0.15 mm Infill: 15% Supports: Yes, on tips of sails and bowsprit Brim: None 20-24 -gun Frigate Circa 1812 Not to any particular scale. About 40 mm form…
Updated compact version from: https://www.printables.com/model/194761-cupboard-door-pan-lid-holder …with a concealing cap (to be super-glued on) to hide the screws.
Egg Lathe For painting eggs. Not for turning them! See also 'Egg Lathe UPDATE' for alternative parts that replace the gears for a smoother rotation at https://www.prusaprinters.org/prints/153374-egg-lathe-update NOTE: Now includes STL…
Wargame Ships - Sloop Printer: Prusa Mk3s Material: PLA, PTEG, etc Layer Height: 0.15 mm Infill: 15% Supports: Yes, on tips of sails and bowsprit Brim: None 16-18 -gun Sloop Circa 1812 Not to any particular scale. About 25 mm form…
Nikon D500 Full Rig Update 09-08-2025 Oops - omitted handle_bracket.stl Now added. REQUIRED: PRINTABLE : 1 x 15mm_spacer_long 1 x 15mm_spacer_medium 1 x 15mm_spacer_short 1 x cage_base 1 x cage_left_side 1 x cage_right_side 1 x cage_top 2…
Plasticard Strip Cutter Filament: PLA Layer height: 0.15 mm Infill: 15% Supports under the block and under all nut gaps on the print plate Brim only required around the blade_cover By the way the 5H 48m time quoted above is for all the…
Wingnuts for M3 and M4 screws. The M3 Wingnut is just scaled down to 79% from the M4 Wingnut. Nice easy print. Print with the flat face on the print bed. Tap in the appropriate nut. PTEG probably best - PLA might crack when you tap the…
I've tried the ball & socket style of helping hands (3D printed from this Prusa catalogue and Thingiverse) but found they bear little weight and got very loose very quickly with no way to tighten them bar a complete re-print so… Requires…
Iwata Eclipse HP-CS Nozzle Driver For unscrewing or screwing the nozzle cap from an Iwata HP-CS airbrush but it should fit many other airbrushes (not tested). The Driver can also be left on the airbrush as a dust cover. The odd thing…
Hex Driver Bit Holder I designed this for attaching/removing camera quick-release plates. Keep it on a lanyard round my neck rather than searching through a camera bag or pockets for a bulkier screwdriver. Or you could tie it to a tripod…
Nikon D500 Full Cage Required for cage: 4 x M3 screws 1 x ¼” Screw(for camera) Required for rig accessories: ¼” UNC nuts (up to 9) Required for the handle: 4 x M6 nuts 2 x M6 15 mm threaded rod -OR- 2 x M6 nuts 2 x M6 10 mm bolts Other:…
Hex Key Compact hex driver with magnet to hold hex bit. Nearly the same as the original but a bit smoother with a space to insert a 6 x 2 mm magnet (easily sourced on Amazon or Ebay). If you print this version without the magnet the hex…
This is a completely new version of my original design (here: https://www.printables.com/model/145632-dslr-rig ) without the cage and with fewer parts. Redesigned in SOLIDWORKS for higher precision. UPDATE (19/04/2023): Uploaded .STEP…
Remixed to fit a 2.8mm bamboo skewer and removed 2 of the arms. Used Ligntwave 3D to cannibalise this in a few minutes. Printed 3 at a time using Sunlu white PETG in about 10 mins.
Iwata Cup Cap A cup cap for an IWATA airbrush. I bought my Iwata airbrush with a large-capacity cup and used an angle-grinder to cut it down to the size I preferred (mad, I know). That meant that the cup cover didn't fit so I designed…
FeelWorld FW568 5.5 inch Field Monitor Shade No screws, sticky stuff, etc, except for double-sided tape (or general-purpose glue) to stick some black felt to the inside of the shade to kill reflections. Alternatively paint the inside of…
I noticed how very ergonomic my Ryobi cordless drill was and adjusted the camera grip to accommodate 2-finger grips and straighter lines for the other fingers. Right enough - it's much more ergonomic. Those guys at Ryobi got it right.…
*UPDATED APRIL 2026 * V 05 Same basic design but with a spring-loaded locking retainer for the blade. Two-piece design. Just superglue the back end of the spring into the top of the handle (locate the peg on the spring into the hole in…
Simple cage for fat balls with a ring for the birds to grip. Inner diameter is about 56 mm but you could scale it up for larger balls (I make my own so this size is OK for me). There's a lid to stop birds from getting trapped inside and…
Although the summary says “Quick and easy picture framing” these clamps can be used for any right angle cornered woodworking job. Cut the mitres (or butt joints), apply the glue and place the clamps at the corners. Tighten the string and…
DSLR Baseplate and Grip (Ergo Version). Not a remix as such but a redesign with a stronger baseplate (without the hassle of a metal bar) and an ergonomic handle. This gives you a better balance when there's a flash on the camera…
Holds 4 rulers plus your callipers. Screws onto a flat vertical surface. A not-very-elegant SolidWorks file is included for tinkering… Regards, Paul.
Plank bender for wooden model ship builders which cost at least £20 online. The blade is a blunted rectangle of aluminium 25 x 7mm (0.96mm thick) from a piece I had lying around. For those who have never come across one of these it's used…
DSLR Baseplate and Grip I designed this for my Nikon D500 but it should fit any DSLR. Just be aware of the battery door position and the distance between the camera's tripod screw and the handle. There's an imbedded 100 x 5.5 x 5.5mm…
Tiny clamp for modellers Two identical parts per clamp plus a length of rubber band. Clamp the parts together in a vice (just makes it easier to…) and tie a cut rubber band round the notches (as per the photo). A tiny drop of superglue…
Swinging Desk Phone Holder NB: The desk doesn’t swing. And it’s not a swingin’ 60’s retro thing, either. It accommodates a phone up to 72 mm wide and 10 mm thick. Scale to fit a smaller or bigger phone and use appropriately sized screws.…
For years I've carried a US Quarter Dollar as it fits every tripod plate thumbscrew. Finally got round to making a nifty holder thingy for it. And, hey - it kinda looks like a tiny camera! A Quarter Dollar coin snaps into it perfectly if…
Emergency seatbelt cutter with convenient snap-in shopping trolley coin (GBP £1 or Euro) holder for your car keyring. Most credit goes to Justin for his great seatbelt cutter design which you can find at:…
Simple clamp that fits a pretty standard 2" nail. I filed the nails roughly with a diamond file to increase their grip but that shouldn't be necessary. The nail diameter must be 2.6 - 2.65mm. Just force the nail through one clamp piece…
PLA or PTEG Layer height: 0.2 mm Infill: 20% Supports: None Brim: None Printed on Prusa Mk3S Just print as many as you need and snap ‘em together.
Based on Japato110's design I added a support leg that clips over the top of the Z bearing part, otherwise the original dampeners tended to move down. PETG at 15% with Organic supports and no brim. Only the overhang at the top needs…
Magnifier A small swing-to-open/close magnifier using a 20mm diameter lens (from a printer's loupe). Fairly self-explanatory. Push the magnifier glass handle onto the pivot on the top part and press on the bottom part. Fix the top/bottom…
Filament Labelling System A clip to prevent unravelling of partially used filament rolls that can also be used to record the amount left on the roll (metres or grams) . See IMPROVED VERSION at:…
Filament Labelling System 2 A clip to prevent unravelling of partially used filament rolls that can also be used to record the amount left on the roll (weight in grams) . Original version at:…
I found pulling the nozzle cap from the Harder & Steenbeck (Infinity or other similar style) airbrush a bit fiddly due to the high chrome finish so I designed this Puller. Operation is self-explanatory - just grab the Puller towards the…
Hole Bridging Workaround Sometimes you have to orient a model so you end up with holes running parallel to the print bed and this can result in your nice round holes not being so round at the top due to bridging. To remedy this, I cut out…
This fits the paint mixer as depicted in the photograph for 1, 2 or 3 bottles. They’re designed primarily for Vallejo bottles but most acrylic bottles will fit such as Game Color, Citabel, Scalecolor, etc. Darkstar metallics are a bit of…
These are all currently available results.
