Counting matching models…
In a nutshell, I had the idea, wanted to check if somebody did it already. Bingo, but far too loose CAD (~2.1mm). I think mistake in updload: nearly all users had similar issue but not the creator. So I've redone an editable model under…
My wife needed some can/bobbin for her sewing machine, so I made her some. Design in two parts. You will need 3 drops of glue. No support needed. Personally printed @0.07mm, in PLA+ udiamond for the low friction and wearing resistance.…
All pillar from 5568 kits broke I searched for 3D printed alternative. I found Crosslink's and add 30212873. Both are available in STL or editable Freecad (0.21) model. I tried to reproduce connectors without success for now. Feel free to…
Warning dovetail can break if slammed open. I quickly draw two patches to fix mine. I will update the full assembly with: increased area on junction different shape of junction (more open angle) As the original bracket had different…
To tune my recumbent stem, I adapted the mount to my bar. To do so I recreated the model in Freecad. Mod to come. editable removal of the snapping leap looser fit between body and clip back ring to maintain the clip in place once screwed…
See mod described below. I changed colors at 2.6mm. I used PLA, a 0.25mm nozzle and layer height of 0.15mm, 3 contours, 15% infill, no support. To open and lock I advise you to tilt two skull horizontally, smoother not crossing layers,…
Why? I designed this system of pod to isolate a bit my plants from the floor of our balcony (which can be too warm). At the same time I integrated water reserve in the middle sections, which you can fill by the top. when the first…
As I don't have the tools from Shimano or Enviolo and wanted one adjustable I made this one. 92 to 143mm usable. Should be easier to maintain good tension on cable and housing, while keeping more accurate distance and locking the cable…
Moule réalisé pour remplacer un modèle défaillant. Les photos correspondent pas à une version non publiée: un coté est plus long que l'autre. Le modèle publié est symétrique. A imprimer face plane contre le plateau. Supports fortement…
Modifications du raccord remixé afin d'éviter que le filament ne frotte contre le raccord et génère du bruit amplifié par le sécheur Sunlu. Décalage du stop du tube PTFE à 0.75mm de l'entrée filament. Comme cela quelque soit l'angle du…
The band of my 4GT watch was worn by time. I decided to repair it by printing a replacement one made of rest over TPU. I made only the part which was worn out. I included a hole for the axle handle, it is possible it breaks when inserting…
As I didn't have the same magnet but only 6x2mm one I recopied the shape and adapted it + some others mod. See below.
This is the split-able mold to produce the lower bracket of my high racer recumbent bike, which is a velomotion scopa. I printed all parts of the mold. (PETG, 0.1mm, some hours) Following steps are: clean a bit more artefact, wax steps…
I made this clip to maintain the cat net on my balcony at the bottom. The vertical bit passes through the mesh. Free to improve, tune to your need. Printed with 0.2mm layer, nozzle 0.4mm PETG.
My daughter came to me to print a shield according to dimension of a sample she did in cardboard. Here it is. As I have a Prusa mini+, I had to split it in 4. In the FreeCAD file you will see that part *2_of_4* and *4_of_4* are…
As I'm switching from end bar shifting on a U bar to flat bar shifting on a T bar on my recumbent, I designed this to still use my Shimano SL-BS79. Symmetrical. No need to disassemble the levers to adjust position. Should work also on…
As my daughter has a tendency to break apart the end of her handle and that they had no bearing I designed one. The thread of the adapter is tailored to fit the wooden part. You can change parameters in the FreeCAD file. I didn't uploaded…
For some given gouache painting. As I value them I designed this simple frame. It used 8 magnets. Parametric: width and height of both solid are linked by constraints in the first sketch by formula. The original model is tuned for a…
We are happy users of a bike43 long-tail but the rear bar isn't double, leaving child hands exposed, so I made these handle. They are composed of: handle (PETG) including 8 inserts M5 to fit in cap (PETG) TPU inserts They fit on my Prusa…
I designed this inferior bracket for my recumbent seat as the original one was a steel sheet and was a bit wobbly. To get this shape I used Calculix and Beso included in FREECAD and simplified the result. According to my calculation this…
My daughter lost her telescope's eye cover. She asked me to replace it. Here it is. Made of TPU. Vase mode. As usual you will find a Freecad model to fit your model. I made a symmetrical geometry for simplicity and ability to use the vase…
I designed this handlebar to replace my U bar to: - Gain some speed, fun and comfort on long distance - Reduce width, practical on packed cycle lane - Gain a bit of weight, always appreciable when climbing a hill, even if the actual…
As the space between rods of my rail isn't consistent I couldn't use models attached between two ‘easily’ I designed this simple planter using: the planter itself the collar 2 M3 inserts 2 M3*16 screws The planter is designed for 13mm…
See in modification. As original models you will need to sand parts to fit them together. At least it was my case with PETG-CF10.
As my previous model was too attractive it has been stolen after only one night outside. So I designed one with screws. Two version in the tree: 22.2mm and 28.6mm Free to you to copy a body and then modify to your need. I used TPU and M3…
This design is in one part and so use only: TPU for the body (has to be flexible to fit heat insert) 0.8 nozzle, 2 walls, 15% infill grid A CHC M3*20 screw A M3 washer A heat insert As this design is blind you have to twist the body on…
These are all currently available results.
