Counting matching models…
Use it, Spread it, Remix it! This 2040 Attachment covers the end of the extrusion. Print Settings Initial Layer Height: 0.15mm Layer Height: 0.2mm Line Width: 0.35mm Wall Thickness: 1mm Wall Line Count: 3 Infill: 10% Gyroid Print Settings…
Nerf Rival Knockout Demigod Hopper is a simple slide on attachment that adds 20 rounds to the simple single fire blaster. File included have two variations that allow Picatinny rail attachments to the sides and top. The M3 heat insert…
refer to photos on print orientation and also supports required. All other development will be halted on these files.
Secondary mag release extension for the XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU. Hardware Required: 2 - M3x10mm screws Print Orientation: Outer sides facing down.
Nerf Rival Challenger offers a new Rival Muzzle Lug. These muzzles press fit on and twist into place. Options are shown in photo: 1. Long Skinny SMG Crown (2" diameter (50mm) x 6.5" long (163mm)) 2. Short Skinny SMG Crown (2" diameter…
Simple M3 thumbscrew for battery enclosure. I used this M3x20 screw. https://www.mcmaster.com/91502A109/ Should print in place. The SLT file has the correct orientation. If you would like to change it up in Fusion I have attached the…
This is a drop in barrel replacement for your stock OEM Nerf Rival Knockout barrel. Normally some modifications are required to allow for hopper fed use if you use the stock barrel. This allows you to keep your OEM barrel unmodified! I…
Mega version of the Stapler. Flywheels are currently printed, but an alteration of the flywheel cage might allow Juno flywheels or another mfg flywheel. Step files attached.
Wanted a priming grip for the top of the X-shot Fury X. Print vertical. No Supports required. Uses M3x25 machine screws.
The GameFace Trion is an awesome blaster for the foam flinging community. With this upgrade it elevates it even further by extending the magazine release. Has both ambidextrous access. Included is: Magazine extension Requires M3 nut and…
A simple snap on magwell guide for the Spectrum by Adventure Force. Removal of the branding on each side is required before attaching the model. No support is required. Built in support should snap off with some slight force. Be careful…
Added a 120mm stand area for the transmitter of my RC Truggy.
The Dart Zone Outlaw is a very sleek and easy to use blaster. It could be a secondary blaster for a lot of play styles. The only limitation is the quantity of cylinders. I have designed a replacement for the stock cylinder so you can have…
Add a simple tray to your 2020 profiles. Other trays did not have the simple look I wanted and also the easy way to insert it into the profile. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill:…
Wanted to improve on the great print! Thanks for the inspiration Category: Hobby
Add a picatinny rail to your Crocs! Hardware: 2 x M3x8 Category: Hobby
**Update 5/23/25 - Corrected the MegaXL tray for the 240mm. Slots were too wide. Slots are now smaller than MegaXL diameter. Completed the elite and half dart sorting trays to allow for separation of these two foam dart types. **Update:…
This is the Nailer by PaperSkeletons3D and NotNuffNerf. We wanted a Gryphon that included a lot of the communities mods into one blaster and add our own twists to it also. The magwell is extended to fully hide a 10 round worker talon and…
This file uses a double sided drill bit. It is a snug fit so the part does not fall off. TPU was used to give it a flex and grip feel. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill:…
Use it, Spread it, Remix it! This 2020 Attachment adds 75mm tall legs. These legs allow me to get under my printer to keep my work space clean. Print with legs upside down. Print Settings Initial Layer Height: 0.15mm Layer Height: 0.2mm…
Wanted a replacement sleeper jam door for the XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU. This is a replacement drop in jam door replacement for the stock jam door. This adds an easier way to open the door and also gives you…
Make an pinball game out of your old Tic Tac container (US Version). I used ball bearings from an old skate bearing. There is also an included file that has balls that print in place. Just snip them apart and happy playing! The spring bar…
Important Note: Downloaded file(s) are for personal use. Do not resale. These are inserts for the Nerf Rival Pilot, Knockout, Forerunner, Takedown, and many other Rival blasters. It might bend the hop up tabs a bit on some blasters, but I…
Here is a different version of the MicroSD to USB Adapter Holder. I reduced the mass but increased the strength of the mounting points to reduce cracking of the filament. It should only take ~34mins if you have the infill below 10% and…
Blast three MegaXL darts at the same time. Here you go! No support required, but you might need a brim.
I only needed to hold the snippers and spatula. This model has a few options. You can print them individually if you only need one or the other. Two versions available V1 or Extended V1 2. Use the combined version and it should slide into…
Want to blast three mega foam darts at the same time? Here you go! No support required, but you might need a brim to keep it on your printer till the end depending on adhesion.
I required a more stable boot than the ones provided on here. It also uses straight pathways for the nylon bristle brushes. This allows easy swap out if they are damaged and also easy install in the beginning. Required: 8 - 0.125x3/16"…
Drop in replacement trigger for the original triggers. Also includes a rev delete. Includes photo of part orientation. No supports required for these parts. Includes CAD supports.
Best to print like the attached photo.
This is a print in place 9 dart chain. You will need 1/16" (14 gauge) wire for connecting the chains. No supports are required. Each set of 9 chains includes two built in supports that are easily removed. I have included a wire cutting…
Wanted to do an improved version of gibbles_fx " NERF BigShock Removable Barrel (Elite Dart and Rival HIR)" I added knurling to the barrel end and also made the tolerances fit better in the blaster. Two files attached. One is default and…
I did the removal of the original muzzle but was not happy with the solvent welds left over on the front of the blaster. I designed this part in Fusion360 and it came out great! The fit is snug and only required a bit of pressure to get…
PS3D improvements for The ROC. As I use it I might add more remixes!
Top grip for most picatinny rail blasters. Gives a larger grip area for adult hands. Print both sides with supports. I use 5 degree overhang support. Required 4-M3x10 to 12mm hex screws. Flush mounting for screws requires hex head to be…
Add an adjustable spring spacer to the Adventure Force Desperado. Adjustment range is ~5mm to 30mm. Minor shell modifications are required to use this. A 16mm hole needs to be made on the back of the blaster. The assembly of this spacer…
Wanted to cover the entire profile below the nozzle in it's home position. This could also be used to cover all your profiles for a cleaner look. May need to make it thinner for some areas. Just move it lower in the slicer to the…
Use it, Spread it, Remix it! This 2020 Attachment holds a Micro to SD Extension. Dimensions of extension: 2 x 0.4 x 0.4 inches (50.8 x 10.16 x 10.16mm) Amazon Link for Adapter in US The adapter sits halfway into the part to allow for the…
The Dart Zone Vulcanator is hands down the coolest dual magazine blaster in recent history. A downfall is the magazine wells impact design feature. It helps if you accidently clip into a doorway or snag a tree. This safety feature limits…
Dictator Drop in muzzle replacement and barrel extension collet. No support required.
Use it, Spread it, Remix it! This 2020 Attachment holds a Micro to SD Extension and 3 SD Cards. Dimensions of extension: 2 x 0.4 x 0.4 inches (50.8 x 10.16 x 10.16mm) Amazon Link for Adapter in US The adapter sits halfway into the part to…
Wanted to add slight improvements to an already awesome blaster. I have printed the original but had a few issues. Thankfully Chance offered the STEP files so I could easily help out and add these minor improvements. Let me know what you…
Replacement rev trigger with smoother edges. Keeps all of the safeguards from the original trigger. STEP file available for remixing.
Wanted to add a small 90 degree battery compartment for the new XSHOT Pro Motorized Piston Pump Toy Dart Blaster by ZURU Print the lid where the tabs are facing up. Print the battery case upside down with support for the screw only. I use…
Saw AntonFalck's design and wanted to add to it by lengthening the holder. I printed off a bunch of his version for Christmas Eve gifts and everyone loved them but wanted the ability to have both a Phillips head and Flat head together. I…
This is a concept mount for my Bebop 2. I will update this log once I have printed it to make sure this file works. Category: R/C Vehicles
Better version on Cults3D! https://cults3d.com/en/3d-model/game/dart-zone-vulcanator-magazine-brace-heavy-duty Brace for the magazines on the Dart Zone Vulcanator. Simple print to fix the issue of mags possibly falling off the blaster…
Foam dart stand for most of the available nerf foam darts. Assembly with adhesive is required.
******* Not for Commercial use ******* ******* Please contact if this is something you would like to sell ******* Add this infinitely expandable hopper to the top of your Knockout. Tubing Dimensions: Actual inside diameter (in.) = 1…
Complete swap out for the alternating pushers inside the Vulcanator. This mod requires no alteration from the original blaster (dremel, snipping). Just remove the gear and pin inside the pusher mechanism and the alternating engager. A…
*****WARNING***** This project is documented as best as possible. If you do not have electrical knowledge or do not feel confident following a wiring diagram please do not try. There will be alterations of UL certified electronics. This…
My NuTone Range has a vent cover that was not there so I pulled up the manual and replicated the best I could from the drawings. I used glue to hold it in place. This part creates a good seal so the air can go up the vent. Print Settings…
Wanted to add a few attachments to the magazine adapter. Required M3 Heat inserts and M3x10mm screws. Category: Hobby
Use it, Spread it, Remix it! This 2020 Attachment holds 3 SD Cards. You will need two M5x10 button head screws Amazon Link for screws in US and two Amazon Link for nuts in US The SD cards sits halfway into the part to allow for easy…
Multiple stand bases for different displays I used to sell. Circular 240mm was designed for a customer who wanted to display 3 Diana's. The Dual blaster stand was originally designed for a customer to display 2 BK-S1's. The standard stand…
I wanted a more secure lock for the magazine door. This requires an additional hook magnet and also a 625ZZ ball bearing or other magnet surface. Amazon link for the ball bearings:…
Looking for a print in place version of other tactical clips for extra darts? Here you go! I went ahead and added my own supports that snap off easily when done printing. Some slight sanding might be needed if you want it really smooth on…
Magnetic door latch that works with this door: https://www.thingiverse.com/thing:2615653 Required parts: 1 x 14x5mm magnet 2 x M3-0.5x10 screws Print the part and add the magnet. Float it around until you find the spot where the strength…
Needed a handle to open the door for this https://www.thingiverse.com/thing:2615653 print. Used M6 screws and nuts. The opening for the nuts might be tight. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 3 Rafts: No Supports:…
I needed a container to hold my screwdriver set in my bag. The interchangeable heads kept getting lost. I lengthened the container to hold my personal set. You can remix this to any length you need. Make sure you only lengthen the bottom.…
Made this muzzle awhile ago for the X-Fury.
The Brushless Nailer is a variant of the Nailer but uses two or four 1503 brushless motors. BOM List: 1 x TTGO ESP32 microcontroller with 1.14 Inch LCD Display and USB C port. 1 x 4in1 ESC 3-6S with BL_S firmware or similar. 1000 uF…
Added protection for your Wowstick F1+. These caps are useful to smooth over the sharp edges along the rim of the aluminum body. It also protects the micro USB port on the end cap! Update 1: I have added a grooved version for all parts so…
Wanted to try and make this a print in place piece to eliminate the need for glue or fire! No support or bed adhesion aids required. This was a way for me to practice print in place parts and it came out nice! Happy printing. Print…
Swinging targets for foam blasters. Requires: 15 - M3x6mm - Aluminum disc frames 10 - M3x14mm - Disc frames to braces 18 - M3x10mm - Brace mounting, Frame connection, feet You will need 5 Aluminum Discs, 3" (80mm) Diameter 24 Gauge…
Print vertical and one half at a time for better layer resolution and minimizing stringing if printed on FDM. Not tested. More updates to come.
Knockout Rival Magazine Adapter that uses two ball detents. Dimensions for the ball detents should be 6mm diameter and 7mm length. Press fit into the insides of the part. It is a bit of a pain, but once in they will not come out.
Requires adding two blade wire connections for interfacing with the DeWalt battery. Do not proceed unless you are aware of the hazards of crossing the pins for the battery to a PWM. PWM also has capacitors that can store a lot of power.…
Attach a drain cleaner to you blaster. I recommend purchasing an electric toilet plunger like the one in the photo. This drain cleaner can handle a single Captain Xavier demolisher rocket. It also supports a Silly shell adapter.
I include various sizes for the BlueAnt Soundblade Under-Monitor Soundbar. You might only need 4 risers for the outside legs. This goes over and inside the legs on the soundbar. Photo shows 30mm riser. I have included the step files for…
Crazy hopper for a knockout that can hold a lot of rounds.
Using two M3x5mm screws to hold the base mounts to your Crocs. Requires printing the TPU parts separate and then pausing your print to insert them into the base part. Once finished you have a multi-material part that lines your Jibbitz up…
Logitech MX Keyboard Adaptive Zen Garden Intro This 3D-printed desktop Zen garden is a modern, compact reimagining of the traditional Japanese karesansui (dry landscape) garden, designed specifically to magnetically attach to the back of…
Cleat mounting cable magnetic organizer to hide the 3M attachments. Cleat tolerances might be tight enough to not require screw securing. If not, I use 3x5mm flush screws. Printing the cable organizers with a flexible filament would be…
Uses four marbles as the wheels. Requires glue to attach the pieces. Use connection pins to attach the top pieces while gluing.
Required M3 heat inserts and M3 hardware.
These are all currently available results.
