P
PrintablesRCHeliGuy
Racing Glove Holder
Holds Kart Racing gloves on a profile rig. Fits 40 series 120mm uprights on a profile rig. Uses a single M8x16 bolt to attach Has a rib that fit in the 40 series slot.
- Downloads
- 1,126
- Likes
- 149
- Rating
- 4.8
All models
Counting matching models…
P
PrintablesRCHeliGuy
Cup Holder ( Sim Racing God )
This has a bit of attitude. I'm not sure I could even using this ironically for myself, but for the serious sim racers among you this may be more appropriate. This has the same dimensions as my other 32 oz Camelbak cup holder. It has 8mm…
- Downloads
- 929
- Likes
- 119
- Rating
- 5
P
PrintablesRCHeliGuy
Sim Knobs 45x23mm for CTS288 rotaries
For use with CTS 288 Rotary knobs with and without button press. The Rotary knobs with button press are MUCH more durable than those without. The spindle for the rotary knobs with button press are .5mm taller and coincidently have a .5mm…
- Downloads
- 398
- Likes
- 88
- Rating
- 0
P
PrintablesRCHeliGuy
StreamDeck XL M8 mount for Profile
This is a magnetic mount for the StreamDeck XL that fits the StreamDeck like the included factory mount. It uses two M8 bevel head bolts to mount it. There is a hole for the USB port in the center. There are holes for 5x2mm neodymium…
- Downloads
- 279
- Likes
- 35
- Rating
- 4.67
P
PrintablesRCHeliGuy
USB plug holder with M5 hole
I have a single USB plug connecting my Sim Rig's 10port USB 3.1 Hub to my computer and I wanted a secure way to hold it when I'm rolling my rig around. It uses an M5 Socket head bolt to a T-nut Print instructions Prusament PLA Pearl Mouse…
- Downloads
- 228
- Likes
- 49
- Rating
- 5
P
PrintablesRCHeliGuy
SC2 Emergency Button Box Enclosure
SC2 Emergency Switch Enclosure. This is not to be used by anyone who can not reassemble the switch properly and safely. This replaces the stock enclosure that came with my SC2 Pro. It takes 4 x M6x16mm bolts to mount to the profile…
- Downloads
- 225
- Likes
- 45
- Rating
- 5
P
PrintablesRCHeliGuy
Button Box System for SimLab Vertical mount
1/12/2021 Added a Replay Binnacle V4 that is 2mm taller to accommodate 2 additional buttons and added 5mm holes for magnets for them. Added Stop Replay and Slow Motion Labels in my button box label project. 1/12/2021 Updated the…
- Downloads
- 201
- Likes
- 80
- Rating
- 0
P
PrintablesRCHeliGuy
Neutrik 2,4 Pole mount
This Neutrik receiver mount will fit the 2 and 4 pole Neutrik recievers. I use it as interconnects for speaker wire for the transducers on my rig. It uses 1 M8x16 bevel head bolts like these to mount to 40 series profile…
- Downloads
- 187
- Likes
- 26
- Rating
- 5
P
PrintablesRCHeliGuy
Simracing Twin Dual exhausts ( Cosmetic )
Print two of these for the back of a profile Sim Rig. It has two M8 holes in the center of each tail pipe to bolt up to the profile with. Print instructions Using Jet Black and then switching over to Pearl Mouse.
- Downloads
- 146
- Likes
- 40
- Rating
- 5
P
PrintablesRCHeliGuy
Heusinkveld Smart Control Mount
Edit: 8/21/2022 Added USB plug support with zip tie slots. I wanted to secure the HE smart control to the back of my inverted pedal deck and the bolt pattern on the Smart control does not match 40 series profile, so I made this. It has…
- Downloads
- 124
- Likes
- 9
- Rating
- 0
P
PrintablesRCHeliGuy
Magnetic Labels for Button Box
1/12/21 Added 2 new labels. 1/11/21 Added 8 new labels. 1/9/21 Added 6 new labels. 1/4/21 Initial 14 labels These labels use 5x2mm Neodymium magnets like these. N52 N50 Round Disc Neodymium Magnets https://www.ebay.com/itm/183326142804…
- Downloads
- 99
- Likes
- 43
- Rating
- 0
P
PrintablesRCHeliGuy
Velcro Clip M5 bevel, 40 series profile
This is a Velcro strap clip for 40 series profile. It uses an M5 bevel head bolt and is sized to fit the slot of 40 series profile. It has a single orientation. It fits the 20mm wide velcro straps I have and the M5 bevel headed bolts and…
- Downloads
- 79
- Likes
- 25
- Rating
- 5
P
PrintablesRCHeliGuy
Profile mount for Virpil CM2 base
This allows mounting a Virpil Mongoose CM2 base to a piece of upright 40x40 profile. The profile is offset enough to connect the 5 pin din connector, but not the AUX connector which is directly behind the profile. There is also a USB…
- Downloads
- 65
- Likes
- 13
- Rating
- 0
P
PrintablesRCHeliGuy
Virpil Collective Stick Counter Weight
This is a combination collective counterweight and cable strain relief. It uses the 500g weight from this pack. https://www.amazon.com/gp/product/B01IP7G3ZK 2 x M4x16 socket head bolts attach it to the side of the Collective. 2 x M3x12…
- Downloads
- 55
- Likes
- 11
- Rating
- 0
P
PrintablesRCHeliGuy
Heavy Duty Profile Caster Mount (M8 , M6 bolts)
This mount is specifically for a profile rig with 160x40 40series frame. It is also specifically for this 880lb set of retractable casters. https://www.amazon.com/gp/product/B08FDFJXK5 It uses 6 x M8x16 bolts and T-nuts socket head And it…
- Downloads
- 52
- Likes
- 18
- Rating
- 5
P
PrintablesRCHeliGuy
SC2 and 200mm Noctua VR Fan Mount
Fan mount for SC2 Sport or Pro bolt pattern and SimLab vertical Mount. This is for VR use only as it would certainly be in the way of screens. This mount uses the long 8mm bolts extending behind the SimLab Vertical Mount and has clearance…
- Downloads
- 50
- Likes
- 4
- Rating
- 0
P
PrintablesRCHeliGuy
TRACKBALL MOUSE 1 PIECE MOUNT ( M5, M6 ) BOLTS
Mount for a Logitech M570 Wireless Trackball Mouse Two versions for either M5x16 or M6x16 bolts to Profile. Bolt holes are on a 20mm grid with the corners at 40mm It uses Velcro 3/4 Coins to hold the mouse to the tray. The image is from…
- Downloads
- 48
- Likes
- 7
- Rating
- 0
P
PrintablesRCHeliGuy
Virpil Collective bracket mount for 40 series profile
This mount is for the Vipil collective bracket with an offset taking the new counter balance into account. It fits to the top of a 40 series profile like the Simlab P1. It uses to M8 bolts on both ends to mount to the profile. I use large…
- Downloads
- 48
- Likes
- 8
- Rating
- 0
P
PrintablesRCHeliGuy
Virpil CM2/CM3 Profile Mount for large stick
This solution is specifically designed for the following: Virpil CM2 or CM3 base Virpil 200mm extension pipe AND Virpil Z extension The Counter Weight works near 0 degrees for the Constellation Alpha grip. Mine was 0.1 degrees off center…
- Downloads
- 47
- Likes
- 11
- Rating
- 0
P
PrintablesRCHeliGuy
SimLab Fairings
Something to dress up the plates that hold the vertical profiles to the base. Requires one M8x16 bolt and T-Nut to attach.
- Downloads
- 47
- Likes
- 8
- Rating
- 0
P
PrintablesRCHeliGuy
Neutrik 8 Pole Connector Mount
Use for a quick connect from a simracing rig to a tactile amplifier. Handles up to 4 channels of transducers. Uses an M8 bolt to connect to profile Made to fit: Neutrik NL8MPR 8-Pole speakON Chassis Connector…
- Downloads
- 45
- Likes
- 7
- Rating
- 5
P
PrintablesRCHeliGuy
Virpil MongooseT-50 Throttle mount to 40 Series Profile
This is a mount for a Virpil MongoosT-50 Throttle. There are two versions. There is a _CM1 version with an additional hole so you can reach both detent adjustments on the bottom of the original throttle. Like my CM2 stick base, this…
- Downloads
- 42
- Likes
- 13
- Rating
- 0
P
PrintablesRCHeliGuy
SimLab SC2 mount cover V3
This is a cover that pressure fits over the 4 cap bolts of the SC2 Sport and Pro. The Ultimate has a different bolt pattern. It will take a rubber mallet to secure it over the cap bolts. I've removed the original STL file which had a…
- Downloads
- 42
- Likes
- 9
- Rating
- 5
P
PrintablesRCHeliGuy
Single Angled 70mm Exhaust take M8 bolt
This is an exhaust pipe for profile sim rigs to be used in any configuration you can dream up. It is 70mm diameter and is angled at 15 degrees. It takes an M8x16 bolt to attach to a 40 series profile rig.
- Downloads
- 42
- Likes
- 2
- Rating
- 0
P
PrintablesRCHeliGuy
Virpil Collective Stick 40 series profile mount
This is a mount for the Virpil collective stick to the side frame of a profile rig. It uses two M8 knobs to hold the 3D printed part to the rig. It uses two M5 bolts into locknuts and two M5 bolts into threaded inserts.
- Downloads
- 40
- Likes
- 8
- Rating
- 0
P
PrintablesRCHeliGuy
Crosswind mount for Simlab P1(X)
This is a 3D printed mount for the Crosswind pedals that fits inside the frame of a SimLab P1(X) chassis. It can be submerged pretty deeply into the frame. I also remix some Pedal bars for the Crosswind pedals that have 10mm of clearance…
- Downloads
- 34
- Likes
- 9
- Rating
- 0
P
PrintablesRCHeliGuy
40 Series Mount for Gen5 D-Box Haptic Bridge
Edit: 8/22/2022 Added Vertical mount with cable support and zip tie slots. Both Haptic Bridge mounts bolt to the side of 40 series profile, like the 40x160mm chassis of a SimLab P1/X. It uses: 2 x M4x16 bolts with M4 T-nuts 2 x M4x8 bolts…
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesRCHeliGuy
Vive Tracker Isolation Mount for 40 series Profile
This is a vibration damping mount for a Vive Tracker to be used with motion compensation software. EDIT: This absolutely will not dampen my D-Box haptics on the race track over a rumble strip or in Rally. It might be suitable for MSFS and…
- Downloads
- 31
- Likes
- 5
- Rating
- 0
P
PrintablesRCHeliGuy
40 series profile Quick Release Flight Throttle mount
April 14, 2023: Updated with new version V8 that has larger bolt heads for the long bolts This mount bolts to Sparco seat brackets with 8mm bolts. The Fusion 360 file is included to make modifications. I have it slightly rotated counter…
- Downloads
- 29
- Likes
- 6
- Rating
- 0
P
PrintablesRCHeliGuy
Button Box Ribbon cable 8P / 16P / 20P 2.54 head connector mount
I'm using these to secure ribbon cables near my button box panels. These are for 8P/16P/20P 2.54mm Socket Header Connector ISP Male Double-spaced Straight needle Curved needle connectors. I'm using them on both sides. One on the panel…
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
PrintablesRCHeliGuy
Profile Neutrik Dual 8 Pole Connector Mount
Use for a quick connect from a sim rig to a tactile amplifier. Handles 8 channels for transducers. Uses an M8 bolt to connect to profile Made to fit: Neutrik NL8MPR 8-Pole speakON Chassis Connectors…
- Downloads
- 27
- Likes
- 6
- Rating
- 0
P
PrintablesRCHeliGuy
USB Cable Clip for 40 series Profile and 4mm USB cable
4mm cable clip for 40 series profile. Uses an M8x16 bolt into a T-nut. I'm using it for controls that have quick releases to remove from my rig to hold cables out of harms way when these controls are on my rig.
- Downloads
- 26
- Likes
- 4
- Rating
- 0
P
PrintablesRCHeliGuy
G-Belt controller 40 series Profile Mount
1/15/2022 Updated with slightly wider M4 G-Belt holes and opened up the M5 holes a bit. This matches the 4 bolt holes of the G-Belt and has M5 bolt holes to fit T-nuts into a piece of 160x40 profile frame for a SimLab P1 rig or similar.…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesRCHeliGuy
40 series USB Cable organizer mount
This is a simple platform to mount a rubber cable organizer, specifically the one or two cable circular mounts like those below. https://www.amazon.com/dp/B07PTZ7LLR?ref=ppx_yo2ov_dt_b_product_details&th=1 It uses an M8x16 counter sunk…
- Downloads
- 22
- Likes
- 4
- Rating
- 0
P
PrintablesRCHeliGuy
Phone Holder for S22 normal case and two M5 bolts
Galaxy S22 phone holder with two M5 bolt holes to mount to Profile or threaded inserts.
- Downloads
- 21
- Likes
- 2
- Rating
- 5
P
PrintablesRCHeliGuy
PSE USB mount for SimLab Vertical
This is a two piece DIN USB mount for a Precision Sim Engineering Wheel through a SimLab Vertical mount without the cable touching the opening. it has a front face that attaches to the rear section with the USB mount. It may be compatible…
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesRCHeliGuy
USB cable holder with cover
I wanted a way to coil up my USB cables on my Sim rig and fan them out neatly to my USB hub. This uses 2 x M8x16 bolts 2 x M5x16 bolts 2 x threaded M5 inserts, I highly recommend the following 10 port USB hub for sim rigs.…
- Downloads
- 20
- Likes
- 4
- Rating
- 0
P
PrintablesRCHeliGuy
No-audio Audiostrap cover
This is a cover that fits over a hole left in the Bigscreen Beyond Audio strap if you cut it close with a hot knife. it expects 2-5 mm of lip after cutting the Speaker section off the audio strap. I liked printing it on a textured plate…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesRCHeliGuy
40 series USB Cable Organizer mount
This is a simple platform to mount a rubber cable organizer, specifically the one or two cable circular mounts like those below. https://www.amazon.com/dp/B07PTZ7LLR?ref=ppx_yo2ov_dt_b_product_details&th=1 It uses an M8x16 counter sunk…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesRCHeliGuy
SimXperience G-Belt Cable support/relief
Helps secure the 4 cables from the G-Belt so they do not fatigue with a chassis motion system. Uses two M8x16 bolts and M8 T-nuts to bolt to 40 series profile. Uses two zip ties to secure the G-Belt Cables in place
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesRCHeliGuy
Trackball Mouse Support
This is a form fitting trackball tray and support for the Logitech M570 Wireless Trackball Mouse and mounts to my SimLab PSE USB Wheel mount back. It uses M3 bolts and M3 threaded inserts as well as "VELCRO Brand - Sticky Back Hook and…
- Downloads
- 16
- Likes
- 4
- Rating
- 0
P
PrintablesRCHeliGuy
D-Box Gen 5 feet rings
This is designed to hold the feet of my D-Box Gen 5 in place on top of large reinforced furniture sliders.
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesRCHeliGuy
D-Box Gen5 Foot holder
I didn't use any supports and just scraped out any loose filiment. This takes an M8x16mm bolt and T-bolt to mount to the underside of a profile rig. I used a dome head bolt. You can see how I use it here.
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesRCHeliGuy
G-Belt Muffler
This is a muffler that reduces the sound from the G-Belt. It uses the existing 6 screws mounts over the top of the existing plate. This video allows you to hear with and without the muffler. The small print uses only 4 bolts. The large…
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesRCHeliGuy
ASR Pro Wheel Mount Accessories
This contains a series of parts for the ASR Wheel Mount. Vertical gauges consist of ( RulerMainUniform, PointerCentered, spacer ) Telescoping gauge ( RulerMainUniform, spacer ) Ideally change colors for the ruler lines. The endcaps that…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesRCHeliGuy
SC2 VR Only Fan mount/cover with Shroud
Fan mount/cover with shroud for SC2 Sport or Pro bolt pattern and SimLab vertical Mount. This is for VR use only as it would certainly be in the way of screens. This mount uses the long 8mm bolts extending behind the SimLab Vertical Mount…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesRCHeliGuy
Toe Scroll Wheel
This is made to fit over the DROK USB Volume Control Knob to use with your foot. https://www.amazon.com/dp/B01MV411BR If you have Word or Notepad open and press the knob down when you plug it in, you can reconfigure it from the default…
- Downloads
- 8
- Likes
- 2
- Rating
- 0
These are all currently available results.