Counting matching models…
'Twas the night before Printmas, when all through the house Not a peripheral was stirring, not even a mouse; The filament were hung by the printer with care, In hopes that St. Josef soon would be there… It's that time of year again. When…
For geocaching, the original textured screw cap container works great, provided you either hide it well or add a loop for hanging it up. But it is a bit small. So to add a little more room for note paper and a less stubby pencil, this…
A document holder, curved tabs for holding loose paper without it falling over. Declutter your workspace without the size or desktop footprint of the usual staples offerings.
Just a quick, print-in-place document holder that can also be used to keep your extra build plates organized. I use mine for my spare PEI plates. Print at 20% infill is adequate, no support needed on my Ender 3 S1 Pro. Holes on the bottom…
So, having bought myself a heated filament clamp for “welding” filament scrap together, or joining short rolls, I found a problem immediately. The instructions seem to assume the existence of a third hand, or second person to be able to…
Just a quick “oh hell, I'll just print one” replacement for the cup from the oversized costco jug of laundry soap. Seems the cups wander off faster than those things empty. Problem solved. Printed mine in creality yellow PLA, 20% infill,…
Love your 400ml yeti coffee mug? So do I! But it just won't fit conveniently in the cupholder on any vehicle. Fear not, this handy adapter will adapt the mug for use in a cupholder, while holding it securely and preventing spills. Remixed…
This is a one and done solution for the whole list of supplies needed by my house for the school year. Pencils, pens, glue, scissors, markers.... Sure! Gridfinity nested trays, cutout designed for Scotch brand 4"scissors. The actual…
A simple insert for a rugged gridfinity box. Sized and prepared for 20 .308 cartridges. I printed mine in PETG with 5 perimeters, 5 top and 5 bottom, 15% adaptive grid infill. Filament used: - EconoFil™ Standard PETG - Army Green - 1.75mm…
Simple three bearing wire straightener. Hook the offending copper zap-snake under the front bearing, over the middle one, and under the third. Stroke it. Stroke it good. There, now it's straight. I printed mine in petg, 5 perimeters all…
I started with the tool holder by vegastobville for inspiration, and remixed the cutter holder and filament bar attachment from that design. But the rest of that design did not fit for what I needed or the tools I was looking to store.…
Updated version of the amulet of Mara. I don't claim the design, that requires artistic skill. ;) What I've done is update the model to include the gemstone as one piece for MMU or XL multi material printing. I've also beefed up the…
Since I enjoy my wonderboom in the workshop, and know that the pegboard hooks from this model: Pegboard Caliper-Holder by herbert | Download free STL model | Printables.com work just fine with Home Hardware brand pegboard, I borrowed the…
A simple shelf to hold small items. It mounts as a drop-in replacement for a north american standard two gang decora switch plate. The larger version is a deeper shelf and has a brace beneath it to handle extra weight. Not much else to…
Simple sponge dryer, raised to drain at an angle into the sink. I added 2x 8mm adhesive rubber feet to the bottom.
Hang up your hat! Hats. one or many. print as many of the second stl as you have ball caps, stagger them, and organize them all in one place. The "weight" to help the last few links hang straight, is designed for a quick handful of ¼" x…
A simple hanger for the Logitech F310 gamepad. Not for use in submarines! It is intended for use with double sided tape and fits nicely on the top corner of a PC case to keep your controller up and out of the way. Tested and kid proven…
The original design was great, IS great, but over time when printed in petg the sides start to warp apart. They also catch on things at the worst times possible. SO. I've remixed the design to tighten up the belt loop just a touch, and…
So I printed the flex filament bypass and it was ok, but it allows for 3 tubes to bypass the filament feed, which to me was more than necessary. As well, the tubes aren't held in place but are loose and fall out. So. Use a 6mm “black”…
A handheld D20 mace, printed in two pieces. You need 3x m3x12 socket head screws, 3x m3 heatset inserts, and as many colours as you plan to print in. I printed the handle at 15% infill, 3 perimters, 3 top and bottom. The die portion can…
In our case we already had a secure nail in the wall where my wife wanted to hang her violin, and did not want to drive two screws or anchors into the sheetrock. I would recommend ensuring that the nail you use is directly into a wall…
Loved the original sign, but it was still too… measured. I “fixed” that. :)
For those times when you want to bring along more ammunition than your rifle holds, but don't want it rattling around in your pockets. I designed this for use with a single shot .22lr a friend of mine hunts small game with. it lets him…
A design born of necessity. The floor vent in my bathroom is right in front of the toilet against the wall. In summer, the AC freezes my feet, in winter the heat from the furnace directly below scorches my toes. Enter the HVAC deflector…
Just a quick replacement part for those plastic doorstops that crack and fall apart over time. Designed as a one-to-one replacement for the stops on my shower doors, although they could likely be adapted or scaled for use with sliding…
IYKYK - it's the demon core. An infamous criticality experiment from the 40s useful mostly as a cautionary tale against arrogance in the face of unforgiving science. An LED night light, in a pleasing (perfectly safe and Cherenkov…
It's the stacktocat you know and love, larger than life and while arguably not as useful for calibration, certainly a lot more useful for neatening up your desk. No special print instructions. Automatic organic supports work, and I…
Tree of life inspired suncatcher. Intended to be printed in silk or solid colour filament, with a translucent/transparent backing. Pictured printed with transparent blue PLA from EnviroLaser3D as well as green, purple and brown from…
Sometimes you need to lay it out clear as mud. Do NOT dumb here. Don't even think about it. Not even a little. And when that fails, just tap the sign. ;)
Just a simple wall hanging version of the quest marker from the skyrim HUD. Full credit to bethesda for the original icon, I merely made it a little more 3 dimensional. Share, enjoy, hang it above doors beyond which you frequently find…
Simple sign, printed in good quality canadian filament. matter3D black, Yellow and Red. Photo stand not included. I like this one: https://www.printables.com/model/922079-collapsible-photo-picture-stand-holder Printed with 3 bottom layers…
To paraphrase the immortal Joe Canada… Hey, I know it’s in our nature to cut a guy some slack, give him the benefit of the doubt, like maybe he was confused or just joking or just maybe really needed a double-double. But this isn’t that…
Just a quick mini stubby for when you need to get at a screw and have VERY little space to do so. I made this set from a cheap $5 set of 10 1/4" bits from the hardware store. Prints just as it is, and I'd recommend fitting the bits in…
So, it's a remix of the ever popular collapsible light saber. For gardening use, and perhaps also for water fights this summer, if you have more than one hose bib, etc. The collapsible blade has been removed. it prints fine with minimal…
FU cat! Now wall mounted. 3mf included to print in place on the XL, or maybe MMU though I can't test that.
Updated to have no bottom in the screen protector. This accomplishes two things. First and foremost the new style LCD fits. Other than that it makes it easier to keep neat and tidy without having tiny bits of filament caught in the tray…
Built around the bambulabs MH001 led lamp kit (compatible substitute: https://a.co/d/dfQSn6q ) this desktop lamp or night light is intended as a follow up to my previous lantern (…
A simple 5 note set of chimes to hang outside your porch or window. I used 40lb test nylon twine, however I think you could get away with any fish line or twine that is weather and sun resistant. The two top halves should be glued and…
Sometimes you feed the cat. But then... The cats claim they have not been fed. Have they? WHO CAN SAY?!? Unless there was some way to confirm. To tell with certainty whether the screaming little gremlins had, in fact, been fed. And when.…
Benchy barge, sized for a 355ml can to fit neatly on board. No supports, no special instructions, send it, load it up with your beverage of choice. Cheers!
Introducing, the electron bucket. A toolbox with a carry handle, designed for din rail mounting two power supplies and the terminals to keep them organized. Individually switched outputs and all. Cornboy, as always, for scale (Look up The…
Introducing the best lunch kit you'll ever drag onto the jobsite. Or at least in my opinion, it's the best I've tried so far. Stormtech's "16 can cooler" with the inner tray for ice packs.…
These are all currently available results.
