Search results: 1

Sort order

175,964 models

P
PrintablesHector

Nasa chainmail (4x4, 8x8, 12x16 and 32x34)

Note: the coned center section design saves print time (prior design required individual deposition points for 12 tiny dots that often failed, but that are eliminated here) and provides the strength needed to eliminate the vertical links…

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant

Downloads
67,258
Likes
13,128
Rating
4.86
P
Printablesvictornpb

Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 1 to 12mm

Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47,048
Likes
16,467
Rating
4.9
P
Printablessoozafone

Dummy 13 - simple display stand

This is a simple display stand for Dummy 13 and other 13 Series figures. The stand consists of a base and two arm segments. You can then choose an adapter for your model from the included files. For best results, use ABS or PETG filament.…

Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42,448
Likes
4,802
Rating
4.83
P
Printablesagepbiz

Print-in-place and articulated F14 Jet Fighter with Improved Wingdesign

Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant

Downloads
42,152
Likes
8,919
Rating
4.87
P
PrintablesJernejP.

Bed scraper - fast print 15min - minimal filament usage 3g

Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant

Downloads
39,451
Likes
3,967
Rating
4.78
P
PrintablesPointNemo

Sanding Block 93x115, 115x140

Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…

Print approx. €5.82–€7.11 excl. taxPreliminary estimate for one variant

Downloads
30,301
Likes
12,817
Rating
4.9
P
PrintablesMichal Blazek

Radius gauge 1-20 mm

Compact gauge for outer and inner radius 1-20 mm. Printed with Prusament PETG, no supports. Layer hight 0,15 mm (first layer 0,20 mm). You need two M5x30 screws and two M5 lock nuts for assembly. Inspired by…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27,335
Likes
9,592
Rating
4.91
P
Printablesfivesixzero

Case for Flipper Zero Wi-Fi Module v1

Simple protective case for the Flipper Zero Wi-Fi Module v1 development board. Flipper Zero Wi-Fi Board Docs: https://docs.flipper.net/development/hardware/wifi-developer-board Models Available: Full Case Requires 4x M3 screws/nuts for…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18,167
Likes
1,126
Rating
4.93
P
PrintablesIconic FAB

Stealth Press 1 — heat set insert press (legacy)

Stealth Press 1 Important! As of November 26, 2024, this revision of Stealth Press 1 is considered a legacy version. We recommend downloading and building the Stealth Press 1S version. Stealth Press 1 revision will remain accessible for…

Print approx. €7.88–€9.63 excl. taxPreliminary estimate for one variant

Downloads
17,342
Likes
5,152
Rating
4.97
P
Printableskh4rj0

Katana for Dummy 13

This is a katana for Dummy 13. It is about 90mm long and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out this remix done by DrunkenGlitchy for a more well defined guard!…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
13,305
Likes
1,180
Rating
4.98
P
PrintablesBoogie

First layer test 100x100 mm square

First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
13,201
Likes
207
Rating
4.89
P
PrintablesHarms3D

Tissue Box Cover #1 - curved Stone Pattern

A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…

Print approx. €15.22–€18.60 excl. taxPreliminary estimate for one variant

Downloads
10,797
Likes
4,511
Rating
4.95
P
Printablesvandragon_de

RMS Titanic 1:1000

There is not much to write about this ship. World famous and unique to this day. The RMS Titanic is my first ship of the 1:1000 series. This is how history comes alive and can be touched. I have given this model a stand and hope that it…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
9,917
Likes
536
Rating
4.95
P
PrintablesJaxal1

Poseable Hand for Dummy 13 (200-500% scale)

Poseable hands for Dummy13. You will need the fingers from Alioth's poseable Lucky 13 hands. They are currently scaled for 500%, but should function down to about 200% (40% of this model size) scale if your printer is dialed in. If you're…

Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant

Downloads
8,681
Likes
1,659
Rating
4.44
P
Printableskh4rj0

Axe for Dummy 13

This is a one handed axe for Dummy 13. It is about 19x59mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
7,787
Likes
873
Rating
4.97

THUMPER 1:8 scale RC Car CJ7 Rock Crawler by BlackCrow (No supports!)

*** Assembly Videos At bottom of this page*** Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
7,787
Likes
2,424
Rating
4.99
P
PrintablesE.C.3D

Ocarina of Time - 12 hole Alto C Ocarina

I will publish new Ocarinas only on MakerWorld. https://makerworld.com/en/@E.CAN3 This is my version of the Ocarina of Time in Alto C . If you like it, leave a like, if you really like it and you want to support me, donations are welcome…

Print approx. €4.73–€5.78 excl. taxPreliminary estimate for one variant

Downloads
7,087
Likes
1,045
Rating
4.82
P
Printablesflioink

Skull Version 1.1

A detailed,(sort of)realistic-looking human skull. This is the first version of it and has some really thin areas on the nose and temporal bones, but prints fine as long as you keep the supplied(or bigger) size. Edit: Fixed to thin areas…

Print approx. €17.58–€21.49 excl. taxPreliminary estimate for one variant

Downloads
7,051
Likes
1,315
Rating
5
P
Printablesvivamus3d

Hygrometer for Filament Dryers (Sunlu S1 and eSun eBox)

The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,407
Likes
360
Rating
4.89
P
Printablestoco_zg

Articulated Snake v1 by Onasiis

Articulated Snake v1 by Onasiis This is not my design, designer is Salvador Manceraonasiis • Spain I just wanted to share it with you.

Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant

Downloads
5,824
Likes
437
Rating
4.94
P
Printablesmcfada

Garmin Approach R10 Golf Launch Monitor Stand - Shot Alignment and Leveling Aid

This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…

Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,634
Likes
200
Rating
4.92
P
Printableskh4rj0

Dragon Slayer Sword for Dummy 13

This is a two handed sword for Dummy 13 inspired by the Dragon Slayer sword from Berserk. It is about 140x16mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out MattoDesign's…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
5,624
Likes
715
Rating
5
P
PrintablesEspen P B

10mm buddy

10mm buddy, a funny little thing to have in the workshop

Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant

Downloads
5,450
Likes
609
Rating
4.85
P
PrintablesSpock

GoPro 9/10/11/12 - Rugged Case 2 Battery Box

UPDATE 12 November 2023: I've received a consistent handful of messages from people who have been downloading the wrong original files so I've reuploaded the correct lid/seal files here as well. UPDATE 13 July 2023: Added a version with…

Print approx. €4.48–€5.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,358
Likes
1,190
Rating
4.93
P
PrintablesPrusa Research

LA1.5 k-factor calibration

This is an advanced calibration, recommended only to experienced users. For more information, read this article . Material Layer height | Fastest speed | PrusaSlicer profile </tr> 0.2mm | 45mm/s QUALITY 0.2mm | 60mm/s SPEED 0.3mm | 50mm/s…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,281
Likes
458
Rating
4.8
P
PrintablesMehTechArt

RWB Porsche 911 <964> Turbo Wall-mounted

Please click if you appreciate my work :) The power of a classic meets rebellious tuning – presenting the RWB Porsche 911 (964) Turbo as a wall-mounted 3D print. This model embodies the aggressive style of Rauh-Welt Begriff, reimagined as…

Print approx. €12.80–€15.65 excl. taxPreliminary estimate for one variant

Downloads
5,240
Likes
1,262
Rating
4.86
P
PrintablesRobert

19" 1U Rack with Moduler trays for Raspberry Pis

This is a 1U Server Rack rack/shelf designed initially to rack mount a bunch of Raspberry Pis. Each 1U shelf should hold up to six Pi 0/3/4/5 or some mixture with accessories. Every attempt is being made so that no supports should be…

Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,147
Likes
828
Rating
4.84
P
PrintablesSalut

Makita 18V Akkuhalterung angewinkelt / Makita 18V battery holder angled

Hier haben wir eine Wandhalterung für 18V Makita Akkus in der angewinkelten Version. Durch die angewinkelte Halterung lassen sich die Akkus angenehmer einlegen und entnehmen als bei den normalen geraden Versionen. Es sind Versionen für…

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant

Downloads
4,915
Likes
447
Rating
4.97
P
PrintablesCLERX

Boeing 787-8 - 1:144

Model description The Boeing 787 is a wide-body, twin engine jet manufactured by Boeing. The 787 is Boeing's most modern and fuel efficient aircraft. It was the first aircraft to rely heavily on composite materials as they make up 50…

Print approx. €6.93–€8.47 excl. taxPreliminary estimate for one variant

Downloads
4,906
Likes
553
Rating
4.96
P
PrintablesZenlayne

F14 Tomcat kit card - Famous Planes

Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! F14 Tomcat This is another plane for your collection : the F14 Tomcat. This kit is…

Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant

Downloads
4,761
Likes
640
Rating
4.91
P
Printableseried

18650 improved spacer/holder

I attempted to use some 3D-printed 18650 spacers, but they weren't ideal. The injection-molded design you can get from aliexpress has two identical tabs on each side, which makes the other printed alternatives weaker. This updated module…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
4,628
Likes
382
Rating
4.41

Prusa Printer Enclosure v2 – with MMU2S support - 0.125 inches acrylic version

**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…

Print approx. €14.44–€17.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,587
Likes
437
Rating
4.74
P
Printableskh4rj0

Shield for Dummy 13

This is a shield for Dummy 13. It prints in two pieces, grip and shield. The 2 fit together with a press fit. (Maybe apply some glue since after a while it gets kinda worn out) The shield is about 34x41mm and 2.5mm thick. I recommend just…

Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant

Downloads
4,556
Likes
543
Rating
4.68
P
Printableskh4rj0

Battle Axe for Dummy 13

This is a two handed battle axe for Dummy 13. It is about 80x30mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
4,290
Likes
552
Rating
4.92
P
PrintablesNautilus Forge

10 inch Rack 1U : 2 x 3.5 inch HDD - HOT SWAP !

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
4,274
Likes
1,071
Rating
5
P
PrintablesTripleB

iPhone 16 case

A Minimalist IPhone case with hexagonal Design on the back and a nice snug fit. Works fine with Both PLA and PETG.

Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant

Downloads
4,142
Likes
159
Rating
4.76
P
PrintablesViren

LEGO F1 Speed Champions Car Wall Mount (Renter Friendly)

This is a wall mount designed for LEGO F1 Speed Champions sets. The most popular commercially available mount for these sets (which this model was inspired by) requires the use of screws, which is not always an option for renters or if…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,058
Likes
607
Rating
5
P
Printablesunit

Radius gauges 1-30mm

Little bit remixed model. See remix diferencies section. Thanks very much to Jaha for his great piece of design in original model and to kisscoool18 for his colored remix. Good job! These remixes can be now complemented by Radius Gauges…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,992
Likes
1,592
Rating
4.9
P
Printablesnilslorand

AWP for Lucky 13 / Mini 13 / Dummy 13

AWP for Lucky 13 . Scale should be in line with this AK-47 for Lucky 13 0.4mm Nozzle can work, but the Bolt and Bipod will be very fragile, especially when having to remove the support material. I managed to keep the Bipod on mine…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
3,880
Likes
677
Rating
4.73
P
PrintablesJeffeb3

Makita Battery Charger DC18RC Wall Mount

Thanks to blueOcean for making this tool mount. I traced it in OnShape and removed the french cleats and added some screws. The charger fits perfectly. Don't mind the multiple colors, I ran out of filament in the middle of the print.…

Print approx. €3.35–€4.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,786
Likes
568
Rating
4.96
P
PrintablesJoey

Bottle Opener / Flaschenöffner in 17 minutes

Hello everyone, here are the print instructions: 0,3mm 5 perimeters (for additional strength) 100% Infill PLA or PETG (PLA is strong enough to open countless bottles) No supports needed Happy Printing and Na zdraví!

Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant

Downloads
3,741
Likes
335
Rating
4.68
P
Printableskh4rj0

Knife for Dummy 13

This is a knife for Dummy 13. It is about 14x12mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :) If…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
3,719
Likes
446
Rating
4.94
P
Printablesmeron

angels and bells - hangable Christmas ornaments - fast print (11-28 min)

Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
3,645
Likes
766
Rating
4.93
P
Printableskh4rj0

Trident for Dummy 13

This is a trident for Dummy 13. It's about 150x30mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :) If…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
3,642
Likes
519
Rating
4.91
P
Printableswedgeworks

Fruit and Vegetable Washing Basin from Thingiverse # 5685812

NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant

Downloads
3,608
Likes
1,665
Rating
4.67
P
PrintablesHenlor

Motherboard Fan Mount Mk2 Collection - Creality K1 Series

I designed those for two reasons. First, it's a pain to handle the bottom panel with the fan cable still attached to the motherboard. And second, when printing ABS, I was astonished to feel how hot the frame was. And I didn't like the…

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant

Downloads
3,534
Likes
553
Rating
4.97
P
PrintablesJerryie

Porsche 911 (996) GT2 kit card

In scale 1:64 To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer 0,16mm layer height

Print approx. €8.01–€9.79 excl. taxPreliminary estimate for one variant

Downloads
3,500
Likes
855
Rating
4.82
P
Printablesmochr

Jawa 50/21 Pionyr

Legendary moped Jawa 50/21 Pionyr from Czechoslovakia 1967-1978. 50ccm, 3,5HP, Scale model in 1/10 - 20 cm length Manual in .PDF (Czech) Designed for SLA/DLP printer! Only for personal use and gift! https://www.buymeacoffee.com/mochr

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
3,490
Likes
838
Rating
4.93
P
PrintablesEmkatech (Mike)

Simple Handle – 12 Sizes | Handle for M6 Screws

The M6 Handle Collection offers a robust and practical handle for M6 screws – in 12 different sizes , providing maximum flexibility for your projects. This universal design is perfect for workshop applications, mechanical engineering,…

Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant

Downloads
3,197
Likes
1,489
Rating
4.91
P
Printablesrrro

M134 minigun for LUCKY 13 / Dummy 13

Is your “13” tired of all these weak SMGs and AKs? Try the famous minigun! Its six rotating barrels produce an uninterrupted stream of hot lead, obliterating most troubles out of its way. (Do you need something even bigger? Try out the…

Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant

Downloads
3,133
Likes
1,056
Rating
4.88
P
PrintablesFAYRON

MACH 1 Gen.1 - Raspberry Pi 5 Enclosure

The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…

Print approx. €6.44–€7.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,116
Likes
470
Rating
4.94
P
Printableskh4rj0

Longsword for Dummy 13

This is a longsword for Dummy 13. It is about 100x22mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :)…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
3,095
Likes
390
Rating
5
P
PrintablesBen

M2 - M10 Phillips Screws in all sorts of lengths (incl. STEP)

A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
3,038
Likes
1,164
Rating
4.5
P
Printablesanimatorgeek

Snake puzzle toy (100% 3D printed)

Edit July 2nd 2022: uploaded new version without unneeded hole supports . I found several other snake toy models online but none of them lived up to my hopes and dreams. I wanted one that didn't require extra hardware and had a satisfying…

Print approx. €2.65–€3.23 excl. taxPreliminary estimate for one variant

Downloads
3,021
Likes
1,008
Rating
4.67
P
Printables3DVJ Models

ChooChoo - A Lightweight/Support Free 4 Tone Train Whistle v3.1

Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…

Print approx. €5.15–€6.30 excl. taxPreliminary estimate for one variant

Downloads
2,938
Likes
839
Rating
4.96
P
Printablesk014

k014's Parametric 18650 Battery Holder (opensource)

This design was inspired in 2 other designs in this site: https://www.thingiverse.com/thing:2339441 https://www.thingiverse.com/thing:2668159 Since I could not find for the original file to adapt it to my battery with protection circuit…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
2,938
Likes
472
Rating
4.92
P
PrintablesKajry

Lego Technic Oracle Red Bull Racing RB20 F1 (42206) wall mount

Wall mount for Lego Oracle Red Bull Racing RB20 F1 set 42206. This mount uses two gray pins on the bottom of the F1 to hold. You can easily see this pins trough the seat for easy hanging. Print settings: Infill: 30% 3D gyroid Perimeters: 3

Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,882
Likes
120
Rating
5
P
Printablesdhiltonp

Gridfinity Battery Box: CR2032/CR2016, 357/303/SR44 and A23/MN21/AAA slots

This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…

Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant

Downloads
2,871
Likes
553
Rating
4.9
P
Printablesgeektoybox

Logitech C270, C310 and C505 Focus Wheel (Complete)

I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,789
Likes
423
Rating
4.94
P
PrintablesZenlayne

C130 kit card - Famous Planes

Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! C130 Hercules This is another plane for your collection : the massive C130 Hercules !…

Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant

Downloads
2,788
Likes
490
Rating
4.95
P
PrintablesLadousek

TriStar Stackable Modular Organizer – 200×150×75 mm

📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…

Print approx. €9.58–€11.71 excl. taxPreliminary estimate for one variant

Downloads
2,755
Likes
838
Rating
3
P
Printableselatobi

Depth gauge set for 5-14 mm drills.

This is a set of Depth gauge for 5-12 mm drills. They have a opening for M3 nuts an cylindrical screws to tight the stop on the drill bit. Printed with PETG @ 0,2mm layer hight with 20% infill.

Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,750
Likes
1,264
Rating
4.67
P
PrintablesPrism08

Mercedes UNIMOG U5023 Cabin / Body (RC CAR / RC TRUCK) 1/10 scale

November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
2,726
Likes
416
Rating
5
P
PrintablesTinkrMakr

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,669
Likes
521
Rating
4.82
P
Printablesorax

18650 Battery Holder Bracket

Simple 18650 brackets to store your batteries safely, brackets can be connected together using the tabs on the side. Printing The model should be printed with the front section on the build-plate (see the 3mf file) and can be printed…

Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant

Downloads
2,652
Likes
227
Rating
5
P
PrintablesDoMakePrint

SanDisk Extreme Portable SSD (SDSSDE61) Compact Case

Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
2,612
Likes
492
Rating
4.85
P
PrintablesBruno Vinícius

Mini 13: Wings

I have some more extras for MINI 13 on the way, but for now, here we have Wings. This model replaces the backpack, using the hole on the back of the model. The wings are super easy to assemble and strong enough to be resistant to impact.…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
2,594
Likes
344
Rating
4.8
P
Printablesextrablind

Battery Adapter From Parkside X20 to Makita 18v | extended body | Parametric | F3D

[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…

Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant

Downloads
2,465
Likes
185
Rating
4.4
P
PrintablesDominik Vichr

F1 Calendar 2026

🏎🏍3D tisk – Stolní kalendář Formule 1 2026 Stylový stolní kalendář inspirovaný sezónou Formule 1 2026, navržený pro 3D tisk. Ideální pro fanoušky motorsportu, kteří chtějí mít přehled o závodním roce přímo na pracovním stole nebo v dílně.…

Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant

Downloads
2,443
Likes
233
Rating
4.3
P
PrintablesMehTechArt

Porsche 919 Hybrid Le Mans Wall-mounted

Please click if you appreciate my work :) Silence broken only by hybrid fury. This wall-mounted 3D printable model of the Porsche 919 Hybrid pays homage to the three-time Le Mans champion. With its centralized cockpit, wide aero arches,…

Print approx. €12.71–€15.54 excl. taxPreliminary estimate for one variant

Downloads
2,439
Likes
681
Rating
3
P
PrintablesNora

Ender 3 V3 SE Single 5015 Fan

Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 20% Filament : PLA

Print approx. €3.08–€3.77 excl. taxPreliminary estimate for one variant

Downloads
2,417
Likes
497
Rating
4.65
P
PrintablesEmkatech (Mike)

Ruler Stop S – Precision Scale Stop for 0.5×15 mm Ruler | M3–M6 Versions (Small Version)

📝 Description The Ruler Stop S is a compact and precise stop designed for 0.5 × 15 mm rulers , ideal for workshop use, model making, and DIY applications. To make it максимально flexible, the model is available in four versions (M3, M4,…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,416
Likes
953
Rating
5
P
Printables3D-Print Brehm

IKEA 365+ Box 10,6 Liter - Filament Dry Box mit 2x Silica Zylinder (für PRUSAMENT 2 Rollen) mit digital Hygrometer

Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…

Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,360
Likes
399
Rating
4.33
P
PrintablesBen

M2.5 - M10 Countersunk Screws in all sorts of lengths (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of countersunk screws with Phillips drive according to ISO 724 , ranging in sizes from M2.5 to M10, each available in lengths of 10 mm, 16 mm, 20…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
2,358
Likes
453
Rating
5
P
PrintablesTinkrMakr

Sewing Cloth Tape Measure Winder Case 14mm and 18mm Snap Fit

Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,341
Likes
656
Rating
4.7
P
Printablessteve457

Milwaukee M18 Stubby Nozzle - FUEL Blower Model 3017-20

This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…

Print approx. €13.60–€16.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,313
Likes
209
Rating
5

Sunlu FilaDryer S1 filament dryer box PTFE fitting mounts (M10/M6)

Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…

Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,272
Likes
332
Rating
4.94
P
PrintablesZenlayne

B17 kit card - Famous Planes

Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! B17 Here is the first aircaft a the set : the famous world war two american bomber :…

Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant

Downloads
2,227
Likes
407
Rating
4.83
P
Printablesakamaka

1.75mm Filament-Splicer-Guide Print-in-Place

Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…

Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant

Downloads
2,193
Likes
222
Rating
4.27
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount

Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,107
Likes
685
Rating
4.81
P
PrintablesbyWulf

100g Mini Spool

Modified the original “Last Meters Mini-Spool” of AlexStinson to be even more small and improved some features. You have only a little bit left on the big 1kg spool and want to save space? This is for you! You have some 50g filaments…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
2,025
Likes
302
Rating
4.88
P
PrintablesJackson

USB box V2 10 sticks

This is version two of my usb box. This is a box for storing usb sticks. I designed this new version to replace my old version with a better one. I use it to store my OS installers. It's a must have for anyone in system building or system…

Print approx. €7.19–€8.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,008
Likes
226
Rating
4.95
P
PrintablesAMPERAGE

12 Gauge Shotgun Shotshell Holder (Matchsaver) - M-Lok Compatible

Simple, single 12 gague shotshell holder to give sporting shooters that one last round to complete a stage (when you miss that last critical shot - we've all done it!). This is a remix based on glompos21 design on Thingiverse. I've…

Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,007
Likes
258
Rating
5
P
Printablesjb

5015 adapter for Sovol SV06 extruder

UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…

Print approx. €0.74–€0.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,995
Likes
158
Rating
4.92
P
Printablessternli27

Bosch Professional 18V Battery Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…

Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant

Downloads
1,988
Likes
239
Rating
4.6
P
Printableskh4rj0

Round Shield for Dummy 13

This is a round shield for Dummy 13. It prints in two pieces, grip and shield. The 2 fit together with a press fit. (Maybe apply some glue since after a while it gets kinda worn out) The shield is about 48x48mm and 2.6mm thick (6mm in the…

Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant

Downloads
1,969
Likes
279
Rating
4.92
P
PrintablesAWSW

WordClock 16x16 LED matrix

BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant

Downloads
1,921
Likes
778
Rating
4.94
P
Printablesweirdswiss

M-Lok ForeGrip AR15

Hello to all gun-guys and trigger happy people! I made an foregrip for my AR-15 in an extremly light, slim and tiny version, just to fit on your gun with M-Lok rail. I recommend to print with support and an infill of min. 50%. Like this,…

Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant

Downloads
1,909
Likes
408
Rating
5
P
PrintablesTheroux

Shotgun Shell Holder / Side saddle (12 & 20 Gauge)

Summary: There are various version of this simple shotgun shell holder / side saddle available. On the uploaded pictures (Maverick 88) I used the 12G_5pcs_25mm__straight_velcro version. As Filament I used Prusament PETG with Carbon Fibers…

Print approx. €2.22–€2.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,889
Likes
219
Rating
5
P
Printablesilupix

POLYGONAL FEMALE HEAD - Dummy 13 Version 1

This female head part is designed to seamlessly integrate with Dummy 13 (Version 1) body design. Perfect for seeing the facial features!

Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant

Downloads
1,875
Likes
359
Rating
5

Magic: The Gathering Counters / Chips UPDATED 5-3-2019 (Life, Mana, Abilities, Loyalty, Energy, Power, Toughness) MtG #MtGCounters

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are stackable counters…

Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant

Downloads
1,843
Likes
485
Rating
4.89
P
Printableswoelpi

PC4 drybox feeder with knurled screw-on cap (M10&M6)

I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
1,829
Likes
353
Rating
4.91
P
Printables3D Sets

Model 1: Rancher 4x4

Rancher 4×4 – 3d printable set of parts for your 3d printer. Model is approx. 53 cm long (1:8 scale) and is prepared for your RC equipment. You can buy this model on www.3dsets.com What you get: 3d printing files: .stl and .gcode…

Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant

Downloads
1,819
Likes
657
Rating
5
P
PrintablesQincon

WAGO terminal mount 221-415

The WAGO terminals should have a tight fit and held in place by the mount. I put some text on the outside for the most common use cases in small electronic projects. In case you want to do this on your own, I uploaded a model without text…

Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant

Downloads
1,772
Likes
271
Rating
5
P

F/A-18F Super Hornet Kit Card

The Boeing F/A-18 Super Hornet is a carrier based multirole fighter. First entered service in 2001, as a larger and more capable variant based on the F/A-18 Hornet airframe. The F/A-18F (F is the two-seater variant) Super Hornet Block III…

Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant

Downloads
1,771
Likes
339
Rating
4.88
P
PrintablesSASSy Design

Crystal Chandelier Pot and Planter for House plants - Vase mode - Version 1

The pot is inspired by the structure of old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…

Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant

Downloads
1,771
Likes
548
Rating
5
P
PrintablesRonanWarrior

Wall Mount for Lenovo M11 Tablet (2024)

Update 2025-6-25: Added fusion 360 archive file so other can edit or adjust file as they want. Please do not judge me to harshly, I did not label all of my sketches. A slim profile wall mount for a Lenovo M11 tablet so it can be used as a…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
1,693
Likes
70
Rating
5
P
PrintablesAllpa

Lashing strap clip 1“ and 1-1/4“ mm / Spanngurt-Clip 25 und 35 mm

No pleasure for unrolled tension belt straps? With this simple but equally effective clip, this is a thing of the past! Simply attach to the rolled webbing and the clip holds the roll securely and reliably together. Suitable for all…

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
1,681
Likes
214
Rating
4.94
P
Printablesb_sb

Shower Hook - All Sizes - Glass 6mm, 8mm, 10mm, 1/4", 3/8", 1/2" + FreeCAD Parametric Model

Details: Available for glass panes with the thickness of 6mm, 8mm, 10mm, 1/4", 3/8" and 1/2". All models available as STL and STEP file. All models have a 0.1mm extra tolerance in the thickness. Print flat for maximum strength. No…

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant

Downloads
1,668
Likes
609
Rating
5
P
PrintablesSoarpix

Tractor - Ferguson TE20 - Fully printable kit - scale 1/18

All my designs are free to download, but if you like my work please consider to buy me a coffee =) Ferguson TE20 - Fully printable kit - scale 1/18 EDIT: Since the Ferguson TE20 sometimes have the headlights mounted on the sides of the…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
1,657
Likes
301
Rating
4.76