Search results: 10inch

Sort order

69 models

P
PrintablesCaptainAl

10inch 1U Raspberry Pi with SSD 2.5" rack mount (3 raspberry pi modules and 3 SSD)

Simple and helpful 1U Raspberry Pi with SSD 2.5" rackmount for 10inch network cabinets. It supports 3 Raspberry Pis. How to print: Print with 0.30mm layer height and 70% gyroid infill. Make sure your print is in PETG , ASA , or…

Downloads
415
Likes
56
Rating
4
P
PrintablesPost24

Dell Wyseclient 5070 10inch Rack Mont

Hi since i got an 10inch rack i wanted to rackmonut my mini Server in it. Unfortunatly there are only 19inch Rack mounts avalibile online i created my own for my Wyseclient 5070. Printed in ASA on my P1S i recommend ASA it could get hot…

Downloads
412
Likes
18
Rating
5
P
PrintablesHobbyist Notes

HP EliteDesk 600 G6-G9 Mini PC 10inch Rack mount

Original model was too tight and mounting holes are to narrow/far for some racks. Print 2 one for front and one for the Back. I used ABS to print it you can also use PETG. More infil - stronger part! I used 4 walls, 5 shell layers, 10%…

Downloads
400
Likes
43
Rating
5
P
PrintablesMihir

Unifi Cloud Gateway UCG Max and Ultra 10inch Rack

Remixed towilab's design to allow for access of the UCG max's SSD port. Made the L-portion of the ‘clip’ on the right side a bit more aggressive while removing the left side one entirely, allowing super secure retention despite only…

Downloads
377
Likes
36
Rating
5
P
Printableswhitespring

UniFi Cloud Gateway Ultra 10inch rack shelf

This is a matching shelf for Unifi Cloud Gateway Ultra. Fits with the lenovo tiny shelf, my TrendNet mod and my FritzBox mod. Printed with 10% infill and supports (slicer complains without, but I don't think there really are supports)…

Downloads
356
Likes
26
Rating
0
P
PrintablesTurnpike

10inch Rackmount ITX Motherboard Case

This model can fit an ITX Motherboard and 2 80mm fans in a 2U form factor. Model includes some holes for zipties to manage cables. I've included an optional backplate that can be modified to suit any cutouts you may want. Bill of…

Downloads
353
Likes
426
Rating
0
P
Printableswhitespring

D-Link DGS 1008 switch 10inch rack shelf

This is a matching shelf for D-Link DGS 1008P POE Switch. Fits with the lenovo tiny shelf, my TrendNet mod and my Cloud Gateway

Downloads
345
Likes
21
Rating
0
P
Printablesmasiakla

Netgear GS305EP 10inch rack mount

Originally model was prepared for GS305EP switch, but considering size of other GS equipment, it should accommodate most of them. Model has tolerances, so switch does not have to be forced into it. End plate requires M2 screws, holes are…

Downloads
267
Likes
22
Rating
5
P
PrintablesCryPt00n

Improved 10inch Server Rack Connectors

Key Features: Increased Connector Thickness : The connector parts have been designed with increased thickness for improved stability and durability compared to the original model. Longer Screws Required : Due to the thicker connectors,…

Downloads
243
Likes
21
Rating
5
P
PrintablesArtifab

10inch modular rack

A modular, expandable 10in rack system. Can be expanded to take 19in equipment, and will also accept euro-rack modules I'm adding new features daily, so please keep checking back. If you like this model, please consider buying me a…

Downloads
228
Likes
82
Rating
0
P
PrintablesMihir

10inch Rack for Hitron CODA56 Modem

Print in PETG with front facia on the bed, and with supports - Prusa Slicer Snug is the best for this. Please see the comments section for some important details discussed. The tl;dr is - the stubby leg things that protrude out the bottom…

Downloads
190
Likes
11
Rating
4
P
PrintablesRex Tang

7.84 LCD Mount for 10inch 2U Rack

7.84inch IPS Touchscreen with DeskPi Rackmate T1. This 7.84-inch touchscreen from WisdPi fits perfectly into a 10-inch rack, boasting a resolution of 400x1280. It looks very delicate, and the IPS screen offers excellent color…

Downloads
180
Likes
33
Rating
0
P
PrintablesRobchiks

Mikrotik hEX, RD2x0GS 10inch rack mount

Mikrotik hEX, RD2x0GS 10inch rack mount

Downloads
179
Likes
18
Rating
4.5
P
PrintablesThomasGebets

Noctua 140mm Fan for 10inch rack

This is a mount for a noctua 140mm fan within a 10 inch rack. It is designed as 3.5 U with a 4U option. Just let me know if you have questions :)

Downloads
174
Likes
21
Rating
5
P
PrintablesMihir

Unifi Flex 2.5G Poe 10inch Rack

print in petg, with front facia on the print bed. use supports -- prusa slicer's snug works best.

Downloads
127
Likes
13
Rating
0
P
PrintablesTurnpike

10inch Rackmount HDD and PSU Case

This model was inspired by Shaztech's "12 Trays HHD Enclosure, 3U Rack Mountable" however, almost everything was redesigned in order to fit my needs. This model can fit 4 3.5in HDDs, 1 SFX PSU, and a 16mm power button. I recommend…

Downloads
127
Likes
79
Rating
0
P
PrintablesBluecrane

10inch 1U Rack Fan Tray for 92mm Fan (Noctua NF-A9 Compatible)

1U 10" Rack Fan Tray for 92mm Fans (Noctua NF-A9 Compatible) This is a custom-designed 1U tray for a 10" server rack. It is sized to fit a standard 92mm fan—specifically designed around the Noctua NF-A9 5V PWM , but it should work with…

Downloads
117
Likes
26
Rating
0
P
PrintablesMrMaKr

TopPanels to close the gap for Modular 10inch Server Rack

Some Top Panels to fully close the gaps in the Modular 10inch Server Rack when using the topper and Handles. The standard is always 3mm thickness. But if you are usind the Multiboard Add-On, then you will need the wider 6mm frontpanel and…

Downloads
111
Likes
32
Rating
5
P
PrintablesUwUTastisch

10inch Rackmount, TP-Link LS108G, TL-SG108 and 2 Keystones, FreeCAD

I made this since i could find others People work that published any CAD-Files under Public-Domain I've tested it for mounting my TP-Link LS108G and TL-SG108 as well. Feel free to edit my design for other Switches as well. Please…

Downloads
111
Likes
18
Rating
5
P
PrintablesAst0815

5-inch rack (10inch halfrack) Raspberry Pi 4B mount

A mounting solution for Raspberry Pi 4B in a 5-inch rack / 10-inch halfrack . Requires 6 ISO 10642 countersunk M3x10 screws and fitting heat set inserts. The M2.5 screws to mount the Pi screw directly into the plastic.

Downloads
90
Likes
20
Rating
5
P
Printablesshnlls

2U 60mm fan mount for 10inch rack

This is a 2U mount for three 60mm fans for a 10 inch rack systems. The braces on the back are for reinforcement and include holes for cable management.

Downloads
87
Likes
8
Rating
0
P
PrintablesBasementLAB

10inch Rack Module RASPBERRY PI 3_4_5 Model V

10inch Rack Module RASPBERRY PI 3_4_5 Model V Work in progress: Content of this Thing can still change in the near future All trademarks, logos and brand names are the property of their respective owners

Downloads
75
Likes
18
Rating
0

Xiaomi M365 10inch mod front fork reflector plate

in order for the 10 inch wheel to fit, i had to mount the wheel a bit lower. but the reflector cap did not fit anymore,

Downloads
73
Likes
10
Rating
0
P
Printablesimpulse1delta

D-Link DGS-108 10inch Mini Rack shelf

Compatibility This rack shelf if design to accommodate a network switch D-Link DGS-108 , model EGS108E C2E to be precise. The D-Link DGS-108 switch has varied over the years, your model may have a different size ! Please check carefully…

Downloads
72
Likes
6
Rating
5
P
Printablescarterlabs

10inch rack 2U 12-bay 2.5" disk shelf (WIP)

WIP - DISCLAIMER - WIP This is a work-in-progress, parts of this are unfinished, parts are currently missing, tolerances & clearances are still being worked on so parts might not fit together properly. Part orientation is not correct in…

Downloads
70
Likes
21
Rating
0
P
Printablesbrunoh

Fanless Mini PC J4125 10inch Rackmount

This is a remix of the closed shelf for the 10 inch rack project to fit a Mini PC J4125 4 eth ports. https://www.aliexpress.com/item/1005004337724378.html Printed with PETG. Print Settings Printer Brand: Creality Printer: K1 Supports: Yes…

Downloads
65
Likes
7
Rating
0
P
PrintablesMrMaKr

Sidepanels for Modular 10inch Server Rack

Remix of some of the sidepanels to make them compatible with screws, that go through the holes all the way, like these: rackstud-m6-m8-m10-screws-and-nuts-hex-and-knurled

Downloads
59
Likes
9
Rating
0
P
Printablesklayf

SKADIS Pegboard for 10inch Rack

SKADIS Pegboard Panel for 10inch Rack Pegboard for 10-inch rack panels compatible with SKADIS accessories Using these blank panels allows you to utilize the remaining space on your 10-inch rack for various SKADIS accessories, such as…

Downloads
55
Likes
12
Rating
5
P
PrintablesPAC

Hisource K0802WS 10inch Rack Mount

Mount that allows the Hisource K0802WS Switch Hub to be mounted in a 10inch rack The height and bolt hole spacing are standard 1u spacing

Downloads
49
Likes
5
Rating
0
P
PrintablesArtifab

Modular 10inch drawer chest

A modular drawer system based on my 10inch server rack: https://www.printables.com/model/1182834-10inch-modular-rack The drawers are 1u deep. The rack blocks are 1u tall. However, the drawers do not have to line up with the blocks, so you…

Downloads
41
Likes
10
Rating
0
P
Printablessusuga

10inch tablet stand for Japanese children

This is a stand for a 10inch tablet. It looks simple, but after much trial and error, I arrived at this shape. The angle of this stand fits the Japanese lifestyle. (Japanese people often do not sit on chairs in the living room. It is…

Downloads
37
Likes
3
Rating
0
P
PrintablesWilfred

2U 80mm dual fan panel for 10inch home lab. Fits PRUSA I3

A 2U fan back panel for your home lab rack. This version fits your I3 when printing with no skirt. Had to redraw it because my PRUSA didn't understand imperial :-D. This design came from https://github.com/JaredC01/LabStack .Look him up,…

Downloads
36
Likes
8
Rating
0
P
Printablesr15ch13

10inch 40mm Fan Rack Mounting Plate

Print in PETG. In the middle a 4 channel PWM Fan Speed Controller can be installed. https://www.amazon.de/dp/B0DX5MMKYQ https://www.aliexpress.us/item/3256809630441224.html

Downloads
35
Likes
7
Rating
0
P
Printablesl8cloud

Zyxel GS1200-8 10inch 1U Rackmount

A generic 10 inch 1U Rackmount for the Zyxel GS1200-8 i bought for my Lab Rax. Locks the switch in place without requiring screws, allowing it to be mounted in virtually any orientation. Upside-down, hanging in a rack or standard vertical…

Downloads
33
Likes
2
Rating
0
P
PrintablesPavelB

2 and 3 holes 10inch - TP-Link TL-SG108 holder

You can find here 2 holes and 3 holes versions of the holder for TP-Link TL-SG108, 8port switch. I used PETG, 0.2mm with no issues. Enjoy

Downloads
28
Likes
3
Rating
0
P
Printablesburro_jockey

10inch rack mount for tenda SG108

Has space to plug it in, just had this switch on hand and needed a mount for it. Used double sided tape for it, but could definitely use the screw mounts. If you want to add these pm me/comment and I can upload the .step

Downloads
25
Likes
2
Rating
0
P
PrintablesGM

7.84 LCD Mount for 10inch Rack

Frame and adapter for the driver board to fit the 7.84 Inch 7.9 IPS LCD Screen Long Strip Portable Monitor 400*1280 Display Module https://de.aliexpress.com/item/1005005087157277.html The adapter can be screwed or glued to the frame.

Downloads
24
Likes
6
Rating
0
P
PrintablesSJ-Prints

Mod10 Unifi AP top mount - 10inch rack

Modified top Mount for Mod10 so can securely Mount a unifi ap. Tested with u6LR, I believe the pro and unifi 7 line use the same Mount but not tested myself. Will not fall off can be held upside down as shown in photo. Note: if you have a…

Downloads
24
Likes
5
Rating
0
P
PrintablesKnoppersDE

Fritzbox 7560 10Inch Rackmount

You will need to disassemble the Fitzbox first. Two screws are below the rubber feets, we careful not to miss them. PCB of the Fritzbox can just be put into the printed mount. I used 4 M3 heatset inserts in the corners and 4x M3x12 screws…

Downloads
23
Likes
4
Rating
0
P
PrintablesCrami

7" Display Mount for 10inch rack

This 7" Display Mount for 10inch rack7" is designed in three parts so it can be printed on a 250mm wide bed. The 3 pieces have to be screwed together with screws and heat inserts.

Downloads
22
Likes
1
Rating
0
P
Printablesreavaa
Downloads
20
Likes
1
Rating
0
P
PrintablesLaho

Frame reducer 8x10inch to 9x12cm

Large format photography frame reducer for my 8x10 holder. I shoot wetplates and need to do some 9x12cm sometimes. My printer in only 22cm wide so I designed it in two parts. Printed in PLA 15% infill and supports.

Downloads
20
Likes
0
Rating
0
P
PrintablesMegaterion

Switchmount for 10inch Serverrack

I printed this with Prusament ASA

Downloads
16
Likes
4
Rating
0
P
PrintablesLaho

Frame reducer 8x10inch to 13x18cm

Nocing really fancy, I needed a frame reducer for my 8x10inch camera to get 13x18cm pictures. So I designed it in Fusion 360 and here is the result. I'm making wetplates by the way, so I don't think this could fit for film unless you make…

Downloads
16
Likes
0
Rating
0
P
PrintablesMarcell B

OpenGrid Rack Ears — 10inch rack and shallow-rack side mount

OpenGrid Rack Ears — 10" front and shallow-rack side mount A remix that lets you snap OpenGrid plates directly onto a rack, either across the front of a 10" rack or down the side of a shallow rack (350mm internal depth). Turns dead rack…

Downloads
15
Likes
11
Rating
5
P
PrintablesDFB3D

Verizon Gateway 10inch rack mount

remixed this shelf by @HenryCrete_1056952 into a rack mount for the 3-D printable rack, Mod10 by MandicReally. Why? idk takes up 3U

Downloads
12
Likes
2
Rating
0
P
PrintablesNick Pegg

dlink go-sw-5ge 5 port mini switch 1u 10inch rack mount

dlink go-sw-5ge 5 port mini switch 1u 10inch rack mount Found this super tiny 5port Ethernet switch at a thrift store. Had to add it to my mini rack. This is a 1u rack that holds the switch in the center of the rack. It can face forward…

Downloads
12
Likes
1
Rating
0

Framework 13 Mainboard: Framework Forever II 10inch AIO

New year new project. A Forever case II with built in monitor for quick switch between using as a desktop on a big screen to carting it in to a meeting or wherever, and being able to use it as tablet or portable computer. Essentially…

Downloads
12
Likes
2
Rating
0

10Inch server rack tp link router

note that you will need 4 m3-10 bolts to mount the router tonote that you will need 4 m3-10 bolts to mount the router to the holder

Downloads
10
Likes
2
Rating
0
P

Timing belt pulley / gear for 10inch lazy Susan bearing

This HTD-5M timing belt pulley / gear attached to the outer ring of a 10 inch lazy Susan turning it into a turntable or turret. Here is the lazy Susan that it fits https://amzn.to/4bEHdVD Designed by EthanW-27 and PrabhavG-26 for use in…

Downloads
8
Likes
0
Rating
0
P
PrintablesHobbyist Notes

LinkStar-H68K 10inch rack mount Plate

This devices doesn't have Active cooling I recommend using PETG or ABS. You will need to take side bolts out and use longer to screw thru the mount. Print on front panel side flat down.

Downloads
7
Likes
1
Rating
0
P
PrintablesRip Woozy

HUNSN RS34c 10inch Rack Mount - 1U & 2U Versions

HUNSN RS34c 10-Inch Rack Mount A simple rack mount for the HUNSN RS34c firewall , made in two versions: 1U and 2U . I bought this firewall for my homelab, but I noticed that there were no proper rack mount supports available for this…

Downloads
7
Likes
1
Rating
0
P
PrintablesLee

10inch Rack - Mikrotik CRS310-8G+2S+IN

Simple ears to mount Mikrotik CRS310-8G+2S+IN in 10" rack.

Downloads
5
Likes
0
Rating
0
P
PrintablesPAC

KT GigaFiber2 10inch Rack Mount

A mount that can mount the KT GigaFiber2 wired router in a 10 inch rack Supports 4 keystonejacks The height and bolt hole spacing are standard 1u spacing

Downloads
4
Likes
0
Rating
0
P
PrintablesMrWho_

Ethernet cables cover, 10inch rack

This model is as simple as it looks like : it's a facade with the sole role of covering you're nasty ethernet cables flying around a 10inch rack ! It's a first attempt to make a simple facade with two flexible part, not the sturdiest, you…

Downloads
4
Likes
3
Rating
0
P
PrintablesPsyhas

Cisco 8 port swich 10inch rack mount

My first model 10" rack Cisco SG100-08p switch shelf this may fit other similar models that have the ruber feet near the edges. internal diameter is: W162mm, H32mm, D150mm. This doesn't have a securing mechanism for holding the network…

Downloads
4
Likes
2
Rating
0
P
Printablesfoorsee

Nuc5i5ryb 10inch rack mount

Made for 10 inch racks. Power button is accessible. I don't have an original drive caddy or cables, so I cant check if it fits. You may need to make a custom sata power cable. For this refer to official datasheet of this board. I used M3…

Downloads
4
Likes
0
Rating
0
P
Printablesdjay74

10inch_form_tube

10inch_form_tube

Downloads
3
Likes
0
Rating
0
P
PrintablesMrWho_

Protecli VP2420 + JetKVM, 10inch rack (2U)

This is an adapter suited for the module from Protecli "VP2420" and the famous screen JetKvm. It has been designed for 10inch rack, and have holes for the bottom screws of the protecli, so that it flush perfectly against the front panel.…

Downloads
3
Likes
2
Rating
0
P
PrintablesMrWho_

Protecli VP6600 series, 10inch rack (2U)

This model is an adapter for the Protecli VP6600 series (Vault Pro VP6630, Vault Pro VP6650, Vault Pro VP6670). It has been designed for 10inch rack with the smallest footprint possible but with a sturdy design in mind, aeration, and a…

Downloads
2
Likes
0
Rating
0
P
Printablesbleugreen
Downloads
2
Likes
0
Rating
0
P
PrintablesJohn Smith

10inch minirack combot : JT-COM 2.5g + raspberry pi 3b

This is the upgraded version of my previous switch panel https://www.printables.com/model/1887973 It uses a cheap yet very compact switch from Aliexpress…

Downloads
2
Likes
0
Rating
0
P
PrintablesNÄRD

10inch Rackmount, IPFire Appliance 2019 and 2 Keystones, FreeCAD

IPFire Small Appliance (2019) Mount This is a remix of the original design, modified to mount the IPFire Small Appliance (2019 model). For this remix, I adapted the design to accommodate the IPFire Small Appliance from 2019. Feel free to…

Downloads
2
Likes
0
Rating
0
P
PrintablesLee

10inch (250mm) Rack SFX PSU (CoolerMaster V SFX GOLD 750)

2U SFX PSU Mount with place to mount ATX2ATX-N05 VER 005 (in my case modified to USB2ATX 😊) Dimesions like in "10 inch rack dimensions" on wiki (just changed 254mm to 250mm) I printed using: - PETG - 0.20mm - 4 walls - 20% infill -…

Downloads
0
Likes
0
Rating
0
P
Printables

Mikrotik hEX, RD2x0GS 10inch rack mount

Mikrotik hEX, RD2x0GS 10inch rack mount

P
Printables

TopPanels to close the gap for Modular 10inch Server Rack

Some Top Panels to fully close the gaps in the Modular 10inch Server Rack when using the topper and Handles. The standard is always 3mm thickness. But if you are usind the Multiboard Add-On, then you will need the wider 6mm frontpanel and…

P
Printables

7" Display Mount for 10inch rack

This 7" Display Mount for 10inch rack7" is designed in three parts so it can be printed on a 250mm wide bed. The 3 pieces have to be screwed together with screws and heat inserts.

P
Printables

10inch Rack Module RASPBERRY PI 3_4_5 Model V

10inch Rack Module RASPBERRY PI 3_4_5 Model V Work in progress: Content of this Thing can still change in the near future All trademarks, logos and brand names are the property of their respective owners

P
Printables

D-Link DGS-108 10inch Mini Rack shelf

Compatibility This rack shelf if design to accommodate a network switch D-Link DGS-108 , model EGS108E C2E to be precise. The D-Link DGS-108 switch has varied over the years, your model may have a different size ! Please check carefully…