1 / 4
HUNSN RS34c 10inch Rack Mount - 1U & 2U Versions — image 1
1 / 4

HUNSN RS34c 10inch Rack Mount - 1U & 2U Versions

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple 10inch rack mount for the HUNSN RS34c firewall.

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
100
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

HUNSN RS34c 10-Inch Rack Mount

A simple rack mount for the HUNSN RS34c firewall, made in two versions: 1U and 2U.

I bought this firewall for my homelab, but I noticed that there were no proper rack mount supports available for this specific model. Since I wanted a clean installation inside my 10-inch rack instead of leaving it loose on a shelf, I decided to design and make this mount myself.

This mount is designed for 10-inch network/server racks, making it useful for homelab setups, OPNsense/pfSense builds, and compact network racks.

Versions Included:

1U Version

The 1U version is the most compact option.

The firewall is slightly taller than a standard 1U space, so in this version it sticks out a little on the top side.

Because of this, it may touch other rack supports, shelves, or devices mounted directly above it. I recommend using the 1U version with a venting spacer above the firewall to give it enough clearance and airflow.

2U Version

The 2U version gives more space around the firewall.

This version is recommended if you have enough rack space and want better clearance, easier installation, and improved airflow.

Airflow Note

I added a hole in the support to help with airflow, especially if you mount an internal 8010 fan inside the firewall.

This should help the fan move air more effectively instead of being blocked by the rack mount support.

The upper heatsink fins can reach high temperatures during use, especially in a rack environment. For this reason, I strongly recommend adding an internal fan and leaving enough free space around the unit for proper airflow.

For the 1U version, using a venting spacer above the firewall is highly recommended.

Print Recommendations

Recommended print settings:

  • Material: PETG recommended, PLA+ also works

  • Layer height: 0.2 mm

  • Walls/perimeters: 4+

  • Infill: 25–40%

  • Supports: Depends on your print orientation

  • Brim: Recommended for larger parts

For long-term rack use, PETG is recommended because it handles heat and stress better than regular PLA.

Hardware

You may need standard rack screws for mounting.

I personally used the Rackmate T1 screws.

Tags