Search results: 13mm

Sort order

311 models

P
PrintablesHolzi

Drill Bit Holder 1-13mm (Bohrerhalter) to mount on French Cleat

This is a drill bit holder to mount on french cleat or sit on the work bench. You can add drill bits from 1mm to 13mm in steps of .5mm. On the back there are already 10mm deep holes for attachment to a French Cleat holder. (there´s a…

Downloads
2,168
Likes
235
Rating
4.83
P
PrintablesNiklas

Gardena Micro-Drip 1/2" - 13mm Connectors

Various connectors and an end piece for the 1/2" - 13mm Micro-Drip water pipes from Gardena. Depending on your water pressure you might need a hose clamp to secure it properly. If you want to connect your micro drip system to a garden…

Downloads
1,141
Likes
348
Rating
5
P
PrintablesHeine Sørensen

Drill holder 1-13mm (Metric)

Note !! this is a remix however I cannot find the source any longer. The model is possible to screw to almost anything , it has a groove in the top to storrage a special size drill if needed and have 2 slots in the top for center drill…

Downloads
1,111
Likes
169
Rating
5
P
Printablesbeekrbonkr

Microphone Boom Arm Desk Clamp Replacement - Scissor Mic Stand Clamp, 13mm Hole

A replacement desk clamp for scissor-arm microphone boom stands. If the original clamp on your mic arm broke or went missing, this is a printable substitute. The hole for the mic arm post measures 13mm. Files included Mic Stand Clamp…

Downloads
980
Likes
91
Rating
5
P
PrintablesShadow_964

G1/4 Barbed Fitting For 5mm to 13mm Hoses

BSPP G1/4 barbed hose fitting for hoses between 5 and 7mm of Internal diameter. It has a small recess to fit an O-ring with 17mm of external diameter and a maximum of 2 mm thick. The barbs larger and smaller diameters are, respectively…

Downloads
870
Likes
275
Rating
0
P
PrintablesEsKa11

Scratch Gauge 13mm wide ruler / Streichmaß für 13mm breites Lineal

Compatible with a 13mm wide ruler. Block is best printed laying on the reference surface. Bolt standing on its head. 0.4mm nozzle, 0.2mm layer Info: Old model I used to upload to Thingiverse in 2019.

Downloads
806
Likes
266
Rating
5
P
PrintablesFreddy-six

Gardena bend protection nut 1/2" / Gardena Knickschutzmutter 13mm

Based on Sound-Maker's idea, I designed a Gardena anti bend nut to prevent the hose from bending. (https://www.printables.com/de/model/4324-gardena-spannmutter-fur-12-schnellkupplung/comments/755396) Gardena has these articles also on…

Downloads
606
Likes
105
Rating
5
P
Printablesmatej

Garden Hose Connector 1/2" (13mm)

printed from PET-G, one body and 2 nuts. For body use brim, supports not required. if you need connector to 3/4" hose then set scale factor to 130% in X and Y coordinates for 1" hose connector set scale factor 200% in X and Y coordinates…

Downloads
556
Likes
67
Rating
4.33
P
PrintablesMKE Dan

Detail Sander 13mm wide

Compact detail sander with a 13 mm sanding width , designed for precise sanding in tight or hard-to-reach areas. Ideal for fine detail work, small parts, and controlled material removal. Cut Sandpaper Strip 13 mm × 183 mm (1/2″ × 7-1/4″)…

Downloads
487
Likes
98
Rating
5
P
PrintablesKophi

13mm Flux syringe plunger

Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…

Downloads
448
Likes
39
Rating
5
P
Printablesekoscape

Aquarium filter shrimp intake (13mm & 16mm) (12 models) (Round and hexagonal holes)

Filter intake to protect baby shrimp or fish fry from sucked in. Suits any piping that are 12mm or 16mm, 1 mm holes (Round and hexagonal). Models Filter 13mm (Height 55mm) - (Round and hexagonal) Filter 13mm (Height 79mm) - (Round and…

Downloads
436
Likes
70
Rating
5
P
PrintablesWermuth3D

RIS/Picatinny Rail Riser 13mm (Airsoft)

Used it for my own Airsoft M4. Works great and it is durable!

Downloads
389
Likes
97
Rating
5
P
Printablesekoscape

Aquarium filter shrimp intake 13mm (Round and hexagonal holes)

Filter intake to protect baby shrimp or fish fry from sucked in. Suits any piping that are 13mm, 1 mm holes (Round and hexagonal), 55mm height.

Downloads
376
Likes
84
Rating
5
P
PrintablesMartin

Drill Gauge Metric 1 - 13mm

Size 1 to 13mm Fit for Measuring Physical specification: 97 x 190 x 3mm 9.7 x 19 x 0.3cm PLA or PLA+ or PETG

Downloads
373
Likes
28
Rating
5
P
PrintablesGeoff

Chunky M8 Knobs (DIN type, 13mm head or nut)

Chunky knobs made for a snug fit with M8 hexagonal bolts or nuts. Modelled to work best with normal DIN standard fasteners (13mm across flats and head height 5-6mm to 6.4mm.) Initially made for using with the partially-threaded bolts…

Downloads
373
Likes
52
Rating
4.8
P
PrintablesKrencl

Gardena micro-drip 1/2" (13mm) pipe holder

Please like model, if you are satisfied.

Downloads
351
Likes
34
Rating
5
P
PrintablesKen226

1/4 Scale Rheinmetall-Borsig MG131 13mm Machine Gun set, for model FW190

This is a 25%, or quarter scale model of a set of MG131 machine guns, with mount and feed chutes. I designed this for a friend, who was building a scale RC FW190. Most of the parts will print fine without supports, but the mount will…

Downloads
344
Likes
37
Rating
0
P
PrintablesPrintyModels

Overengineerd 45° Led profile (13mm wide LED strip)

Hi! I designed this in my free time and would really appreciate it if you could leave a comment or share a make after printing it. It means a lot to me and gives me motivation to make more items :) Thanks! This modular LED strip bar is…

Downloads
334
Likes
40
Rating
5
P
PrintablesInvalid_Maus

Camping chair feet for 13mm leg (decathlon MH500 )

lost two feet of my chair in a trip, was already sinking into wet ground a bit before, found the original file and made the inner diameter smaller then removed the holes 2024/10/8 update: revisiting the file because I need to print a set…

Downloads
311
Likes
43
Rating
4.5
P
PrintablesPhil-ip

Coude 90° pour tuyau Gardena noir (enterré) 13mm

Coude 90° pour tuyau Gardena noir (enterré) 13mm Permet de raccorder un tuyau de 13mm à angle droit.

Downloads
294
Likes
21
Rating
5
P
PrintablesSky

Drill bit holder 9-13mm - wall mount

I tried to find the perfect drill holder for my needs and couldn't really find something that suits all my needs. Therefore I created one myself. This design fits drill bits from 9mm to 13mm in size. For sizes 1mm to 8,5mm see my other…

Downloads
293
Likes
39
Rating
5
P
PrintablesKemet

Xiaomi Mi Vacuum Cleaner G10 adapter/regular hole/standard hole/baby aspirator adapter/r13mm

Adapter for conversion Xiaomi accessories connector to standard - 26mm diameter (13mm radius) hole. works for Xiaomi Mi Vacuum Cleaner G10 I needed it for baby aspirator. PLA, PET, PETG works just fine. Simple, easy, ready to print.

Downloads
279
Likes
28
Rating
5
P
PrintablesMKE Dan

Bow Sander Large 13mm wide

My intent was to design a simple robust bow sander that was easy to load. 166mm (6.53") long sanding surface. Sand Paper 13mm X 225mm long (cutting template file included) Printed in PLA on a P1P .08 layer height 3 walls 15% infill No…

Downloads
268
Likes
66
Rating
0
P
Printableszz2012

Gardena Pipe Pegs 13mm

You can mount the Gardena MicroDrip 13mm system wherever you want. Thanks, Enjoy! Print Settings Printer Brand: Prusa Printer: MK3S Supports: No Resolution: 0,3 Infill: 70 or more Filament: Fillamentum CPE, ASA signal Category: Outdoor &…

Downloads
268
Likes
38
Rating
5
P
PrintablesMKE Dan

Bow Sander Small 13mm wide

My intent was to design a simple robust bow sander that was easy to load. 89mm (3.5") long sanding surface. Sand Paper 13mm X 225mm long (cutting template file included) Printed in PLA on a P1P .08 layer height 3 walls 15% infill No…

Downloads
254
Likes
50
Rating
5
P
Printablesreedx

M4 Cable Mount P-Clip - 12 sizes ( 2 - 13mm )

P Clips for securely mounting wires and cables using M4 fasteners. Available in sizes 2 to 13mm outside cable diameters. Ideally printed with a flexible filament. I print mine in TPU with a high wall count. PETG may also be suitable. Band…

Downloads
253
Likes
30
Rating
5
P
PrintablesLuckyMenace

1/2 inch / 13mm Irrigation Tube End Plug

Barbed end plug for run of 13mm irrigation tube / pipe - insert past the barb to stop water flow. Ensure you flip the STL file if using this - otherwise import the 3MF as this is the correct way around.

Downloads
253
Likes
34
Rating
5
P
PrintablesSebastian T

Gardena Microdrip 13mm Tube Holder

I used these brackets to replace the M16 pipe clamps I used to attach the 13mm tubing to the greenhouse foundation. The hole in the bottom is 4.5mm. I have printed it with PETG and 4 outer walls.

Downloads
245
Likes
27
Rating
4.5
P
Printablesreviloc

1/2 inch to 13mm barbed adapter

½ inch to 13mm barbed pipe adapter. I use this to connect my solenoid valves to the 13mm irrigation pipe which I use for the garden

Downloads
230
Likes
28
Rating
5
P
Printablesirreverend

Heltec V3 Mini Case (fits 13mm antenna)

Mini case for the Heltec V3, which fits a larger antenna which none of the other mini type designs seem to. Be aware if your print tolerances aren't the same as mine you might need to sand the side where the bottom of the screen fits in.…

Downloads
227
Likes
34
Rating
0
P
PrintablesFelix Loh

13mm socket wrench, 120mm long

I have lengthened the existing version to 120mm. Ideal for installing mixer taps. Printed with PETG.

Downloads
226
Likes
8
Rating
5
P
Printablesvespaholic

Bialetti Moka Coffee Stand for 3 cup Moka 13mm stem

The original didn't fit my 3 cup model so I just resized the original up about by 1/8th so that it would fit the 13mm stem of my moka pot no other changes have been made. Original by Jayuk. Print Settings Printer Brand: Creality Printer:…

Downloads
219
Likes
26
Rating
5
P
Printableshunger

M8 (13mm) nut adapter

M8 (13mm) nut adapter. I use for mower (handle folding). I printed model from PETG. czech: Adaptér matky M8 (13mm). Používám na sekačce (sklápění rukojeti). Tiskl jsem model z PETG.

Downloads
202
Likes
30
Rating
5
P
PrintablesMAHWE

Kappe für Rohr z.B. Stuhlbein Durchmesser Innen 13mm, außen 16mm

Schützt ihren Boden vor Schrammen. Gedruckt aus PLA, PETG oder TPU je nach Anwendung.

Downloads
201
Likes
10
Rating
0
P
PrintablesTiebie

Gardena 13mm (1/2") micro drip hose stake

Soil stake for 1/2 inch (13mm) Gardena micro drip hose. Quick and dirty Tinkercad design. Constructive comments appreciated. Prusa i3 MK3s 56 min for 1 with standard slicer settings Prusa mini fits 6 (4h18 with draft settings) Print…

Downloads
196
Likes
25
Rating
0
P
Printablesdsfrancis

Multiboard - 13mm Small Thread T-Bolt

A basic 13mm small thread T-Bolt for the Multiboard system.

Downloads
187
Likes
7
Rating
5
P
PrintablesB0L1V3R

A holder for screwdrivers with 9mm and 13mm diameter

The mounts were printed with a layer height of 0.3. in PETG. No supports are required.

Downloads
186
Likes
32
Rating
0
P
PrintablesNiklas

Gardena to 1/2" - 13mm hose connector

An adapter from Gardena connector to a 1/2" - 13mm hose. You can use the ring seal of an original adapter but you can also print one with TPU (file included). Variant Gardena connector ½" - 13mm hose connector 1 1x 1x 2 1x 2x 3 1x 3x 4 2x…

Downloads
175
Likes
26
Rating
0
P
PrintablesTperroneDesign

13mm to 18mm Model Rocket Motor Adapter

This is a two piece 13mm to 18mm motor adapter. It works with Estes 13mm motors, and you can use it in lightweight rockets that use 18mm motors. Print in ABS for better heat resistance and lighter weight. Use a brim when printing. Use a…

Downloads
175
Likes
28
Rating
0
P
PrintablesDian

13mm hose connector

hose connector. like Gardena 1514-23

Downloads
171
Likes
25
Rating
0
P
PrintablesOACDesigns

Garden Hose Quick Release Connector 1/2" (13mm)

Remix of the original model to combine with the male part of a quick release coupling lock. Watch out, the fingers are fragile and can snap off easily. Print with them facing down, with a brim. Best to use PETG for outdoor use. The nut is…

Downloads
170
Likes
27
Rating
5
P
Printablesdiidjej

Garden Hose Y - Connector 1/2" (13mm)

Printed from PETG. Printing position as in picture with two connectors down wards. The connector “fingers” are a bit fragile and can easily snap, but if handled with care it's a very tight fit and doesn't leak. I actually had to use some…

Downloads
169
Likes
39
Rating
0
P
PrintablesPetrod

13mm Poly Pipe Clamp (remix)

If you don’t want to spend a fortune on 13mm poly pipe clamps from the store, then this is a real cost saver. It prints a useable hose clamp with a 0.4mm nozzle, but I expect it would print a much stronger (teeth-wise) item with a 0.2mm…

Downloads
168
Likes
23
Rating
5
P
PrintablesKen226

Voron Trident or 2.4 XY Bridge Cable Chain Anchor, Raised 13mm for Backers

Print using the same material and settings as the default Voron parts. Uses the same screws. I included the .stp in case someone needs it changed.

Downloads
165
Likes
16
Rating
5
P
PrintablesRedFrez

Test Tube Cap (13mm & 16mm provided)

I got inspired to organize my electronic parts in test tubes, but wanted a better cover for them, that would eventually allow for labeling/customization. The caps provided are for a 13mm tube, 16mm tube, and the 16mm with test mmu label.…

Downloads
163
Likes
4
Rating
5
P
PrintablesDanAndersen

Diffuser/Flow-Resistor for Juwel Bioflow One Aquarium outlet (13mm)

The Juwel Bioflow One aquarium filter and heater combination, utilizes an O2 diffusor which narrows the 16.5mm outlet to a 10mm “jet” to inject air into the water. One downside can be that this jet creates a strong current in the fish…

Downloads
153
Likes
14
Rating
0
P
PrintablesPhil-ip

Bouchon tuyau 13mm / Hose plug 13mm

Plug for Gardena underground pipes (or black irrigation hose) of 13mm Test for strength depending on the type of filament used and the orientation when printing the part.A horizontal print will be stronger but less accurate for example.…

Downloads
148
Likes
9
Rating
5
P
Printablesk2thestank

Nerf Dart Cutter Template 38x13mm

just print and cut simple as that! Dart Tips: please print in TPU anything else and you risk serious injury or damage to anyone or anything the tips hit. (meant to only print and glue onto the cut ends for practice or simple shooting to…

Downloads
142
Likes
35
Rating
4.5
P
PrintablesWiseone

Spanner/Wrench Carrier 03 (07-13mm)

My spanner collection inside my portable toolbox was always a mess. Each spanner dispersed in the toolbox box and hard to find. My solution to the spanner mess is to bring them together into this 3D printed spanner carrier. This 3D…

Downloads
141
Likes
18
Rating
4.5
P
PrintablesLincDaPro

13mm hinged hose clamp - ANTI KINK

I printed it on my X1C at 0.12mm high quality.

Downloads
140
Likes
13
Rating
5
P
PrintablesCmarlow

Drill Bit Tray 1-13mm

A Drill bit tray for 1-13mm bits. (25) Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PLA PLA Category: Tool Holders & Boxes

Downloads
138
Likes
14
Rating
0
P
PrintablesMateo Deal

Gridfinity Drill Bit Set Holder 1-13mm (With Raised Labels)

Added raised labels to Flash72 's Gridfinity Drill Bit Set Holder. There was no room on the 4mm, 8mm or 8.5mm slots so you'll have to use context clues sorry guys. Original:…

Downloads
136
Likes
13
Rating
5

Gridfinity Dremel polishing disk holder - 26 mm + 13mm / 1 inch + 0.5 inch

Gridfinity Dimensions: 1x2x3U 2x2x3U Remix The model was made with OnShape and should be available to all https://cad.onshape.com/documents/d2b1533fdd4339235a0aeaef/w/dfd6302d8036a7602175fc06/e/bd297a3feee5e0f1c54b42ff

Downloads
135
Likes
29
Rating
5

APFSDS Mod for 13mm Barrel (Nerf Barrel) V4

APFSDS meaning: Armor Piercing Fin Stabilized Discarding Sabot, or: A certain type of ammunition. Directions: Print the three sabots and the penetrator, and when finished put the three sabots around the penetrator and put fins down into…

Downloads
132
Likes
12
Rating
5
P
PrintablesTommi

Hose union DN10 (G3/8") - 13mm

I have printed these from petg and pctg, and both seem to work fine. Additionally, you also need a roughly 16mm x 2,5mm (5/8" x 0,1") O-ring. PS. If you are using a hose clamp to secure the connection, be careful not to overtighten the…

Downloads
129
Likes
28
Rating
5
P
PrintablesLotfyA

Winged Socket Wrench 13mm with conversions

Introducing our Winged Socket Wrench for M8 Nuts (13mm size), a must-have tool for any handyman or mechanic. This 3D model combines convenience and versatility, making it an indispensable addition to your toolbox. Features: Effortless…

Downloads
129
Likes
10
Rating
0
P
Printablesjlovega

Modular enclosure 1/2" (13mm) PVC

1/2" (13mm) PVC parts to build enclosures or shelves Parts: pvc clip: clip to hold fabric or plastic on the tube pvc-corner: to build a door or a frame pvc-3-corner: brackets to hold the corners pvc-table: clamp for 4mm board, can be used…

Downloads
128
Likes
51
Rating
0
P

Flutted Pastry socket ( 6 tooth: 4mm, 6mm, 7mm, 9mm, 10mm and 7 tooth: 12mm, 13mm)

I just need some pastry socket to make some cakes during the shutdown. So I made a serie. I have not used all yet. Material Quantity 8g Dimensions 35 x 35 x 40

Downloads
128
Likes
20
Rating
0
P
PrintablesVousaty_

Bending mandrel for 13mm hard tubes 90 degree

Works fine with both acrylic and PETG tubing, easy to use, perfect 90 bends. 2cm bend radius.Enjoy

Downloads
126
Likes
15
Rating
0
P
PrintablesNicerSlicer

13mm 1/2 Inch End-Plug Cap (Gardena Micro-Drip 13mm)

13mm Endstück für 1/2 Zoll Leitung (z.B. Gardena Micro-Drip 13mm)

Downloads
124
Likes
9
Rating
0
P
PrintablesJ Lake 3D

13mm Reversible Ratchet Wrench

This one has not been tested yet but is using the same design as the 14mm which has been tested. I made this 13.4mm inside. Tolerances are 0.2mm so print this first- https://www.thingiverse.com/thing:3569489 More sizes to come. I…

Downloads
123
Likes
27
Rating
0
P
PrintablesNikki81

p clip for 13mm od 13mm flexible conduit

p clip for 13mm od 13mm flexible conduit takes a m5 bolt

Downloads
121
Likes
7
Rating
0
P
Printableszz2012

Gardena hub 13mm to 4x 4,6mm

Split Gardena MicroDrip 13mm to 4x 4.6mm. Thanks, Enjoy! Print Settings Printer Brand: Prusa Printer: MK3S Rafts: No Supports: No Resolution: 0,2 Infill: 70 or more Filament: Fillamentum CPE, ASA signal Category: Outdoor & Garden

Downloads
117
Likes
23
Rating
0
P
PrintablesMatěj Smejkal

cover for 13mm nut

cover for 13mm nut ( originaly on top of oarlock)

Downloads
116
Likes
4
Rating
5
P
PrintablesSteven Liston

Rolling pin Spacer .5" or 13mm

Spacer for rolling pin to allow you to create .5" or 13mm thick dough

Downloads
116
Likes
4
Rating
0
P
PrintablesBREACHERCAT

Bambu Lab X1C / X1 Touch Screen Low Mount V2 (Drop 21mm or 13mm)

Currently, the files are V2, the description will be updated ASAP This mount lets you lower your screen and provides more clearance on the top side (level with top glass or handle). It offsets the mounting point 14mm outward, then 21mm or…

Downloads
114
Likes
24
Rating
0
P
PrintablesBasementLAB

Greenhouse film outdoor Clip Ø 10/12/13mm - Molletta fermateli serra da esterni

Greenhouse Outdoor Pole Clip Ø 10/12/13mm - Molletta fermateli serra da esterni Greenhouse Film Clear Polythene Plastic Sheeting Garden DIY Material Cover Greenhouse Roof Resize to adjust dimension If you download/enjoyed this file,…

Downloads
114
Likes
14
Rating
5
P
Printableshjembaek

Allen (Hex) Key 11mm, 13mm, 15mm and Screwdriver with 15mm Allen (Hex) Key shank

Non-standard metric size Allen keys: 11mm, 13mm and 15mm. Screwdriver with 15mm Allen Key Shank Combines screwdriver functionality with a 15mm Allen key. Allen Keys: 11mm, 13mm, 15mm Perfect for hex bolts and screws. Print settings Layers…

Downloads
114
Likes
2
Rating
5
P
PrintablesRowan

13mm Pipe Clip

Simple clip for 13mm poly garden pipe

Downloads
112
Likes
14
Rating
0
P
PrintablesCdR

Gardena Master Unit 13mm adapter

Simple to print without supports. PetG preferred.

Downloads
111
Likes
8
Rating
0
P
Printablesmxp

Foot switch topper adapter 13mm-10mm

Use 10mm toppers on 13mm foot switches, like on the TC electronic Plethora guitar pedals.

Downloads
110
Likes
12
Rating
0
P
PrintablesKrencl

Gardena micro-drip 1/2" (13mm) pipe holder with socket for drip / spray nozzle

Please like model, if you are satisfied. As main holder use long version of model. Short version is getting from land easily, but is usable as balancer. Socket compatibility checked with: Gardena Adjustable Endline Drip Head (1391-20)…

Downloads
109
Likes
22
Rating
0
P
Printablesm_collectable

Hanging Slip Over Hook J Shaped - Sizes 12mm 13mm 14mm 15mm 16mm - for Door Cabinet Shelf Wall

A basic J shaped hook meant to be placed or slipped over top of a rail, cabinet door, or shelf wall. Great to hang items such as hats, keys, coats, etc. Five different models with gap widths to fit over wall thickness from 12mm to 16mm.…

Downloads
106
Likes
23
Rating
5
P
PrintablesBoos

13mm description clip for Customizable Benchy Shelf

I printed some of the original clips and noticed, that my label printer stickers won't fit them. So I enlarged the original 10mm ones to 13mm for a perfect fit.

Downloads
106
Likes
35
Rating
5
P
PrintablesHJ Visions

HJV Hinge 13mm

These hinges are made for acrylic door. I designed parts for IKEA Lack enclosure and it needed hinges, where doors are 13mm depth from feet surface. Measurements: Height: 50mm Width: 60mm Holes: 4,5mm Countersink: 8mm Female part depth…

Downloads
105
Likes
13
Rating
4
P
PrintablesJack Bailey

Metric Socket Holder (5mm - 13mm) for HSW

Holds 9 sockets, 5mm to 13mm, with 3 inserts for the HSW.

Downloads
105
Likes
13
Rating
5
P
PrintablesGrumpyTanker

13mm ID Cable Clip for 2020 Extrusion

All the cable clips I had downloaded were too small. I'm using some woven flexwrap around my cables, so they're a bit fat. This clips into the extrusion channel. Not super tight, but not loose either. 13mm inner diameter, 16mm outer…

Downloads
104
Likes
9
Rating
0
P
PrintablesLukas

8-13mm Hose Adapter

Story: I needed to connect the hose of my mini pump to a regular 13mm hose to be able to attach a Gardena quick connector . After the first version, I have added some chamfers so you can print without any support. If you have any trouble…

Downloads
103
Likes
16
Rating
0

AIO comb for Lian Li 13mm tubes

AIO comb to fit Lian Li 13mm hoses.

Downloads
102
Likes
10
Rating
0
P
PrintablesFizzio55

Acoustic wall panel shelf for 13mm gap between vertical slats, and 13mm slat depth.

I really liked the original design by NickiDotDK, but it did not fit the requirements for the make of wall panel I was due to fit on my wall. With a sample of the Trepanel brand of wall panel I determined that the width needed was 13mm…

Downloads
101
Likes
26
Rating
5

Mini keychain 10mm and 13mm wrench

The mini keychain wrench for 10mm and 13mm nuts or bolts

Downloads
100
Likes
6
Rating
5
P
PrintablesMercys Artworks

Self designed body for Axial SCX10 313mm

I play a little with the thinkercat and designed a body for an Axial SCX10

Downloads
99
Likes
12
Rating
0
P
Printableszz2012

Gardena Connector G1 to 13mm

Allows you to connect the Gardena microdrip 13mm system to an electric water valve. Thanks, Enjoy! Print Settings Printer Brand: Prusa Printer: MK3S Rafts: No Supports: Yes Resolution: 0,2 Infill: variable Filament: Fillamentum CPE, ASA…

Downloads
96
Likes
12
Rating
0
P
Printablesirohlfs

Gardena Microdrip (MDS) 13mm Connector

Connector for 15mm Gardena MDS Pipes. 2 O-Rings are needed. (9 mm x 1.7mm)

Downloads
95
Likes
14
Rating
0
P
PrintablesOK3D

Filament Spool Wall Mount/Holder/Rack - VAROE Remix 13mm

This is a remix of @VAROEsolutions model to use 13mm dowel Instead.

Downloads
94
Likes
6
Rating
0
P
PrintablesEd Brentnall

Multiboard Ryobi BCL14181H charger 13mm Flat T-bolt mounting bracket

This is a sturdy Multiboard mounting bracket for a Ryobi single battery charger (model BCL14181H). The battery charger has mounting holes 105mm apart and the posts on this model, although small, are just about strong enough to hold it if…

Downloads
93
Likes
8
Rating
5
P
PrintablesNeso

13mm inner fender nut

Plastic nut for mounting inner fender. Inside diameter - 4mm Rim diameter - 30mm Wrench size - 13mm Infill - 100% Inside hole may need to be drilled

Downloads
91
Likes
16
Rating
0
P
PrintablesAngleartig

Cranked Drill Bit ø13mm Gekröpfter Bohrer

ein kleines Spassprojekt. Mit diesem Bohrer ist es möglich den Kopf der Bohrmaschine beim Bohren auszugleichen Viel Spass beim ausprobieren.

Downloads
90
Likes
12
Rating
0
P
PrintablesSpegelius

Cable tray (30mm x 13mm)

So couple of years ago I got fed up with various ethernet cables around the house and decided to do something about. I already had few bits and pieces of cable trays I had purchased from hardware store, but since the only option for…

Downloads
89
Likes
19
Rating
5
P
PrintablesGarrett Kinsman

CalThermo 13mm Wrench

13mm wrench for polymer bolts! Printed in Glass filled Nylon with a large brim for success

Downloads
88
Likes
7
Rating
5
P
PrintablesDario Cairoli

Bosh Professional PointTeQ Set 1mm to 13mm inlay for Quick Setup Drill Depth Guide (no tools required)

This is an inlay for Bosh Professional 1mm to 13mm Drill Bit PointTeQ Set. It accepts Quick Setup Drill Depth Guide by Highrise Workshop.

Downloads
88
Likes
22
Rating
0
P
PrintablesPascal.p

Gardena 13mm hose clip

Print in ASA for outdoor use. you might get away with PETG or even PLA, but PLA will bend in the summer if in direct sunlight.

Downloads
87
Likes
7
Rating
5
P
PrintablesMrStolarsky

Gridfinity for Wera Sockets 5.5, 6, 7, 8, 10, 12, 13mm

This Gridfinity holder is designed for the seven 1/4" sockets from Wera Tool-Check with 5.5, 6, 7, 8, 10, 12, and 13mm sockets. It takes 1x3 space on the grid. I have another design for Bicycle Tool-Check with spaces for 5.5, 6, 7, 8, 12,…

Downloads
86
Likes
19
Rating
5
P
Printablesgipegope

Porsche 997 windshield wiper cap 13mm

911 997 windshield wiper cap to cover up the 13mm hexagon head screw High fidelity, for a clean font print with 0.2 nozzle

Downloads
86
Likes
10
Rating
0
P

Plain pastry socket ( 4mm, 6mm, 7mm, 9mm, 10mm, 12mm, 13mm )

I just need some pastry socket to make some cakes during the shutdown. So I made a serie. I have not used all yet. Material Quantity 8g Dimensions 35 x 35 x 40

Downloads
86
Likes
14
Rating
0
P
PrintablesBenson Samuel

No Support Easy Print Aquarium Planter - 4-13mm

No Support Easy Print Aquarium Planter - 4-13mm

Downloads
85
Likes
13
Rating
5
P
PrintablesMythmon

2020 Extrusion 13mm velcro

The clip can be slotted into 2020 extrusion from the side, and then rotated to lock them in place. They can be quite stiff to get in, I used an adjustable wrench. I've included a 3mm hex wrench socket that may also work to turn them into…

Downloads
84
Likes
13
Rating
5
P
PrintablesKen226

Voron Trident / 2.4 Toolhead Cable Chain Anchor Raised 13mm

This has a built-in support that should easily snap off after printing.

Downloads
81
Likes
5
Rating
0
P
Printablesirohlfs

Gardena Microdrip (MDS) 13mm to QuickConnect Adapter

Gardena 13mm MDS to QuickConnect Adapter. useful as replacement for the pressure Limiter when used with low pressure water supply e.g. garden pump. 2 O rings are needed 9 mm x 1.7mm and 10.6mm x 2.7mm (As for MDS 13mm and QuickConnect)

Downloads
80
Likes
11
Rating
0
P
PrintablesMajk

Gardena Micro Drip 13mm Hose Holder 35cm (XL)

So… I decided to roll with the Gardena Micro-Drip System, but because I like to make life harder and more fun, I’m hanging it in mid-air like some kind of hydroponic wizard. That’s why this holder is long enough to double as a lightsaber…

Downloads
78
Likes
22
Rating
0