PC fan grids 140mm
PC fan grids for 140mm fans 3 styles: hexagon hexagon 2 sun
- Downloads
- 703
- Likes
- 94
- Rating
- 5
518 models
PC fan grids for 140mm fans 3 styles: hexagon hexagon 2 sun
I’ve seen that Solar System Lithophane Planet Lamp Collection by @FritzPeppone is lacking my favorite moon so I decided to add one. Moon is roughly 140mm so it’s compatible with Prusa mini and Bambu Lab A1 mini. BTW this model got M75x4…
A simple adapter for a flush fit between Xiaomi HEPA Filters for Mi Air Purifiers and Arctics excellent BioniX P140 Fan
A common problem with AiOs and modern CPUs is the lack of VRM cooling around the CPU socket. With this adapted cap you can mount any 92/120/140mm fan (with a 82,5/105/125mm hole spacing) to ensure sufficient airflow over the VRM…
Bohrschablone 140mm PC Luefter fuer DIY Projekt - Virtueller Pinball (VPin) Für meinen Virtuellen Pinball (Flipper) habe ich 140mm PC Lüfter verbaut. Abmessungen: 140mm x 140mm Da dies ja PC Standards sind, können Sie auch auf andere…
The fan mount was designed to solve the issue of insufficient air conditioning and the need for cooling on hot days. Its minimalist design is all that's necessary for the fan to operate effectively. To secure the fan, you can use either…
EN : Some time ago I was looking for a box for my needle files and found a nice model from Clivebradshaw and remixed it with an label in 4 languages , see:…
These fan spacers can be used for 120mm and 140mm computer fans. Both fan size spacers come in three thicknesses: 10mm, 15mm and 25mm. The mounting holes are chamfered on one side and recessed on the other. See the second image for the…
Inspired by MajorHardware, i redesigned the whole thing with Airflow in mind, the design works really great, it delivers a lot of air movement with minimal noise. You can mount the fan either by screws or like me just with 4 zipties, the…
I needed more places to put hard drives in my home server. I found the mounts by sk_2002 and xcooling, but after printing the 4 bay version, I realized that my case had a 140mm fan mount on the bottom. some redesigning in sketchup, and…
A standard 140mm fan protection grill I designed to place over fans fixed with rubber screws. Print instructions The rubber screws could be a little too tight for you (depending on the precision of your printer). You can drill the holes…
All fans have 4.2mm screw holes and fit within the dimensions of a standard fan. Screw spacings are also standard. 80mm, 71.5 hole spacing 120mm, 105 hole spacing 140mm, 124.5 hole spacing The Hexagon pattern is 12mm hexagons side to…
After I finished the Simple Perfect Desktop Fan Stand I wanted to make one that is adjustable. So here it is. Features No Supports / Super easy print The angle locks every 5 degrees Customizable text at the front No additional hardware…
100mm x 140mm bin with 3 full size hex attachments.
This silicagel container holds 250g and is a perfect fit for the NATO ammobox size 7 (~48x24x37cm). Dimensions of the container are: 65 x 140 mm. It requires a somewhat precise printer for the threads (you should be able to reach a…
Noctua design high efficiency fan grille for 140mm fans. Update : Modified corner radius to 8mm.
a rugged box, enjoy. Use 2mm spokes as hinges. Used BumpMesh by CNC Kitchen for texturing https://bumpmesh.com/
The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…
This fan duct will redirect air flow from 120mm/140mm fan at an angle. For example this can be used On the back of your PC to the VRM area on your motherboard. This is required when you're using water cooling, which could reduce cooling…
Reduce noise PC fan spacer 120mm / 140mm 5mm thick
This is a dust filter for a variety of fan sizes. The printed mesh blocks dust and debris from getting stuck in a fan. You could add a colour change in the second layer to create a beautiful effect. Make sure you are printing with a 0.4mm…
I made a fancy fan cover which is designed to optimise airflow. Testing video below explains more! You might also be interested in the 140mm fan insert for tights/pantyhose .
140mm Spacer für Gravitrax Hier findest du noch andere größen https://www.printables.com/de/model/511208-gravitrax-spacer-50-100mm if you like my model please leave a like there
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
This is a super handy clip for the pantry, freezer and just other bags. We use them for chip bags, and freezer stuff. I print them using PLA+, and we have clips that we are still using that have lasted 6/7/8 years in the freezer. And are…
I designed this Adapter to Mount a 140mm Radiator on a 120mm Mount. I can also be used to Mount an 120mm Fan on a 140mm mount. Made an Test_ Piece as request. Instructions .2 mm Layer Height .8 mm Shell Thickness .6 Bottom/Top Thickness…
There is little clearance where the base attaches to the grill piece, so consider using exclusive slicing tolerance or they might require some post-processing.
NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems: https://noctua.at/en/na-savp1
140mm Fan to 100mm Duct Adapter A simple, no-supports adapter that connects a standard 140mm fan to 100mm (4") ducting. Great for fume extraction, workshop ventilation, and general airflow projects. 🔧 What it's for Soldering / 3D printing…
Diese Halterung ist für die Zusatzkühlung der Deye Hybrid Wechselrichter 8, 10 und 12 KW LP 1 - https://www.amazon.de/dp/B0CCRPXSZY?psc=1&ref=ppx_yo2ov_dt_b_product_details LP 2 - https://www.ebay.de/itm/403863623678 Netzteil -…
A remix of The3Designer 's 120mm Angular Louvre Fan Grill to fit the 140mm fans. Scaled to 140mm size and added appropriate screw hole locations. If you like the model, support the original creator using his affiliate link.
Made in OpenSCAD 2021.01 Verified that the model works for 80, 120 and 140mm fans, if you decide to build the grill yourself, make sure that your mounting hole spacing is correct. The .scad file contains a few links for datasheets about…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 Design These items are made to fit to standard 140mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 100mm flexible ventilation pipe with a clamp. There are two different looks available.…
This is a Remix from Major Hardware Deskfan, but with Laminar Flow. With this you will get a gentle Airstream, like a Dyson Fan. Happy Printing. Best to print it with 100 infill Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
Converts a 140mm small spool to 200mm diameter. This is the standard size for 3DJake small spools. Many thanks to bkilian for the original one and providing the Fusion 360 file to be able to adjust to this size easily! Original model with…
Overview: This is 3D-printed desk fan, designed to seamlessly blend functionality and style. Built around a powerful 140mm computer fan, this versatile device is perfect for keeping you cool in the office or for fume extraction during…
Well I bought the wrong cards, and loads of them. Turned out I needed 170mm for my steel target. So I made my own 140mm box. Indestructible by 6mm plastic BB's. I've been using it with 4,5mm steel BB's (at 3 joules) and it shows, although…
140mm fan to 120mm fan adapter PLA - 210/60 0.20 - layer 100% - infill
Those are great clamps, i'm using it everytime i use my CNC. Enjoy :) Edit: Added a V2 140mm clamp as requested Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 50 Filament: sunlu PLA…
These are both blanks, and with the original “CORSAIR” text. Fits the following fans in both 120mm and 140mm: RX RGB: https://www.corsair.com/p/case-fans/co-9051017-ww/icue-link-rx120-rgb-120mm-pwm-single-fan-expansion-co-9051017-ww RX…
Has a slightly better lift to weight ratio than the original 3 blade version and less flex
Made some remix,and modify a 14cm version
Used these to connect some of my Arctic P14 Fans. If you want to hang them, it's better to use these Connectors on both sides (top&bottom) - so to connect 2 fans you'll need 4 Connectors, for 3 fans you'll need 8 and so on. You can use…
Use my 120mm to 140mm adapter for the reverse configuration. This model is also uploaded on my Cults3D page.
This parametric fan grill model allows you to generate fan grills of any standard size with consistent styling. You mostly have to choose the size of the fan, the thickness of the grill, and generate an STL file with OpenSCAD. You can…
Have some fun shooting your own targets They are 139x139mm just to be sure they fit As we say in Sweden (Sorry, dosen't translate well to english): Skjut inte upp till morgondagen det du kan skjuta ner idag!
After years of trying to avoid solder fumes I found it time to design and print my own extractor arrangement. Initially the idea was to produce a desktop located unit, but due to space restrictions and consequent positioning issues, I…
Fan mount for the Ncase M2 (inverted layout) There are two different designs available: ITX (recommended): The fan cutout is not shifted. This allows an easier routing of the GPU power cables. MATX: The fan cutout is shifted towards the…
140mm fan grill remix from Noctua 120mm fan grill
Needed a lamp post to keep my snowman company, so I sketched one I could use for some LEDs.
This is a replacement bottom plate for the Minisforum MS-01, designed to accommodate a 140mm fan for improved cooling. The plate features precise cutouts and mounting points, ensuring easy installation and optimal airflow. To complete the…
I wanted a box with a clean look that presents the litophane prints nicely by giving them a backlight. The box could also be used as a nightlight. One side has a round indentation to feed a cable through. In the pictures you see me using…
Installing a radiator in my case didn't leave enough room to mount a 120mm fan in the correct position, so I designed this bracket to fit a one in the little space left. Two brackets extend a 120mm fan to 140mm and add 4mm in thickness.…
A simple fan mount for 120x120x 25 mm or 140x140x 25 mm pc fans. Don't use fans with a depth greater than 25mm! Thinner is fine! You'll lose 10mm Z travel, but on the other hand you'll have much higher chamber temperatures. Due to the…
A hexagonal fan grill for 140mm fans Designed by me in Fusion 360
This spacer is designed to maximize airflow with minimal noise impact, almost no added noise compared to running the fan unrestricted. I recommend using at least the 20mm version to ensure enough clearance for optimal airflow. 120mm: •…
I was looking for an adapter to allow me to use a 140mm PC fan to help vent an enclosure for when I start using my 10w laser on my Ender 3v2. I printed one from on here, but the walls of the duct were very thin and were not at all sturdy.…
Adding 5x 140mm fans with two 16x20x1 filters, giving it a large surface, makes noise levels virtually undetectable when running at max 12v. I made 3 of them so far. If I was to change something it would be to replace the panels screws…
Low material fan adapter with integrated screw holes for usual self-tapping fan screws. Print Settings Supports: Doesn't Matter Infill: 100 Category: Office
140mm Fan Cover. It still needs some work - it produces turbulence flow -> a little bit of noise...
This LED Lithophane Globe contains 4 Nativity Scenes. It has a compartment to house a remote control LED light. About the Origins of this LED Globe: The lithophane was generated using the awesome Lithophane Maker website. The four images…
There are many radiator boosters. This one is for radiators with 140 mm inner width and 120 mm fans. You can use up to 4 radiators. The booster consists of two components: controller holder (need 1 print) fan holder (need 1 to 4 prints)…
PCIe bracket for your PC case to mount a 140mm FAN to cool down your PCIe expansion cards.
140mm Fan spacer. 5mm high. 5mm Holes. F3d uploaded if you need to change anything.
I wanted to eliminate an audible hum I was hearing from a couple of my P12s, so I designed this 2mm dampener. You could use these with any 120mm fan, of course, but the corners are cut to match the P12 series specifically. There are 2…
Adaptor for Mounting a 140mm Fan on the Bottom of the Case where the shroud is normally located. Printed in DasFilament PETG Black.
You may be thinking - another front fan mount?… Yes, though this one is different from all the others I have seen. I personally didn't like the fact other designs added an additional section in-between the front plate and case.…
A scaled up version of the Noctua NV-AA1-12 Airflow Amplifier with mounts to work as a desk fan. The legs can also be modified as needed to attach to a wall etc. There are 2 versions of the legs which pivot off the main body, and are…
Design These items are made to connect 100mm flexible ventilation pipe to 140mm flexible air conditioning pipe with a clamp. There are also two sizes available. The short variant has a 30mm section to clamp the pipe each end and the…
Ich habe den 45 Grad Fan Direktor mit dem Unterbau des Noctua Fan Gehäuse genommen und miteinander verbunden. Somit hat man die Möglichkeit, sie zu schrauben oder so wie ich es gemacht habe, mit Magneten. Die Magneten erlauben eine…
I made this for a DIY enclosure. It uses a 140mm computer fan and has an adaptor that goes to 3 inch ducting. I attach the ducting with a hose clamp. The exhaust works decently if you crank up the speed on the fan. I printed out of PLA+…
This was designed specifically for the Thermaltake Tower 300 Computer case to stop your fingers and cables from getting caught in the fan blades when taking the top panel off. This can also be used for the optional rear fans connected to…
Description Hi everyone! This is my custom 3D printed enclosure for the BC-250 mining card / Bazzite gaming pc. I designed this because I wanted a case that fully encloses the board along with the PSU, rather than having parts hanging…
A fan shroud inspired by the one on Seasonic PRIME TX-1600 Noctua Edition. I have not been to Computex 2024 myself. I found a photo of it and made this. 40mm, 60mm, 80mm, 92mm, 120mm and 140mm versions. If someone need other sizes, send…
Servus, Auf dem PC Case Markt gibt es nahezu unzählige tolle Gehäuse. Wenige aber nur mit metrischem Gewinde. Habe mich für das Little Devil V8 von LD-Cooling entschieden. Wer ebenso dieses Gehäuse sein eigen nennt hat vermutlich die…
Just a basic remix for a part I used to block off unused fan ports on the top of a PC case.
This is an adapter for a grow tent air intake. The diameter of the intake is 100mm. The adapter fits a 140mm PC case fan. The screw part is needed as a counterpart to prevent the adapter and fan from slipping out of position. Printed…
PC Fan Grill with Samurai Logo – Cyberpunk 2077 “Don’t follow me, I’m lost too” – bring some rock chaos into your PC! A unique fan grill model inspired by the legendary band Samurai from Cyberpunk 2077. Perfect for fans of Johnny…
A small cable channel/raceway 18mm x 16mm used to hide and run a few small cables on the side of my lack enclosure. You can change the height once you drop it into your slicing software. You can also combine a bunch of these to make one…
Base coeur pour panier en crochet de 140mm de coté. Composé de 33 trous circulaires de 10mm. Hauteur de 5mm mais modifiez si vous le souhaitez, à partir de 3mm c'est sufisament rigide. Heart crochet basket base of 5.5" lenght. 33 holes of…
Printed with PLA Layer high: 0,25mm Infill: 18% Gyorid M4 screws: 3x 12mm, 3x 25mm 5x M4 nut 8x fan screws Working with AC DC 12V 2a Adapter - PWM Controller (0-100% controlable) - 2 fans connected in parallel
Designed around the 2018 intel Mac mini that runs loud, I remove the black plastic bottom it just pops right off the 5v Noctua fan flows air through the mac keeping it cool and quiet. I have made 3 versions with different position and…
Bottom plate to replace the original one with a mount for a 140mm fan, together with a hole to pass the cable inside the unit. Original plate used as base for the design. 2 small supports are needed at the connection to the front plate of…
Use my 140mm to 120mm adapter for the reverse configuration. This model is also uploaded on my Cults3D page.
140mm version of Noctua's fan grill
This bracket for the Thermaltake Core P3 with the curved or flat glass side panel allows an additional three 140mm or 120mm fans to be mounted or any 120mm, 240mm, or 360mm radiator at the top or front of the case. The only other parts…
This is a remix using original author's FreeCad file. A rest for your spoons and other utensils during cooking. I got some large cooking spoons, that needs longer spoon rest. This model is 140mm long and 95mm wide, with tree "slots".…
I wanted to mount a 140mm fan to my BD770i for additional air flow. However, the included bracket only allows for mounting of a 120mm fan. This mount allows a 140mm fan to be mounted offset to the I/O shield and bolts into the existing…
I liked the original design and made two more sizes to accommodate our needs. I also rotated them a bit so they fit properly together on the slicer layout.
Design These items are made to fit to standard 140mm fans commonly made by computer, chassis and rack fan manufacturers to connect to a 140mm flexible air conditioning pipe with a clamp. There are also two sizes available. The short…
The adapter is 15mm in height and 140x140mm in size. Prints without supports ! M4 compatible screw holes
A cylinder for storing various things in on your pegboard with square 9mm holes and a CC distance of 38mm.
Note : I've only printed the “ 100mm ” variant of this drawer and it works with the original brackets created by the author, KYZ Design.
Print settings: Filament: PLA, PETG Layer height: 0,2 Support: no Infill: 100% How 'bout a nice cup of LIBER-TEA?
Ventilation in closed cabinet with PC case. I use a 140 mm fan and a 100 mm pipe. Belüftung im geschlossenen Schrank mit PC-Gehäuse. Ich verwende einen 140-mm-Lüfter und ein 100-mm-Rohr
I ran out of fan screws and noticed that the PLA+ filament that I used far strong enough that screws aren't needed. I made a project using 8 fans. after quickly running out of screws I made these screwless connectors. They are a very…
Cooling Base for your AVM FRITZ!Box 7530 (AX) Got a spare PC case fan you aren't using? Print this cooling base for your router! Two variants for use with 120mm and 140mm case fans available. Print the optional standoff feet, when using…
This tophat is designed to place a 140x25mm fan on top of the case to help with the extraction of hot air. There are two prepared variants, one to print the thing in one piece (Meshelicious_Tophat_v2) and there is one that is printed in…
Remixed the Adjustable Perfect Desktop Fan Stand to fit 140mm fans. Scaled the size to fit 140mm fans, There should be enough in the front to fit a charcoal filter (optional for use as a solder extractor). I left the pins that are meant…
Fan shroud for the Xbox Series X Console, this design utilizes a 140mm fan to increase airflow and cool the system more efficiently. To power the fan from the device, a 4 pin fan to USB adapter is required, such as these selling on…