Search results: 270

Sort order

1,012 models

P
PrintablesIn3DSpace

Logitech C270 Mount Prusa i3 MK3

Mount for a Logitech C270 webcam for the Prusa i3 MK3. Great for monitoring prints and creating time-lapses. This will require the removal of the original webcam base, which can be achieved by removing the foam end caps, exposing a screw.…

Print approx. €1.08–€1.31 excl. taxPreliminary estimate for one variant

Downloads
4,458
Likes
613
Rating
4.82
P
Printablesgeektoybox

Logitech C270, C310 and C505 Focus Wheel (Complete)

I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,789
Likes
423
Rating
4.94
P
PrintablesPjtrQ

Keyboard feet (Logitech K270)

Keyboard feet for logitech k270 Printed in PLA

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
1,187
Likes
59
Rating
4.93
P
PrintablesPrinterfreak

Logitec C270 - Focus Adjustment

Modification to adjust the Focus on a Logitec C270 Webcam. Be aware that if you open the Camera the Focus Ring is glued into place. You can Remove this glue with a small Screw driver. Additionaly you will need 2x M3x8mm Screws to mount…

Print approx. €2.03–€2.49 excl. taxPreliminary estimate for one variant

Downloads
1,131
Likes
137
Rating
4.97
P
PrintablesAdam Oellermann

Logitech C270 Tripod Mount

A simple tripod mount for the Logitech C270 webcam. With so many churches needing to stream services because of the COVID-19 lockdowns, and a shortage of webcams, I hope this will help someone deploy their old C270 - a decent camera,…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
921
Likes
87
Rating
5
P
Printablesebeeche

Prusa MK4 camera mount for Logitech C270/C310

Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…

Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
891
Likes
203
Rating
4.76
P
PrintablesStanley

Logitech C270 arm base for 30x30 aluminum extruded profile

This is remix of Logitech C270 tripod for 30x30 extruded aluminum profile. Print instructions Rafts: No Supports: No Resolution: 0.2mm Infill: 40%

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
194
Likes
37
Rating
5
P
Printablesfns720

Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant

Downloads
167
Likes
18
Rating
5
P
PrintablesMax

Logitech C270 mount Prusa mini with cable strain relief

Bit of a mash up I was already using the X-axis cable strain relief clip, so I incorporated geektoybox’s C270 webcam mount. Perfect for spaghetti detective or general nozzle/print checking. Added an extra 10mm offset towards the rear to…

Print approx. €0.99–€1.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
145
Likes
20
Rating
5
P
PrintablesIronAegis

CR-10 Smart Pro Logitech C270 Right X-Axis Mount

This is a cover that slides over the existing x-axis tensioner and does not require any hardware or modifications to secure to the machine. Use an M3x30mm bolt to self-tap the threads holding the camera to the mount.

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
8
Rating
5
P
PrintablesJohn Brown

ASUS Z270E IO Shield

Asus Z270E IO Shield. Printed on a Prusa XL 5T using PLA 0.4n. The item printed clean, no support or brim was necessary.

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant

Downloads
59
Likes
4
Rating
0
P
PrintablesBen

Lasko 2708 Tower Fan Base Column

My Lasko model 2708 fan was knocked over and the plastic base broke. Instead of throwing it away, I designed a replacement base with a few modifications to make it more print friendly. The base reuses the original hardware. Add a stop or…

Print approx. €18.66–€22.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
3
Rating
0
P
Printablesbradyprints

Baratza Sette 270W Hook Cylinder

After the original plastic part failed (see photo of the gray ring), I needed a replacement. This part isn't an exact match, but does the job. Steps: Print part, using supports as required and 100% infill. I used PETG. Use soldering iron…

Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
3
Rating
0
P
PrintablesMark

Panasonic AJ-PX270 Mic Mount to Sennheiser Cold Shoe

Designed to replace the shotgun mount on an AJ-PX270 with a cold shoe for hanging a Sennheiser wireless receiver pack. Print in ASA or PETG if you're going to abuse your camera by leaving it in hot cars or direct sunlight (bad photog).…

Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
2
Rating
0
P
PrintablesScrap King

Kings 270 degree awning support

Kings awnings have a habbit of getting droopy, as thier knuckles can bend a bit over time, which leads to the bag they live in when stowed riding lower than when first fitted. In my case, as it was mounted on my van, it would bash into…

Print approx. €5.26–€6.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
2
Rating
0
P
PrintablesFilcuk

Logitech C270 Focus Ring Mod Privacy Cap

A simple privacy cap for the Logitech C270 - Focus Adjustment Mod . ⌀ 17mm with an inner slope of 0.2mm - may fit other similar mods. Features No supports required ✨ Extremely fast print (≤2 min) 💨 Print ≤0.20mm layers recommended What…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
0
Rating
0
P
PrintablesMagicShrimp

270 Degree Hinge for Elegoo Centauri Carbon

Required Stls: 1x hinge_upper 1x hinge_lower 1x arm_upper 1x arm_lower 2x nut_block *4x plastic_spacer *The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass. Required Hardware:…

Downloads
9,744
Likes
1,137
Rating
4.9
P
PrintablesAlex_cf_Siu

270 degree Door Hinge for Creality K1

[5 Dec 2023 short update] Known Issues: A.) This is designed for K1, I don't own K1 max, not sure if it will fit, there are K1 max version 270 hinges done by others also available on Printables. B.) PLA will work, but recommend PETG or…

Downloads
8,747
Likes
753
Rating
4.8
P
PrintablesDiablo

270 Degree Geared Hinges (V2) for K1/K1 Max/K1C. Easy print option. Not print in place.

I CANNOT SAY THIS ANY SIMPLER. I'M WRITING THIS IN UPPER CASE SO THAT WHEN SOMEBODY SAYS ‘I DON’T UNDERSTAND WHAT I NEED TO PRINT' I CAN SAY IT'S ALL IN THE INFORMATION PAGE. AT A BARE MIMIMUM, EVEN IF YOU DON'T READ ANY OF THE MAIN TEXT,…

Downloads
3,680
Likes
726
Rating
4.57
P
PrintablesJerrari

MODULITH 270 Under-Table Starter Kit

Turn the underside of any table into storage. Screw in a rail, slide in a drawer. MODULITH rails mount under a desk, shelf or enclosure table with a few wood screws. Cases slide on and QuickLock holds them, so you can swap or rearrange…

Downloads
2,789
Likes
497
Rating
4.88
P
Printablesjanw

Logitech C270 Mount for Ender 3 (v2)

This is a simple mounting bracket to attach a Logitech C270 to the Ender 3 X-gantry. It holds the camera at a good angle towards the bed and printing head, with the tilt being adjustable. The camera and bracket itself are attached using a…

Downloads
2,449
Likes
174
Rating
4.84
P
PrintablesEric Feliciano

Creality K1 Max 270° Door Hinges w Door Latch

Creality K1 Max 270° Door Hinges With Door Latch. My first attempt at a remix so any feedback is appreciated. For print tips, follow original.

Downloads
2,394
Likes
242
Rating
4.91
P
Printablestevashkevich

Logitech c270 Mount

Just a remixed mount piece for the Logitech c270 webcam. I had already removed the mount plate from my webcam for a previous mount so this lets you just screw that into this piece. (it is/was a bit of a mess around to get the screw in,…

Downloads
2,161
Likes
250
Rating
4.84
P
PrintablesRIBsfit

Print In Place K1 Max 270° Door Hinges w/Door Latch

I've been waiting for a 270° Door Hinge for the K1 Max since I first scared myself that it would shatter if swung to far. The factory design has the screws run right into the frame if opened more than 90°. Metal screws against glass with…

Downloads
1,705
Likes
242
Rating
4.07
P
PrintablesKYZ Design

270 Degree Door Hinge - Designed for 3D Printing

I use this for my 3D printer enclosures - sometimes you want to open the door and get it out of the way. The mounting holes are for “6 gauge” or 4mm countersunk screws, the pivot is M4x30 cap screw (if you get a longer one with an…

Downloads
1,685
Likes
519
Rating
5
P
PrintablesHaro

K1 270 degree geared door hinge

need 4x m3 insert nut

Downloads
1,469
Likes
138
Rating
4.64
P
PrintablesChirimorin

Logitech C270 mount for Neptune 4 Series

Version 2 is now available for download! Version 2 features a sturdier mounting system that clips in place, no more worries about your webcam falling off the printer! This version also slightly moves the camera back so it has more space…

Downloads
1,415
Likes
144
Rating
4.95
P
PrintablesDiablo

K1C (and later K1) adapters to fit my (V2 & V3) 270 degree door front hinges

Adapter plates for allowing K1C and later releases of the K1 to use my 270 degree hinges. ----------------------------------------------------------------------------------------------------------------- These two (small) side panel hinge…

Downloads
1,259
Likes
140
Rating
5
P
PrintablesFeetOffTheTable

Ender 3 V3 SE / KE Logitech Webcam Camera Mount (C270 or similar)

I have taken ALL of the work out of mounting your Logitech C270 to your Ender 3 V3 SE X-axis. You don't need to do ANYTHING other than have this camera (or camera with similar mount), and this Ender, then just print. No hardware? No…

Downloads
1,258
Likes
136
Rating
4.8
P
PrintablesPomi

Logitech C270 Webcam Cover Replacement (with GoPro Mount)

This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…

Downloads
1,229
Likes
188
Rating
4.69
P
PrintablesTianZi

Creality K1 270° Corner Mounted Removable Door Hinges w/ Air Gap Filler

Note: Does NOT work on the K1 Max. Design Summary: The Creality K1 is an excellent printer, but Creality's choice of door hinges is questionable. A partially opened glass door simply seems like an accident waiting to happen. I looked at…

Downloads
1,154
Likes
218
Rating
4.69
P
PrintablesLloyd

270 Degree Hinge/Cover and Bed Holder Remix for Elegoo Centauri Carbon

This is a remix of the right hinge from MagicShrimp's 270 degree hinge for the Elegoo Carbon Centauri. It is literally a mash of the hinge and the right holder from Julien Mairy's cover and bed holder. I wanted to have both, but they…

Downloads
1,128
Likes
149
Rating
5
P
PrintablesiPeel

Voron 2.4 Logitech C270 Mount

The camera is angled down by 3 degrees. To use this you need a 15mm or so M3 bolt, and a couple of M5x8 bolts and T slot nuts. Remove the monitor bracket from the camera, the mount then fits in place of the monitor bracket. Note the…

Downloads
1,070
Likes
113
Rating
5
P
PrintablesMagicShrimp

Extras for 270 degree hinge

Corner covers: Cover up the gap left from removing the hinges for a better chamber seal. No additional hardware required, just reuse the screws used to hold the original hinges in place. Magnetic Door Latch: Uses 2 8x3mm magnets to hold…

Downloads
1,004
Likes
104
Rating
5
P
PrintablesDiablo

K1 Max/K1 /K1C. 'Vorlon' Door catch. For use on printers with 270 degree hinges fitted

If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…

Downloads
1,001
Likes
242
Rating
4.9
P
PrintablesIbot_3D

Voron Trident C270 Mount

Uses a M3x25 instead of the default pin. You'll also need a M5x16 + nut and 2xM5x10 + 2x extrusion nuts Mounted in the rear right corner for the highest distance possible

Downloads
964
Likes
128
Rating
4.92
P
PrintablesCalvin

Elegoo Centauri Carbon - 270° Door Mod w/ Top Glass Holder

I modeled a top glass holder onto the lower hinge of the door mod by MagicShrimp. This allows both the door hinge mod as well as a top glass holder on the printer since both were not able to be used at the same time. The rest of the…

Downloads
913
Likes
135
Rating
0
P
PrintablesDiablo

270 degree hinges (V3) magnetic faceplates upgrade

TLDR:- New Hinge design (V3) allows for quick change V3 face plates/covers while Using V2 additional V2 components for the hinge assembly. New optional tools added. Also includes post processing and detailed assembly instructions (with…

Downloads
903
Likes
134
Rating
5
P
PrintablesJerrari

GEN2 Under Table Rails - 270

MOUNT GEN2 UNDER ANY TABLE OR DESK GEN2 Under Table Rails turn the dead space under any desk, table, or shelf into slide-and-lock drawer storage. Screw the rail up once, then slide GEN2 cases in and rearrange your whole setup in seconds…

Downloads
850
Likes
56
Rating
5
P
PrintablesCourtland

Creality K1 Max 270 Door Hinge Spacer

This is a spacer for the 270 degree hinge below. I felt the gap between the door and printer was too large so I made a small space. Original here:…

Downloads
803
Likes
87
Rating
5
P
PrintablesMarco

Logitech C270 Webcam Halter

Eine Webcam Befestigung für die Logitech C270 Webcam. Es wird keine weitere Schraube benötigt! Erstellt für https://www.printables.com/de/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m Die auf den Bildern verwendete…

Downloads
798
Likes
150
Rating
4.92
P
PrintablesJerrari

GEN2 270 Tabletop Starter Kit

GEN2 270 TABLETOP STARTER KIT The easiest way to start the GEN2 QuickLock Modular System on any surface. 270 is the LARGE depth (about 256 mm inside), sized for long tools, cordless kits and big spools. GEN2 was originally built to mount…

Downloads
788
Likes
119
Rating
5
P
Printablesthall72

Lego Compatible (32270.dat) Technic Gear 12 Tooth Double Bevel

This model is compatible with the lego system.

Downloads
781
Likes
50
Rating
0
P
Printablesmulde

270 Degree Door Hinge - DIN 974-1

Hey, this is a remix of KYZ-Design's amazing model. It's a Door Hinge which allows you to open a door (for example of an enclosure) 270 Degree. The door hinge consists of 2 Parts. Both of them have counterbores (according to DIN 974-1)…

Downloads
775
Likes
354
Rating
5
P
PrintablesScatterthought

Logitech C270 Focus Ring

The faceplate in Night Gryphon's Logitech c270 webcam manual focus adjust ring is perfect, but the lenses on newer C270s have a slightly smaller diameter than old ones. As a result, the focus ring doesn't fit. I adjusted the inside…

Downloads
730
Likes
79
Rating
4.93
P
PrintablesmosuTech

Kobra 2 Pro/Plus/MAX C270 Camera mount

Logitech C270 mount for KOBRA 2 PRO/PLUS/MAX Updating Kobra 2 pro/plus/max to versions above 3.0.5 , it is possible to connect a USB camera and watch the printing process using Anycubic app . I found my old camera and created a mount for…

Downloads
705
Likes
74
Rating
5
P
Printablesrotor02

Logitech C270 Cover

Mon frere m'a fait un cadeau. Sa vieille webcam. J'ai donc dessiné une couverture. Vive la paranoïa. Comme toujours j'ai ajouté les fichiers STEP pour votres propres modifications. Print instructions Rafts: Yes Supports: Yes Resolution:…

Downloads
701
Likes
87
Rating
5
P
PrintablesDiablo

Upgraded pins option V2 & V3 270 Degree Geared Hinges.

The 270 degree hinges these new pins were designed for are here :- 270 Degree Geared Hinges for K1/K1 Max/K1C. Update November 1st 2024:- added some fatter link/connectors. Originals (by design) were thinner to allow the pins to be seen…

Downloads
673
Likes
61
Rating
5
P
PrintablesJerrari

MODULITH 270 Decor Drawers - All

Pick a drawer, then make it yours. The front is up to you. Decor drawers take swappable faceplates and handles, so you can change the look anytime without reprinting the drawer. Print the body in budget filament and save the fancy stuff…

Downloads
668
Likes
59
Rating
4.8
P
PrintablesFabio

Fully Printable Hinge 270 Deg

The original hinge (this is a remix) is nice looking but it did not allow for 270 degrees of movement and I could not re-inforce the core with metal, to make very stiff. Also it was very big and I wanted it a bit smaller to fit M3 allen…

Downloads
667
Likes
303
Rating
4
P
PrintablesPaweł

robocat 270 fpv drone keychain

Hi, this is Robocat 270 quadcopter keychain, i made it to look like a real one ;), i hope u will like it. There are two versions, the one with antena have a hole where you can put a piece of 1,75mm filament to imitate antena, second one…

Downloads
641
Likes
58
Rating
5
P
PrintablesTaewon

Creality K1C Door Hinge 270 Dgree (No Gap Filler Version)

📌 Creality K1C 270 Dgree Hinges (no Gap Filler) This model is a remix of TianZi's work from Printables. Thank you for sharing such a great model. Original and installation guide:…

Downloads
619
Likes
73
Rating
2
P
Printables4noxx

VORON - C270 Holder

VORON - C270 Holder For mounting bottom side gantry → C270_holder.stl or for mounting on the frame → C270_holder_large.stl BOM: 2x M3 Threaded Insert 1x M3x8 1x M3x20 Remix: https://www.thingiverse.com/thing:4742899

Downloads
613
Likes
67
Rating
5
P
PrintablesMaesgd

Twisted planter _270 with integrated water reservoir ( onepiece _ No support)

2nd variation of my original twisted planter. This time the planter is 270 degrees twisted compared to the original 60 degrees. A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the…

Downloads
603
Likes
147
Rating
4
P
Printablesbillsmithem

Ender 3 V3 SE C270 Camera Mount

C270/C310 mount for the Ender 3 V3 SE that does not require mounting hardware. Snaps onto the Z axis extrusion cover. Carefully spread the hooks and slide on from the front. Two parts printed oriented for maximum strength, super glued…

Downloads
584
Likes
93
Rating
5
P
Printables3d_print_it

Ender 3 S1 C270 mount / Kamerahalter für Ender 3S1 C270

Die montage an der rechten seite der X-Achse führt zu einem guten blick auf die Düse. Mounting on the right side of the X-axis results in a good view on the nozzle.

Downloads
576
Likes
84
Rating
4.86
P
Printablesmigsun

Ender 3 S1/S1Pro Logitech C270 mount

The original hinge pin from the camera can reused, no additional screw and nut needed. This position comes with a unobstructed view of the nozzle. Remix from: https://www.thingiverse.com/thing:5467406 Thx to Sławomir Pietrzakslawix

Downloads
572
Likes
57
Rating
4.89
P
PrintablesItzo

AngryCAM Logitech C270 Voron

MISE À JOUR 24.08.2023 : Fixation C270 Création de 2 fichiers supplémentaires Fixation C270 miroir.stl Fixation C270 cable miroir.stl 02.07.2023 : Couvercle C270 v2 Modification de l'emplacement du logo Voron Mise à jour Angrycam C270.stp…

Downloads
569
Likes
116
Rating
4.88
P
PrintablesDiablo

K1 Max / K1 / K1C. 'Penwald' Door catch. 270 Degree hinge glass door holder.

If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…

Downloads
568
Likes
129
Rating
5
P
PrintablesCyfron

270 degree hinge for the printer enclosure door

You need an M3x45 screw and an M3 nut to assemble the hinge. Fasten the hinge with M4 screws. -------------- Do montażu zawiasu potrzebna jest śruba M3x45 i nakrętka M3. Przykręć zawias śrubami M4.

Downloads
560
Likes
141
Rating
5
P
Printablesfoorschtbar

Logitech C270 Webcam holder and arm for Original Prusa Mini/MK3/MK4

A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…

Downloads
559
Likes
111
Rating
4.89
P
PrintablesLukas Borg

Logitech C270 Mount Sovol SV-06

Logitech C270 webcam mount for an Sovol SV-06. Perfect for monitoring and Octoprint time-lapses. This is a remix of the mount from In3DSpace : https://www.printables.com/model/3991-logitech-c270-mount-prusa-i3-mk3 Print instructions: 0.2…

Downloads
555
Likes
68
Rating
4.67
P
Printables3DPrintSOS

CR10, Ender Logitech c920, c270, c310, c910 20/20 camera mount system

After trying different ways to mount my Logitech c920 onto my Ender 3, I decided I wanted a way to mount the camera off the bed or Y axis. I came across @SCHEMENKE's design for an iPhone mount and thought it was a brilliant design. So,…

Downloads
551
Likes
85
Rating
4.73
P
PrintablesDruckbar

Elegoo Neptune 4 Series Webcam Camera Mount C270

Recreation of the left x axis cover with mounting point for a Logitech C270. Had to raise the height of the cover to get enough clearance for the cam. The screw from underneath is a bit fiddly to get in, but it works. I've included the…

Downloads
528
Likes
63
Rating
3
P
PrintablesJerrari

GEN2 270 Decor Gridfinity Magnet Drawers (Legacy)

NEW VERSION: MODULITH 270 GRIDFINITY DECOR DRAWERS These drawers have been redesigned and re-released as part of MODULITH (formerly GEN2). The new page has 12 sizes (1W to 4W in 1H, 1.5H and 2H), a half-grid side channel, optional magnet…

Downloads
517
Likes
39
Rating
4
P
Printableslayer.shifted

Neptune 4 Belt Tension Stopper - C270 Mount

This is a Remix of the original to add support for the commonly used logitech c270 webcam. For installation Instructions see Remix list - Chirimorin original mount. There is a 4 Pro specific version included. (jul22,2024) removed untested…

Downloads
517
Likes
77
Rating
4.89
P
Printablesluc.e

Logitech C270 tripod

Just used 2 things to build a portable Logitech C270 webcam tripod and added a base. The base should be printed with 3 walls, support and bridge enabled. The empty space in the base should be filled with some metal (I used lead) to give…

Downloads
514
Likes
94
Rating
4.67
P
PrintablesSquishinStix

Logitech C270 Webcam Mount, Faceplate, and Focus Ring

This is a wall mount specifically designed for the Logitech C270 webcam (with the base removed), a replacement faceplate, and a focus ring to adjust the focus on the fly. The faceplate and focus ring are a remix for my specific use case.…

Downloads
498
Likes
37
Rating
4.67

Elegoo Neptune 4 Pro C270 Mount

Mount for Logitech C270 webcam. Should fit Elegoo Neptune 4 and 4 Pro.

Downloads
497
Likes
53
Rating
3.6
P
PrintablesTB

270 degree hinge elegoo centauri carbon with top and build plate holder - for cabinet overhead

I have a cabinet over the top of my printer and couldn't get the top glass in the original due to clearance.

Downloads
474
Likes
58
Rating
5
P
Printables3dprinthobbyist

K1 Max 270° Door Hinges (remixed)

I remixed the original version of @RIBsfit's design to correct most of issues that reported by @Mordiev. 2 M3x8mm and 2 M3x16mm screws are still needed to tight the hinges to into the frame. The backplate is not neededed but 4 M3 x H6mm x…

Downloads
472
Likes
52
Rating
5
P
PrintablesMossi Brossi

270 Clamping Hinges

Any questions? Hit me up on the Voron Discord! @Alexander Þór This design is based on chrisgonzales already incredible 270 degree hinges. The main goal of this remix was to have the front panels mount in a way that didn't use any VHB tape…

Downloads
470
Likes
89
Rating
5
P
PrintablesUjang Karnadi

logitech c270 webcam mount vslot 2020

logitech c270 webcam mount vslot 2020

Downloads
466
Likes
53
Rating
5
P
Printablesfns720

Single doser for Baratza Sette 270* grinders

This is a minimalist single doser container with a plain dust cap. I don't want to hold n*hundred grams of coffee beans in the grinder so the original Baratza container was a bit overkill for me. That's why I have designed this minimalist…

Downloads
465
Likes
48
Rating
4.8
P
Printablesnmaggioni

Voron 2.4 270° Front Panel Hinge - Removable

After building a Voron v0.2 I wanted to be able to easily remove the front panels on my v2.4 as well but still liked the design of my current hinges made by chrisrgonzales (see Remixes links below). Now the top/panel parts can be slid off…

Downloads
458
Likes
89
Rating
5
P
PrintablesRed Haniwa

32650 32700 battery spacer

Scaled up nexty's 18650 battery spacer to accommodate 32650 battery size. I need just a few spacers for my LiFePo4 12v pack so it make more sense (and faster) to print it than buying on ebay. The dimension of this spacer is: 35.8mm x…

Downloads
457
Likes
28
Rating
5
P
PrintablesJomppanen

Logitech C270 Webcam Cover Replacement Remix

I made remix of Logitech C270 webcam cover made by user Pomi. I wanted to use screws to secure the lid to the base and I also made some adjustments to clearances. You will need 2pcs of M3x8mm or M3x10mm screws for the lid. STEP files…

Downloads
438
Likes
62
Rating
5
P
PrintablesRobin

Yet another Logitech C270 mount for LACK enclosure

All available mounts for the C270 webcam somehow did not fit, interfered with something or where just too big, so I made my own. You'll need 3 M3x20 screws and nuts to assemble - because everybody who owns a 3D printer has those, right?…

Downloads
433
Likes
63
Rating
4.94
P
PrintablesKahnindustries

Lotad - Pokemon 270

In honour of Pokemon Go's Lotad Limited Research Day (March 30th) I have knocked up a Lotad one piece model Need supports for its big floppy head! Print instructions Category: Creatures

Downloads
422
Likes
99
Rating
5
P
PrintablesDanPDK

M270 MLRS Pen Holder

Inspired by a model I bought but which I was not happy with, as it required a ton of supports and could only rotate, not tilt. This model can tilt up and down and rotate. The tilt automatically locks in the up position and a small plunger…

Downloads
420
Likes
69
Rating
0
P

Logitech C270 mount for Qidi X Max 3

Took the camera mount piece from luc.e tripod mount to make it work with the inner framing of the Qidi X Max 3. Simply slides onto the L bracing. No supports needed and I was unable to get the tiny screw back in the pivot post but its a…

Downloads
420
Likes
47
Rating
5
P
PrintablesMichael

Voron v0 door hinges 270°

Modded original v0 hinges to allow it to open 270°

Downloads
416
Likes
86
Rating
4.33
P
Printablesholicede

door latch for creality k1 270 degree hinge upgrade

this is a door latch for creality k1 270 degree hinge upgrade to keep and hold the door open.

Downloads
406
Likes
50
Rating
5
P
PrintablesBen

Ender 3 V3 SE X-Axis Mount C270 Mount

A Simple C270 X-Axis Mount for the Ender 3 V3 SE Used the mount I use for the Ender 2 Pro and remixed it for the Ender 3 V3 SE, the clip is great for the C270 if you don't want to remove the clamp it comes with. I printed it using 0.2…

Downloads
398
Likes
56
Rating
5
P
PrintablesRegis

270° Hinge for Original Prusa Enclosure

The hinge pins can also be removed from the area of an allen key.

Downloads
393
Likes
134
Rating
4.91
P
PrintablesMediaMan3D

C270 Logitech camera mounts for Prusa Mk3S(+) and Bear frames

The Arm and Bracket parts slide together after clipping them onto the extrusions. See photos. The C270 camera mount tilts and swivels to provide complete control over camera placement. I have provided 6 different camera mount positions…

Downloads
391
Likes
84
Rating
4.8
P
Printablessidoh

Logitech C270 Mount for IKEA Lack Enclosure

Mount for Logitech C270 webcam in Prusa's IKEA Lack Enclosure. Fits on top of the top left leg mount in the front of the enclosure. Fusion 360 file: https://a360.co/2Jmy5bT Print instructions Category: 3D Printer Accessories

Downloads
387
Likes
48
Rating
4.67
P
PrintablesJaseAS

1:2700 Scale Imperial Star Destroyer Upgrade Parts

These are my offering for upgrading the classic Revell 1:2700 scale Star Destroyer. I've used some artistic license in places - adding in detail where there wasn't too much on offer. These were done for a Resin printer - mine is Anycubic…

Downloads
381
Likes
15
Rating
0
P
PrintablesBeloc

Logitech K270 Keyboard Leg

Needed a replacement leg for a keyboard. Easy design and print. I've included an .stl and .f3d.

Downloads
378
Likes
31
Rating
4.6
P
PrintablesJerrari

MODULITH 270 Classic Drawers - All

Print it, pull it off the bed, slide it in. One piece, zero assembly. Classic drawers print in one go with the handle built right into the front. No faceplates, no screws, no clips. Pop it off the plate and it is ready to go to work.…

Downloads
377
Likes
34
Rating
5
P
PrintablesDiablo

Optional screw type pins for 270 degree hinges (V2&V3)

Update November 1st 2024:- added some fatter link/connectors. Originals (by design) were thinner to allow the pins to be seen and also guarantee no sanding/post processing would be needed with an out of spec print. Newer fat links are…

Downloads
376
Likes
54
Rating
4.75
P
Printablesvaldman

TempTower ASA Prusa mini 230-270 i PETG 215-250

Wieża temperatur dla ASA 230-270 i PETG 215-250

Downloads
376
Likes
13
Rating
5
P
PrintablesIc3

Scharnier Tür RatRig V-Core 270° - Hinge 3030

Scharnier Tür RatRig V-Core 270° - Hinge Das Scharnier passt an die “originale” Tür vom RatRig V-Core 3.1. Dort sind sonst rechts und links Griffe und Magneten zum halten. Aber erstens hat man somit nie eine Hand frei und weiß auch immer…

Downloads
372
Likes
50
Rating
5
P
PrintablesXenoTrixx

Ender 5 S1 C270 Mount

Corner mount for Ender 5 S1 Hardware: 1x C270 1x C270 Pin (extracted from old mount, check youtube on how to remove it) 4x M4x25mm (30mm in Picture) 4x M4 Nut 1x M3x10mm 1x M3 Insert Print: 1x Spacer 1x Body (Base Plate) 1x Arm Holder 2x…

Downloads
371
Likes
72
Rating
5

Improved Logitech c270 webcam mount + Snapmaker 2.0 base options

These remixes are based on these three things: Logitech C270 tripod, by luc_e, December 27, 2015 C270 Focus Ring - OpenSCAD included, by biomushroom, August 24, 2016 snapmaker base plate, by Okatake, February 12, 2018 (Note: I tried to…

Downloads
367
Likes
83
Rating
5
P
PrintablesIan Zelgowski

Merged Cover/Bed Holder and 270 Degree Hinge Piece

This takes the bottom right piece of the “Cover and Bed Holder” by Julien Mairy and merges it with the bottom “270 Degree Hinge” by MagicShrimp . All credit goes to the original designers of those models. I just aligned the parts and…

Downloads
365
Likes
38
Rating
5
P
Printablesplasterek3d

LOGITECH K270 KEYBOARD REPLACEMENT FEET / LEG K260 K270 K270R MK260 MK270 MK270R

Logitech Keyboard Replacement Feet / Leg Logitech: K260 K270 K270r MK260 MK270 MK270r

Downloads
363
Likes
20
Rating
5
P
PrintablesKen226

2020 Voron top center mount for Logitech c270 webcam

Just remove the pin and bushing, then replace the stock C270 clip with this part. Mounts in the top, front, center rail using two m3x8mm screws and two m3 t slot nuts.

Downloads
360
Likes
43
Rating
4.67

Qidi X Max 3 Logitech C270 camera bracket.

Logitech C270 Qidi X-max 3 camera bracket. New rounded model, for placement in the furthest corner. **Add model V4 with 2 mm less height It allows to place it in the corner where it does not disturb, and the angle and the distance is…

Downloads
360
Likes
37
Rating
5
P
PrintablesSapphire Zodiac

270 Degree Hinge for Elegoo Centauri Carbon - Extended Arms

The original model had files called "arm_upper" and "arm_lower". These arms were too short for my newer version of the printer and would hit onto the edges of the printer opening when I went to close the door. I had to push the door into…

Downloads
359
Likes
44
Rating
5