Search results: 330

Sort order

531 models

P
Printablesi5cemi

Ersatz Rad 7,5 Zoll Makita Rasenmäher (hinten) - #DA00000330

I designed an almost identical spare wheel for the rear of my Makita cordless lawn mower - more stable than the original because the soft struts are no longer needed! The original hubcap can still be used. A further improvement in driving…

Print approx. €10.81–€13.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
214
Likes
18
Rating
5
P
PrintablesNS

Lexus RX400h, RX400, RX330 Key adaptive holder (Fob, case) with logo

Very strong case for Lexus RX400h, RX400, RX330. Uses transparent glue to securely hold the case together. I prefer glue because screws and nuts are not attractive for this kind, small detail. Case will not flex and very strong when…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
6
Rating
0
P
PrintablesKC Wilkinson

ACME thread adapter for a Solo 330 Aerosol Smoke Dispenser.

ACME thread adapter for a Solo 330 Aerosol Smoke Dispenser. Had some very hard to reach smokes that the Solo pole would not get to. Made a ACME Female thread adapter to fit on a various number of painters poles. Now the sky is not the…

Print approx. €3.84–€4.69 excl. taxPreliminary estimate for one variant

Downloads
84
Likes
4
Rating
0
P
PrintablesJulianKoe

Adapter für Absaugung 93mm (Metabo DH330)

Adapter für einen Metabo DH330 Dickenhobel. Passt in die Absaugevorrichtung hinein und kann dann mit einem Schlauch verbunden werden.

Print approx. €6.81–€8.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
70
Likes
6
Rating
0
P
Printablesmaniac rc

Fluval Siena 330 feeding flap

feeding flap for Fluval siena 330 fish tank. No special mount needed. For assembly, use superglue

Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7
Likes
1
Rating
0
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Downloads
6,962
Likes
1,151
Rating
4.79
P
PrintablesTim

Lenovo ThinkCentre Tiny 10" Rack Mount - now with optional Keystone Sockets (M720q, M920q, P330, etc.)

I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…

Downloads
6,031
Likes
467
Rating
4.97
P
PrintablesSimin_03

CAN LID 500/330/250 ml STRONG BASIC

CAN LID – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 One-finger…

Downloads
5,204
Likes
1,154
Rating
4.93
P
PrintablesTom Vít

Realistic tyres/wheels for LEGO 10330 McLaren Senna Formula 1 car

The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…

Downloads
3,426
Likes
277
Rating
4.94
P
PrintablesSimin_03

CAN LID CLICK 500/330/250 ml STRONG BASIC

CAN LID CLICK – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆…

Downloads
2,518
Likes
601
Rating
4.78
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink 2.3

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Downloads
2,098
Likes
488
Rating
5
P
Printablesh0rsty

Bike Beer Clip for 330 ml Cans can claw

This model is used to hold a 330 ml can on bicycle bottle cages.

Downloads
1,515
Likes
127
Rating
4.92
P
Printablesmilspecmoehring

Stackable Soda Can Crate for 500 ml & 330 ml cans

yet another stackable crate for 500 ml cans. Supports needed. A version for 250 ml Red Bull Cans is available aswell the logo was made using this model

Downloads
1,288
Likes
449
Rating
5
P
PrintablesBeo666

Monster Energy Dosendeckel 330ml / 500ml Drink v2

ACHTUNG: HIER IST DIE NEUE v2.3 VERSION: LINK Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke…

Downloads
1,177
Likes
178
Rating
4.5
P
PrintablesDickens

Lego 10330 McLaren & Senna wall mount

Please add your makes when you are done This is a PLA printed 3D part designed by myself in Fusion 360. The wall mount is multi coloured to help it blend in better with the wall and the wheels. Only 1 fixing is needed into the wall. I…

Downloads
1,096
Likes
85
Rating
5
P
Printablesyu-supersonic

Can dispenser (330ml tall)

Can dispenser designed for tall 330ml cans (diameter 58mm, length 146mm). Other dispensers I tried didn't hold cans well enough while traveling downwards. Dispenser has been designed to fit 350mm depth shelves (tested on Bosch fridge).…

Downloads
1,064
Likes
589
Rating
0
P
Printablesmhparsons

Beverage Can Dispenser-330ml

Update: Widened all the models 2 mm to better accommodate can size variations. (Thanks to @Yoyo for his input!) ------------------------------------------------------------------------------------------------------------ Nested and keyed…

Downloads
956
Likes
395
Rating
4.5
P
PrintablesNeoRame

Honeycomb Euro Can dispenser (330ml and 500ml)

The Original has the issue that you had to sand the connections to fit. Also, the connections was to thin so that the constructions start to collapse if the rack was to full. I changed the tolerances for a better fit, and modified the…

Downloads
945
Likes
142
Rating
4.5
P
PrintablesKieran E

Bike Beer Clip for 12oz, 355ml, and 330ml Cans

Inspired by this design . I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the…

Downloads
919
Likes
106
Rating
4.7
P
PrintablesEngeneerNick

Two-in-One Can Holder for 500ml and 330ml cans

Like this model? check out the smaller version: https://www.printables.com/model/1366342-two-in-one-can-holder-for-250ml-and-150ml-cans 🛠 How Does It Work? This 3D-printed can holder features a clever sliding mechanism with a built-in…

Downloads
918
Likes
227
Rating
5
P
PrintablesRoad

Euro Can Dispenser for tall 330 ml cans

After realizing the scarcity of dispensers fitting the new tall 330ml can measurements, I was searching for a solution. Pedro's model is fantastic, but only suitable for the ‘fat’ 330ml cans. This is why I rescaled this and uploaded it…

Downloads
894
Likes
174
Rating
4.33
P
PrintablesZaxMan3D

Soda Can Dispenser Deluxe (EU 330ml 500ml)

🥤 Soda Can Dispenser Deluxe – Sleek, Stylish, and Functional! Upgrade your beverage organization with the Soda Can Dispenser Deluxe! Designed in an eye-catching Voronoi-style , this dispenser holds a six-pack of 330ml or 500ml cans…

Downloads
775
Likes
307
Rating
5
P
PrintablesDockGuy

eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]

Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…

Downloads
733
Likes
58
Rating
5
P
PrintablesRANPETEL

A320 / A330 131VU panel

A320/A330 131VU panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Important Note: While this panel can…

Downloads
633
Likes
35
Rating
0
P
PrintablesReProps

Narumi Exclusive Weapon GS-3305(Kaiju No 8)

about 5.5 ft. reinforced with a combination of .5 and .25 in dowels. have fun. Category: Props

Downloads
631
Likes
47
Rating
0
P
PrintablesPhill Bond

Yeti 330ml Can Spacer

If you love your Yeti can-holder like me and you also like to alternate your go-to beverage from those in the standard 375ml cans to those in the shorter 330ml cans, then this simple print is much more cost effective than buying a second…

Downloads
629
Likes
21
Rating
5

M3301 CR-10 / Ender-3 [Micro Swiss NG REVO Extruder] - Fan Shroud and Probe Brackets

Compatible with: Extruder : SKU M3301 - Micro Swiss NG™ REVO Direct Drive Extruder for Creality CR-10 / Ender 3 Printers Hotend: E3D Revo Hotend Fan: 4010 Part Cooling Fan: 4010 Blower Probe: Various Options 3D Printer Model: CR-10 CR-10s…

Downloads
626
Likes
25
Rating
4.67
P
PrintablesJawaswag

330ml can dispenser

Print the dowels at 40% infill to give them some strength. I used expanding glue, e.g Gorilla Waterproof Glue, in the dowel holes so the assembly Is stiffer. Use cable ties or clamps to keep the parts in place while the glue expands and…

Downloads
620
Likes
82
Rating
5
P
PrintablesRUMcajz

Can Holder Riser + Inserts (12oz + slim 330ml - Scalable)

Can Holder Insert / Riser I decided to make these simple inserts that can make using my canholders more enjoyable. 41mm Insert for smaller cans in a larger holder (12oz can in a 0.5L holder) 330ml Insert for slim (coke) cans in a larger…

Downloads
570
Likes
52
Rating
4.75
P
PrintablesSimin_03

CAN LID 500/330/250 ml STRONG ALIEN

A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 Two-finger operation – open & close…

Downloads
565
Likes
217
Rating
5
P
PrintablesLionel SAVOCA

Airbus A330-743L Beluga XL - Scale 1:100

Passionate about aviation and aircraft engineering, I couldn’t imagine not modeling the Airbus Beluga XL (A330-743L) — one of the most iconic cargo planes in the world, instantly recognizable with its unique “smiling” design. The model is…

Downloads
563
Likes
36
Rating
5
P
Printableswrmueller

Bosch Mini Remote BRC3300 Reparaturschelle

Hallo, ich habe hier für eine eBike Bosch Mini Remote BRC3300 ein Reparaturschelle konstruiert. Das Original ist leider gebrochen, ein Ersatzteil gibt es vom Hersteller nicht. Gedruckt in PC ist es stabiler als das Original. Auf der…

Downloads
514
Likes
14
Rating
5
P
PrintablesRosti

Can Dispenser UK/EU 10x 330/440ml Drink / Beer

June26 re-design note. @s0ren reported that in his print of the 8 can holder, he had problems removing cans (removal aperture not high enough). He had printed in PLA, I had printed in PETG, perhaps there was a difference in shrinkage…

Downloads
512
Likes
409
Rating
5

Airbus 330-800 NEO

1:200 Desk Model of the Airbus 330-800 NEO. The .3MF file contains the parts for the print. Wings were printed with supports.

Downloads
496
Likes
37
Rating
4
P

EBB36 VZBOT VZ235 VZ330 MOUNT - NEW BEACON DUCT

HI, I would like to share my adapter to mount BTT EBB36 on VZ Alu Printheads. It is designed for: BTT EBB36 V1.2 + VZHextrudort LOW PLUS + MOONS Stepper and Alu printhead. I did not test it with other motors like LDO (height may vary).…

Downloads
456
Likes
58
Rating
5
P
Printableslostdutchmann

Realistic tyres/wheels for LEGO 10330 McLaren Senna Formula 1 car dual color flat letter

Made the goodyear eagle text flat with the tyres so it looks more like it's printed on. v1: Was my first version and gives the letters a faded look. The backtyre is not fully optimized and prints extra white in de tyre it self. v2 does…

Downloads
456
Likes
39
Rating
0

M3302 Ender 5/Pro/Plus [Micro Swiss NG REVO Extruder] - Fan Shroud and Brackets

Shroud and probe brackets for the NG Revo Extruder for the Ender 5, Ender 5 Pro and Ender 5 Plus.

Downloads
453
Likes
28
Rating
0
P
PrintablesBeo666

Monster Energy Dosenverschluss 330ml / 500ml Drink

Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…

Downloads
447
Likes
57
Rating
5
P
PrintablesThibault Huguet

Lego 10330 - McLaren MP4/4 - Realistic Tyre & Rims (separated)

The Lego model 10330 - McLaren MP4/4 Senna - comes with tyres that are much narrower than the real cars. This model is based on @tomvit work, and provides separate parts for tyres and rims to be printed individually. For best effect, I…

Downloads
431
Likes
43
Rating
0
P
PrintablesDickens

LEGO set 10330 McLaren Senna Formula 1 car tyres/wheel with or without logo's

LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…

Downloads
421
Likes
46
Rating
5
P
Printablesdave2007

grinch articulated https://makerworld.com/en/models/783309?from=search#profileId-720729

https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license

Downloads
406
Likes
44
Rating
5
P
PrintablesDer-3DMitsh

Dosen Deckel 330 und 500 ml

Dosen Deckel 250 ml gedruckt aus TPU 04 Düse in 0,2mm geeignet Insekten ab zu halten bedingt dicht wenn richtig angebracht läuft keine Flüssigkeit heraus. gedruckt mit Genius Pro 04er Düse bei 0,2mm mit geeetech TPU einfach und simpel…

Downloads
404
Likes
25
Rating
5
P
PrintablesSzarkadiusz

Legendary Vikings horn for drinks - optimized for 250/330/500 ml cans

If You are glad with my work You can buy me coffee: https://ko-fi.com/szarkadiusz Legendary Vikings horn for drinks - optimized for 250/330/500 ml cans Be true legend Old tales said that You need fo finish Your drink in one sip ! Be Brave…

Downloads
403
Likes
232
Rating
5
P
PrintablesAldoale

CPAP Muffler for Vz-Bot 330

I tried to adapt the original born for the VZ-Bot 235 to the VZ-Bot 330 for those who have the stepper pin facing inward I added an Airbox with the lower left part recessed so as to adapt it directly without having to turn the engine, if…

Downloads
373
Likes
65
Rating
0
P
PrintablesDave

Dewalt TOUGHSYSTEM 2.0, Drawers DWST08330-1

-tisknuto z PLA -Dewalt TOUGHSYSTEM 2.0, DWST08330-1

Downloads
370
Likes
72
Rating
5
P
PrintablesRANPETEL

A320 / A330 ATC MSG panel

A320/A330 ATC MSG panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Can be connected to 131VU panel which can…

Downloads
360
Likes
20
Rating
0
P
PrintablesHans Schulz

Fujitsu Primergy TX1330 M1 2.5" HDD Caddy

Hotswap 2.5" HDD/SSD caddy for old Fujitsu Primergy servers. Fits as a replacement for A3C40058356, see compatibility section for servers. Fits drives up to 12.5mm, however airflow might be an issue. You can use the metal piece from blank…

Downloads
354
Likes
15
Rating
5
P
PrintablesINRG

Fluke 330-Series Clamp Meter Replacement Knob

The final print might require a bit of trimming to fit. But works just fine. Compatible with Fluke: 333 334 335 336 337

Downloads
346
Likes
5
Rating
0
P
PrintablesMartin_au

X5SA Pro 330 Z-axis support (Slide in place).

If you look along the Z-axis supports (the ones with the bearings), you'll probably notice that they curve due to the weight of the bed. This was a concern for me as I don't want the bed flexing as more plastic gets added to a print. Many…

Downloads
345
Likes
33
Rating
5
P
Printablessouthbaygsr

Lexus RX330 Key Fob

Car key/fob combinations are notorious for becoming brittle and failing. I scanned the fob internals and designed the case to use M3 SHCS and nuts. 0.2mm, PLA, Sovol SV01

Downloads
336
Likes
26
Rating
5
P
PrintablesElderMillennial

Rak WisMesh 1 Watt Booster 3401 + 13302 Simple Case

I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and…

Downloads
320
Likes
28
Rating
5
P
Printableschking

Bosch BC330 Battery Charger Mount

A wall mount for the Bosch BC330 Battery Charger ( https://www.amazon.com/Bosch-BC330-12-volt-Lithium-Ion-Battery/dp/B00EPE7QU4 ). I've also designed a Slat Wall plate for this mount:…

Downloads
318
Likes
41
Rating
5
P
PrintablesDaishuku

Custom Wheels for Lego Icon 10330 McLaren MP4/4 (Ver.2 uploaded)

Everyone wants a custom wheels for this MP4/4 Lego set are same reason… However, I can't found a after market parts, so I carry on my first try. Project characteristic Blender based project. Referenced to a lot of MP4/4 public source. My…

Downloads
311
Likes
25
Rating
0
P
Printablesdanny243

Scharfenberg coupling type 330 / Scharfenberg-Kupplung Typ 330

Scharfenberg magnetic coupling for model trams and light railways in scale 1:87 (H0) The magnetic coupling can be used for almost all light rail models and many GDR tram models that use Scharfenberg couplings. The printing should be done…

Downloads
309
Likes
12
Rating
0
P
PrintablesEbthing

Dual Lenovo M700 Rack mount kit (also fits the M93p and P330) Tiny PC

Remix of MyStoopidStuff's Under Desk Slide Out Mount For A Lenovo M700 (also fits the M93p and P330) Tiny PC Really liked the design and fit but needed a rack mountable solutions, step file included incase anyone wants to make their own…

Downloads
309
Likes
45
Rating
4.5
P
PrintablesVoxInaudita

Food dehydrator tray extension for 275 mm (10.8 in) or 330 mm (13 in) dehydrators

Tray extension for non-branded food dehydrators which are 275 mm (10.8 in) or 330 mm (13 in) in diameter, so that they can be used to dry filament. Please note that I have not tested the sizing of any of the 330 mm parts as I do not own a…

Downloads
299
Likes
52
Rating
4.6
P
PrintablesBruce

Dosen Deckel für 330ml

Filament: - JAYO - weiß - PLA+ - eSUN – hellbraun – PLA+ Objektgröße: ca. L:B:H in cm Drucker: Prusa MK3S, Bambu Carbon X1 Düse: 0,4 Schichthöhe: 0,2 Infill: 15% Stützen: keine Druckzeit: siehe 3mf/gcode Ziemlich passgenauer Deckel. Zum…

Downloads
288
Likes
9
Rating
0
P
PrintablesAtomicVirology

Logitech K330 keyboard feet

This is a remix of the Logitech K330 keyboard feet. Original was a bit loose - this model is wider to give a solid, snug fit (you need to squeeze feet a bit to install them, like the injection moulded originals). Photos show 0.2 mm PLA -…

Downloads
287
Likes
22
Rating
4.73
P
Printablesantirez

JVC HR-3300 first history VCR

The HR-3300 was the first VCR commercially available. This is a 1:12 miniature I created looking carefully at the pictures on the internet. The test print was performed with an MK4 and a 0.25 nozzle, but this would require a resin printer…

Downloads
285
Likes
138
Rating
5
P
PrintablesShadowChaser

Lenovo P330 Tiny RX6400 PCIe Bracket

This is a highly perforated PCIe bracket for an HP RX6400 that allows it to be used in a Lenovo P330 Tiny USFF system to replace the original Nvidia Quadro GPU. Theoretically any reference low profile RX6400 will also be compatible with…

Downloads
285
Likes
12
Rating
0
P
PrintablesMartin_au

Belt guard for X5SA 330x330

Belt guard for X5SA 330x330

Downloads
266
Likes
34
Rating
5
P
PrintablesEm Jay

Can Holder 330ml, 250ml, 330ml (slim), 500ml

Various sizes. Easy to print. Preferably in PETG. Have fun with it.

Downloads
258
Likes
89
Rating
5
P
PrintablesRayed Farhad

Lenovo p330 1.7 liter PC with RTX 3050 6GB LP

I got this Lenovo P330 Tiny back in March of 2024. I mostly used this as a NAS. Its stock configuration included a 2 GB external GPU, which worked fine for basic tasks. I also played some games on it like FH4, and FIFA 18. While exploring…

Downloads
257
Likes
25
Rating
0
P
PrintablesJavar

cap for the can 330ml and 500ml (d-54mm)

material PLA can 200ml: https://www.printables.com/cs/model/586086-cap-for-the-can-200ml-d-515mm

Downloads
256
Likes
43
Rating
5
P
PrintablesJosh Laurie

Viper 3305v/7345v Alarm Remote Battery Cover

Over the years I would end up dropping the remote a few times, in doing so the battery cover ended up breaking so for a long time I was using tape to hold the battery in, I then got an AnyCubic Photo Mono. From using tape to hold the…

Downloads
256
Likes
11
Rating
5
P
PrintablesF2-Beamer

Metabo DH 330 Dust Adapter to 50mm

Adapter for the Metabo DH 330 Dust Collector to 50 mm

Downloads
243
Likes
19
Rating
5
P
PrintableskevCarrico

C-330 3M Post-It Pop-up Note Dispenser

this is my favorite post-it™ dispenser, and they stopped making them years ago, and i can't find any on ebay, so i jumped into fusion. printing requires no supports, fill the cavities with weights of your choice, i designed it to take…

Downloads
241
Likes
44
Rating
5
P
PrintablesJ6240

Sun Visor for Nikon D3100/D3300 Camera

Printed in Prusament PLA Galaxy Black - 0.10mm Detail - Support on the bed only - 15% infill - 5h42 printing.

Downloads
239
Likes
35
Rating
5
P

LEGO GAZ - 2330 Tiger

LEGO GAZ - 2330 Tiger

Downloads
236
Likes
52
Rating
5
P
PrintablesTomas Horacek

A330 landing gear mechanical model

Print with 0.2 mm layer height Hardware parts: M3 heatset inserts M3 screws 10mm diameter tube a compression spring (100mm long) a tension spring (20 mm long) LM8UU linear bearing LM8UU linear rod (60mm)

Downloads
231
Likes
11
Rating
0
P
Printablesthall72
Downloads
227
Likes
24
Rating
5
P
PrintablesVasilii

Double Wall "Scientifically Tested" 330 & 500 ml Can Koozie

This is a koozie cover for 330 ml & 500 ml aluminum drink cans. There are 3 versions for common can types: “Standard 330 ml” (66 mm diameter, 146 mm height) “Sleek 330 ml” (58 mm diameter, 115 mm height) “Standard 500 ml” (66 mm diameter,…

Downloads
220
Likes
43
Rating
5
P
PrintablesCaveman

European 330mm can handle

This is a remix from stusona's can handle. This handle fits the european 330ml soda cans. Enjoy Print instructions Category: Food & Drink

Downloads
220
Likes
10
Rating
5
P
PrintablesRD Kidd

Radio Stand for Tecsun PL-330

Very grateful to MTMscad for his original, I modified it to perfectly fit the Tecsun PL-330 receiver and added a cutaway (circled in red) to allow the volume knob to turn freely.

Downloads
217
Likes
12
Rating
5
P
Printablesmm0070

Lego 10330 McLaren mount

No supports required.

Downloads
217
Likes
18
Rating
5
P
PrintablesAjay Kamath

Airbus A320/A330/A350/A380 Landing Gear Lever Knob

Preferred printing at 0.1mm steps using any colour ABS or PLA. Print at 100% infill given its a relatively small component and the strength that a 100% infill provides, is required. The knob attaches via a 3.4mm hole that needs to be…

Downloads
210
Likes
10
Rating
0
P
Printablesjose vega

Bracket for Lenovo ThinkCentre M920Q M920 M720Q P330

Bracket for Lenovo ThinkCentre M920Q M920 M720Q P330 Prueba de temperatura: Empieza con un valor bajo, como 220°C, y haz pruebas para encontrar el punto óptimo para tu equipo. La temperatura ideal del filamento PETG suele estar entre…

Downloads
207
Likes
14
Rating
0
P
PrintablesBGDglider

Can holder for 330 ml cans with rotating protection lid – easy print

Can holder with rotating protection lid – easy print A minimalist can holder for standard 330 ml cans. The can is inserted from the top and clicks into place at the bottom; removal works in reverse. The holder grips the can using its…

Downloads
204
Likes
45
Rating
5
P
PrintablesSir Thommes

Reduzierung 100mm Schlauch auf Metabo DH330

Eine Reduzierung von 100mm SSchlauch auf den Anschluss der Absaugung für eine Metabo DH330. Der Schlauch wird an diese Reduzierung angeschlossen. Dann kann der Schlauch mit der Reduzierung an den Dickenhobel Metabo DH330 aufgesteckt…

Downloads
203
Likes
9
Rating
5
P
PrintablesPoty

Fujitsu RX1330 HDD Caddy a3c40152045 2.5" & 3.5"

Caddy designt for the Fujitsu Server RX1330 M1. (Maybe it can also be used on newer generations) The caddy is designt for transparent filaments, you can see the HDD status LED on the front. INFO: 2.5" caddy needs support! ...the 3.5"…

Downloads
203
Likes
9
Rating
5
P
PrintablesDror Cohen

Beverage Can Dispenser EU 330ml (11.2oz)

Nested and keyed Beverage Can Dispenser for standard Europeans sleek/slim soda cans (330 ml / 11.2oz). Holds seven (7) cans. Model is split into two halves so it can be printed on a standard size printer (bed size ≥ 20cm). The two halves…

Downloads
203
Likes
20
Rating
0
P
PrintablesLiquid_Squid86

SimbaSim Runsco 330mm Steering Wheel Button Box

A simple Touring Car/Rally style button box for the affordable Runsco 330mm Steering Wheel. The ideal low cost way of converting a real steering wheel into a Sim Racing accessory for your sim rig. The steering wheel specification consists…

Downloads
199
Likes
35
Rating
5
P
PrintablesDickens

Prost version LEGO set 10330 McLaren Formula 1 car tyres/wheel with logo's

I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh

Downloads
199
Likes
29
Rating
0
P
PrintablesRadim

330ml can bike holder

A remix of a can clip for EU 330ml narrow cans.

Downloads
194
Likes
24
Rating
0
P
Printablesthall72

Lego Compatible (33078.dat) Minifig Food Sausage

This model is compatible with the lego system.

Downloads
192
Likes
30
Rating
5
P
PrintablesAndrea

Mamiya C330 lens cap

This is the cap for the 80mm Mamiya lens. I obtained a good result with PLA and 0.4mm nozzle (0.2mm layer). Enjoy!

Downloads
188
Likes
13
Rating
0
P
Printablesthall72

Lego Compatible (33085.dat) Minifig Food Banana

This model is compatible with the lego system.

Downloads
188
Likes
28
Rating
0
P
Printablesdave

VzBot 330 compact HEPA fan housing

The original is larger than it needs to be; this saves print time, material and back panel space.

Downloads
188
Likes
30
Rating
5
P
PrintablesPrintyPaws

Airbus A330-300 airplane

Realistic Copy of the Airbus A330-300 Comes with: Colored Airplane (No splitting) Non Colored Airplane (No Splitting) Non Colored Airplane (With splitting) Layer height: 0.2 mm (0.12 mm for sharper surface detail) Infill: 10–15% (display…

Downloads
187
Likes
12
Rating
0
P
Printablesthall72

Lego Compatible (33051.dat) Minifig Food Apple

This model is compatible with the lego system.

Downloads
186
Likes
31
Rating
5
P
PrintablesKLAM3R0N

Rak 1w booster 3401 - 19007 13302 1w booster electrical enclosure mount + other electronics mounts

New added some new rev files that should allow for stacking of support electronics using standoffs between layers, and slimmer rak 3401 mount and a clip to hold the antenna on tight. 4/26/26 Mounting brackets for electrical enclosures…

Downloads
175
Likes
20
Rating
4
P
PrintablesHandy Remstad

ADT UT3G eGPU Enclosure - 330mm GPU support

This is a remix (of a remix) of a eGPU enclosure. The previous models were made for smaller cards, this one in theory can fit a 330mm gpu. For more information about this enclsoure, check the original models. Please note this is the first…

Downloads
173
Likes
5
Rating
0
P
PrintablesSandfrog

Battery Pack for Recycled 13300 Akkus

Battery Pack for Recycled - 13300 from disposable E-Cigarettes. https://www.printables.com/de/model/1008015-battery-pack-for-recycled-801640-fake-akkus

Downloads
170
Likes
22
Rating
5
P
PrintablesPrint en Design
Downloads
168
Likes
10
Rating
5
P
Printablesmhparsons

V2 Beverage Can Dispenser- Six 330ml cans

Nested and keyed Beverage Can Dispenser for standard 330 ml. Euro cans. Holds six (6) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…

Downloads
167
Likes
30
Rating
0
P
PrintablesStuart

Mamiya C330 Lens Cap

I printed this in TPU filament on an Ender 3. This fit on my Sekor 80mm lens. It could fit on other lenses with a diameter of 48mm.

Downloads
167
Likes
10
Rating
0
P
PrintablesJim

cupholder adapter skoda octavia (250 or 330ml can)

I designed this adapter for soft drinks mainly for skoda octavia 3, but it could works with other cars. You can find two versions - for 250ml ("red bull" ) or for 330ml (soft drink) can

Downloads
165
Likes
13
Rating
0
P
Printablesthall72

Lego Compatible (33057.dat) Minifig Food Turkey Leg

This model is compatible with the lego system.

Downloads
165
Likes
30
Rating
5
P
Printablescolossatr0n

osVAC M32-R65 (65 mm Metabo Planer Adapter DH330)

This is an osVAC adapter for the Metabo Planer DH330. The larger end has an inner diameter of 65.5 mm. Printed with 50% infill, a brim, and the large end touching the bed. ********************* Dies ist ein osVAC-Adapter für den Metabo…

Downloads
162
Likes
17
Rating
5
P
Printablescriss623

can dispenser for 330 ml

this is a simple remix changing the pattern on the sides and saving some material. I used supports on the baseplate only (snug type) 0.2 layer height, 10% infill, 3 walls, 4 bottom/top.

Downloads
160
Likes
9
Rating
0