Gardena 3500/4 G1 Stopfen
Ersetzt den vorhandenen G1 Stopfen auf der Oberseite der Punmpe (s. Foto) den vorhanden O-Ring einfach bei den neuen Stopfen verwenden.
- Downloads
- 12
- Likes
- 1
- Rating
- 0
Counting matching models…
Ersetzt den vorhandenen G1 Stopfen auf der Oberseite der Punmpe (s. Foto) den vorhanden O-Ring einfach bei den neuen Stopfen verwenden.
universal base for all ball mount. the ball is 17mm the mag sage base tested for 3 month. printed in abs … use 3m tape to hold the magsafe and stand in the car . fits large phones … i have iphone 14 pro.
A quick-release clip for the strap that came with the Canon EOS M50. Just push/pull the clip against the metal fixture facing the gap. I recommend printing in PETG or similar at 100% infill, 3 perimeters. The print orientation makes them…
These are models for the RainBird 3500 rotor irrigation's nozzles. Unfortunately RainBird does not sell the nozzles for this specific model on a standalone basis. So if its lost then a full new rotor is required. In order to overcome this…
Designed this phone adapter for a RAM mounting system. Included is a version that supports a Galaxy S24 phone with a slim case, as well as a Google Pixel 6. I'm happy to make mounts for other phones if you can help me by providing the…
ram hitch cover with blank plate or with logo ... fell free to add any logo to the blank plate . enjoy. fits hitch 2.5" only. printed in petg ans asa logo can be print in pla
This is a replacement knob for the Predator 3500w Generator. It is used for the Off, Choke and Run selector. The knob connects to the metal shaft on the generator with a machine screw. Not sure of what size as it was hit or miss for me. I…
This model guards the knobs on a Motorola XPR 3500e so the volume and channel aren't accidentally changed. I finally got fed up with the volume and channel settings of the radio being changed by rubbing against my clothes as I walked…
Having developed an interest in ultralight fishing I wanted smaller scale storage options for the variety of techniques I've been experimenting with. Updated 10/3/2023 - Added missing radii at bottom because the previous version did not…
Does not fit other 3500 series boxes like the 3550 and 3570. Print: .20mm layers, two layers top and bottom and 15% gyroid infill works best for me. PLA is more than adequate, and PETG gets you warped dividers. Thanks to hobobandy for the…
These inserts are slightly taller than the walls of the box. I use these for very small tackle so this helps prevent anything from flying all around the box. The octo insert is for the shorter spot in the middle of the box.
The Plano 3500-series tackleboxes make for pretty solid parts storage. They're solidly injection-molded with clips that are a huge upgrade from those cheap “kit boxes” that come with the typical maker “assortment" packs. There are plenty…
A tool to assist in the removal and replacement of the Rain Bird brand 5000 & 3500 series 4in rotors. The design is slightly different for each series, both STL files are included along with the Fusion file which is parameter driven.…
Sprinkler head grass protector for rainbird 3500 or 32sa, it keeps the grass from getting caught by the sprinkler rotating head. I printed mine with PLA, but I will be reprinting it in PETG because it is going to be outside in the sun.…
Small and simple wall-mountable holder for Wera T-Grip * (like 416 R). Easily printable without supports. * = Amazon Affiliate Links
Do you love the razor hand mount, but wish that BigBlue's TL3500PS had a properly sized mount? Now you can print your own. This will probably fit any BigBlue light that has a 63mm diameter head and a goodman mount on the light head, or a…
This is a backup camera mount that replaces the tailgate handle bezel. 3MF Notes : The 'NO AMS' file uses standard support settings, and does not require an AMS The 'AMS' file uses a different material for supports, and requires an AMS.…
Eine Halterung zwei teilig (Kiste und Montageplatte für CO Dräger Pac 3500.
I did not like how corsair left the front fans so exposed so I made a front face plate to cover the front of the fans and they're cables. I printed these from polymaker abs. There is step models for a two piece print and a one piece…
The battery door on one of my computer mice got lost, luckily I have a few more of the same model so I could measure the door and make a new one. This was a tricky model to design because of all the curves, I scanned another door with a…
Rotate the model 180° in the x-axis or y-axis and 3D print with supports. Please give a HEART for the download! We like to collect them. ;-) PRINT SETTINGS: Total time → 42 min Number of print files → 1 Layer height → 0,2 Layer width →…
My original Nikon D3500 lens cap broke (one of the plastic springs broke apart). So I decided to remix the D3100 lens cap to one for the D3500 by scaling it up a bit. I installed it not with the printed springs but with actual springs…
This is a Wall Mount for a Sainlogic WS3500 Weather Station Receiver
Leg extenstions to raise the height of a Corsair 3500X case (or similar) 50mm or 80mm off the ground. Suitable for improved fan clearance on carpet. Both 50mm and 80mm files provided. (80mm shown in photo) Printed in PLA with 15% infill.…
This adapter allows you to use inexpensive Amazon 1.5 DIN stereos in your Chevrolet OBS. It is compatible with 1995–1998 dashboards. 3MF Notes : The base file uses ABS as the primary filament and PETG as the interface layer. If you do not…
Update: 4/30/2025, reduced the size of the plate mounting holes so M3 screws will bite into the plastic. I got the Corsair 3500x case and found that it had a hard drive mounting plate designed for two 2.5 and two 3.5 drives. I had four…
This tailgate handle bezel will fit all 1988-1998 OBS style Chevrolet pickup trucks 3MF Notes : The base file uses ASA as the primary filament. ASA is recommended due to the outside temperatures and UV exposure. ABS or PETG can be used,…
The Chevrolet Express van knob swap for the A/C controls is a common mod. This allows you to use the same style of knob for your light switch, so all of your knobs can match! 3MF Notes : The base file uses ABS as the primary filament. ABS…
Strap around the back of the head for a head-size pull-down system.
Printed the original model to figure it doesnt exactly fit mine. Redraw it as close i could but it's far from perfect. You will have to do mild plastic trimming here and there. This fits only Trotec PAC 3500 SH I've used large inserts…
Hose_pt2 is for multicolor, but if you don't split it you can print it in one color. I added the step and Fusion 360 files if you want to make any adjustments. I used: M3x10 Cap head - 6pcs M3 nuts - 6pcs M5x40 Cap head - 8pcs M5 nuts -…
Deutsch (english below): Für mein Aquascape in einem Juwel Lido Aquarium benötigte ich eine extrem helle Lampe mit einer Breite von 60cm. Mein Ziel war: preiswert, sehr hell, nah am idealen Lichtspektrum und optisch ansprechend. So ist…
Inner Rim is 120.25mm, Easily resized for your needs. Outter rim cover is 126.9mm. Relief cuts make for a good friction fit. I printed in PETG and seems to be holding up perfect. PLA will distort in sun.
Maserati 3500 GT 1957-1964 Racing
A simple wall bracket so that the small cylindrical base station Arlo VMB3500 can be mounted on a wall. Brings better order to that shelf with the router and everything. :-) Print in PLA or PETG.
These amplifiers stock mounts are made out of weak and low quality plastic, you can print these to serve as a stronger alternative. you will need to print 2 of each to replace both stock mounts as this one is in 2 parts, also there is…
tisk našikmo s podpěrami pro lepší pevnost Petg, nebo PA 12 CF15 vrstva 0,16 mm, tryska 0,4mm
Holder for a Dell Latitude 3500 and D6000 docking station. Includes a mount for a PC case fan.
I got a good deal on this generator about 20 years ago due to the shipping damage on the end housing. It looked bad, but didn't impare the function. I looked at it the other day, and thought “Hey, I have some nice 3D printers now, I could…
A common failure point on the factory switch is the post which actuate the slide switch. This design beefs up the posts an extra 0.6mm. 3MF Notes : The base file uses ABS with PETG for the interface layers. An AMS is required. The NO AMS…
This was designed to mount furrion vision s screen for RV backup camera. printed with PetG 6 wall loops and 59% infill. Must print with suction platform down on smooth bed.
An adapter to mount a 40mm fan on the 3DFX Voodoo 3 3500 TV, this clips under the heatsink and screw to the two holes at the back using 2x2.5mm screws. Print with support under the hook. I used PLA, don't be me, use PETG.
My original handle broke, so I designed this replacement emergency break release handle for Chevy Express 3500 Year 2001 I do not know what other models or years it might also fit.
I designed replacement clamps for both the upper and lower clamps, though I have only tested the larger upper clamp myself. There is a small white piece of plastic between the clamp and the tripod leg. This piece is also required when…
If you like this model, please give it a like and download it so I can justify making more! Here is a winch cover I drew up in FreeCAD. It can be printed as two parts or one. The 3MF file is already set up for both. No need for support,…
Gone are the days of using masking tape and PTFE tubing for this repair! I recently bought an untested Bell and Howell 3580 (made by Eiki, equivalent to the SSL-0), knowing it needed some repairs. As I got online to research the issues I…
This replaces the scroll wheel that broke in your Microsoft mouse. I printed it in PETG for a bit of flexibility since pressing on the wheel causes it to bend slightly. It is important to print it with the axle horizontally for strength.…
For more details about how I made this, check out my Hackaday Contest Entry - Repairs You Can 3D Print. https://hackaday.io/project/57042-home-repairs-with-a-3d-printer/ Print instructions Unassociated tags: bobbin replacement, sewing…
This model is based on the original rubber cap and it can be basically printed from any material I got mine from TPU. Instalation is very easy you just put the side with ledge first and just push the other side on mine fits perfectly and…
The Chevrolet Express van knob swap for the A/C controls is a common mod. This allows you to print a matching knob for your light switch. 3MF Notes : The base file uses ABS as the primary filament. ABS or better is recommended due to the…
Correctly sized seals for a 1969 tractor are getting hard to come by. This includes all the perishable parts to repack the hydraulic power steering cylinder on a Ford 3500 industrial tractor. The gasket and wiper should be printed with…
If you own a Samsung range with these knobs, you've probably already experienced the failure, or eventually will. The plastic hub inside the knob that interfaces with the metal control shaft develops cracks over time from repeated use and…
i recommend v4, but v3 willk also work v1 is a bit too short for my liking (yes I know that i created it, cant I make mistakes ?)
Unofficial dimensional reference model for the Rigol RP3500A oscilloscope probe. This is intended for designing holders, trays, Gridfinity inserts, scope accessories, and other bench tooling around the RP3500A probe. This is a…
Rigol RP3500A probe holder for ERGO-FLEXI-FIX Stick the probe in here and zip tie or twist tie it down. Source Source files are available on Github .
Korg Concert C-3500 — Power Connector Replacement (Snap-fit, 2-part) Replacement for the proprietary AC power connector used on the Korg Concert C-3500 and compatible vintage Korg keyboards (DSS-1, DS-8, DW-6000, DW-8000, M1, T-series).…
Designed this phone adapter for a RAM mounting system. Included is a version that supports a Galaxy S24 phone with a slim case, as well as a Google Pixel 6. I'm happy to make mounts for other phones if you can help me by providing the…
Leg extenstions to raise the height of a Corsair 3500X case (or similar) 50mm or 80mm off the ground. Suitable for improved fan clearance on carpet. Both 50mm and 80mm files provided. (80mm shown in photo) Printed in PLA with 15% infill.…
I did not like how corsair left the front fans so exposed so I made a front face plate to cover the front of the fans and they're cables. I printed these from polymaker abs. There is step models for a two piece print and a one piece…
This was designed to mount furrion vision s screen for RV backup camera. printed with PetG 6 wall loops and 59% infill. Must print with suction platform down on smooth bed.
An adapter to mount a 40mm fan on the 3DFX Voodoo 3 3500 TV, this clips under the heatsink and screw to the two holes at the back using 2x2.5mm screws. Print with support under the hook. I used PLA, don't be me, use PETG.
This model is based on the original rubber cap and it can be basically printed from any material I got mine from TPU. Instalation is very easy you just put the side with ledge first and just push the other side on mine fits perfectly and…
A simple wall bracket so that the small cylindrical base station Arlo VMB3500 can be mounted on a wall. Brings better order to that shelf with the router and everything. :-) Print in PLA or PETG.
Stake bed cover for GMC Sierra 1500-3500 pickup. Print in PETG or better.