80 models
This very easy print can be swapped into the Ender3Pro within one minute and improves the part cooling capabilities significantly, without the need for a new fan. There are numerous highly respected YouTubers out there that have shown…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
es kann wird wie auf den Bilder gezeigt ein Magnetic Wireless Charger eingebaut werden um da Handy auch zu laden. der Halter passt in den orginal BMW-Navigator Halter und kann auch abgeschlossen werden link zum Charger:…
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for one variant
A complete kit to mount the Topping MX3s Amp+DAC, Remote and Power Supply neatly on the underside of your desk, or anywhere else you'd like to put it! Other Topping Amps / DACs These parts were designed for the MX3s. However, some parts…
Print approx. €6.37–€7.79 excl. taxPreliminary estimate for PETGSource material: PET
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Please Like and Download my design so I have a chance to get Prusameter bonus, thanks ! A small and easy to print clip, to hold the Bowden tube and the cables together. Fits Ender 3, 3Pro, 3v2, CR-10 Voxelab Aquila, and in fact any…
Original Elegoo tool holder V2
This is probably one of my favorite version of a duct for the ender 3, decided to add it on here to help those who may find it helpful. [Originally Uploaded by: KingYS on Thingiverse] [Original Description] Print Settings: 100 % infill…
Like may other people with an interest in photography, I have a fairly large collection of round screw-in filters like ND, Polariser etc. These are somewhat of an investment so I wanted a way to use these filters on my iPhone 13pro…
You'll need four M5x12 and eight M3x6 for the linear rail block (M3x8 might work too, not sure) To install it, partially screw in the screw into the hex nut (use the stock ones) to lift the nut, and place the mount over the rail block…
Good morning, Welcome to my profile, full of models and miniatures :-) I have for you covers for the Iphone 13 / 13 Pro / 13 Pro Max. They are beautiful and practical. At first glance, they will amaze you with their design. Printed…
Please share your feedback or questions :) Don't forget to "like" and post your makes ! Thank you ! Enjoy it ! This is a remix from Scratch model (thanks for the original design !) It suits very well to my Ender 3 Pro. You will find 3…
This is an enhanced version of the original controller holder, to match with the BoboVR S3 Pro (and maybe other head straps). Changes: * added ramps to the side, that places the head strap/quest always centered to the holder. * added a…
Note: Only one support is needed at the bottom where the power plug connects. I have no clue what that little cutout left of it is for, or if we really need it. It was there on the hull you receive when you buy one, so I did the same…^^"…
Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!! With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees.…
Note: The 9 Hour print time is because all mounts are being provided on one plate. If you want one specific mount, download the appropriate STL File single Camera Wall Mount Double Camera Wall mount Single Camera Soffit Mount Double…
Made this as a simple phone holder that i taped to the wall in my shower so i can use my phone but not have to stress during the print and have a very very simple print any remixes are welcome please download and also check out my youtube…
This bracket was originally designed by audiorazor, and allows for the installation of PTFE tubing into the Palette 3, and 3 Pro. I personally was having problems with my filaments pulling themselves out of the Palette just because of the…
Simple cold shoes for any accessories you want to put on the side of the gimbal. I only have the DJI RS3 but should fit the RS2 and RSC2 and you need 2x M4 screw to mount it to the gimbal
Chest of drawers for Ender 3 Pro (only). Not for Ender 3! No Scews or bolts. Please take a look at my other models and like them.
This is useful for hotend mounts that moves the hotend forward (like all of my designs for top mounted hotends, and likely many other), which usually lead to lost printable space, this gains 10mm back, for the full 235mm in Y But does…
Этот файл подходит для: Elegoo Neptune 3 Pro Elegoo Neptune 3 Plus Elegoo Neptune 3 Max Elegoo Neptune 4 Elegoo Neptune 4 Pro Elegoo Neptune 4 Plus Elegoo Neptune 4 Max УДАЧНОЙ ПЕЧАТИ!
4040 extrusion endcap with ender logo Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 20 Filament: doesn´t matter does´t matter transparent Category: 3D Printer Parts
Base model for Btt PI 1.2 to be installed under the hole cut in the front panel of the printer. https://github.com/SerJ1us/Neptune3Pro Relevance of the instruction first half of 2025.
This is a simple means to mount a 4020 blower to an Ender 3 Pro. Unlike many other designs, performance has NOT been verified with CFD :) But, I can confidently say that cooling is improved over stock and this machine will print bridges…
This not meant for your stock belt, but in the event that you swap it to a fresh one. Print in PETG of better, no support needed Supports ender3pro / 3v2 / 3max 3max neo beds Disclaimer: After install there's a small chance that a belt…
This mod dramatically improves the hotend performance of the Ender 3. The "coldend" will be cooled way better compared to the original cooling solution. Also, the performance of the part cooling fan is increased significantly. The overall…
This filament guide for the Ender3pro is designed to be used with a Bowden tube and 2 push in fittings. In my case I used the stock parts of the printer after upgrading the Bowden tube. There are 2 parts in this design: 1 - Filament Guide…
YAHME3 -Yet Another Hemera Mount for Ender 3pro But its based on the existing metal x carriage mount so you do not have to dissasemble the whole printer Uses stock backplate leaving access to all attaching screws bl touch mount endoscope…
Upgrade to Stealthburner toolheads on the Tenlog D3Pro
This is to help feed all 8 inputs into a mosaic palette 3/3 pro when using a spool holder like the one that it came with
Spool holder for dremal spools narrower diameter. Attaches to existing spool holder allowing you to hang 2 spools as well if you wanted to, It pushes though the center of the existing spool holder. It's a snug fit but cannot fall out the…
Just another PSU fan cover for E3PRO Meanwell LRS 350 24V. I did not like any model so I made this one from scratch with some Witcher features, but uploaded “classic” version for not Witcher fans. Use supports. Tested with 92x25mm Noctua…
Supports de fixation pour monter des rétroviseurs du modèle suivant : https://fr.aliexpress.com/item/1005006240911627.html?spm=a2g0o.order_list.order_list_main.41.5b315e5b4D4Zaq&gatewayAdapt=glo2fra Si j'ai choisi ce modèle, c'est parce…
This is a mount to attach a BLTouch to the original Extruders on the Hictop D3 Hero and Tenlog D3 Pro. This requires no screws or other hardware to attach it to the machine as it just clips securely on to the extruder. I bought a BLTouch…
My Second Attempt at a Case for My New Phone Two Parts: Case Camera Protection: Glue in position or leave it clamped when the phone is inside. All files are uploaded, including the Fusion360 file for easy modification. Feel free to go wild
YAHME3 -Left Flipped Hemera Mount for Ender 3pro The hemera on this is reversed - i forget why - But its based on the existing metal x carriage mount so you do not have to dissasemble the whole printer Uses stock backplate leaving access…
I designed this to replace the stock Z v-rollers with linear rails. Print the mirror image for the other side. Make sure to remove the built in support after printing. There is also a Z motor mount included. I used LDO MGN12H x 450mm…
Supporto per attrezzi per Creality Ender3 Pro da montare sull'alimentazione. Se apprezzi il mio lavoro e ti va di farmi una donazione =) Print instructions Category: 3D Printer Accessories Summary Supporto per attrezzi per Creality Ender3…
Elegoo N3PRO Filament Clip SHORT
Take 360° Panorama Pictures with your iPhone 12Pro / iPhone 13Pro at 0.5 focus. With another case (Halterung) it's maybe possible to do it with an other mobile phone. You need a tripod and a 360° Rotator to take pictures, a stiching app…
Remixed from Arducam Mount I used screws M3X25mm or 2.5X25mm Print Settings Printer brand: Creality Printer: Ender 3 V2 Rafts: No Supports: No Resolution: .2 Infill: 20% Filament brand: Sunlu Filament color: Black Filament material: PLA…
Remix based on model from Stuff Maker
I wanted to put a phone mount behind my steering wheel for navigation on my old 1996 Toyota Rav4. I have an iPhone 13 Pro that I use on my commutes on the interstate to/from work. I wanted more of a “heads up” display that let me drive…
Mount for Octopus Board. I also used VGA breakout board connectors to run the wiring from the serial cables. https://www.amazon.ca/gp/product/B07P6R918T/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Recently, an unpleasant incident occurred, the filament was clamped on the coil and as a result, the filament holder broke.Therefore, I added a more reinforced holder model.
Move audio from side to front through two internal cores
Apple 13Pro Dock - Charger for the supplied cable. Category: Mobile Phone
I broke one (of 2 delivered) original Segway Ninebot Mirrors-Silikonbelt for F3/F3Pro/MaxG3/ZT3. So, for fast repair, I construct a compatible holder only. The original is for shure the best Material (Silicon?) but this here can be…
So I also wanted a rear cover for my Creality Ender 3 Pro but everything on all the download sites were for ones that has been modded with rear fitted mainboards or arduino's or Raspbery Pi's etc etc etc.. While I only wanted an enclosure…
In concert with Javier M. G. s model here: https://www.printables.com/model/53164-prusa-i3-mk3-mk3s-mk3s-lcd-flat-cable-clip This cover snaps onto the clips and covers your LCD ribbon cables. This is a nice upgrade to hide unsightly…
Here are all Parts you Need for the Conversion from Stock to Prusa I3 MK3S Style. Parts included: MK3S Extruder Mount (Bowden Style) MK3S Extruder Cover (Bowden Style) MK3S Extruder Mount (Direct Drive) MK3S Extruder Motor Bracket (Direct…
Ender 3Pro PSU cover for Noctua NF-A6x25
Simple adapter to mount Fysetc Spider motherboard to Tenlog D3Pro Category: 3D Printer Parts
Replacement part for the geetech i3prob. Orange part in the picture.
добавлено второе отверстие для более крепкой фиксации
Headboard mount holder for a ThundeaL TD93Pro projector or other appropriate. initially, the mount is straight, if you need an angle, an additional angle expander is attached, you can also download the project and convert it to Fusion360
Increased wallthickness to improve reliability. Material: PA6-CF Layer height: 0,1mm Infill: Solid Press bearing in before mounting it on the shaft.
Extension of the moving bar(pink) and rotation by 90°. This gives you a better view with the beaglecam on the neptun3pro. Print with 0.2 layer without upport with pla.
Next to V009, also BIT-X and V013PRO PCI Risers fit. Update: Please use the original model, which includes even more risers now.
Printed with Support Only touching Build Plate Filament PLA+ 0.2 MM layer height All other pars from original posting are still needed.
extruded the impossible triangle logo onto the blank cover using fusion 360 print using whatever settings you want or have been previously recommended Category: 3D Printer Accessories
Thermostat V3PRO _ Hülle mit Deckel zur Montage am Terrarium (kleben)
Hi friends, Do you have a Geeetech Prusa I3 Pro B printer? You have not reprinted the body and the structure of your printer looks like the one you have assembled the first day? Then you can print this Tools Holder. It uses the front of…
Hi friends, Do you have a Geeetech Prusa I3 Pro B printer? You have not reprinted the body and the structure of your printer looks like the one you have assembled the first day? Then you can print this Tools Holder. It uses the front of…
Any of the other ones I found didn't have a large enough slot at the back to fit the ribbon cable through. You'll have to remove the end cap to slide the adapter on. The pictures show it on the inside because I have used another mod to…
I shrank the spool holder and the the spool mount outside part, I am currently printing and will add other sizes in the future
The changes from adafruit's iPhone 13 Pro + Mini Flexible case are pretty minimal: I added some vertical members on either side of the charging port to help bridging, but in the end I printed with tree supports. The PrusaSlicer .3mf file…
I wanted a tish more adjustment up/down on the Eddy probe mount, to match the recommended offset by BTT with the nozzle. The model assumes one would use the stock hotend I assume. (I have a phateus.) I added slots to the back of the mount…
The changes from adafruit's iPhone 13 Pro + Mini Flexible case are pretty minimal: I added some vertical members on either side of the charging port to help bridging, but in the end I printed with tree supports. The PrusaSlicer .3mf file…
I wanted a tish more adjustment up/down on the Eddy probe mount, to match the recommended offset by BTT with the nozzle. The model assumes one would use the stock hotend I assume. (I have a phateus.) I added slots to the back of the mount…
Upgrade to Stealthburner toolheads on the Tenlog D3Pro
I designed this to replace the stock Z v-rollers with linear rails. Print the mirror image for the other side. Make sure to remove the built in support after printing. There is also a Z motor mount included. I used LDO MGN12H x 450mm…
There is room for improvement and addon but it's a good solid starting base, installed, tested and in use on my printer. As of now it's compatible with Octopus mounting point ( v1.1, pro, EZ max ) and stock ender board pattern ( 4.2.2 &…
This is a fully redesigned Y axis setup, meant for ender3pro, ender3v2, ender3max neo and similar 4040 profile Y extrusion, front and back end holes needs to be screw tapped for M5 (already the case on ender3v2, and confirmed to be the…
