Search results: 4056

Sort order

102 models

Lithium Battery Charger Li-ion Module TP4056 USB C mock up

This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…

Downloads
1,977
Likes
71
Rating
5
P
PrintablesJori

TP4056 18650 battery charger

I recently got hold of a couple of notebook batteries... ... So I needed a battery charge and test setup. I build a charger holder around my battery booklet thing: https://www.thingiverse.com/thing:4113164 This adds a piece for the TP4056…

Downloads
1,839
Likes
218
Rating
4.76
P
Printablesysengard

Protective Case for TP4056

Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…

Downloads
1,413
Likes
125
Rating
4.83
P
Printablesliangodesigns

tp4056 usb-c model li-ion charge circuit 3d model

In case you want to design a part that includes a tp4056 charge controller.

Downloads
1,268
Likes
28
Rating
0
P
PrintablesYXC

N in 1 18650 TP4056 Charger

A holder for the TP4056 lithium Battery charging board (25*19mm). UPDATE:2018/10/01 V2 Fits most of TP4056 boards. Fits most of 18650 batteries with protection circuit. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill:…

Downloads
978
Likes
151
Rating
4.78
P
PrintablesBehnam

TP 4056 TYPE C MOUNT

TP 4056TYPEC module frame

Downloads
610
Likes
55
Rating
5
P
PrintablesGabrielT

TP4056 Li-Ion charger module case

Small case for the TP4056 charger with a window for the status LEDs.

Downloads
599
Likes
56
Rating
1
P
Printablessej7278

TP4056 Case

This is a holder for the newer TP4056 LiPo/Li-Ion charger boards with the micro USB connectors and DW01 and 8205 chips and IN/OUT pads - not the earlier mini USB with fewer chips and pads, although they may still fit or you could edit the…

Downloads
577
Likes
38
Rating
5

Type-C USB 5V 1A 18650 TP4056 Lithium Battery Charger Holder

A tight-fitting mesh for a Type-C USB 5V 1A 18650 TP4056 Lithium Battery Charger Drop it into your model and the component fits so snugly in the recess that you don't need anything else to keep it in place

Downloads
551
Likes
62
Rating
0
P

TP 4056 1A 18650 21700 CHARGER for 10 cells

This is a Li-ion charger compatible with 18650 and 21700 cells. Charges up to 10 cells. requires a 5v power supply at least 10A. I recommend 15A to avoid overheating. Each cell has its independent charging module TP4056 or TC4056. The…

Downloads
543
Likes
84
Rating
5

18650 Battery USB Charger TP4056

This is a charging holder for a single 18650 lithium ion battery. It uses the TP4056 charging board, that you can get easy on eBay. (Search for "lithium usb charger" or "TP4056") The battery contacts used are 10x10mm but you can use…

Downloads
505
Likes
84
Rating
5
P
Printableskyleireland

SlimeVR DIY Case - BM160 - Lolin Wemos D1 Mini V4 - TP4056 - 1800mAh Battery - 2P2T Switch

Information SlimeVR is an open source Virtual Reality Body Tracker project. I designed this case to house some components following the SlimeVR schematics. This is my first time making a case to fit a bunch of components and the first…

Downloads
492
Likes
31
Rating
5
P
PrintablesNadir @ CN3D

Print in place spring loaded 18650 Battery cell holder / charger TP4056

This is work in progress next update will be adding an NTC for more safety. Edited 19-12-2022 : added a little how to and some Data, Features & Technical Specs After multiple prints and test I finally came with a design that I'm satisfied…

Downloads
453
Likes
58
Rating
5
P
PrintablesS. Barsoumian

TP4056 enclosure

Update 10/11/2024: Updated the design to include a light indicator for both Type C and Micro USB, featuring two different sizes and open cable slots for easy access. make the connector hatch more round This contains the TP4056 in a very…

Downloads
434
Likes
43
Rating
5
P
Printableszeroeffekt

TP4056 18650 Holder Charger

TP4056 18650 Holder Charger the TP4056 slides in to place from the front and doesn't need any glue to stay in place. Positive Wire is about 25mm Negative Wire is about 95mm the contacts are for AA batteries and come as one piece, I cut…

Downloads
397
Likes
44
Rating
5
P
Printableszuberio

1S2P 18650 Vase Mode Holder With TP4056 & MT3608 Boards Slot

This is a vase mode print I designed to hold 2 18650 cells as well as a TP4056 charge/protection circuit & MT3608 DC-DC boost circuit. Here's the link to where I bought the circuits from. https://a.aliexpress.com/_mNJGjrV 0.2mm layer…

Downloads
359
Likes
86
Rating
0
P
Printableszuberio

Heltec V3 Case with 18650 cell and TP4056 charge controller

My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…

Downloads
348
Likes
72
Rating
5
P
PrintablesRed Haniwa

Case for TP4056 lithium charger with strain relief

Added strain relief feature to the original design. The case is longer to accommodate zip-tie, but it's pretty minimal (4mm longer). Need re-orientation, but can print without any supports. Printing filament: Original designer called for…

Downloads
301
Likes
41
Rating
4.67
P
PrintablesMadeBySaints

TP4056 Snap Case

A slim case for the TP4056 charging module for 18650 batteries. Features a hole on the back for exit wires/battery connection, and a form fitting opening for the usb-c on the front. This model was designed from the ground up to be fast…

Downloads
298
Likes
13
Rating
0
P
PrintablesLegacy_Micro

BASIC MODEL: TP4056 USB - C Lithium Charge Module

BASIC MODEL: TP4056 USB - C Lithium Charge Module

Downloads
289
Likes
14
Rating
0
P
Printables_KaszpiR_

18650 charger via HW-373 TP4056 USB-C module

About Quick and ugly remix to allow charging 18650 via HW-373 TP4056 USB-C module, which has larger diameters. The external dimensions are the same. Lithium Battery Charger Li-ion Module TP4056 USB C mock up was used to alter original N…

Downloads
278
Likes
39
Rating
5
P
Printablesvoyczech

TP4056 mockup

designed mockup model of TP4056 USB-C charging module for representation in bigger assembly

Downloads
277
Likes
20
Rating
0
P
PrintablesMark

Simple TP4056 Housing

Simple TP4056 Housing. Created in FreeCAD. Ender 3 v2, Generic PLA, 0.4mm nozzle, 0.2mm Layer height.

Downloads
228
Likes
28
Rating
0
P
Printablesped

Case for TP4056 Li-Ion Battery Charger

Desgined for the TP4056 Li-Ion charger modul. You can see through the small hole on the side the current charging status (red = charging, blue = charged).

Downloads
190
Likes
25
Rating
0
P
PrintablesJimbob

4x 18650 multiple battery charger with space for 4056 circuit

Why charge one 18650 when you can charge up to 4 at a time! It just takes 4x as long of course. This also has a slight extension on the space available for the 4056 circuit, as the original design didn't fit the ones I have (which have a…

Downloads
175
Likes
23
Rating
0
P
PrintablesNick_Groot

18650 cell USB charger for TP4056

Yet another charger housing. I found several similar things here, most are made to fit the (old?) PCB layout of the TP4056. Found few for the new PCB, but didn't really like the unprotected PCB and other detail. Now this is to be used…

Downloads
174
Likes
14
Rating
5
P
Printablesprojectronic

TP4056 LX-LCBST type screw mount Parametric

TP4056 LX-LCBST type Drawn using Freecad. Easy customization by changing the value in the Spreadsheet

Downloads
164
Likes
17
Rating
0
P
Printablesdanny6869

Charging Circuit Holder (T4056/18650)

This is a mount that I made for a project I was working on. It is not meant to be used as a stand-alone model, but to add to your existing project. It allows you to easily add one of these battery charging modules to your project, and…

Downloads
157
Likes
18
Rating
0
P
Printableskyleireland

Wemos LOLIN D1 mini V4 - TP4056 - BMI160 Holder(s) - SlimeVR or other - Split and Combined

A little helpful file for making cases to hold either; Wemos LOLIN D1 mini V4 TP4056 BMI160 Holds these parts loosely. Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics Option for my first test in…

Downloads
137
Likes
7
Rating
4
P
PrintablesWittiko

TP4056 based charger for 14500 LiIon cells

For my flashlights 14500 battery I needed a charger fitting the protected version of a TP4056 because those I had laying around. So i grabbed the AA charger holder from enif and designed a holder for the charger board in Fusion360,…

Downloads
133
Likes
8
Rating
4.5
P
PrintablesRoyee Studio

18650 USB Charger TP4056 Battery holders 10 slots

18650 USB Charger TP4056 Battery holders 10 slots TP4056 5V 1A TYPEC charger module. others, pls check screenshots

Downloads
127
Likes
21
Rating
0
P
PrintablesNightLonk

Gridfinity: Klein 34056 Hex Ferrule Crimper

Here's a Gridfinity 2x5 holder for the Klein Tools 34056 Hex Ferrule Crimper. I've also included a 2x5 5 bin Gridfinity for either standalone use or for use with the 5x4 Gridfinity Storage Box by Pred (…

Downloads
125
Likes
62
Rating
5
P
PrintablesTellblom

USB TP4056 frame for 1x18650 battery holder

Simple holder for charging 18650 batteries in original battery holder and TP4056. Be careful when pressing down the battery holder so that the cables doesn't get squeezed. The chip I use have the positive pad on the left side, please…

Downloads
120
Likes
22
Rating
5
P
PrintablesvagueDirector

USB Dual 18650 Li-Ion Battery Charger (TP4056)

A compact dual 18650 charger, using cheap modules available on ebay. Modules (Get 2): https://www.ebay.com.au/sch/i.html?_odkw=tp-4056&LH_PrefLoc=2&_sop=15&_armrs=1&LH_BIN=1&_osacat=0&_from=R40&_trksid=m570.l1313&_nkw=tp-4056&_sacat=0…

Downloads
120
Likes
20
Rating
0
P
PrintablesGungriffonbr

meshtastic / meshcore heltec v2 battery case with two 18650 with bms tp4056

meshtastic heltec v2 battery case with two 18650 , back parte compatile with a famous heltec v3 case look like in photos

Downloads
110
Likes
24
Rating
0
P
PrintablesAdam Fuchs

Krabička na modul TP4056 / TP4056 module box

Do krabičky se zacvakne modul a zdířky zašroubují, vrchní krytka se zacvakne. Gcode je udělaný na všechny díly, tedy obsahuje oba dva typy krytu. Kryt bez dírky je pro kompletní uzavření, ten s dírkou je tam proto, aby bylo vidět dovnitř…

Downloads
109
Likes
18
Rating
0
P
PrintablesSlade1972

TP4056 18650 (with protection circuit) Charger

Charge a 18650 battery using the cheap TP4056 circuit boards available on ebay. There are holes in the cradle to allow a cable or paperclip to go through. This gives more stability and stops the paperclip from moving. There are also…

Downloads
106
Likes
12
Rating
0
P
PrintablesNAP

Saab 900 Door Accent washer 4056198

This is a replacement part for Saab 900s. This part is located at the bottom of the door card and helps secure it to the metal door. Outer diameter is 20.5mm with the inner diameter of 8.5 chamfered down to 5mm. The washer itself is 3mm…

Downloads
102
Likes
4
Rating
0
P
PrintablesTimeOut@Home

Sturdy 18650 Holder with TP4056 Charger

This is a sturdy holder for a single 18650 battery and an accompanying TP4056 battery charging/discharging module. The charging module is oriented so that the USB type C port is on the bottom of the mount. I designed this for mounting in…

Downloads
99
Likes
14
Rating
0
P
PrintablesShawn

18650 Battery Charger & Analyzer TP4056 & ZB2L3

Saw this video on Youtube before I got a printer, decided to make a more compact version. https://www.youtube.com/watch?v=bRGt_Fh9CVA&t=588s Wiring design is the same. I bought the TP4056 & ZB2L3 on Amazon, I am not recommending any…

Downloads
97
Likes
38
Rating
0
P
PrintablesTristan Stomp

18650 Charging Board Case USB C TP4056

This is a simple shell I made for a 1A type C charger for 18650 Battery's to hide the exposed circuitry of the board. The TP4056 boards that I designed it for can be cheaply bought on AliExpress.…

Downloads
95
Likes
9
Rating
0
P
PrintablesQel tlhaw DIyuS

18650 Battery Bank Shell with TP4056 Charger 1s2p

The case accommodates two 18650 cells connected in parallel and incorporates a TP4056 module for charging. A JST-XH connector serves as the output interface. Assembly Instructions: Place the 18650 cells into the holder and connect them in…

Downloads
91
Likes
9
Rating
0
P
PrintablesLeigh Williams

TP4056 holder and battery sled

This is a sled for a single 18650 holder and a TP4056. It has holes for M3 knurled inserts with an outer diameter of 4mm and height of 3mm.

Downloads
83
Likes
12
Rating
0
P
PrintablesTritschi

LiIon 18650 Charger with TP4056 Module

Another LiIon Charger case. Biggest problem for me was until now, that good cotact to the LiIon battery was mostly poor. PLA is pretty brittle and not a good material for spring loads. So I decided to create a steel spring load with M4…

Downloads
79
Likes
14
Rating
0
P
PrintablesTimeOut@Home

18650 Battery Box with TP4056 Charger and On/Off Switch

This is a sturdy box with mounts for a single 18650 battery, TP4056 charging module and a micro on/off switch. The parts are designed for nearly support free printing and with layer lines oriented to provide optimal strength and…

Downloads
74
Likes
9
Rating
0
P
PrintablesErwin Hijdra

3* 18650 + 4056 charger + 2596 VR case

A simple case for 3x 18650 Batteries TP4056 charge module and a LM2596s DC-DC Step-Down converter. The top can be fixed with M3 x 8 screws

Downloads
70
Likes
7
Rating
0
P
PrintablesBlomblo

TP4056 Charging Module Holder for Gridfinity

If you, like me, have too many TP4056 charger modules, and want to organize them using Gridfinity. I've got the perfect thing for you! The magnet holes are 6.09mm, so you only need to press them in to the holes. No glue required. I also…

Downloads
70
Likes
9
Rating
5
P
PrintablesBlack Jack

TP4056 Case 3 pin connector at end

Bigger 3 pin connector. Category: Tools

Downloads
68
Likes
5
Rating
0
P
Printablesscenek

TP4056 box

Simple box for TP4056 charging module.

Downloads
64
Likes
5
Rating
0
P
PrintablesGuido3D

TP4056 USB-c box

This model provides a small and effective box for TP4056 charger module. The box is useful, as shown in the images, the box has some space for cables on the back, collected in a single hole, in example when a JST or similar connector is…

Downloads
63
Likes
3
Rating
0
P
PrintablesKadashy

LiPo Charging Module Enclosure for TP4056

This enclosure is optimized to securely and compactly house the TP4056 charging module. The structure includes a stable base and side walls that snugly fit the board’s dimensions, preventing unwanted movement. It features precise cutouts…

Downloads
59
Likes
6
Rating
0
P
Printablesrevoxsvko

ESP32, 128x32 OLED and TP4056 case

Case housing ESP32, 128x32 OLED screen, TP4056 on top of ESP32 and a 1500 mAh Li-Po battery below everything.

Downloads
55
Likes
6
Rating
0
P
PrintablesZiemniaczenka

TP4056 adjustable charger

BOM: Tp4056 type-C charger (for example https://pl.aliexpress.com/item/32930640893.html?) 1x4 2.54 male gold pin connector (remove two outside pins) 18650 batttery spring plate (i found them locally, they need to be 18 mm wide, they are…

Downloads
54
Likes
9
Rating
0
P
PrintablesSzybet

Fully printable Triple 18650 charger using TP4056

The print has some flaws, but i think its still good. Feel free to improve it. Parts are meant to be printed separately I have used this socket for the battery from thingverse: https://www.thingiverse.com/thing:2892321

Downloads
53
Likes
12
Rating
5
P
PrintablesRitwik Aggarwal

18650 Li-ion cell charger / lithium cell charger / tp4056 charger

This is a TP4056 based 20 cell charger which is to be used with a 5V 20A SMPS (for all modules charging at 1A current)

Downloads
49
Likes
7
Rating
0
P
PrintablesShatnoRD

Gameboy Advance SP Type-C TP4056 Charger Battery Cover Mod

This modification of the Gameboy Advance SP battery cover incorporates a Type-C TP4056 charger module, allowing for enhanced functionality. Inspired by Makho's original design (available here ), this mod offers a sleek solution for…

Downloads
47
Likes
16
Rating
0
P
Printableslingeswaran

TP4056 type c 18650 Li-ion BMS module case

Just print and snap the TP4056 type c 18650 Li-ion BMS module on the print. It also have 2 holes to see the charging LEDs.

Downloads
46
Likes
4
Rating
0
P
PrintablesA B

Xbox 360 Wireless Controller battery pack from disposable vape cells and tp4056

Battery pack, that fits two vape cells in parallel + TP4056 module. ADJUST THE CHARGE CURRENT RESISTOR ON TP4056! Should be printed from temperature resistant filament to handle soldering (of the contacts and on the tp4056 board). I used…

Downloads
44
Likes
13
Rating
5
P
PrintablesCrazy Fatty

18650 TP4056 Battery Charger

Description NOW WITH BATTERY REMOVAL RIBBON! I have used and loved enif's battery holder for years, and recently needed to make a bunch of chargers (20+) to give away with flashlight gifts when I ran across MrFlashs' battery charger model…

Downloads
42
Likes
5
Rating
0
P
Printablesedcdadstuff

Battery charger for CRC123A RC123A using TP4056 module

Here is a charger for CRC123A/RC123A batteries, using a TP4056 charging module. I'd printed other models but found them too tight to place/remove the cells, so I designed this, giving more clearance and using springs salvaged from an…

Downloads
42
Likes
14
Rating
0
P
PrintablesBobbyD

Enclosure for TP4056 LM2596 with 18650

This is an enclosure to house a TP4056 USB C module along with a LM2596 buck converter and a spot for an 18650 battery.

Downloads
41
Likes
7
Rating
0
P
PrintablesAlbert Schwarz

TP4056 with usb-c port holder

just holder for TP4056 i printed it with ASA and 0.12 nozzle

Downloads
40
Likes
6
Rating
0
P
PrintablesTBKHomeworld

Ryobi 40v pole saw RY40560 hex key holder

The Allen wrench (hex key) for the 40v Ryobi pole saw, model RY40560 and head unit RY40051, does not have onboard storage. This was designed to clip on the saw head portion and keep the hex key close by the saw chain. Clipping it on is…

Downloads
39
Likes
4
Rating
0
P
PrintablesLeigh Williams

TP4056 and Disposable Vape Battery Charger

This compact model houses a TP4056 charge model with space for a disposable vape battery at the back. Perfect for running LED fairy lights where unregulated output is fine. It can house a round vape battery, about 16mm X 16mm X 38mm.

Downloads
38
Likes
4
Rating
0
P
PrintablesJust Shapes

Charger enclosure for TP4056 and AAA sized Li-Ion Batteries (10440)

Protective enclosure designed to fit two TP4056 modules and two AAA sized battery holders to charge two 10440 batteries in parallel. This enclosure is designed to attach together using the snap fit joints. Printing orientation is…

Downloads
37
Likes
6
Rating
0
P
Printablesheytbe

TP4056 box

TP4056 box

Downloads
37
Likes
5
Rating
0
P
Printablesfirefueled

18650 battery and TP4056 charger case

Route the negative wire via the bottom right corner and through the bottom hole. Solder them into the TP4056 and hot glue.

Downloads
35
Likes
1
Rating
0
P
PrintablesZorro
Downloads
33
Likes
11
Rating
0
P
PrintablesMaFE72

DSO 150 Internal Component Frame to hold in place the MT3608 Voltage Regulator and the TP4056 Battery Charger

This internal frame to hold in place the MT3608 Voltage Regulator and a TP4056 Battery Charger along with a 3.7v 500mAh Lithium Battery inside the DSO150, is designed to fulfill my upgrade needs and I hope is useful to someone else, the…

Downloads
32
Likes
3
Rating
5
P
PrintablesDAPU3D

18650 - 1S1P TP4056

Parts used : (link shopee indonesia) TP4056 + BMS 5V USB TYPE-C 1A HOLDER BATERAI SMD 18650 1x

Downloads
30
Likes
0
Rating
0
P
PrintablesTimeOut@Home

18650 Battery and TP4056 Charger Base - Round

I needed a round electronics bay that includes a single 18650 battery and an accompanying TP4056 charging/discharging unit. I also needed the USB-C charging port to be on the bottom. This build incorporates those features. There is also a…

Downloads
27
Likes
3
Rating
0
P
Printableskuromatiku

TP4056 and Wemos D1 mini esp8266 version for Minecraft Ore Lamp base

This is a remix of the base and LED ring light holder for the Minecraft Ore Lamp https://www.printables.com/model/1460361-minecraft-ore-lamp-wled-esp32-d1-mini-usb-c not tested yet.

Downloads
27
Likes
6
Rating
0
P
Printableshexa spool

tp4056 charging case for 103450 battery

screw both part together with m3 screws loose tolerance

Downloads
26
Likes
10
Rating
4
P
Printablesunhild

Heltec v4 case 18650x2 TP4056

Compact enclosure for the Heltec V4 with two 18650 batteries and a TP4056 charging module. M2.5 screw is required for assembly.

Downloads
25
Likes
6
Rating
5
P

TP4056 mini enclosure

TP4056 Type-C enclosure. For small form factor module, which has no separate MOSFET. Five pin combined IC is named R302b (DW03 IC clone?), v1008. Dimensions: 17.9mm x 14.1mm This type of TP4056 module is reaching 70-80C temperature, when…

Downloads
24
Likes
3
Rating
0
P
PrintablesTyler

Sony NP-BD1 Battery Charger (TP4056 based)

This model is a custom housing designed to secure and enclose a widely available TP4056 Li-ion battery charger module (03962A) for charging a Sony NP-BD1 battery. The design holds the TP4056 module in a fixed position, with a dedicated…

Downloads
22
Likes
4
Rating
0
P
PrintablesSSFD

USB Panel Mount Adapter for TP4056

Please leave a ❤ if this helps you :) Super useful panel mount adapter for adding USB-C port and/or charging to your home projects! There is a cutting guide to place over the thing you want to install it on. Use sharpie to mark the…

Downloads
21
Likes
3
Rating
0
P
PrintablesMikeward1975

Rak19003 holder with TP4056 charging board

This is a small stand I made to mount a RAK 19003 board with a TP4056 Lithium Battery Charging control board into a HarborFreight solar flag pole. Light to use as a Meshtastic Solar Node....There are mounting holes to screw down the RAK…

Downloads
18
Likes
8
Rating
0
P
PrintablesDrMBalmer

TP4056 Project Box with Active Cooling 40mm Fan

A TP4056 PCB Project Box Remix, that adds ventilation and active cooling - supporting a 40mm fan that can be soldered to the TP4056 for power. Using a translucent fan will also allow you to better see the charge status LEDs of the TP4056.…

Downloads
17
Likes
3
Rating
0
P
Printablesxsytes

slimeVR Frozen slimes v1 custom case - for D1 mini+tp4056+BMI160 manual soldering

This is a customized frozen slimes v1 case for slimeVR FBT trackers, for use with WEMOS D1 mini, TP4056 and BMI160 The original is designed to fit a custom PCB for connecting everything Since I don't have access to PCB manufacturing…

Downloads
16
Likes
2
Rating
0
P
PrintablesDrDiesel

Dual 18650 Charger for HW-373 TP4056 USB-C module

Quick and ugly remix of @_KaszpiR_ 's quick and ugly remix to use one HW-373 module to charge two cells simultaneously. Please use your own wisdom and judgement when wiring the cell holders. Parallel wiring recommended!

Downloads
14
Likes
1
Rating
0

Bluetooth DAC using mh-m28 TP4056 and 18650 battery

Bluetooth DAC for headphones or retrofit old stereo . Step file available.

Downloads
12
Likes
0
Rating
0

Compact 18650 & 16340 Battery Charger Module for TP4056

Compact 18650 & 16340 Battery Charger Module for TP4056 Model Description A compact, reliable, and easy-to-print 3D-printed battery holder and charging dock designed specifically for 18650 and 16340 Li-Ion batteries using the popular…

Downloads
12
Likes
4
Rating
0
P
PrintablesAnas Msba

Protective Case for TP4056 JST Plug

this was an idea never finish it maybe it will help someone

Downloads
11
Likes
1
Rating
0
P
PrintablesDevEclipse1

TP4056 Charing dock

This is a "smart" charger for the TP4056 type C modules, it has holes for a MX2.0 connector, JST PH2.0, and classic 2.54mm headers, you are gonna have to hotglue the connectors in the appropriate holes for it to hold properly, you also…

Downloads
9
Likes
1
Rating
0
P
PrintablesMacieyevsky

4056 double 18650 Li-Ion cell charger

This device is used to organize your electronics. You can glue the 4056 module, solder wires and bolt down cell holders. You can also print the feet if you want to protect your table from scratches. Please do not re-upload STL or any…

Downloads
9
Likes
1
Rating
0
P
PrintablesMasakari

Rear Bike Light (18650 + charger TP4056)

2 x bright red LED 5 mm (connected in series) 1 x 18650 3 x M3 heat inserts 3 x M3x8 1 x Toggle Switch 1 x TP4056 Lithium Battery Charger Module Filament: Clear PTEG

Downloads
8
Likes
1
Rating
0
P
PrintablesLegacy_Micro

BASIC - TP4056 Lithium Cell Charger Housing

TOOLS NEEDED: ------------------------ 1 X 3d Printer 1 X Soldering Iron 1 X Phillips Screwdriver MATERIALS NEEDED: ------------------------ 1 X PCB Mount 18650 Battery Holder with Pins 2 X M2.5x6mm Flat Head Phillips Screws 2 X M2.5x7mm…

Downloads
7
Likes
0
Rating
0
P
Printablessamilbb

bosch glm50 laser cover with 18650 tp4056 v3

bosch glm50 laser cover with 18650 tp4056 v3 bosch glm50 laser cover

Downloads
7
Likes
0
Rating
0
P
Printableselimile

Bicycle front light with 18650 battery and TP4056 charger

Bicycle front light with 18650 battery and TP4056 charger. Printed from PETG, additional parts Power LED Star 3W and reflector…

Downloads
6
Likes
0
Rating
0
P
PrintablesHarjeeth4444

TP4056 Charging Dock

A simple charging dock. There is space at the back for a USB-C female plug, and the output of the PCB goes to 2 Jumper Wires. There is an integrated draw to fit the battery you are charging in. The Clear lid should be printed in white to…

Downloads
6
Likes
0
Rating
0
P
Printableshep3

DIY headlamp 18650 conversion with tp4056 charging module

Stuff needed: tp4056 charging module (USB TYPE-C) 18650 battery wire PVC heat shrink (43mm and 85mm) (I suppose slightly bigger sizes will be fine too.) Heatgun or hairdryer Rubber bands (to attach cell to holder) Clear tape Possibly a…

Downloads
3
Likes
4
Rating
0
P
PrintablesHossam Elramy

TP4056 5v charger case with a snap on lid to 3.7v battery

TP4056 C ase 5v charger case with a snap on lid to 3.7v battery you can also use double sided tape on the bottom of the board.

Downloads
3
Likes
0
Rating
0
P
Printablesgo

Doorbell ESP32 + TP4056 + mxswitch + 18650

Doorbell I use with Home-Assistant. Houses: ESP32-c6-supermini board (e.g. from aliexpress) TP4056 based battery protection/charging board 18650 battery with battery holder Cherry MX-style switch as a button 5kOhm resistor for connecting…

Downloads
2
Likes
0
Rating
0
P
PrintablesFojers

Li‑ion Power Core for Bluetooth Device (TP4056 + MT3608)

--- This is a compact 3D-printed enclosure designed to house the internal power supply and audio components for a DIY Bluetooth device — such as a portable speaker. The case integrates a Li‑ion battery with a TP4056 charging module, an…

Downloads
0
Likes
0
Rating
0
P
PrintablesPoesia3D

CAJA + PASAMUROS FIJACION PARA MODULO TP4056

AHORA TENEMOS 2 VERSIONES: V0 - Sin labio pasamuros V2 - Con labio pasamuros 2 mm Se trata de una pieza para tratar de resolver uno de los problemas que me encuentro (y seguro que, como yo, muchos diseñadores de piezas 3D con Electronica)…

Downloads
0
Likes
1
Rating
0
P
PrintablesNicolas O.S.

Holding bracket for TC4056 charge controller (usbc upgraded ver.) for Magnetic stirrer

A small bracket that holds the TC4056 in place so it cannot be pushed back or moved around. Screws dont line up but it fits in place tightly. I printed it in PETG and PC filament.

Downloads
0
Likes
0
Rating
0
P
PrintablesJessMarie

TP4056 18650 Holder Charger for off-the-shelf battery tray

I had some of these 18650 batter holders laying around doing nothing, so here's my remix of zeroeffect's battery holder for charging with a TP4056. https://www.amazon.com/LBTODH-Battery-Holder-Storage-Plastic/dp/B092TGQ7PB Printed with…

Downloads
0
Likes
1
Rating
0
P
Printables

Lithium Battery Charger Li-ion Module TP4056 USB C mock up

This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…

P
Printables

18650 Battery Bank Shell with TP4056 Charger 1s2p

The case accommodates two 18650 cells connected in parallel and incorporates a TP4056 module for charging. A JST-XH connector serves as the output interface. Assembly Instructions: Place the 18650 cells into the holder and connect them in…