Search results: 42mm

Sort order

213 models

P
Printablesgskollnau

Bonsai pot 33 rectangular curved inward 162x122x42mm

Bonsai pot 33 rectangular curved inward 162x122x42mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…

Print approx. €0.54–€0.67 excl. taxPreliminary estimate for one variant

Downloads
119
Likes
26
Rating
0
P
Printablestsbrownie

Scalable Lens Hood for Panasonic Lumix with 14-42mm f3.5-f5.6 Lens

Lens Hood for Panasonic Lumix with 14-42mm f3.5-f5.6 Lens This lens hood fits Panasonic / Olympus 4/3rds lenses with bayonet hood mount. To put the lens hood on, squeeze the hood opposite the ears. The lens hood stays in place because of…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
4
Rating
0
P
PrintablesBooks

Gridfinity 42mm Hinge-Top Box

A 1x1 Gridfinity box with hinges. Gridfinity is an organization system designed by Zack Freedman, inspired by a similar system by Alexandre Chappel. It uses 3d-printed grid baseplates of 42mm squares to nicely arrange a large and growing…

Downloads
769
Likes
270
Rating
3
P
PrintablesTripod Tech

Gridfinity 35x42mm Ruler Holder Organizer

I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…

Downloads
689
Likes
98
Rating
4.2
P
PrintablesPurduesi

Precision Bit Holder and 3D Printer Tool Caddy - 3x3 Gridfinity 42mm

Fits all the bits from this electric precision screwdriver kit . In addition it has storage on the side to hold all the various tools I use for 3D printing. I included the step file and f3d file if anyone wishes to remix/modify. From the…

Downloads
587
Likes
71
Rating
5
P
PrintablesMike

42mm Female to 28mm Male Bottle Adapter

The is a two piece adapter that allows you to attach a bag or container with a 42mm male thread like a Befree or Hydro_pack to a water filter with a 28mm female thread like is used with the Sawyer Squeeze water filter. Both parts can be…

Downloads
499
Likes
29
Rating
5
P
Printables3Diocrity

38mm 1.5in or 42mm Roll bar GoPro Clamp

This fits around a 38mm or 1.5in roll cage or roll bar tube and holds a standard GoPro mount. It is designed .25mm small to allow for clamping force and has space for M4 hardware to fasten it. The standard GoPro mounting hardware will…

Downloads
498
Likes
48
Rating
5
P
PrintablesB0rax

Shower & Tub Drain Hair Catcher Trap 42mm

I liked varinds design quite a lot, but my drain had a bigger diameter, around 42-43mm. So I adapted the Part, thanks to the included f3d file. I also made it not as tall, because my drain is shorter. It works really well, printed in TPU.

Downloads
458
Likes
34
Rating
5
P
PrintablesMrViddy

Scope Throw Lever 42mm

Made out of PETG for Flexibility and Heat Resistant Hardware: 1x M3 20mm cap head screw 1x M3 nylock nut 42mm Zoom ring:

Downloads
398
Likes
57
Rating
5
P
PrintablesSPRKPLG

Big Viewfinder Custom Housings for 28mm 38mm 42mm 60mm focal lengths

Print settings are up to you, there are no special settings needed. They are designed to not require supports if you print with the long part of the body facing up. Print on a textured bed as that surface will be the front of the VF. Each…

Downloads
367
Likes
58
Rating
5
P
PrintablesScale_RC_German

HSW pliers 37mm/42mm holder

i have adapted the holders for 37mm and 42mm pliers. In addition, I removed a little material from the underside so that the print bed adhesion is better

Downloads
361
Likes
45
Rating
5
P
PrintablesChewbugga

Throw Lever (quick zoom change) for Ø42mm ring diameter

Always wanted a throw lever to quickly change the zoom level on my Vortex Crossfire 3-9x40 scope, so I made one. Actually two, one with a straight lever and one with an angled one to interfere less with the bolt handle (see images). My…

Downloads
358
Likes
48
Rating
5
P
PrintablesRipped

Socket Strip Holder | Halter 3-Fach Steckdose 52mm x 42mm

If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 52mm…

Downloads
318
Likes
30
Rating
5
P
Printablesadamnant

Werewolf 32mm/42mm (DND / TTRPG)

Update Apr 26, 2025: Added a 42mm tall version (still on a 25mm baseplate) since the main one seemed small next to my other werewolves Added variant using my new hands collection - more better claws, I've included this in both 32mm and…

Downloads
301
Likes
52
Rating
0
P
PrintablesTrebian

Quick release plate / Schnellwechselplatte (42x42mm) für Cullmann Stative

gedruckt aus PLA, 1,2mm Wandstärke, 17% Füllung, Muster: Dreiecke (mit zwei Linien) Eine separate Schraube zur Befestigung der Kameras wird benötigt evtl. muss der Bügel von einigen Schrauben entfernt werden Ich habe oben (beim Druck…

Downloads
278
Likes
15
Rating
5
P
PrintablesBjørk

Watch stand with cut-out for wireless charger (Samsung Galaxy Watch 4 42mm)

It works fine and does as intended. Use your favorite print settings. A bit of support seems necessary. (I'm not too picky about the finish, so I used my Ender 3 with PLA through a 0.4mm nozzle at: Layer height 0.3 Extrusion width 0.6…

Downloads
269
Likes
28
Rating
5

30mm/42mm scope caps w/t throw lever

This is a remix that works just like the One Hundred Concepts scope caps but is tailored to 30mm scopes with ~42mm ocular lens. I suggest matte filament or a matte paint job to reduce reflectively and the "glisten" of layer lines. Use 2mm…

Downloads
247
Likes
25
Rating
0
P
PrintablesBasementLAB

Fairing Threaded Standoffs / Spacer - Transalp 650 M10 Thread Mod. 14-42mm - Boccola Perno Carena Transalp 650 Mod. 14-42mm Filetto M10

Fairing Threaded Standoffs / Spacer - Transalp 650 M10 Thread Mod. 14-42mm - Boccola Perno Carena Transalp 650 Mod. 14-42mm Filetto M10 M10x14mm M10x42mm Suitable for:…

Downloads
245
Likes
7
Rating
5
P
Printablesarchimedes2002

Scope cover (42mm inner diameter)

Simple scope cover. It holds with friction, but you can add a torsion spring to make it even more tacti-cool. When closed, it is held by a small latch. It is made for a rifle scope with an outer diameter of the tube end of 42 mm. I also…

Downloads
208
Likes
33
Rating
5
P
PrintablesMazori

Withings Scanwatch (42mm) Charging Stand

The charging stand is tested with the 42mm version, but it should work with the 38mm as well. It requires supports when printing. Leave a like if you like the charging stand! Print settings: supports required

Downloads
201
Likes
25
Rating
4.67
P
PrintablesTripod Tech

Gridfinity 35x42mm Storage Bin Organizers

I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…

Downloads
197
Likes
21
Rating
5
P
PrintablesMicah

Gridfinity - 42mm Stepper Motor Holder 7 sizes + Parameteric Fusion File

Gridfinity - 42mm Stepper Motor Holder Included are 7 sizes 1 - 7 steppers. Fusion365 Fusion 360 File included for easy remixing Parameteric file, to change the number of steppers choose 'modify parameters' and the parameter name is:…

Downloads
191
Likes
32
Rating
4.75
P
Printables3Diocrity

38mm 1.5" or 42mm Roll Cage Clamp for race harnesses

Most race sanctioning bodies require clamps on the roll bar to keep the harness from sliding around. This fits around a 38mm or 1.5in roll cage tube to keep the belts in place. It is designed .25mm small to allow for clamping force and…

Downloads
186
Likes
16
Rating
5
P
PrintablesAzulito

IPHONE XS AND APPLE WATCH 42MM STAND

stand for IPHONE X/XS AND for APPLE WATCH 42MM Print instructions 4 top layers 5 bottom Layers 3 shells 20% infill

Downloads
180
Likes
11
Rating
4.5
P
PrintablesMaesgd

Bicycle chainholder for cleaning (12mm x 142mm through axle) _ NO SUPPORT

Printable without support Two piece design Made for roadbike with 142mm rear axle 12mm diameter Rotates with chain Works in every gear

Downloads
165
Likes
57
Rating
0
P
PrintablesBoBaCool

Apple iWatch 42mm charging dock - Classic Mac

This very old model can still be used to charge your 42mm Apple Watch. It was printed successfully using some supports in PETG. The original model has been designed by option8 on Thingiverse. All details are available here :…

Downloads
162
Likes
21
Rating
0
P
PrintablesBluente

Gridfinity 42mm/120ml vape bottle

Just a simple subtraction to fit a 120ml bottle of vaping liquid. It is a tight fit, so expect it to come off with the bottle, but don't worry, it won't fall ;)

Downloads
157
Likes
21
Rating
5
P

Hydrapak 42mm to 28mm sawyer squeeze adapter

It fits the sawyer squeeze to the hydrapak ultraflask (speed 600ml) threads. printed without supports, adhesion, and no cleanup. hydrapak threads: pitch 3.4 mm

Downloads
155
Likes
9
Rating
0
P
PrintablesMUCCreator

Starlink Mini antenna base to PVC pipe adapter (42mm OD)

Prints on Prusa Mini in PETG. Adapts the pretty huge, odd-shaped hole in the Starlink Mini antenna base to a ring accepting PVC pipe with 42mm outer diameter. Did not take a picture of an acutal print - this model is the adapter between…

Downloads
153
Likes
11
Rating
0
P
PrintablesJoker

Fossil Watch ø42mm Backplate Remover Tool

This tool helps you open up your watch if you want to do some cleaning or other maintenance like I had to do. I needed it to fix my automatic winding mechanism in my watch (Fossil ME3181) but did not have the tools available, so after a…

Downloads
149
Likes
12
Rating
4
P
PrintablesUKDeek

Klickfast Belt Dock - 42mm

The Klickfast Belt Dock by @ItsGhost is an excellent model, but unfortunately the sizes aren't right for the current UK Ambulance Service issue nylon webbing belt. The belt is 40mm deep, so the 38mm variant is slightly too small, and the…

Downloads
136
Likes
10
Rating
0
P
PrintablesJingerale

BentoBox ILIFE (Amazon) V3 V5 hepa filter container approx. 42mmx83mm

I bought the HEPA filter linked in the original BentoBox filter comment section from Amazon. about 42mm x 83mm. Remixed the filter container to fit it exactly. also reduced over all height. works with the original cover. I have not…

Downloads
134
Likes
21
Rating
0

Korsar moder 6.35 42mm rezik 240mm stvol

17% заполнение гироидом. Поддержки да

Downloads
130
Likes
7
Rating
0
P
PrintablesPariDot

Star link Gen 3 42mm Pole Mount

Modified the original mount to fit 42mm poles. Compatible with Star link Gen 3 Satellite Receiver

Downloads
114
Likes
7
Rating
5
P
PrintablesKarst

Milwaukee M18 42mm battery extension

42mm extension for two 5.0Ah batery, only remove the PCB and the holder for it and solding the pack together.

Downloads
113
Likes
38
Rating
0
P
PrintablesBoBaCool

Apple Watch charging dock - Improved version for 42mm

This old Macintosh ('80) has been designed to hold and charge the 42mm Apple Watch. I modified this model to make the front frame more resistant. Therefore, I added 2mm thickness to both side walls. The original model has been designed by…

Downloads
110
Likes
17
Rating
0
P
PrintablesGuax

42mm lenscap (fits Jupiter 8)

External lenscap for 42mm bore lenses (or whatever thats that size). Made to snugly fit a Zenit Jupiter 8 LTM Inner bore is 41.98mm and will perfectly fit the lens if your printer is calibrated. Be aware you might have to re-print with %…

Downloads
107
Likes
5
Rating
5
P
Printablesgege

Gridfinity Base Plates Pack 1x1 to 10x10 – Standard 42mm Modular System

📦 Complete Gridfinity Base Plate Pack This pack includes a full set of Gridfinity base plates from 1x1 to 1x10 , designed according to the official 42mm unit standard . Perfect for: drawer organization workshop setups storage optimization…

Downloads
105
Likes
16
Rating
5
P
PrintablesCarlos Bogas

42MM Toolboard holder for LGX Lite

This is a holder for a BTT EBB42 or any other 42mm Toolboard, that secures on the side of the LGX Lite

Downloads
96
Likes
9
Rating
0
P
PrintablesDoubleC

Dual 40mm Fan Mount for 40 to 42mm Motor

Remix of the single fan mount of the Kraton collection. Made it hold two 40mm fans. I use it in my Arrma Kraton EXB in a 4092 Rocket motor. Printed in PETG with support. Fixed with straps. Print Settings Printer Brand: Creality Printer:…

Downloads
95
Likes
8
Rating
0
P
Printablesboyestrous

42mm Potentiometer Knob

Potentiometer knob for a knurled (press fit) knob with a 6mm ID and 42mm OD.

Downloads
93
Likes
5
Rating
0
P
PrintablesIper82

Spool adapter for SUNLU 250g with diameter 42mm

Adapter for 250g SUNLU spools with an inner diameter of 42mm. Considered 15% infill but with 3 walls to make it rigid. The two pins have the anti-rotational function, locking the two pieces with the pins in the side holes of the spools…

Downloads
92
Likes
3
Rating
5
P
PrintablesSmok7kp

3 x 75mm x 42mm movement tray for 9th age/warhammer fantasy battle/age of sigmar/40k unit of three models with 75mmx42mm base

Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.

Downloads
92
Likes
12
Rating
0
P
PrintablesMarc Proszamer

Hair-dryer nozzle 42mm

I want to blow through my PC from time to time, but I didn't want to buy compressed air or a special blower. So I've designed this nozzle for our hairdryer which has a button for cold air also - ideal blow the dust out of my computer and…

Downloads
86
Likes
12
Rating
0
P
PrintablesMaksym Kozlenko

Olympus M.Zuiko 14-42mm EZ lens case

Olympus M.Zuiko 14-42mm EZ lens case. Internal size: * diameter 62.5mm * height: 32mm I've printed it using Sunlu PLA+ filament using a 0.4mm nozzle. Would recommend to print using the 0.08mm Extra Fine setting so thread is smooth

Downloads
82
Likes
10
Rating
0
P
PrintablesNirvash

Ender 3 feet for 42mm rubber or foam balls

So K0ECW remixed this model to make it fit better with the rails, but the rails and the body were detached. No worries, here's a fixed model. PRINT WITH SUPPORTS! I used tree supports because they are very easy to remove. Pair them with…

Downloads
81
Likes
27
Rating
5
P
Printablescmh

Pegboard holder for DualCo grease guns (42mm ID)

Holder for a DualCo grease gun on 1x1/4" MDF pegboard. Should work with other 1" pegboards, but might not fit as well. The grease gun on the right has a Luer Lock adapter with the fantastic grease brush from Radar Laboratories - I highly…

Downloads
79
Likes
27
Rating
0
P
Printables3D Project

Christmas Star Tealight Holder led hole 42mm

⭐ Christmas Star Tealight Holder – 3D Print 🎄✨ Create a warm and magical holiday atmosphere with this star-shaped Christmas tealight holder ! ⭐🕯 The model features a charming winter village scene complete with houses, trees, a church ⛪,…

Downloads
77
Likes
18
Rating
0
P
PrintablesMilan

Skadis Spray Bottle Mount (⌀ 42mm)

I use it to store my Isopropyl alcohol spray bottle. The inner diameter is 42mm and the depth is 25mm. It fits the 40mm Bottle well. Once again I used Johannes container frame as a base for the hooks and accordingly chose CC BY-NC 4.0 as…

Downloads
77
Likes
8
Rating
5
P
PrintablesKamil Kaleta

M.ZUIKO OLYMPUS LENS CASE 45MM & 12-42MM

This is the version without the embossing visible in the photos. More versions are available to my patrons .

Downloads
77
Likes
11
Rating
5
P
PrintablesAngelking_1987

Adapter Bestway / Intex 42mm auf 32mm

Durch diesen Adapter kann der Saugschlauch für den Poolsauger direkt an der Ansaugöffnung innen am Pool angesteckt werden.

Downloads
71
Likes
9
Rating
0

E27 Lamp shade for 42mm lampholder

Lampshade with 42mm hole to mount on standard (At least in closest shop =) lamp holders. Slightly squared to the bottom (Or top if looking at how it is printed) Use STEP file, STL included only for preview. Print in Vase Mode, 5 bottom…

Downloads
70
Likes
9
Rating
0
P
Printablesgskollnau

Bonsai pot 06 round (mame) 120x120x42mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here. Update 01: new photos (you can't see…

Downloads
69
Likes
12
Rating
5
P
PrintablesSuNSHiNe

40-42mm Hakenschlüssel PE Rohr PE Kugelhahn

Die Überwurfmuttern eines PE Kugelhahns mit 1" Gewinde hat ein Innenleben das man beim Festziehen mit Zange schnell beschädigt. Der Hakenschlüssel ist dafür passend. Ganz sicher auch für andere Anwendungen an PE Rohren geeignet.

Downloads
69
Likes
3
Rating
0
P
PrintablesTripod Tech

35x42mm Gridfinity Frame Baseplate

I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…

Downloads
68
Likes
7
Rating
0
P
PrintablesJoe Malovich

42mm Genderless Base-gridless Connectorless Interlocking Scalable Stackable Concept Organization Bins with some Gridfinity Compatibility

I figured somebody would eventually design this, why not me? Roughly based on a standard Gridfinity 1x1x6u bin. No base-grid required.…

Downloads
68
Likes
18
Rating
5
P
PrintablesLoLiMSE

Kinda Katana 142mm high

This is made for people who dont have printers that can print bigger than 15mm but still want an cool and sleek sword. Im not sure this will work but you can give it a try its the same model just with another blade guard and with an…

Downloads
66
Likes
3
Rating
0
P
PrintablesGuyH

Multiboard Super Glue Holder - 42mm bottle

I've designed a simple holder for the superglue I use. This is a 40mm bottle but the holder has 42mm internal diameter. Simple push fit for the Multiboard system.

Downloads
64
Likes
7
Rating
5
P
Printablesjustdanok

Hair Catcher for 42mm Shower Drains

Fits 42mm drains. TPU recommended for a squeeze-fit. Category: Bathroom

Downloads
64
Likes
4
Rating
0
P
Printablesekainz

HSW 42mm Cooking Sprayer Holder [Honeycomb Storage Wall]

Mounts with a M3x12 screw to “Insert-with-M3-dual.stl” from the HSW repository (linked below under "Model origin". CAD:…

Downloads
63
Likes
14
Rating
0

Lamp shade for 42mm E27 holder

Description: Simple but elegant lampshade, for best results - paint white on the inside, or print with white filament and paint desired color on the outside. Instructions: Use fuzzy skin 0.25 length, 0.1 thickness. Tested on Bambu Lab…

Downloads
62
Likes
16
Rating
0
P
PrintablesNathan_Drone

Seamless geared follow focus ring for Panasonic 14-42mm

Seamless geared follow focus ring for Panasonic MFT 14-42mm F/3.5-5.6 lens. The focus ring was made to work with DJI Ronin SC pro combo follow focus motor. The fit is a bit too tight so the ring needs to be sanded down to fit on the lens.

Downloads
62
Likes
4
Rating
0
P
Printablesdrhollen

Solar filter for binoculars (with 42mm objective lenses)

Solar filter for binoculars with 42mm objective lenses. These work both on my Nikon Monarch HG 10x42 and Nikon Monarch 7 10x42 binoculars and will probably fit other similar sized binoculars. This solar filter fits nicely on the end of…

Downloads
61
Likes
6
Rating
0
P
PrintablesCesar Pacheco

Hygrometer Mount 42mm 3x (8x3) Magnets

No supports required. Infill >20% for stability Recomended in PETG The magnets should press fit in Hygrometer : https://www.amazon.es/dp/B088NN6WY6 Magnets : https://www.amazon.es/dp/B074C79DJS

Downloads
58
Likes
3
Rating
3
P
PrintablesOeschMe

Desk stand for 42mm temp / humidity gauge

Simple sstand for 42mm temp / humidity gauge. Made for these (Type D) china eBay gauges, but should work with any 42mm gauge. Stand is angled a bit for best viewing angle. Print hole down. Mine is printed with 0.6n 0.3mm using PrusaSlicer…

Downloads
57
Likes
9
Rating
5
P
Printablesort

Pegboard small bottle (<⌀42mm) holder

A pegboard holder for small bottle or cylindrical object, < ⌀ 42mm diameter. I'm using them for 3D bed fixing solution, like Dimafix Stick. Fit a pegboard with 4mm hole, 25.4mm/1inch holes distance, 3mm tickness. STEP file included. Print…

Downloads
56
Likes
6
Rating
0
P
Printableszyklone 666

Soporte para canaleta de cables de 42mm

Soporte para canaleta de cables de 42mm

Downloads
54
Likes
7
Rating
0
P
PrintablesAlessioCasco

Wahoo Kickr Snap 12x142mm Thru Axle Adaptor for Orbea

Hello This is the adaptor that enables you to use almost every Orbea road bike that uses a 12x142mm thru-axle on a Wahoo Kickr Snap trainer . The design is taken from the original Wahoo Kickr Snap 12x142mm Thru Axle fine Adaptor , with…

Downloads
53
Likes
2
Rating
0
P
PrintablesElsni

Holder for round spice containers (42mm diameter)

This model holds three 42mm diameter spice containers. They fit tightly and don't rattle around. The holder is designed to be hot glued to the inside of a kitchen cupboard door. Print with PETG 45% cubic infill. PLA may work as well, but…

Downloads
51
Likes
4
Rating
0
P
PrintablesFrostyEldin

42mm Scope Throw

This is a basic scope throw like many others. It uses a M3x20 bolt and a corresponding nut. Make sure to put it somewhere to not hit your bolt when zoomed in or out! Feel free to sell them or whatever else you wanna do with them. I made…

Downloads
51
Likes
12
Rating
0
P
PrintablesHeleplanchiste

Charging Stand - Withings Scan Watch 42mm

I printed this plan and realised it didn't fit my Withings scan watch, so I took the inspiration from the plan and designed my own stand. Made this plan , but it had some flaw so I create a new one which work perfectly! Its made of two…

Downloads
50
Likes
7
Rating
0
P
Printablesgskollnau

Bonsai pot 07 rectangular (mame) 120x85x42mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here. Update 01: new photos (you can't see…

Downloads
50
Likes
12
Rating
0
P
PrintablesMuchsi

ATS Classic for RC 1:10 (42mm Diameter)

Variant with 42mm diameter. For example for Tamiya Opel Kadett C Coupe

Downloads
49
Likes
8
Rating
0
P
PrintablesBrandon Eley

A5 Narrow Planner Divider Tabs for paper 142mm x 210mm

I originally bought some A5 planner dividers on Amz but they curled up over time which drove me crazy. Designed and printed these thin planner dividers and it took a few tries, originally they were too thick and were too rigid, but think…

Downloads
49
Likes
14
Rating
0
P
Printablespr3mium.cola

Wäschespinne Schieber // "Rotary dryer slider" // (d = 42mm) (Tube b = 20mm) (replacement)

Print settings: PETG Screw with 60% infill und 5 Perimeter and no Bot Layers hi zusammen, die Wäschespinne steht hier schon ewig, leider sind die Kunsststoffteile von der UV-Strahlung sehr brüchig geworden. Das Schiebbare Element ist…

Downloads
49
Likes
7
Rating
0
P
Printablessa3aad

Velbon Quick Release Platform 42mm

Velbon Quick Release Platform 42mm Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.20 Infill: 100% Filament: Polymaker Polyflex PLA Black Notes: Velbon Quick Release Platform 42mm Category:…

Downloads
49
Likes
5
Rating
0
P
Printablesgskollnau

Bonsai pot 08 oval (mame) 120x85x42mm

No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here. Update 01: new photos (you can't see…

Downloads
48
Likes
12
Rating
0
P
PrintablesNathan Allen

Genmitsu ( Sainsmart ) 10w 42mm laser mount for 52mm spindle V2

This is an update to the original model. The first model had issues with flexing and bending. It also didn't clear the top and bottom flange of the Z-Axis. This model has added support to prevent flexing and has been trimmed to avoid…

Downloads
48
Likes
7
Rating
0
P
Printablesjattie
Downloads
47
Likes
9
Rating
0
P
Printablesbuffhunter

Bottle drainer for trueFruits bottle (42mm inner diameter)

This is a Remix of this Bottle drainer by Ataris : https://www.printables.com/de/model/397663-bottle-drainer Two pieces, just assemble togeher. No gluing. Basicly I remodeld the Bottle drainer to hold a trueFruits Bottle or probably any…

Downloads
46
Likes
6
Rating
4.33
P
PrintablesAndrea Pizzolo

ronclad Oathbreaker – Divine Cleric 42mm STL D&D Miniature

Description: Forged in faith and armored in pure resolve, the Ironclad Oathbreaker is a powerful divine cleric designed to bring an imposing presence to any tabletop RPG or miniature collection. With heavy, ornate plate armor, a massive…

Downloads
45
Likes
6
Rating
0
P
Printablesjoegoodsell

Coffee Hand Grinder Funnel (42mm diameter - designed for 1ZPresso Q series)

Designed for my 1ZPresso Q2S but may work on other grinders. The tip of the funnel is approx. 42mm external diameter so if your grinder is larger you might be in luck. Height from narrowest point of cone to tip of funnel externally is…

Downloads
44
Likes
6
Rating
0
P
Printablestecno

Bicycle dummyhub for 12x142mm thru axle

Dummyhub for 12x142mm thru axle. Category: Sport & Outdoors

Downloads
43
Likes
5
Rating
0
P
PrintablesArno Gradwohl

Nikon Prostaff P3 42mm Protective Cap

Front protective caps for the Nikon Prostaff P3 (42mm) binoculars. Added a hole to attach them with a short piece of string. Resize stl to 101 - 102% when printing with PETG (gcode-file already adapted). Print 2 pieces (gcode-file prints…

Downloads
43
Likes
3
Rating
0
P

Pool floater holder for 42mm

Remixed the hook for 42mm tubes Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 25 Filament: any PETG ABS any Category: Outdoor & Garden

Downloads
42
Likes
5
Rating
0
P
PrintablesSan G Dice

D20 Ice Cube Holder (42mm ice cube, can be resized)

I've been working on this for a while now. This is version 4. I did a test print of version 3 (the files you see) and just needed to add one small thing to it to get the connection between the halves ready, so I did that, and I'll do…

Downloads
37
Likes
1
Rating
5
P
PrintablesCartridge_Man
18+

The source marked this model as adult content.

Downloads
37
Likes
8
Rating
5
P
Printablescreadaptive

BathTub and BathSink Filters Parametric d36mm, d42mm

Using flexible TPU filament and choosing appropriate sizes during customization it fits well and pretty easy to handle and clean. After several attempts with rigid PLA it is a charm in our bathroom. The hexagonal pieces allow a quicker…

Downloads
37
Likes
1
Rating
0
P
PrintablesFlyboyron

Samsung Watch 4 Classic 42mm Charging Dock

Charging Dock/Stand for Samsung Watch 4 Classic. Made in 2 pieces for easier printing without supports. Just glue the two keyed parts together. Printing it as one part required substantial support and a lot more time/filament. Uses…

Downloads
37
Likes
3
Rating
0
P
PrintablesJohn Aselton

Zulu 5 (10x42mm) Binocular ARD Killflash Cap and Collar System

Sig Sauer Zulu 5 (10x42mm) Binocular: Anti Reflection Device (ARD) aka Killflash, Binocular Cap and Shock Collar System

Downloads
36
Likes
7
Rating
0
P
Printablesfigterk

42mm Cubicle Wall Coat Hanger.

Cubicle coat hanger for 42mm wide cubicle wall.

Downloads
36
Likes
2
Rating
0

Retro karting fuel tank cap 42mm

Retro karting fuel tank cap 42mm

Downloads
36
Likes
3
Rating
0
P
Printablesme4wsu

Dewalt Miter Saw Vacuum Adapter (1.5 in. to 2 in.; 42mm to 58.5mm)

A vacuum adapter for my miter saw so that the vacuum can collect the wood dust effectively (without a bunch of duct tape). Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: No Resolution: 0.2 Infill: 100%…

Downloads
36
Likes
7
Rating
2
P
PrintablesmoWerk

W639 - 42mm plug - A1009870044 [Scheibe] - Vito / Viano Mercedes Benz

Replacement for the usually gooey or brittle 42mm plug used to seal 42mm holes in the wiper compartment of W639 Viano and Vito. Might fit other Mercedes Benz models BEWARE, this is made to print in TPU/Flex. Using any other non flexible…

Downloads
34
Likes
7
Rating
0
P
PrintablesBasementLAB

Fairing Pin Reinforcement Collar Honda Transalp 650 - Collarino di rinforzo colonnina perno 42mm Transalp 650

Fairing Pin Reinforcement Collar Honda Transalp 650 - Collarino di rinforzo colonnina perno Carena Misura 42mm Transalp 650 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx

Downloads
34
Likes
1
Rating
0
P
PrintablesPaciu

fence post plug 42mm

Post stopper with 42mm inner diameter There are two versions to choose from: long and short I printed with ASA filament nozzle 0.4 stroke 0.2 printing time 3.5 hours with supports without filling 0% Number of walls 4

Downloads
33
Likes
5
Rating
5
P
PrintablesPanicCarefully

adjustable ball joint (approx. base 50x42mm)

This is a base model of a screw adjustable ball joint - designed for a in-car telephone mount. It uses a M5x8 brass thread insert and a M5x12 screw. The rectangular size is approx. 50mmx42mm, the total height 23mm. The fixation holes (4…

Downloads
32
Likes
4
Rating
0
P
PrintablesDJMaan

Another Starlink Pole Adapter - Ø42mm

An enlarged version of the original

Downloads
32
Likes
3
Rating
0
P
PrintablesOwlis

Charging stand for Smartwatch Huawei GT3 42mm

PETG - printed with organic supports

Downloads
31
Likes
2
Rating
0
P
PrintablesFloatingBoater

Parameterised fittings for a 42mm steel pole mast - top cap, bottom cap, shim for bolting to a flat surface

These parts were designed for a 42mm steel pole used as a combined CCTV and Wi-Fi mast bolted to the side of a building. Any pole size can be set using OpenSCAD - just change the variables at the top. The fittings are parameterised…

Downloads
31
Likes
8
Rating
0