Search results: 4c

Sort order

Counting matching models…

P
PrintablesAdam Kimmerly

KM4CFT CFT1 Transceiver Case - V1, Half Upgrade, and V2

Compatible with the original CFT1 v1, Half Upgrade, and the v2. Use v2 models for Half Upgrade and v2 radio. The v1 case provides a slightly more compact case for the original CFT1 but will not work with the Half Upgrade or v2. The v2…

Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
70
Likes
11
Rating
5
P
Printableschvvkumar

Mele Overclock 4C SVBony Medium Clamp Mount

A mount to attach the Overclock 4C to the dovetail clamp using screws. Parts I used: https://www.amazon.com/SVBONY-Medium-Dovetail-Telescopes-Cameras/dp/B08TC3W79Z…

Print approx. €4.13–€5.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
60
Likes
2
Rating
0
P
PrintablesAdam Kimmerly

KM4CFT CFT1 Transceiver Cover - v1 and v2

Now with CFT1 v2 compatibility. Print this magnetic cover to protect your CFT1, and provide the perfect stand for table-top operation. Rubber pads on four points provide stable, grippy security for your rig as you operate. Use 2 colors of…

Print approx. €1.65–€2.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
49
Likes
7
Rating
5
P
PrintablesJonathan Kayne

Leg Strap Base Plate for KM4CFT Iambic Paddle

This allows you to mount your KM4CFT Iambic Paddle to your leg. Perfect for POTA, SOTA, or even shack use! To use this, you will need a velcro strap from amazon and 4 neodymium magnets . You can secure them using superglue. NOTE: when…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
48
Likes
7
Rating
0
P
PrintablesRonnynnoRMan

TV Riser Feet Stand 4cm

TV riser feet to prevent the soundbar from blocking the screen.

Print approx. €1.46–€1.79 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
3
Rating
0
P
PrintablesPeter Farell

Presonus 1824c knob Replacement : Tight Fit.

Presonus 1824c knob Replacement : Tight Fit. After awhile the original knobs loose there grip and fall off all the time. Use these if applicable.

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
3
Rating
0
P
PrintablesActiva

Most Popular Clay Texture Roller Set – 4cm Wide (Interchangeable)

This Most Popular Clay Texture Roller Set includes a collection of highly requested and widely used patterns. The 4 cm wide rollers allow you to cover larger surfaces quickly and create consistent textures with ease. Designed for easy…

Downloads
2,639
Likes
1,282
Rating
5
18+

The source marked this model as adult content.

Downloads
1,582
Likes
124
Rating
3
P
PrintablesJonathan Kayne

Iambic CW Morse Code Paddle by KM4CFT

This is my take on an Iambic Paddle for CW (Morse Code) Operation. It takes inspiration from the CWMorse Pocket Paddles but is smaller and can be made at home! I Recommend printing this in PETG for durability, but you can print this in…

Downloads
1,035
Likes
142
Rating
5
P
PrintablesLloyd Summers

Food / Freezer Bag Clip - 9cm (90mm) and 14cm (140mm)

This is a super handy clip for the pantry, freezer and just other bags. We use them for chip bags, and freezer stuff. I print them using PLA+, and we have clips that we are still using that have lasted 6/7/8 years in the freezer. And are…

Downloads
809
Likes
85
Rating
4.5
P
PrintablesSpanholz

Cat Food Storage for wet food pouches, 9x14cm e.g. Whiskas

Cat Food Dispenser for Wet Food Pouches Overview Designed for wet food pouches (~9x14cm) Two sizes: Tight fit and loose fit Features Can be printed without support Compatible with popular wet food brands (e.g. Whiskas) Printing Suitable…

Downloads
805
Likes
105
Rating
5
P
PrintablesBakeShape

Circle Cookie Cutter STL File Set – 4cm to 10cm Sizes

🟢 Circle Cookie Cutter STL File Set – 4cm to 10cm Sizes Make perfect circles every time! This downloadable set includes 7 sizes of circular cookie cutters, ranging from 4cm to 10cm, designed for clean cuts and long-lasting performance. 📦…

Downloads
783
Likes
23
Rating
5
P
Printablesachugb

MSI Optix G24C VESA Adapter

Remixed the design by ParabolicTech to work with the factory screws and added recesses for M4 hex nuts Print instructions Category: Parts Summary Remixed the design by ParabolicTech to work with the factory screws and added recesses for…

Downloads
688
Likes
18
Rating
4.5
P
PrintablesСлава К

CYD 2.4 inch Screen Case (CYD ESP32-2432S024C)

Case for CYD 2.4inch run Bruce firmware, my variant has only 1 type-c Big thanks dotStudio to his model!

Downloads
676
Likes
39
Rating
3.5
P
Printablesyamaha26

Mini Modular Drawers 4cm

I searched for storage box on Thingiverse. I find O3D great design the Modular Drawers 2.0 but its too big for my small things (M2,M3 screws nuts, bullet connector etc.) Because of this i made the smaller version. The drawers knob…

Downloads
559
Likes
106
Rating
4.71

Compact rotating platform project- 14cm wide x 2.5cm tall

Seems every rotating thing on Printables needs a stepper motor and a programming degree so I made something that needs just 2 mr128 bearings and the rest can be found in the junk drawer. Wrap the wires around the built-in battery holder…

Downloads
542
Likes
281
Rating
5
P
PrintablesUreleed Records

Tiny Easter Bunny (1,4cm)

just a tiny bunny:) 1,4cm x 0,7cm smaller than 1 penny.

Downloads
466
Likes
103
Rating
4
P
PrintablesValenwood
Downloads
456
Likes
43
Rating
5
P
PrintablesMark Norris

PTFE/Bowden Tube Passthrough with GE4C Spherical Bearing

A remix of Bowden Guide with 360° Print-in-Place Joint by Dennis Bauer that uses a GE4C spherical bearing BOM: As per original 1 x GE4C Spherical Bearing ( not an affiliate link) Print Settings As per original Place the GE4C spherical…

Downloads
372
Likes
140
Rating
5
P
Printablesdreamersdoor

4cm diam sphere mold no screws candle

MOLD CAN BE PRINTED UPRIGHT OR ON FLAT SIDE WITHOUT SUPPORTS this mold is intended for use with wicks dipped beforehand but not required tested with PLA at 3 shells / 10% infill at 150% scale (6cm diameter) there was some leakage due to…

Downloads
364
Likes
71
Rating
5
P
PrintablesJohination

Gnome napkin stand REMIX 4cm width / Zwerg Wichtel Kobold Serviettenständer

my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.2 Walls: 2 Infill: 5% Material: Brand: GraKit Material: PLA Color: Tri-Color Black/Gold/Red printed on Creality Ender 7

Downloads
351
Likes
56
Rating
5
P
Printablesmarshroom

Garden Label 6x4cm - single stake

Measures 10.7cm tall and has a thickness of 0.8mm

Downloads
341
Likes
35
Rating
5

Gingerbread House Cookie Cutter 16cm x 17cm x 14cm/Perníková Chaloupka Vykrajovátko 16cm x 17,5cm x 14cm

ENG version : Gingerbread House Cookie Cutter as collection 16x17x14cm is not only for X-mas. All models are in 3mf for MK3S+, MINI+ and STL for other FDM. Collection : Front side, Back side, Roof, Side, Floor, Big&Small Window Material :…

Downloads
339
Likes
47
Rating
0
P
PrintablesStar_kj

Garmin Striker Plus 4CV Cover

A Cover for the Garmin Striker plus 4CV

Downloads
313
Likes
23
Rating
0
P
PrintablesTalton

Tall Phone Stand (14cm)

NO SUPPORTS NEEDED! Everything is angled nicely, and gaps are short enough that supports aren't needed. I recommend printing on the Y axis (see last image), for stability. Example printed with PLA+ on an Ender 3 V2 Neo, print time was…

Downloads
279
Likes
15
Rating
0
P
PrintablesNocturnal Omen

Xteink X4 RetroCase 4C Snap on Cover

I love the look of the Xteink X4 Eink reader RetroCase 4c from Makerworld https://makerworld.com/en/models/2657757-xteink-x4-full-body-case#profileId-2939295 This is a simple snap on cover I made for it. I printed mine with PLA

Downloads
278
Likes
17
Rating
5
P
Printablesthall72

Lego Compatible (3684c.dat) Slope Brick 75 2 x 2 x 3 with Solid Studs

This model is compatible with the lego system.

Downloads
261
Likes
27
Rating
0
P
PrintablesAtu

Weaving Shuttle (24cm x 2.5cm)

This is a simple weaving shuttle I made for my girlfriend. It's easy to print in PLA. I printed it with 100% infill just to be sure but I don't think it's necessary. I also made a Backstrap Weaving Loom , have a look!

Downloads
261
Likes
58
Rating
5
P
PrintablesNewbie Yep

Arduino DS3231 ZS042 AT24C32 IIC Module Precision RTC Real time Clock Memory mount

Arduino DS3231 ZS042 AT24C32 IIC Module Precision RTC Real time Clock Memory mount. V4 has 2.75mm holes and V5 has 2mm holes Category: 3D Printing

Downloads
252
Likes
15
Rating
5
P
PrintablesEszOzwierz

Gas L96 - Well G96 Project (Front rail and 14ccw adapter)

Hello there, As i really liked my SRS i have tried my luck with Gas Sniper, a classic, WELL G96 (ARES AW338 Compatible) which have some non-standard solutions for todays airsoft standards. First model which i have designed is simple 14ccw…

Downloads
250
Likes
46
Rating
0
P
PrintablesJace1969

SE-14C Blaster

All credit to DrMcKay for generating this model, thanks again. This one needs split and sliced up. I see there is some other good models on Thingyverse, so will let those interested slice it up. Hope you enjoy! Happy Printing Cheers Jace

Downloads
249
Likes
33
Rating
0
P
PrintablesRedWraith

PVC pipe cross joint 4cm diameter

A quick pvc pipe cross joint with a 90 degree angle to joint 4cm diameter pvc pipes.

Downloads
246
Likes
37
Rating
5
P
PrintablesSpacelion

Air Gun Silencer DX M14ccw

My Silencer from the Daisy 881 with a M14x1 counter clockwise thread. Also a short version for lower powered air guns or softair guns. You can use the test print file to test the fitting with your printer settings with minimal material…

Downloads
245
Likes
16
Rating
0
P
PrintablesBakeShape

Premium Square Cookie Cutter STL Set (4cm to 10cm)

Make perfectly sized cookies, toppers, or crafts with this free multi-size square cookie cutter STL set , designed for clean cuts and everyday use. 📦 What's Included: 7 STL files: 4cm, 5cm, 6cm, 7cm, 8cm, 9cm, 10cm square cutters No…

Downloads
223
Likes
16
Rating
5
P
PrintablesShred

Diag64cart Case

This is a case for Sven Petersen's Diag64cart , an open diagnostics cartridge for Commodore C64 and C128 computers. The main work was done by Laurence Gonsalves who published the OpenSCAD source code of a customizable C64 cartridge (CC…

Downloads
220
Likes
11
Rating
5
P
Printablesglsf91

Sonoff 4CH Pro R2 enclosure

An enclosure/case for a Sonoff 4CH Pro R2. Below the sonoff there is some room for wires or/and Screw Terminal Blocks. The walls are 3mm thick. I have used m3 Brass insert nut Injection Molding from…

Downloads
219
Likes
39
Rating
5
P
PrintablesKP design

IKEA dupe tablet/book holder 24cm

Is nice to have in the kitchen, when you have to look at recipes. Inspiration from the IKEA book/tablet stand. Same measurement. Can also be used on nightstand etc. when watching series or scrolling on your tablet. Designed to be printed…

Downloads
219
Likes
36
Rating
0
P
PrintablesPetr Spratků

CYD 2.4 ESP32-2432S024R ESP32-2432S024C Housing Remixed

just housing for CYD ESP32 2.4 esp32-2432s024c with clicking mechanism

Downloads
216
Likes
10
Rating
0
P
PrintablesNatanox

Radxa Rock Pi 4C+ Case (Smaller Version)

Improved version of my first case remix for this SBC. Enables you to put a dust filter fabric inside the case between the shell and the fan. Also added a heat insert variant. Given the low height only low profile heatsinks (≤ 7mm) do…

Downloads
214
Likes
5
Rating
4
P
Printablesnilslorand

Hexagonal Self Watering Planter (16x16x14cm)

Based on the rough working principle of the most popular self watering planters on this website. Walls are thick enough so no leaks occur (tested this myself, sadly I no longer have access to the final prints) Theoretically it's possible…

Downloads
200
Likes
72
Rating
4.5
P
PrintablesNatanox

Radxa Rock Pi 4C+ Case

Simple case for the Rock Pi 4C+. Enables you to use your Pi either passively or with a 40mm 5V fan of up to 20mm thickness. In case you got very chonky heatsinks the taller case part with a 10mm fan will most likely work for you. You need…

Downloads
192
Likes
1
Rating
0
P
PrintablesBakeShape

Premium Arch Cookie Cutter STL Set (4cm to 10cm)

Add a modern touch to your bakes and crafts with this free arch cookie cutter STL set , featuring 7 sizes for total versatility. 📦 What's Included: 7 STL files: 4cm, 5cm, 6cm, 7cm, 8cm, 9cm, 10cm arch-shaped cutters Prints flat with no…

Downloads
191
Likes
16
Rating
5
P
PrintablesInqEnzo

44cal revolver cylinder box

Colt may claim that their Peacemaker is how the west was one, but that's a bit of a stretch. The truth is that repeatable firing weapons like the revolver were the real MVP. Before them we had black powder rifles and pistols the fired…

Downloads
188
Likes
15
Rating
5
P
PrintablesT-bone

Garmin Striker 4CV Sunshade

Summary This is a remix of another design. This will fit the Garmin Striker Plus 4CV. Could use some minor tweaking but does what its suppose to do. Print Settings Rafts: No Supports: No Resolution: .16 Infill:25 Filament brand: PLA or…

Downloads
184
Likes
14
Rating
5
P
PrintablesAxel Torsson

Xiaomi Redmi 14C

Xiaomi Redmi 14C mobile cover / protector I printed it in TPU. it is in 2 parts for easier printing and even possibility to print the ring in a harder material. (the photos are obviously taken with a different phone) Category: Other

Downloads
183
Likes
5
Rating
0
P
PrintablesBrian Zhang

pokemon monster ball 4CM

you can put nfc card in this pokeball or any you can....

Downloads
168
Likes
30
Rating
0
P
PrintablesFlo_vo Design

Lightbox Back To The Future Big Led Lamp 54cm Gamer

large version that needs to be printed in several parts. The parts need to be glued together in the end. For smaller printers, parts may need to be cut. Happy printing

Downloads
163
Likes
96
Rating
0
P
Printablesegalindo1945

PERNO + ARANDELA 4CM*3MM

Perno............4cm*3mm arandela........0.5; 1.0; 1.5; 2.0; 2.5; 3.0

Downloads
161
Likes
2
Rating
0
P
PrintablesMAVERICK_CZ

AK muzzle brake Jmac 4C

copy of the Jmac Customs 4c compensator (not 1:1 copy) its in diameter 2mm bigger and the overall dimensions are from picture not mesured i tried to have the visual simularity its just for the looks XD the supports are insane for this…

Downloads
161
Likes
22
Rating
0
P
Printablesfissi0n - K1TDG

FX-4CR HF Radio Folding Stand

This model is a stand for the FX-4CR HF radio. I got sick of balancing the radio on $things, or laying it on its back and not being able to see the screen. To complete the stand you will need 2 x M3 x 40mm bolts. These will be the hinge…

Downloads
154
Likes
10
Rating
5
P
PrintablesFluffy

Porsche Quartet: 74cm Elegance

Made it to a 4 piece so it can be much larger. Added a picture before the assembly with the Kingston usb for size.

Downloads
154
Likes
22
Rating
0
P
Printablesffejrxx

18650 rack, 6x4 (24cell, 6s4p or 4s6p)

good for 24 x 18650 cells in 6s4p, or 4s6p, or just 24s configs small bump in rings to hold cells securely, print 2 racks for top/bottom of cell pack

Downloads
146
Likes
8
Rating
0
P
PrintablesNordlandbahn H0

Inneneinrichtung für Märklin 4064 Schlafwagen (24cm / H0)

Dies ist eine Inneneinrichtung für den Märklin Schlafwagen 4064

Downloads
141
Likes
12
Rating
0
P
PrintablesZac Saprun

Coil Pack Cover (FIAT/ALFA 4Cyl)

Decorative cover for various Ignition Coil Packs. For FPT 4cyl engines (Alfa/Fiat/Jeep/Abarth/Lancia) : BOSCH 0 221 504 713 ( Abarth "legendary BLUE" ) BOSCH 0 221 504 026 ( Alfa Giulietta, 4C - 1750tbi ) BOSCH 0 221 504 707 ( 1.4…

Downloads
139
Likes
13
Rating
0
P
PrintablesHrumque

Air purifier (for xaiomi filters from their purifiers) with 14cm fan

fan (140mm, better some speedy fan, 1800-3000rpm at top speed) is mounted to top part, then bottom part (coupling for air purifier filter) is screwed to fan base.

Downloads
138
Likes
21
Rating
0
P
PrintablesTioh

Movable eyelid for 4cm Ping Pong Ball

I build hand-puppets and made these type of movable eyelids by hand in the past. This is my first working model for simple eyelids. They fit exactly over a 4cm Ping Pong Ball. Category: Robotics

Downloads
138
Likes
19
Rating
0
P
PrintablesLotus

14CCW Airsoft Suppressor, FOAM!

The suppressor is 7" long and 1.3" (34MM) in diameter. I printed with %25 infill (Grid). No supports needed! Enjoy and leave a comment if you print it!!!! *Sorry i don't have the best pics for this model * This is free for you to print,…

Downloads
136
Likes
10
Rating
0
P
PrintablesMFTuning

Xiaomi Mi Router 4C Wall Hook

Крюк для крепления роутера Mi Router 4C к стене Category: Organization

Downloads
130
Likes
13
Rating
5
P
Printableschvvkumar

Pocket Powerbox Advance Gen2 - MeLe Quieter and Overclock 4C Bracket

Thanks to reddit user hclrke for providing his design so I could fine tune the hole spacing and vertical supports. Used M3 socket cap screws of suitable length to mount the plate to the Mele as well as to mount this assemble to PPBAV2. I…

Downloads
130
Likes
3
Rating
5
P
Printablesthall72

Lego Compatible (3404cc01.dat) Turntable 4 x 4 Dimpled

This model is compatible with the lego system.

Downloads
127
Likes
21
Rating
0
P
PrintablesPerendinate

Msi Optix G24C Vesa Adapter 100x100

Was sick of the non-adjustable stand so I bought a VESA mount for my monitor but adapters were around $30 on amazon so decided to make my own. The VESA adapter is designed for the MSI optic G24C however may work for other monitors.…

Downloads
122
Likes
8
Rating
0
P
PrintablesAntonín Gazda

4cm Bias Tape Maker

This is a remix of bias tape maker from https://www.thingiverse.com/thing:3880491 by Oscarko for 4cm tape Category: 3D Printing

Downloads
120
Likes
18
Rating
4.8
P
PrintablesSPEKERDUDE

4CH Wifi Relay Board enclosure (MHCOZY)

simple case For 4 ch relay board from amazon MHCOZY brand i have included fusion360 and step files for the housing and the board to use if you would like to modify mine or make your own! Please note you may need to snap off the extra…

Downloads
117
Likes
14
Rating
5
P
PrintablesWizardTo

D1 mini & ADS1115 & 4ch relay

This is a remix to put them all inside a case.

Downloads
110
Likes
7
Rating
0
P
PrintablesWetdesign

Binding tool for sewing 4cm

Print it standing on one of the open ends. No supports needed, but a brim is recommended. When using the tool, cut a 4 cm wide strip of fabric with a narrower tip. Feed it in from the flatter side and feed it through with the tip of your…

Downloads
109
Likes
34
Rating
0
P
PrintablesRolf Bakker

PiKVM R4C3R PCIe bracket mount for RPi Zero W

This is a PCIe bracket on which a PiKVM setup can be fixed based on a Raspberry Pi Zero W + Lusya HC100 Ver:A01 HDMI to CSI bridge + 3cmx7cm pcb with ATX power on/off + reset. Check out the awesome PiKVM project at https://pikvm.org/…

Downloads
109
Likes
17
Rating
5
P
PrintablesBogdanBogvzyan

Darkroom Paper Safe 7x9.5"/18x24cm

This is a PaperSafe box for printing in darkroom. It is resistant to bright light and gives quick access to photo paper without having to constantly open and close the paper package. The size is adjusted for printing on a Bamboo Lab P1S…

Downloads
108
Likes
21
Rating
0
P
Printablesmari

drainage hole screen 4x4cm

This small screen will cover your pots drainage hole(s). It holds the soil back, whilst water and air go through easily

Downloads
103
Likes
9
Rating
0
P
PrintablesOndra

Sonoff 4CH Pro R2 enclosure bigger

Remixed model "Sonoff 4CH Pro R2 enclosure" in order to integrate also a tiny power adapter inside

Downloads
101
Likes
24
Rating
0
P
PrintablesCyb3rC0de

Simple Ruler - Metric (14cm)

As there seems to be some sort of ghost in my office who steals my rulers, I always need a ruler, but never have one. So heres a quick print for a 14cm Ruler (15cm total) which prints in 16 mins. Ideally you want to print the numbers in a…

Downloads
101
Likes
7
Rating
0
P
Printablestom198

Držák na kolo pro mobilní telefon Xiaomi Redmi 14C (Bike holder for Xiaomi Redmi 14C mobile phone)

Držák na kolo pro mobilní telefon Xiaomi Redmi 14C se silikonovým pouzdrem. Bez silikonového pouzdra bude mobilní telefon v držáku příliš volný (Bike holder for Xiaomi Redmi 14C mobile phone with silicone case. Without the silicone case…

Downloads
99
Likes
2
Rating
0
P
PrintablesSufos8

shrimp tunnel shrimptunnel 14cm

it's a shrimp tunnel that you can put in your aquarium soil so the shrimps can hide and explore while you can still see then trough the glass

Downloads
98
Likes
6
Rating
0
P
PrintablesWeaponsmith

Merkur Mk34c safety razor stand

Prints without support. I used 0.2mm layer height

Downloads
98
Likes
17
Rating
0
P
PrintablesKaosuNeko

4ch mosfet module DIN rail mount

4ch MOSFET module DIN rail mount 60x60mm mounts holes Compatibility: 4 ch MOSFET module 35mm DIN rail Mounting components: M3 screws M3 stand

Downloads
97
Likes
17
Rating
0
P
PrintablesFrogree

Voron 2.4 exhaust slot cover with GE4C bearing

allow circular movement of PTFE tube. 1ea GE4C bearing and 4ea M3 BHSC 6-8mm needed GE4C(https://www.aliexpress.com/item/1005001865254355.html)

Downloads
95
Likes
23
Rating
5
P
Printables3DM-DeMeern

Ikea Samla wall holder 14cm

The way you can store your filaments in the Ikea Samla boxes is great. But then you need an cupboard to place all your Samla boxes in. And I did not want that. So I created two holders that combined can hold a full Samla box. I have…

Downloads
94
Likes
24
Rating
5
P
PrintablesLexFran

14cm Alhambra Rosetta Arabesque Lamp

A smaller redraw of the 20cm version https://www.printables.com/model/628369-al-hambra-alhambra-rosetta-arabesque-lamp-20cm Preferably print with a brim, no supports needed, for best result, at least 3 walls

Downloads
94
Likes
32
Rating
0
P
PrintablesNeoffix

BT4-4CHN Tester Front Panel (18650/21700)

This front panel is designed for the BT4-4CHN tester in the version that supports both 18650 and 21700 battery types. My model does not include holes for external battery connection. Installation recommendations: Fit the printed panel to…

Downloads
92
Likes
5
Rating
0
P
PrintablesLoredan

Tobii Eye Tracker 4C mount for Mi Surface Display 34'' 1500R

Originally I used this mount https://cults3d.com/en/3d-model/gadget/tobii-eye-tracking-4c-curved-monitor-mount , but I was unhappy with it because tracker holder wasn't snug and allowed the tracker to rotate, and stable positions were…

Downloads
91
Likes
8
Rating
5
P
PrintablesIbPalle

12cm PC fan to 14cm PC bracket adapter

Shamelessly remade from pictures of a Noctua product that does the same thing. An adapter to mount a 12cm fan to a 14cm fan location. Print instructions Nothing special. Any type of filament and settings will do the trick.

Downloads
88
Likes
13
Rating
0
P
Printablesmarshroom

Garden Label 6x4cm - twin stake

Not only one prong, but two for billboard-style labeling ; ) Measures 10cm tall and has a thickness of 0.8mm

Downloads
84
Likes
9
Rating
5
P

EFW4CH - Jointed Robot

Created by large corporations as a highly adaptable and agile robot to recover and deliver packages across various obstacle-filled environments, such as mountains, valleys, or forests, gone rogue due to faulty programming. Print in PLA or…

Downloads
84
Likes
17
Rating
5
P
PrintablesGriffin

MSI Optix Mag 24C Vesa Mount Spacer

The spacer you need in between your MSI Optix Mag 24C and your Vesa mount. It's a simple spacer, I printed mine out of PLA with a 20% infill and it took about three hours on my Prusa Mk3+ The holes on the monitor are threaded for an M4…

Downloads
84
Likes
3
Rating
0
P
PrintablesYounis

Heart shaped pendant - 4cm, scalable

This is a heart shaped pendant or keychain. Its width is 4cm and its height is 1cm. It prints easily when you use supports.

Downloads
83
Likes
8
Rating
5
P
PrintablesMadSoul3D

Remote Case for Xiaomi TV MI 4A 4C 4X 4S

TPU filament Use brim and 25mm/s speed Category: Other

Downloads
83
Likes
12
Rating
0
P
PrintablesTempoWrites

Subwoofer Speaker Leg Replacement 4cm

Designed to fit a Jensen CS10 Powered Bookshelf Subwoofer cabinet, but easily scaled to fit other audio equipment. The original rubber leg had a steel washer to make the screw hole rigid, but I've been able to skip that piece. The screw…

Downloads
81
Likes
9
Rating
0
P
PrintablesVagnPetersen

Merkur 34c travel case

Remixed the original files to fit the Merkur 34c

Downloads
78
Likes
9
Rating
0
P
Printablesdotmakes

IKEA Vörda 6in 14cm knife sheath

Very nice and light sheath by @MatthewGTaylor , rescaled to fit the 14cm/6in version of the knife. I like to take this knife with me for cooking on my travels, so a sheath is a must. This is my first remix: please let me know in comments…

Downloads
77
Likes
7
Rating
5
P
PrintablesTanis.Tech

24cm x 24cm Nanoblock base [6 x 6 bases]

Slice and print! This will come out at 240mm x 240mm so make sure your printer can handle that size! on my K1 Max its a treat! These are perfect for building scenes with your nanoblocks as you can see from the pics! Big <3 to the original…

Downloads
77
Likes
7
Rating
0
P
PrintablesBogomips

Merkur 34c cover

I was looking for a blade cover for my Merkur 34c safety razor and what I found was: Expensive. Flimsy and not really practical. Really well built but annoying for an every day use (travel cover hard to remove). So I designed 2 covers…

Downloads
76
Likes
14
Rating
4
P
Printablesstapler

Merkur 34C clip cover

Remix of @bogomips' great cover, but with a chamfer added to remove the overhangs.

Downloads
75
Likes
11
Rating
0
P
Printablesjwueller

Low-Profile GE4C Bowden Tube Passthrough for 3mm Panels

This is a from-scratch redesign of “PTFE/Bowden Tube Passthrough with GE4C Spherical Bearing” by Mark Norris , maintaining the same footprint and hole spacing for compatibility while introducing key improvements. Design Goals Full Range…

Downloads
72
Likes
21
Rating
5
P
PrintablesLion

Metric Whiteboard Set Square (24cm / 30cm)

Intended to stick some flat magnets on the bottom to put it on a whiteboard, but also usable on paper. I only printed the 24cm version because it is big enough for me. Would be nice to see the 30cm in reality so I'd be happy if someone…

Downloads
70
Likes
5
Rating
0
P
PrintablesOT

14cm Schiessscheibenhalter auf 160mm KG Rohr für Luftgewehr

Der Scheibenhalter bietet Platz für 14cm x 14cm Zielscheiben. Alternativ kann seitlich eine M6 Gewindestangen zum tragen von Silhouetten eingesetzt werden. Das Modell besteht aus mehreren Objekten, die mit Prusa Slicer getrennt und auf…

Downloads
68
Likes
2
Rating
5
P

PC Case Fan cover 5.25" for 14cm fans

Fan holder to put in four 5.25 slots in the front of old PC case to create an airflow You probably should add a mesh between the main part and the ring to protect the fan from inquisitive fingers (I used superglue to put everything…

Downloads
68
Likes
5
Rating
0
P
PrintablesTerrain4Print

Box divider for IKEA Samla (39x28x14cm)

Print two of these, print two more mirrored. Plop them down into a IKEA samla, the one that is 39x28x14cm (Article number 401.029.78). They will neatly divide the space into 8 compartments.…

Downloads
67
Likes
17
Rating
0
P
PrintablesGael Sold

Dual Hose for 14 000 BTU EQUATION A0111-14CH (there are clones) - Double sortie pour Clim EQUATION Leroy Merlin & Castorama

There are Two parts to print ; 1. The back cover (I printed in several parts then glued) 2. The hose connection, here I choose to make the same design than the orgininal, but you could design what you prefere (I glued it too). The device…

Downloads
66
Likes
4
Rating
5
P
Printableschvvkumar

Desk stand for Waveshare ESP32-P4-WIFI6-Touch-LCD-3.4C

No supports needed for V1. V2 needs supports. Print face down for a smooth front side. The display fits in the case by friction when printed on my Prusa Mini+. 02/03/2026: V3 - Added a small inward chamfer sloping towards the screen.

Downloads
66
Likes
12
Rating
0
P
PrintablesLilMikey

PCB Holder 4cm x 6cm

I created some amplifier circuits for my virtual pinball project: http://lilmikey.com/2017/02/16/virtual-pinball-cabinet/ I build them on small, cheap uxcell 4x6cm perf boards:…

Downloads
64
Likes
6
Rating
0
P
PrintablesHespoHusky

Pyrex Lid Holders 2C, 4C, 7C

I got tired of my Pyrex food storage lids ending up all over the cupboard, so I designed these caddies to keep the lids in a neat stack. There is 1 for round 2 cup bowl lids, and 1 for round 4 cup bowl lids and up to 3 lids for round 7…

Downloads
63
Likes
10
Rating
0