Gridfinity Pen/Sharpie Stackable Tray 4x2x4
Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design
Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant
- Downloads
- 839
- Likes
- 104
- Rating
- 4.89
293 models
Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design
Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant
Forma służy do uformowania klocka LEGO 4x2 naturalnej wielkości. Dzięki dzielonej formie gotowy klocek można łatwo wyciągnąć. Gotowy klocek możesz pomalować pisakami spożywczymi. Pamiętaj!!! Do wydrukowania formy wykorzystaj materiał…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
Summary: The original part cooling fan for my Ender 3 broke. I like noctua. I did not want to buy any extra hardware to mount it. It took like 3 months of iteration to land on this design. I've included the .obj, .stl, .3mf, and .gcode…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
Gridfinity Shelf for the Honeycomb Storage Wall . I designed this to hold firm on your Honeycomb Storage Wall. Compatible with all your Gridfinity storage containers. Get your Prusameters… Post your Makes! If you like this project, please…
Garbage Bin - 24x24x45 cm Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Fully Printed Waste Bin Tub under needs a bit of support 240 x 240 x 450 mm…
Remix of the original pen tray to fit a 4x2 gridfinity.
I re-modeled this with the exact dimensions from charlescho's design, except I reduced the height by 10mm.
Two options for attaching back (cleat) CA glue. Designed with a mating registration surfaces to locate horizontally in the center and to give lots of strength for almost all purposes with just CA glue Hardware, made for ¼ bolts 2 x ¾"…
Battletech stackable miniature storage tray Small 4x2 and 4x1, Stores 8 and 4 mechs or wider units like Aero/Vehicles Trays stack on each other It's stacking compatible with each other Fits all mechs if you want more storage density…
Here's an odd one for you. :) It is a funnel tray that works with Gridfinity. You know, when you empty a bin, to find that particular item. That what's the tray is for. Then when you're done, and want the rest of the items to return into…
A shallow tray for Sharpie Pens. Two depths. Deep on better for stacking. The shallow one site nice as a top tray - I needed it to fit an extra layer in the draws I'm using.
My design for GPU Cable Comb for braided cable extensions for 3mm OD cable extensions there are 3 files 4X2, 8X2, 12X2 for 8 pin PCIE cable. good for 24 pin too (12X2). ***Designed with a 0.4 nuzzle in mind**** printed in PLA+ with 100%…
Hey, this is my first upload on Thingyverse and I'm happy to give something back to the community. This thing has gone throug a lot of testing and is now in a state I feel comfortable publishing it. This is finally a Duplo compatble brick…
I just want to say that these really do fling dirt / rocks / gravel behind them in a HUGE arc. These tires are not good if you are around anyone who does not want to get peppered with rocks and dirt. These can easily fling rocks 30 feet…
Angle Bracket 30°- 45°- 90° - M6 - 1/4x20mm Slots The Bracket is a rigid angled mounting plate, available in 30°, 45° and 90° configurations. It features slotted faces for adjustable positioning and is compatible with both 1/4-20…
This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…
Print with 100% Infill because there aren't any big wholes.
I liked the original stack model a lot but I realized I can't stack another one on top so I made my own for the bottom to hold an extra 4 vertically. I took the original and remade it from the ground up with as much fidelity as I could…
Version v1.1: changes of the wall thickness Holder would be putted directly on the screws of the Heatsink. fan Noctua A4x20 would fixed with 4 M3x20 screws One Metallholder in the housing have to be bended
This nut matches the spec used on Bora's Centipede expandable workbench system. Standard nuts are too tall and wide to fit with their 'p-top' and riser accessories. It's unfortunate that Bora makes it this difficult to replace a small,…
Just remixed the model to fit two instead of three glasses
Ender 3 V2 Lead Screw Knob T8x4x2 (8mm, 4 start, 2mm pitch) Designed in FreeCAD. Ender 3 v2, Prusament PLA, 0.4mm nozzle, 0.2mm Layer height.
What if you could hang Gridfinity bins on a pegboard without the mess of glue, but with the securing magnets? I use Gridfinity Refined for bases and baseplates. 6x2mm magnets are either friction or snap fit. I do use a bit of hot melt…
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
Remix of the original Small Sanding Block that uses M4x20mm screws. This version requires M4x25mm screws so it is a bit higher (duh). Knob and Cap are unchanged in this remix. For detailed description please refer to the original model.…
Organize and store your component. This drawer is made for smaller components, tools,etc, you decide what to put :). There are 2 different drawer available : Drawer 1x1 Drawer 2x1 - with 1 separator You will need to print 8x Drawer 1x1,…
Case for the raspberry 5 with the Noctua 40x20 5v fan. To assemble this project, the following are required: Raspberry Pi 5 Noctua NF A4x20 5V Fan (can be PWM version) with 4 screws 4 x M3 25mm screws (to join the top and bottom) 2 x M3…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Some people are looking for this pin for the Gravity Fidget knife so I thought I would upload it. It's a very tight fit in the knife. You may need to print it at 99% depending on printer/filament. I suggest printing upright with a brim!
A way of adding a 4x2 Lego Compatible brick to an Ikea Skadis for displaying Lego.
Knurled Knob for 1/4x20 nuts and bolts. I really like the feel and grip of the knurled knob, and it has a smaller footprint than wing knobs. This is perfect for woodworking jigs that use T-track 1" outer diameter, fits the 7/16" head on a…
Bitte sorfälltig bis zur letzten Zeile durchlesen: Gedruckte Gehäuse für Sinterbronze Gleitlager in Fest- und Loslagerausführung. Der 14mm CAD-Gehäuse-Bohrungsdurchmesser ist auf 14.10mm Spielmaß konstruiert. Beim Festlager sollte das…
Simple adaptor for mounting a whoop stack to a 20x20 mount, can be reversed to do the opposite. I will be using it to mount a happymodel diamond dvr vtx to a 20x20 mount. Holes should be tight enough for the screws to bite, so nuts…
Rpi4B case designed to be use with a NOCTUA NF-A4X20 5V FAN Use the screws provided in the fan package to mount the fan on the Rpi Support. Use M2.5 screws to fix the Rpi on his support *Gaps in front of the fan section could be use to…
Zum schnelleren Abspannen der Poolplane für einen Bestway 4x2m Pool Die bestehenden Files haben entweder alle nicht zu meinem Pool, oder den Spannern gepasst, also in fusion selbst einen entworfen. gedruckt mit prusa mk3s 0,6mm nozzle und…
Tired of nonthreaded 3d screw models? tired of looking for screws to print only to find no models? Well look no further for my M4*20 H3 COUNTERSUNK SCREW, unlike my other one it is threaded!
We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) To get…
2x4 Box with matching 2x4 lid Scaled the original design by @ Teppetuary 's 2x5 box design to be 2x4 to match my needs. Snack ziplock bags don't fit without a slight angle, but not a problem for this smaller box to save the space and…
I've edited the Battery Box below to be compatible with Gridfinity and also have Space for more Batterys. It can hold: 25x AA Battery 20x AAA Battery 10x CR2025 or CR2032 Battery Small Container for other things (ex. Empty Batterys)
If you are unfamiliar with the Omnifixo, it is by far the best “helping hands” system I have used for soldering. https://omnifixo.com I wanted to create an compact footprint Omnifixo case that was also compatible with Gridfinity. The…
Uses up to 12x 4x2 magnets - add as many or little as you like. I had issues with other light bars that eventually fell into the printer, so I made my own model adding more magnets to ensure they stand up to the test of time!
Divided the original box into 3 segments to store my baking ingredients. The dividing walls are 2mm thick. Printed with: Bavaria Filaments PLA Galaxy Silver @195°C on Qidi i-mate S 0.4mm nozzle 0.24mm layer hight 20% infill
This hex bit holder holds: 26x short hex bits 9x long hex bits 2x hex extenders In a Gridfinity bin 4 tall x 2 wide x 4U tall
While rebuilding the guardrail for my old deck, I needed to cut grooves into 4x2 studs to hold vertical glass panels. It is my first time using a plunge router and I did not trust my ability to cut in a straight line, so I made this plate…
Remix of Multiboard gridfinify shelves von David D | Kostenloses STL-Modell herunterladen | Printables.com to use it on honeycomb storage wall system.
Fan cover A4x10 / A4x20 (Noctua) Cover for A4x10 and A4x20 fans. Just put it over and screw it with the fan. With and without cable routing available. The width has a little bit play, the height is adjusted to my printer, if needed…
I uploaded this as a remix because I made this quick modification to my original design, and I have not printed it, nor do I have any speed champions cars to test it with. I would use the same printing instructions as the original, and…
Battletech stackable half height miniature storage tray 5x2 and 4x2, Stores 10 or 8 vehicles. Trays stack on each other (two trays stacked equal the size of one regular tray) It's stacking compatible with the 4x2 and 4x1 full height small…
I am always short of some bricks when creating LEGO MOCs (My Own Creation), so I am using FreeCAD and my printer to create temporary placeholders when prototyping. This model is a brick compatible with LEGO's brick no. 4871 - ROOF TILE…
This mount allows you to mount the thicker Noctua NF-A4x20 fan to your Ender 3 V2 Neo. Should work with any 40x40x20mm fan though. This model is a slight modification of Ihor Pomaranskyy's Noctua design.
Remix of @HellfireHD_125784's model. Based off the Gridfinity design by Zach Freedman, this stackable tray was designed to hold 18 8mm x 180mm pencils. Part size: 210x167.5 It uses 6x2mm magnets as per Gridfinity design. I recommend…
Hello, these are gridfinity boxes 4x2 with different height 60mm 70mm, 80mm I hope youll like it
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
I needed to ship a handful of Intel CPUs and I didn't have any proper way to mail them. I wasn't a fan of any of the trays I could find on here and they didn't seem to be heavy duty enough to my liking for mailing. This is a bit thicker…
This is an organizer of Amsterdam acrylic paints of 20 ml for 24 units.
I print upside-down so that my PEI plate creates a rough texture on the top. But you can orient either way. Check out my video where I review the game and show how I texture my bases:
Divided the original box into 6 segments to store my packs of spices. The dividing walls are 2mm thick. Printed with: Bavaria Filaments PLA Galaxy Silver @195°C on Qidi i-mate S 0.4mm nozzle 0.24mm layer hight 20% infill
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Holds a Draper 6 Piece Diamond Needle File Set - will likely hold most needle file sets in a 4x2 Gridfinity holder. Measure approx 30mm tall when filled, good for shallow drawers. Replaces a much larger and flimsier tool case.
This is a Hot end cover to replace the stock Ender 3 or 3 pro cover. Should fit cr10 etc. It is extended in order to fit a Noctua NF-A4x20 FLX 12v fan. It's dramatically quieter and still has great air flow. Uses all of the stock…
A 4x2 Gridfinity assortment box. It stacks, it locks and if the locking clips wear out you can simply replace them, instead of having to trash the whole box. Requires 4 M3x12mm screws and 4x M3 nuts per Box/Lid for the clips.
Gridfinity charger holder in a 4 by 2 base plate arrangements. You get 4 bigger holes and 2 smaller ones: 4 big ones: 32.4mm x 82mm 2 small ones: 32.4mm x 40.5mm
🧱 Mattoncino LEGO Compatibile 4x2 – File STL Stampabile Questo file STL ti permette di stampare un mattoncino compatibile con il formato LEGO 4x2 , un componente classico e versatile. La sua forma rettangolare, con otto punti di…
I wanted to optimize airflow for the BD790i inside my Fractal Ridge case. Played around with different fans and found out that the big NF-A15 and - even better - the newer NF-A14x25r do fit nicely in that setup. The new one even without…
This a Lego-compatible Brick i designed :) I'm just a small creator, so i would REALLY apprechiate a like! Thanks to everyone! Also look at the MakerWorld model : https://makerworld.com/de/models/1365762-brick-2x4-leg0#profileId-1411399
Noctua NF-A4x20 Fan Reference Model Also included is a .skp
This is my custom 3D printer enclosure. The interior dimensions are a 24inx24in base and 30in height. My goal was to fit my Ender 3 Pro, with every printed part small enough to be printed on that machine, and in a standard size that was…
After 15 different versions, this 3D printed Lego is fully compatible with original Legos. Make sure to follow us so you get notified when we upload a new model! You can also follow us on Thangs Find us on Instagram here
A 1X4X2U bin made to hold 2 Olfa Craft Knives with thumb slot for easy removal of the craft knife
Napkin, paper towel, tissue box for IKEA Fantastisk Print with at least 0.30 dimension: 125 mm x 125 mm x 50 mm
Now compatible with Pi5. Things worthy of note: Pi5 has an integrated Powerbutton. The placement on the PCB is not compatible with the idea of this case. Solutions: Round hole on the side of the case you can reach the button with a small…
Gridfinity 4x2 holder for Brother PT-P710BT label printer I used a 0.2mm layer height with a 0.4mm nozzle. Included is the f3d file
Vymodelováno ve FreeCADu. Montáž vyžaduje 4 vruty pr. 2,5 x 20.
Added a back plate so cars don't fall out when my kids are playing with the display, I intend to later turn this into a storage solution for hotwheels cars.
The CF85 Day Cab 4X2 5000mm Flatbed scale model is a highly detailed and accurate replica of the DAF CF75 Flatbed truck This 3D printable model has been designed to be fully assembled, motorized, and functional. This model features many…
Gridfinity compatible (4x2) filament swatches container with lid and two storage options: Lid on the bottom to have access to the swatches Lid on the top (either for storage or transportation) and space for 45 swatches. The lid snaps in…
A project box with an opening for a 4x20 LCD display, and plenty of room to add items inside. Has a back that snug fits. This was designed for a specific project, so you may have to add or remove parts of the inner rear cover for your…
Model A more accurate fit compared to the original model. X1C - Noctua Fan 40x40x20 35x18 More info on the original page. Fan: NF-A4x20 5V PWM I used the original fan connector Bambu Fan Noctua fan White → Blue Light Grey → Green Black →…
When I saw the mounting for this fan I thought someone might wanted it to fit a 140mm bracket. So here they are. Took me about an hour to model (that's included the fan) and since the 1st test worked so good, I'll not be making any other…
Remix model: 6 segments - divided Gridfinity bin 4x2x11u by: w3rN42 My model has 11 segments. The remaining dimensions are the same as in the original. Thank you very much for sharing the model that I could modify. It made my work much…
This is an HDD cage designed for the BitFenix Portal case, but it's versatile enough to be compatible with various PC cases. It offers maximum space utilization for small computer enclosures. Providing an efficient storage solution for…
So far I have only tested this print with PLA on my Creality K1max printer. I have managed to print it without any brims and with no noticable warping using a bed temperature of 60°C. Before that I had tried 50°C and there was a little…
Onshape CAD link for those interested in making changes in the design: https://cad.onshape.com/documents/143c740f42cb21cc45906fdf/w/4bc4bac1614f8c690bb5c467/e/82f31ec3f743aeb42d9d5409 Changes, 19/5/26 - added file for old housing…
* UPDATE * I have designed the fourth and final iteration of paddle tires for my Traxxas Rustler. * UPDATE * I have designed the third iteration of paddle tires for my Traxxas Rustler. * ORIGINAL * This is a slightly smaller paddle tire I…
Remixed of the original for 4x2mm magnets that I had. Followed the same sizing as the original (SIZE+0.1mm diameter of hole, SIZE+0.5mm to depth of hole). The top part is the same un-edited from the original. Would recommend using a alley…
Cover for Arduino LCD 4x20. Thanks to it, you will not see the black display frame. Dimensions: 115x65x2 mm
Lid fits securely but is easy to slide off. Printed in white PLA for food safety. Customized version of http://www.thingiverse.com/thing:201304 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=201304 Print…
This is a cable holder that utilizes 4mm x 2mm magnets attached to the cable and the mounting rail, to allow for easy mount and release of cables. You need to choose the cable clips (the thingies attached to the cable) according to the…