60kg Servo DS5160 SSG
this is a mockup of the strong 60kg Servo DS5160 SSG for further 3D constructions. it was not designed to be printed! I used it to construct bracket adapter like this :
- Downloads
- 355
- Likes
- 9
- Rating
- 0
Counting matching models…
this is a mockup of the strong 60kg Servo DS5160 SSG for further 3D constructions. it was not designed to be printed! I used it to construct bracket adapter like this :
Single support for Mellow's TMC 5160 HV to be hooked to the DIN rail I made them for my VZ-Bot 330 that I have under construction. I printed them with PetG You will need for each support: - 8 M3 x 4.6 brass inserts; -4 M3 x 10mm screws;…
VZBot electronics mounts on din rail: Orange Pi 3LTS BTT Octopus PRO with 5160 Only BTT Octopus PRO PSU Meanwell RD35 DINrail clip You'll need screws and nuts M3
I needed one of these plastic self locking bolt and sleeve assemblies for an IKEA Kura bed I bought thirdhand, that was missing some. So I took out one good one, measured and modeled up a similar design. Printed with 0.4mm nozzle in PETG…
DIN rail adapter for use with BTT TMC5160T w/ Case Recommend using button head cap screws for mounting.
M3X8 FHCS *4 @M3X8 BHCS *4 @M3X12 BHCS *12(適用於 4010 風扇*8)
A 3D printed case for the Bigtreetech TMC5160T Plus based on their CNC case. This is a relatively complex and thin print with fully supported holes that stays within the footprint of the board. This model supports the attachment of a 3010…
For external stepper driver BTT TMC5160T PLUS V1.0 (w/o case) . Assembly Guide Fit [POS 2 - adapter] to [POS 3 - DIN rail bracket] using 2x [POS 6 - screw - M3x8] to create [sub assembly 1]. Fit [POS 5 - axial fan - 3010] to [POS 1 - fan…
Fly TMC5160 V1.2 DINrail mount Compact DINrail mount for FLY TMC5160 V1.2 or V1.5 if you use a VORON printer and just need two, instead of four drivers. 12V 4010 axial fans can be clipped inside of the mount if your flow settings are…
Sorry for the bad Fusion design, still learning. Had to design my own and shift it above the DIN rail to get more space on the V-Core 3 200. The DIN bracket is not my design this is reused because it fits nice and has heat inserts. DIN…
This is a MCU Board mounting bracket for Octopus and Manta M8P that holds 4 BTT TMC5160T Pro drivers for AWD Mods/VZbot. BOM: 20X M3*4*5 Heat set inserts 20X M3*8 SHCS (If using the fan cases in the picture then 16X M3*10 and 4X M3*8) Two…
Here’s a simple and effective DIN mount for the BigThree Tech Octopus Pro with 4 x 5160T Plus stepper drivers. In addition to holding the motherboard and stepper drivers, this mount also allows you to install 4 x 40mm fans to cool the…
this is a new bottom cover for the big 60kg Servo DS5160 SSG to get a u-bracket as it is almost impossible to buy these servos with the right brackets, even though they are offered with them everywhere. when you receive the package you…
Knipex 3125160 needle nose pliers needle nose pliers Greifzange. 2x5 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
補貨清單:@M3X8 FHCS *2 @M3X12 BHCS *8(適用於4010風扇*4)
This is a mount to retrofit 4x BTT TMC5160T Plus drivers onto the VzBot Mellow Super 8 Mount as designed by Simon Vez in place of the Melllow TMC5160 drivers. The mount elevates the drives sufficiently to clear most wiring channels. Add…
Double DIN Mount BTT TMC5160T Plus Narrow DIN rail mount for two BTT TNC5160T Plus external stepper drivers using the Voron PCB DIN rail clips. BOM 8x M3x8 (SHCS or BHCS) 4x M2x8 selftapping screws (uses the standard Voron ones) 2x BTT…
Only 4 M3x8 bolts are needed. Does not need heat inserts. Just screw into plastic. You can use nuts instead of the fan mount if you don't install a fan. For fan only 4 M3x12 bolts are needed. Easy installation & printing, no supports.
Mount for BTT TMC5160T Plus. Mount Drivers with 8 M3x12
Needed to mount my drivers and this was the best solution I could come up with.
Din rail mount for BTT 5160 motor driver
Cooling fan mount dock for BTT-5160T Plus step driver BOM axial fans3010 x1 or 4010 x1 two location to install the fan for open install or concealed install as pic some heat nuts 3*4*5/3*5*5 good luck and happy printing again
The totally not overkill driver mount I needed a DIN mounting solution for my four drivers and I might have gone a little bit overboard… Supports both horizontal and vertical mount (100mm +-10mm spacing) utilizing the Voron DIN clip (…
Remix for din912 screws and fused inserts. Inserts m3*4*5 Screws m3*12 Screws m3*8
Remix for MellowTMC 5160T Plus. Inserts m3*4*5 Screws m3*12 Screws m3*8
Because I needed a model of the TMC 5160 Plus stepper driver from Mellow 3D, but couldn't find one, I decided to model it. Enjoy! Link to Mellow's doc for the driver can be found here .
Same as original but used the same trick voron parts use to make the holes printable
This is a Mellow Fly TMC5160TA Mount for my DIN Rail Bracket. You can find the bracket here ! In addition I created a fan mount. The fan mount can be used without the rail mount. The fan mount is for 40mm fans. The printable spacer can be…
Add option to mount across the DIN rail. BOM: 4x M3 8mm button head for modules (socket head also work) 2x M3 8mm socket head for DIN mount 4x M3 12mm socket head for fan bracket 8x M3 14mm socket head for fans
Cut copied mirrored pasted assembled. I dont know how to cad but cut copy paste worked here.
A DIN rail bracket for the Fysetc Spider controller with the possibility of adding a layer for two Fly Mellow 5160 pro stepper driver and fans. Each layer can use either m3 nuts or screws (see photos). No supports needed for printing.…
A quick and simple print for labeling shelves. I needed a fast and cheap print for a label holder for shelves that could also be attached to a majority of wire or keyslot shelving units since I have a variety of the different types. This…
This is a simple mount for two 5160T-Pro drivers from BTT. Can be mounted on a panel or elevated.
I made this to go with https://www.printables.com/@TallBoy_436908 's BTT5160TplusMountVzBot.stl It uses 8xM3 heat inserts. Added a VZBot logo for my VZ330 build. If you would like a plain one let me know. Also made a shroud for just one…
Remixed to fit my Voron 2.4 250 mm with 2x TMC5160T Plus and Manta M8P V2.0 board.
This fan is designed to be used with the fallowing https://www.printables.com/model/660752-btt-skr-3-ez-din-rail-mount you will need M3 Heat set inserts for this print. You will also want to use ASA, ABS or PETG. This was designed with…
You can identify your version of the Stepper Driver by seeing if thedriver has R022 resistors, which is the v2 (the version that BTT should be shipping right now) or R512 resistors, for the v1 of them. Right now its only the holder but…
This is a mount for the Mellow Fly 5160 Pro External Drivers. You can mount 4 of them on this.
A placeable component for the Bumbag Customizable Enclosure System . Find the product here . This model incorporates a modified version of the 3D model published by BIGTREETECH here .
All credit to Phantom16361 for the original design. There was a slight error in the hole placement of the 5160 Plus mounts. The picture with the bracket in blue is the original hole spacing. The one showing the yellow/tan color bracket is…
Simplified reference model for Fly 5160 pro V1.5.
I made/used it so that i could screw the motor drivers onto a wooden board without the solder joints pressing into the wood. It also raised the drivers slightly so that they were protected from moisture on the board The open side should…
Small mounting bracket to cool a tmc 5160 plus Hardware 8 M3x10mm 6010 axial fan Submit feature requests here!
Din Rail Mount For BTT External 5160 Drivers This is a robust, high-performance DIN rail mounting solution specifically designed for BigTreeTech (BTT) External 5160 Drivers (TMC5160T Plus) . Whether you are running a Voron, VzBoT, or a…
Requires 22x Voron style M3 heat inserts. The MOSFET module is used to level-shift the motherboard PWM (for example to control one 12V fan on a 24V printer). I have made a provision for the Z endstop wiring in case someone still uses a Z…
I'm running the XY motors on my Annex Engineering K3 at 48V, and I'm using BTT's external TMC 5160s (TMC5160T Plus) as the stepper drivers. I needed to mount them, and specifically, I needed enough room for an Octopus Pro (mounted…
I've created this model to save space in electronics bay. Use M3 heat set inserts for mounting
MKS Monster8 v2 + 4 Fly HV 5160 mount + 4 4010 fan
I needed a model that would hold all my TMC 5160 drivers individually and have good cooling, so i made one that uses a 4020 noctua fan and 2 DIN rail clips, put heatsinks on the bottom side to increase surface area and im happy with it.…
A simple mount that can be clamped into alumumium profiles to hold the TMC5160T Plus in place. The Holder needs to be screwed and you have to solder heat inserts. After that you need to decide how you want to mount your drives. As you are…
RANE NC FADER PN 15160 Support block replacement. The old ones seem to get brittle and crack, this should be a drop in place repair.
I created a card divider for my MTG collection that has an indent for an Avery 5160 label.
Because I needed a model of the TMC 5160 Plus stepper driver from Mellow 3D, but couldn't find one, I decided to model it. Enjoy! Link to Mellow's doc for the driver can be found here .
Din Rail Mount For BTT External 5160 Drivers This is a robust, high-performance DIN rail mounting solution specifically designed for BigTreeTech (BTT) External 5160 Drivers (TMC5160T Plus) . Whether you are running a Voron, VzBoT, or a…
RANE NC FADER PN 15160 Support block replacement. The old ones seem to get brittle and crack, this should be a drop in place repair.
Knipex 3125160 needle nose pliers needle nose pliers Greifzange. 2x5 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670