Search results: 702

Sort order

141 models

P
PrintablesJakub Lojkásek

SINGER - Second spool pin #68003702

Replacement for Singer - second spool pin holder (vertical auxiliary spool pin) #68003702 . Printed with PLA and I used supports.

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
13
Rating
5
P
PrintablesAntonio

Carpuride W702 better sphere for RAM mount

The stock sphere for the mount is badly made with a flat part (see pic.) that make the grip by the RAM arm worse, causing the device to move around despite the screw being really tight. So redesined the sphere, with now better clearance…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
59
Likes
5
Rating
0
P
PrintablesIrgendeintyp

Emergency Stop for Ender 3 (Siemens Sirius ACT & Wago Winsta 890-702)

This is simple housing for a Siemens Sirius ACT EStop that will fit on 4040 VSlot profiles on the Ender 3 and be secured by the sheet metal control board compartment. The two rectangular cutouts on the back cover are made to fit two WAGO…

Print approx. €7.02–€8.58 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
5
Rating
0
P
PrintablesTomino

Grain Mill Coupler Bosch 00628702

An example 3D printing can be useful also for mechanical parts manufacturing. Maybe someone find this model useful. My original coupler of Grain mill Bosch MUZ5GM1 has broken. It is made of some plastic material. So I decided to design a…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
0
Rating
0
P
PrintablesCarl Slaughter

Carpuride W702 to Quadlock Receiver Adaptor

UPDATE 04-17-2024: I realized that the ram style mount on the back of the device is also used as a heat sink for the CPU inside the unit, so I modified the mount to include openings to allow for air flow around the aluminum mount plate.…

Downloads
650
Likes
28
Rating
5
P
Printablestactical_snacks

Ryobi PCL702 hand vacuum wall mount

A drop-in, hanging style wall mount for the Ryobi PCL702 cordless vac. Can be used with or without the battery installed. It is printed with 75% infill modifier block to reinforce the screw clearance holes.

Downloads
605
Likes
55
Rating
5
P
PrintablesGri

Holder for Carpuride W702 / W502 on a 12mm bracket (e.g. BMW R1250GS)

remove the RAM mount ball by unscrewing the centre screw close the hole by screwing the screw back in or replacing it with a suitable M4 screw remove the 4 screws at the corners of the metal plate press 4 pieces of M3 nuts into the…

Downloads
487
Likes
26
Rating
0
P
PrintablesTwotone74

Fräs-Jig 45° Gehrung Makita RT0702C / Router Jig for 45° miter connection

Deutsch: Die Idee für diesen Fräs-Jig kam mir, als ich dieses Video vom YouToube-Kanal “Gipfelholz” gesehen habe: Da ich keine Tischkreissäge habe, wollte ich das Teil statt dessen einfach drucken. Ich habe das Teil so konstruiert, dass…

Downloads
483
Likes
157
Rating
0
P
PrintablesLyrkan

Rugged case for ZT-703S / ZT-702S Oscilloscope/Multimeter

This is a remix with added inserts of the excellent parametric rugged box that can hold a ZT-703S oscilloscope/multimeter (or a ZT-702S since they share the same dimensions) and some of its accessories. The two grids have to be glued in…

Downloads
434
Likes
84
Rating
5
P
PrintablesTobi Höher

Robomow Wheel right - SPP7021A

Hi, the wheel was created to give the mower "Robomow MC / RS / MS / TS / RC" a better grip and a cool look. ---------------------------------------------------------------------------------------------------------- It was pointed out to…

Downloads
407
Likes
27
Rating
5
P
Printablesthall72

Lego Compatible (3702.dat) Technic Brick 1 x 8 with Holes

This model is compatible with the lego system.

Downloads
367
Likes
22
Rating
4
P
PrintablesWhity

Makita DRT50Z / RT0702 Handles

Remix of the “ Makita wrench grip ” by 3dhobbyist21 . Simple redesign of the original ones to not be round but more oval shaped and using the fuzzy skin option in Prusa Slicer (The 3mf file already contains the fuzzy skin modifier). The…

Downloads
348
Likes
84
Rating
5
P
PrintablesCarl Slaughter

Carpuride W702 Dust Cover

Update: Version 2 added that fits tighter and has better clips to grip the screen better. I printed my copy using ASA filiment on a Bambu Lab P1S. ASA needs 100c printing plate/bed for this area and preferably an enclosed printer to…

Downloads
329
Likes
17
Rating
0
P
PrintablesCarl Slaughter

Carpuride W702 Sun shield

The sun shield for these devices is very shallow, and in direct sunlight from above tends to make it difficult to see the display even at full brightness. Although this design is far from perfect I was able to use Tinkercad to design it.…

Downloads
305
Likes
12
Rating
5
P
PrintablesTobi Höher

Robomow Wheel left - SPP7021A

Hi, the wheel was created to give the mower "Robomow MC / RS / MS / TS / RC" a better grip and a cool look. Replaced the original Robomow wheel SPP7021A. The two extra holes would be for an aditional hubcap. Looks like a tractor tyre with…

Downloads
282
Likes
20
Rating
0
P
PrintablesAlexander Cluck
18+

The source marked this model as adult content.

Downloads
251
Likes
283
Rating
0
P
PrintablesGhostCell

Fox 34 Marzocchi Fork Topcap Socket, 26mm, 398-00-702

A little bigger than 26mm because I had tolerance problems, exact size in the pictures. Hope you find this helpful and save about 30€.

Downloads
240
Likes
14
Rating
5
P
PrintablesFoe

Replica Panasonic BT-S702N CRT Monitor cover

Replica Panasonic BT-S702N CRT Monitor for Jurassic Park Explorer builds. Includes an LCD variant for small flat panel displays as an alternative. It includes Faux buttons to the real thing, (Non-Operable) Hardware Required: 2x 3mmx12mm…

Downloads
202
Likes
37
Rating
5
P
PrintablesChappie

702 715T RS22 Clamshell Stock Model

Clamshell stock for the Mossberg 702 or 715T and Rossi RS22. Currently printing on the weekends will upload photos when done and mod mesh if needed. Elegoo Neptune 4 Base PLA+ 35% infill Supports Normal - Touching build plate

Downloads
189
Likes
16
Rating
0
P
Printablesmbmelectronic

Zoyi ZT-702S

Przydatny stojak na multimetr

Downloads
184
Likes
14
Rating
5
P
PrintablesJBoe

Grinding fixture for Viking Garden Shredder Blade 6008 702 0121

Object description: Grinding fixture for resharpening a Viking Blade 6008 702 0121 and similar garden shredder blades. The fixture fits on all wet grinders with a 12mm rod like from Torrmek, Scheppach, Güde, Einhell, Holzmann, Weldinger…

Downloads
181
Likes
21
Rating
0
P
Printablesthall72

Lego Compatible (702.dat) Brick 4 x 4 Corner

This model is compatible with the lego system.

Downloads
172
Likes
24
Rating
4
P
PrintablesKOSERO

La Pavoni boiler flange / nut / ring Remover (For the 31104702)

A custom tool designed to remove the boiler flange nut/ring on La Pavoni machines (part no. 31104702). Perfect for safe and easy disassembly without damaging components. Printed in PETG (0.4 mm nozzle, 0.3 mm layer height, 5 wall loops,…

Downloads
160
Likes
9
Rating
5
P
PrintablesSchmoxy

AKG K701/K702/K712/AKG K7XX Elastic Bands/Straps Fix

This is a fix for the elastic bands in AKG K701, K702, K712, and AKG K7XX headphones. It's been tested on the K712 Pro and should work for similar models. You'll need an elastic hair tie and glue for installation. If you want to you can…

Downloads
158
Likes
15
Rating
5
P
Printablesbladel

Shimano brake bleed funnel for ST-R8020 ST-R7020

Bleed funnel for newer Shimano brake leveler for use without adapter. Use the original washer. Should fit all M4 brake leveler: Dura Ace ST-R9120 / ST-R9170 Di2 Ultegra ST-R8020 / ST-R8070 Di2 105 ST-R7020 / ST-R7025 Category: Sport &…

Downloads
152
Likes
10
Rating
5
P
Printablesericgus

(Remix) Commodore 1702 monitor door

This is a remix of the "Commodore 1702 monitor door" by SkaBoyTD. I made a number of tweaks and modifications to his original design. I discovered my Commodore 1702 monitor (NTSC) had some subtle differences with the placement and sizing…

Downloads
149
Likes
12
Rating
5
P
PrintablesZdendys

BME280 BMP180 Si7021 sensor cover

Cover for BME280/BMP180/Si7021 sensors, with labels of pinout Category: Electronics

Downloads
137
Likes
4
Rating
5
P
Printablesdankor

ZOTEK ZOY ZT702s SCOPOMETER HOLDER COMPATIBLE WITH BST-050-JP PROBE PLUGS

Przygotowałem model pod mój multimetr kompatybilny z sondami bst 050 jp i ich fabrycznymi zatyczkami. wydruk petg ------- I have prepared a model for my multimeter compatible with bst 050 jp probes and their factory plugs. petg print

Downloads
130
Likes
25
Rating
5
P
PrintablesSeraaron

Replacement Timer Knob for TOWER (Model T17021) Air Fryer

If you like, you can also peel the label off the original knob and stick it onto the replacement, as seen in the photo above

Downloads
130
Likes
2
Rating
0
P
PrintablesJodameister

Carpuride W702 Navi-Adapter for Ducati Multistrada (RAM-Mount)

A navigation mount for a Garmin Zumo 395 was installed on my Ducati Multistrada when I bought it. I wanted to upgrade to the CarPlay solution from Carpuride with W702 and needed an adapter for the 7 inch display. The adapter is designed…

Downloads
129
Likes
9
Rating
0
P
PrintablesDrElectron

Carpuride W702 Bracket for Africa Twin CRF1000L

Best printed in ASA or ABS. Fits perfectly for the CRF1000L. Also needed: x4 M5 Nylock Nuts (DIN985) x4 M5x16 Screws (DIN912) x1 M4x12 Screw with shallow head (DIN7984) 03-Jun-2025: Updated model with a slightly smaller hole for the…

Downloads
126
Likes
3
Rating
5
P
Printablesrh224

Ryobi PCL702 Hand Vacuum Extension

Wanted an extension that tapered down to a narrower opening than the standard crevice tool and also wanted something I could print out of TPU to be able to have some squeeze and give to get into even tighter spaces without worry about…

Downloads
126
Likes
13
Rating
5
P
PrintablesAsh

SmallHD 701 / 702 Cage

This is a quick Model of a cage for the SmallHD 700 series of monitors. I quickly modelled it up and haven't tested it, print with TPU or PETG, supports needed. I'll likely go back to improve the model and add a few more features once I…

Downloads
122
Likes
14
Rating
0
P
PrintablesSorin V

AKG K701, K702 & others earpad rings

This is a simple recreation of the plastic rings on the bottom of the standard earpads used with the AKG 701 (and other compatible ones). It will allow you to test many 3rd party earpads (standard 100 mm ones) and see which one works best…

Downloads
112
Likes
6
Rating
4
P
Printablestowilab

TP-Link WR702N Wallmount

TP-Link WR702N Wallmount in 2 Varianten: M4 Schrauben innen oder außen.

Downloads
107
Likes
13
Rating
5
P
Printables3DMark

Knipex Pliers 7020160 Holder Ikea SkadisTnut

An adapted model to fit the 70 02 160 plier. Printed in 0.3mm with PETG.

Downloads
104
Likes
12
Rating
5
P
PrintablesAsh

SmallHD 702 Screen Cover

Model This is a screen cover for the SmallHD 702 / 701. There are only a handful of 701 / 702 screens left in the world so really the only way to source one is through a donor monitor. Print Settings I would highly recommend printing this…

Downloads
102
Likes
20
Rating
0
P
PrintablesPetr Janatka

CASE ENCLOSURE for XY-7025 DC-DC step down changer converter with XT-60 connectors

Stick the XT-60 holders in a way that you find most suitable for you.

Downloads
100
Likes
13
Rating
0
P
PrintablesSteveW91

Wall holder for Zoyi ZT-702S Multimeter Oscilloscope

A remix of mbmelectronic's model that can be fixed to a wall with screws through the holes

Downloads
97
Likes
8
Rating
5
P
Printablesingegneredentro

RADIAL FAN, 70x70x20mm Delta Model BFB0712H 7020

Radial Fan, 7020 Model, inspired to Delta BFB0712H . Totally editable, published the following elements: Rotor → girante.prt Motor support → corpo_motore.prt Upper Carter → carter_ventola_1_dx.prt / .stl Base Carter →…

Downloads
95
Likes
17
Rating
4
P
Printablescorecode

AKG K701/K702 "cover 3"

AKG K701/K702 replacement "cover 3" part. In case you broke it while repairing your elastics. Replacement for AKG part number 2458Z46060 or 5023314 (see explosion diagram from AKG ). Category: Parts

Downloads
94
Likes
7
Rating
0
P
PrintablesEvilMietzie

Carpuride 702 Pro Mount for 16.2mm (BMW R1200GS) Bar

I bought a BMW R1200GS and a Carpuride 702B Pro Carplay Display. The R1200GS was missing the BMW accessory mount so I could not use that. It also turns out that the Carpuride 702(B) Pro uses the mount for the BMW bracket or alternatively…

Downloads
92
Likes
7
Rating
0
P
PrintablesValentin

Mercedes A2017270287 - W201 W124 - Door Panel Clip - Vapor Barrier

Mercedes Part A 201-727-02-87 This a printable replacement part of the door panel clip for the vapor barrier behind the door panels of various Mercedes models such as the Mercedes W201 (190, 190E) as well as the W124 (E-Class) . Would…

Downloads
91
Likes
12
Rating
0
P
PrintablesPatrick Diebold

Makita Router RT0702C Bottom Plate

Perfectly fitting base plate for the Makita Router RT0702C for your customization in DIY CNC projects or other stuff. I included project source files for Fusion 360 and SketchUp. My printed example is of low quality PLA, high layer…

Downloads
90
Likes
6
Rating
0

7028222YP-v2

This is a part for the Snapper snowblower model # 8246 called a Block 2-8222. This is not a perfect replica but an approximation. I recommend higher infill for strength. The black part photo is of the original part, the other is of my…

Downloads
84
Likes
5
Rating
0
P
PrintablesGlitzville

AKG Headphones Flat Cover Face Replacement - Open/Closed (Q701, K701, K702, K712)

I took apart my K712's to replace the elastic band and discovered how easy it is to take off the small rounded mesh covers. I never liked how they looked -- I always wished they were flat. Now that I have a 3D printer I can fix that…

Downloads
75
Likes
8
Rating
5
P
PrintablesFrindal

Carpuride W702 Mount for BMW R1200RT 12mm bar

This is a remix design for my BMW R1200RT 12mm bar. Printed with eSun ABS+ You will need : 4 screw M3 x 25mm 2 screw M4 x 40mm 1 screw M4 X 30mm 2 locknuts M4

Downloads
74
Likes
3
Rating
0
P
Printableskran159

Ender 3 Pro WEN 10702 Dial Indicator mount

-No supports needed -No additional bolts needed

Downloads
73
Likes
6
Rating
0
Downloads
66
Likes
3
Rating
0
P
PrintablesCrimsonTech

Voron v0 auxiliary fan duct for 7020 blower

A modification to the 7530 aux fan to fit a 7020 blower from a projector that I had lying around.

Downloads
66
Likes
17
Rating
0
P
PrintablesAndy McLaughlin

Ryobi PCL702 hand vacuum wall mount (remixed to include mounting holes)

As tactical_snacks put it: A drop-in, hanging style wall mount for the Ryobi PCL702 cordless vac. Can be used with or without the battery installed.

Downloads
65
Likes
1
Rating
5
P
PrintablesKevin Wong

Dell Ultrasharp Webcam (WB7022) Low Profile 1/4-20 Mount

A simple low profile 1/4-20 magnetic mount for a Dell Ultrasharp Webcam (WB7022). More information available here Category: Office

Downloads
63
Likes
6
Rating
0
P
PrintablesBasementLAB

Honda Side Cover Collar for HONDA Fairings - Collarino Carene Laterali - Honda Part Number 84702KV0670

Honda Side Cover Collar - Africa Twin RD03_RD04 and many other models - Collarino Carene Laterali Honda Part Number 84702KV0670 - 84702-KV0-670 The Collar is used on 9 models from 1990 to 2014: Honda VF750C Honda VT1100C2 HondaVT750C2…

Downloads
60
Likes
4
Rating
0
P
PrintablesFoxVirus

Sagemcom DIW7022 (2024 KPN decoder Set-Top box) wall mount

A wall mount for the Sagemcom DIW7022 set-top box, known as the current (2024) set-top box of a Dutch internet/tv provider knowing: KPN. Holes for the screws are 3mm in diameter, with a 4mm diameter drop to hide to top of the screws. The…

Downloads
59
Likes
0
Rating
0
P
Printablesthree-spot

ZOYI ZT-702S(703S) scope Low Angle Stand

ZOYI ZT-702S(703S) scope Low Angle Stand angle 25 degrees

Downloads
59
Likes
8
Rating
0
P
Printablessonyslyst

Makita rt0702 mount for printnc

This mount fits the new printnc v4. Inner diameter: 65mm Should work with: - makita rt0700 - makita rt0702 Print Settings Printer Brand: Bambu Lab Printer: x1 carbon Supports: No Resolution: 0.2mm Infill: 60%

Downloads
55
Likes
4
Rating
0
P
PrintablesIfrit

TP-Link mini (TL-WR702N) Wall mount bracket

Just a bracket to fix a TP-link mini Wifi AP / nanorouter (model TL-WR702N) on a wall.

Downloads
54
Likes
2
Rating
0
P
PrintablesSascha_LB

Adapter-N40-Makita RT0702CX2

Ich habe in meiern Werkstatt meine Staubsauger alle auf 40 mm HT-Rohr adaptiert. Daduch bin ich maximal flexibel. Also muss auch die Makita an das 40 mm System. Abei der passende Adapter Druck ohne Support; 0,4 mm Nozzle; 0,2 mm…

Downloads
54
Likes
1
Rating
0
P
PrintablesJprints

Router stand for Makita RT0702C and other small routers

You are routing some sweet chamfers and suddenly need to put down your router? Just put it on this simple base! No more balancing your router on its top (if it is even flat and balanceable ;))! The print is super simple and PLA is working…

Downloads
53
Likes
8
Rating
0
P
PrintablesElBartoME

Sony Anode Cap Remover 3-702-436-01

This is the anode cap remover needed for BVMs like the 1910, 1911, 2010 or 2011. It's needed because these models have an additional contact for the convergence voltage in the anode cap itself. Tested and works.

Downloads
53
Likes
4
Rating
0
P
PrintablesJan Smrčka

Adapter holder for Catler ES 702

Simple holder for adapters for capsules and ground coffee of the Catler ES 702 coffee machine. I recommend printing with the back side on the bed, then no supports are needed. 2 perimeters and 5-10% infill are also enough. There is space…

Downloads
51
Likes
4
Rating
0
P
Printablesnixternal

Adafruit Si7021 Sensor Case

Probably not going to be a popular one as I don't see many people using this exact sensor in their projects. I'm actually impressed with the little guy, and for the price, it serves its purpose. Using it to measure the temperature &…

Downloads
47
Likes
7
Rating
0
P
Printables2wenty2wo

Multiboard - Multiconnect Mount for Zoyi ZT-702S / Xeast XE-702S Multimeter Oscilloscope

This will mount a Zoyi ZT-702S or Xeast XE-702S (same product just different branding) to Multiboard using Multiconnect. You will need to print the Multiconnect connectors here:…

Downloads
46
Likes
5
Rating
0
P
PrintablesÁki

Caddy², a Dell OptiPlex 3020 7020 9020 SFF 2.5" drive caddy... caddy.

A caddy for your Dell DELL MZ60045 caddy: a caddy². It fits 3020 7020 9020 SFF PCs, and possibly others. This allows you to repurpose the optical drive slot on your Dell caddy, and mount a 2.5" SATA drive in its place. Drives clip in and…

Downloads
46
Likes
5
Rating
5
P
PrintablesDeep Cycle

XY7025S DC Buck Converter Enclosure (Board + LCD Case)

This enclosure was designed for the XY7025S DC buck converter/power supply module, which I purchased from AliExpress. The module does not include a case, making it awkward and unsafe to use as a bare board, so I designed this custom…

Downloads
45
Likes
6
Rating
0
P
PrintablesmoWerk

W639 Hinweisschild | A6398170220 | Type Sign / Badge / Emblem | Mercedes Benz Viano Vito

Replacement for the Oval Type Sign on your W639 Mercedes Benz. The base model is just blank. Engrave your logo or custom text using the PrusaSlice 3mf. My company logo provided just as demo. Install using double sided tape. Replaces…

Downloads
44
Likes
5
Rating
0
P
Printables3D-aniel

CBR1100XX Carpuride W702 Holder RAM Mount

You need an (OPTIONAL M8 and) M5 Thread drill. You need also (OPTIONAL a M8 30mm screw ,) 4x M5 20mm screws and a 300mm M12 Screw. The M8 Screw is for a better durability.

Downloads
42
Likes
7
Rating
5
P
PrintablesMarek Pokorný

Cyma CM.702 Safety lever (Airsoft)

Safety lever for Cyma CM.M702. This safety may be compatible with other airsoft weapons like Cyma CM.701 etc. But I haven't tested that. I would suggest you print this model with something more robust than PLA but you can try and let…

Downloads
42
Likes
1
Rating
0
P
PrintablesPongio

AKG K702 elastic fix

fix elastic problems by using hair rubber band instead

Downloads
42
Likes
1
Rating
0
P
PrintablesAlex Crow

Makita 3702 round base

Model printed in PETG and later in PETG-CF. For mounting to different bases use m5 nuts, also the same for stock screw, to hold router

Downloads
41
Likes
10
Rating
0
P
Printableskran159
Downloads
40
Likes
6
Rating
0
P
PrintablesProfylr

Dust Collector Coupler - Ryobi Mitre Saw Model TSS702 to Bissel Garage Vac Model 18P0-3

Printed with Galaxy Black PETG Nozzle Temp: 230c Bed Temp: 85c 1st Layer, 90c higher layers PrusaSlicer 0.20mm SPEED settings - 4 perimeters, 15% infill Position - Knurled End Down No Supports

Downloads
39
Likes
4
Rating
0
P
PrintablesTiMake3D

Oberfräsenlift für Makita RT0702C

3D druckbarer Oberfräsenlift für eine Makita RT0702C Oberfräse. Es werden zusätzlich noch folgende Kaufteile Benötigt: 1x M8x50 Senkkopfschraube DIN 7991 1x U-Scheibe D5,5x15 4x Stahl oder Edelstahlstange D10x60mm 6x M4x95mm…

Downloads
38
Likes
8
Rating
0
P
PrintablesJohnnyTK36

Ryobi PCL702 hand vacuum - IKEA Skadis T-Nut Mount

I modified the authors original mount to be used with the IKEA Skadis system. This mount is for a Ryobi PCL702 hand vacuum Parts: (3) M3 x 12mm long SHCS (3) M3 T-Nuts for Skadis by ORM - Found Here Print Settings: Material: PLA

Downloads
37
Likes
4
Rating
0
P
PrintablesSomnus

TS0702H 3pin fan controller box/case

Nozzle: 0.4mm Layer height: 0.2mm Infill: 100% Perimeters: 3 Supports: no TS0702H 3pin 12V fan controller: https://s.click.aliexpress.com/e/_oo5Pu2F You need 4pcs M3x6mm or M3x8mm countersunk screws to fit the lid/top:…

Downloads
33
Likes
3
Rating
4.5
P
PrintablesMNG

CARPURIDE W702 - SUZUKI 800DE

8x šrouby a matky M5 - 30 mm s nízkoprofilovou hlavou (matky upevněny teplotavným lepidlem) 1x šroub M4 30 mm hrazda 11 mm obalena slabě gumovou páskou proti prokluzu

Downloads
32
Likes
8
Rating
0
P
PrintablesCyremann

Ross RS-22 / Mossberg 702 Plinkster Magazine Holder

Print it with the screw holes on the build plate, no supports required. I used ABS, but inside a house any filament should be fine.

Downloads
31
Likes
3
Rating
0
P
PrintablesAlex_Usovich

Ryobi PCL702 vacuum nozzle tall and long

A tall and long tool for the Ryobi PCL702 hand vaccum. This one fits the vaccum perfectly and does not leak like some other tools for this vaccum. I printed in transparent PLA and it has held up great for months of use. If printing in…

Downloads
31
Likes
10
Rating
0
P
PrintablesSyntex97

Makita RT0702 Oberfräsen-Tisch + Schablone

Makita RT0702 Oberfräsen-Tisch + Schablone Beschreibung Dieser Frästisch wurde speziell für die Makita RT0702 Oberfräse entwickelt. Die Befestigung erfolgt über den originalen Halter der Oberfräse mit den 4 Standardschrauben – es werden…

Downloads
28
Likes
3
Rating
0
P
PrintablesAlex_Usovich

Ryobi PCL702 Replacement adapter to 1-1/4"

I wanted a replacement part for Ryobi hand vaccum incase I ever lost it so I painstakenly modeled this part up. It fits the Ryobi PCL702 vaccum and adapts it to be able to use 1-1/4" tools. It is about 1.5" longer than the original as…

Downloads
28
Likes
3
Rating
0
P
PrintablesTarz

Stanley No.702 and 80-702 Portable Vise Jaw

Replacement jaw for Stanley Tools No.702 and 80-702 portable vise. To make opposite side, simply mirror the stl in your slicer. M3 x 6 screws, with a bit of pressure, will self-tap into mounting holes. While I used PETG at 50% infill, any…

Downloads
27
Likes
2
Rating
0
P
PrintablesJoe Bloggs

DEWALT DT70702 40 Piece Impact Screwdriver Bit Storage

I made this because I don't really need the "tough case" and I wanted the bits easily accessible in a draw taking up a little less room. I didn't find anything that held these bits in this way so I just threw something together, it isn't…

Downloads
27
Likes
5
Rating
0
P
PrintablesReverse Retro

Lionel 8702-132 (2055 Hudson) brush plate

I recommend printing this at 0.2mm with 100% infill, using PETG or another strong and heat resistant material. You will have to remove the brush holders/springs from the old assembly and attach them to this new one in order to use it.…

Downloads
26
Likes
3
Rating
0
P
PrintablesRon

Si7021 Sensor Case Remix

It's a remix of https://www.thingiverse.com/thing:2189509 - added a Zip tie place and it has two configurations: mounting option with screws mounting option with 8x3 mm magnet (as the one you use for extruder visualization). both options…

Downloads
26
Likes
3
Rating
0
P
Printablesver2go

PM-SW702 / TYWE2S smart plug jig

Summary: I purchased some iSelector (SM-PM702) smart plugs to try to flash Tasmota firmware on. I tried to come up with a least intrusive way but in the end you still will need to get to GPIO 1 located in a hard to reach place in the…

Downloads
26
Likes
2
Rating
0
P
PrintablesFyrby Additive

SparkFun Humidity and Temperature Sensor Breakout - Si7021

This is a scale, printable model of the SparkFun Humidity and Temperature Sensor Breakout board for the Si7021, which has an I2C interface and costs around $10.95. The product page for this device can be found here . I managed to print…

Downloads
25
Likes
1
Rating
0
P
PrintablesLion

Hanging Holder for Philips Bodygroom BG7025/15

General Information The model has been designed to fit my bathroom cupboard door which has a width of 16mm. I have uploaded a CAD file that you can use to change the width or to remix it. If you need another CAD format let me know. I can…

Downloads
24
Likes
5
Rating
0
P
PrintablesFelipe

22mm template guide for inclusions with Makita RT0702 trimmer + templates + centering cones

The template guide provides a 22mm sleeve through which the trimmer bit passes, allowing use of the trimmer with template patterns. The original Makita template guide has a 10mm sleeve, allowing a perfect match with the 22mm template…

Downloads
23
Likes
5
Rating
0
P
Printablesoptik8

Support Ecran Carpuride W702plus sur CFMoto MT800ES

Voici mon travail pour installer mon écran Carpuride W702plus sur ma CFMoto 800MTES. Il y a les plans Solidworks et le gcode PrusaSlicer pour du PA12 Sunlu, buse HF0.6mm

Downloads
22
Likes
0
Rating
0
P
PrintablesDJManiek

K1/K1C back fan 7025

redukcja do tylnego wentylatora K1/K1C z wiatraka 7025 do standardowego wylotu

Downloads
21
Likes
7
Rating
0
P
Printablesjanek

Extension plate for makita RT0702CX2J

Printed with 50% of gyroid infill, no supports, petg.

Downloads
19
Likes
1
Rating
0
P
Printablestcarnathan

Wen Precision Dial Indicator Holder 10702

UPDATE: Added a newer clip design to allow you to attach it to a printer with belts that sit in front of the X-axis rail (e.g., in a Mercury One setup). This is a separate file. Also adjusted the height of the original bracket to help it…

Downloads
19
Likes
3
Rating
0
P
Printablesonus

Snapper Clutch/Brake Cable Repair - 7022344

I have a snapper model 280812BE (80422) - Snapper 28" Rear-Engine Riding Mower, 8hp I designed this as a drop in replacement part for: Snapper 7022344 CABLE, Brake (Superseded to 7022344YP) The issue is they wanted to charge me ~$40.00 w/…

Downloads
19
Likes
3
Rating
0
P
PrintablesSaul

Cilindro supporto valigie TRK702

Cilindro per supporto valigie Benelli TRK 702, consiglio stampa in ASA o meglio ancora ASA-CF, sconsiglio PLA e non raccomando PETG. Per eventuali migliorie sono a disposizione.

Downloads
18
Likes
0
Rating
0
P
PrintablesCopperLion

Louvred humidity/temperature sensor enclosure for si7021 etc.

Designed to hold small humidity/temp sensor (in my case the si7021) with louvered front to protect them from direct sun etc whilst still allowing air flow. The back is friction fit, use a little glue to secure. I haven't added any holes…

Downloads
18
Likes
4
Rating
0
P
Printablesreefab

TP-link WR702N case

Case for the TP-link WR702N. Category: Computer

Downloads
18
Likes
1
Rating
0
P
PrintablesBerardino

Honeywell Valuair adapter to TentaCat0702 MK2

I was looking for a pair of filter for my mask, an Honeywell Valuair, but now they are too expensive or impossible to find and in a search i found the MK2 design of TentaCat0702 and got the idea of the adapter, bought a 3d printer, drawn…

Downloads
18
Likes
2
Rating
0
P
Printablesjinetix

Dell UltraSharp Webcam WB7022 Privacy Cover

Really liked the magnetic privacy cover that came with the webcam, but didn't like how it didn't allow you to use Windows Hello facial recognition with it on. Designed this cover so that it will only block the camera and leave the other…

Downloads
17
Likes
2
Rating
5
P
PrintablesTom.m

benelli trk 702 dual screen

hello i have made this to fit the originalscreen and on top a 5" carplayscreen it is a work in progress feel free to play around with the file 2 files one with bracket the other one just fits over it i made an aluminium bracket for the…

Downloads
17
Likes
2
Rating
0