Search results: 812

Sort order

294 models

P
Printableswedgeworks

Fruit and Vegetable Washing Basin from Thingiverse # 5685812

NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant

Downloads
3,608
Likes
1,665
Rating
4.67
P
Printablesdon frechdachs

Moon Lamp (LED Strip Mount WS2812B)

Hello there this a remix of the famous Moon Lamp for the use with WS2812B Led Strips and WLED (NodeMCU ESP 8266) to controll the LEDs. Moon Lamp Diameter approx.: 154 mm / 6 in Hole for the screwable LED Strip Mount approx.: 52mm / 2 in…

Downloads
2,640
Likes
498
Rating
5
P
PrintablesFoxPrint3D

Led strip clip/holder (WS2812, other 12mm LED Strips)

This LED strip clip should work for all 12mm width LED strips. I personally used and tested it for a WS2812b and it worked just fine. If you test other types and they work, please let me know in the comment section so i can add them as…

Downloads
639
Likes
64
Rating
5
P
PrintablesMarcus

8x32 LED Matrix Case (WS2812)

This model houses a WS2812 8x32 LED matrix, an ESP32 and the necessary cables. I'm using it as a status display for my PV inverter, the ESP runs Pixelix to display the contents. Most printers are too small to print the three parts in one…

Downloads
614
Likes
110
Rating
5
P
Printablespino1021

Ferrari 812 Superfast Silhouette Wall Art

Ferrari 812 Superfast Wall Art Easy to print . Of course you can scale it the size you want. Easy to print for up to 110cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided…

Downloads
572
Likes
102
Rating
4.67
P
PrintablesINVESTEGATE

LED Matrix WS2812B ESP32 16x16 grid screen picture frame

UPDATE: I also have done a 32x32 Matrix in a IKEA picture frame with WLED: https://www.printables.com/de/model/501107-led-rgb-matrix-ws2812b-esp32-wled-32x32-round-squa…

Downloads
517
Likes
174
Rating
5
P
Printablesjlmeredith

WS2812 LED Solder Jig for round 9mm SMD using 24 AWG Magnet Enamel Wire

This is a jig that can be used when soldering round SMD mounted WS2812 LED using 24 AWG Magnet Enamel Wire I created this jig to assist me in soldering magnet wire to pre-populated WS2812 LED assemblies. The jig will hold the LED in the…

Downloads
513
Likes
108
Rating
5
P
PrintablesSkittz74

38120 LiFePO4 Battery Cell Holder with Case

This is my custom design for battery holders for 38120 LiFePO4 Battery cells.These parts can be used to make any arrangement of 38120 Cells in any series or parallel configuration! For my specific project, I made a 4S 8000 mAh battery…

Downloads
501
Likes
29
Rating
5
P
PrintablesSabu8

Ferrari 812 Superfast Silhouette Wall Art

This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…

Downloads
469
Likes
118
Rating
5
P
Printablessixi

LED Matrix 16x16 - ESP8266 / Arduino - NeoPixel / WS2812b

A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels Easy to print: Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the…

Downloads
438
Likes
86
Rating
5
P
PrintablesINVESTEGATE

LED RGB Matrix WS2812B ESP32 WLED 32x32 round square grid screen IKEA picture frame diffusor sound active

Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…

Downloads
432
Likes
146
Rating
4.67
P
PrintablesRegis

Pixel Art with 64 LED Matrix WS2812B

I found a great tutorial for electronics that was missing only the case. So I started modeling. Many thanks to Crazymakers for their work and sharing. Link to the video : Link to the website :…

Downloads
419
Likes
148
Rating
5
P
PrintablesBuzz

Yet another LED digital clock with WS2812B-LEDs...

I needed a simple clock in one room, so I designed one. 24h display to be equipped with WS2812B LED-Strips with 60LEDs/m. Each digit will need 15 LEDs, two on each segment with one LED hidden between to segments. I did a lazy wiring job,…

Downloads
416
Likes
260
Rating
5
P
Printablestodbot

Cube of Rainbow Torment: LED Cube w/ cheap WS2812 / Neopixel panels

Here's how to build a simple RGB LED cube using cheap 8x8 WS2812 / Neopixel LED panels. The design is a single 3D printable piece, printed four times, that screws to the panels and forms a frame to hold them in place. Parts Needed: 4 x…

Downloads
402
Likes
114
Rating
5
P
Printablesthall72
Downloads
357
Likes
46
Rating
0
P
PrintablesSteakk

Two Sided WS2812 LED Solder Jig for round 9mm SMD

I made wire channels a little wider to accommodate thicker wires (24 / 26 AWG). I also removed part of the edges surrounding the LED so that it is easier to rotate the LED around to position it just right. Removing that material also…

Downloads
343
Likes
41
Rating
5
P
Printablesjoanvdp

LED diffuser grid for ws2812b strips display

LED diffuser grid for ws2812b strips (60 leds/meter) display. I would recommend to print it 0.2 layer height, print the 3 first layers with white PLA then change filament to black. Pictures are from 4 8x8 grid glued together for a 256…

Downloads
333
Likes
62
Rating
5
P
PrintablesPrinty

ws2812b led rgb matrix

Print it laying down. put the leds in the slots and wire it up. diffuse it from the front side

Downloads
328
Likes
26
Rating
0
P
Printablesgomaed

AWTRIX 2 - 4x WS2812 8x8 LED Panel Fully Printable

Hi, so I had some of these 8x8 LED Matrix panels laying around here and wanted to do something with it. I found the awesome matrix project from blueforcer which is open source. I wanted to use these 8x8 panels from CJMCU. Due to the…

Downloads
327
Likes
67
Rating
5
P
PrintablesMeganoodle

led channel for ws2812b led strip

Two methods for fixing the channel , holes along the center, and tabs on the side, these are 190mm long. I printed these in PLA, flat on the bed with supports everywhere, might get away without supports I didnt try. The led strip I used…

Downloads
320
Likes
45
Rating
0
P
PrintablesHorror-

1812 US Naval Cutlas

US Navy Cutlass, as wielded during the war of 1812. https://www.history.navy.mil/research/library/online-reading-room/title-list-alphabetically/u/uniforms-usnavy/swords.html…

Downloads
277
Likes
27
Rating
0
P
PrintablesEl Chinn

LEGO Technic Liftarm 1x7 (6278125)

my son lost this part while building some cool original lego technic monstertruck (thanks to the LEGO company), and i was irritated not to find it somewhere here. luckily 2 were used in the model, so i started to reengineer it . the angel…

Downloads
269
Likes
25
Rating
4
P
PrintablesJiri Dobry

seven segment LED clock (ESP8266 + WS2812b)

Just another seven segment LED clock. Current version of SW working, but it isn't final version. What is working: time on dislpay synchronization from NTP server time in local time zone. This zone must be specified manually on source code…

Downloads
268
Likes
132
Rating
5
P
Printables3Z3D

Neopixel (WS2812b) Stick / Bar 8 - Generic 8 x Neopixel Stick / Bar - Case - WS2812b-8

Remix (resize) case for Generic 8 x Neopixel (WS2812b) Stick / Bar - Case - WS2812b-8 Support me at: Buy Me A Coffee Original model did not fit these generic Neopixel 8 Bar / Sticks I found on aliexpress, had to resize. Aliexpress Amazon

Downloads
261
Likes
20
Rating
5
P
PrintablesShogo Warrior

16x16 WS2812B Neopixel RGB Matrix Case with diffuser

RGB matrix case Diffuser (print in place with color change) Case stand Back frame to fit esp32 dev boards, mini bread boards, etc Printing Instructions Please use white filament for diffuser. The case & stand can be printed from any color…

Downloads
255
Likes
36
Rating
0
P
PrintablesAlexander

wordclock ws2812b

Wordclock Matrix 11x11 Frame for WS2812B LEDs. LEDs can be simply clipped into the frame. For the Wordclock Frame i use a IKEA Ribba 23x23cm Frame https://www.ikea.com/at/de/p/ribba-rahmen-schwarz-40378401/ Source Code for this project…

Downloads
247
Likes
23
Rating
0
P
PrintablesHackinistrator

ATV / motorcycle battery using 38120 headway cells

custom LiFePO4 battery based on headway 38120 HP cells .Cells are 8AH with 200A discharge rating .Be extra careful while handling those cells . I got the cells and bus bars from batteryhookup.com . nominal cell voltage is 3.2V , 4 cells…

Downloads
231
Likes
51
Rating
0
P
Printableszcohen

2020 WS2812b Neopixel Holder

This is a simple mount for 10mm wide WS2812b (often known as neopixels) to mount along 2020 extrusion. It mounts the LEDs in parallel to the extrusion profile used. 100mm and 150mm lengths provided, as well as a .STEP and Fusion 360 file…

Downloads
205
Likes
22
Rating
3
P
Printableszuberio

12x5 WS2812 LED Array Cylinder Lamp Using Vase Mode Printing

Pictures are of V1 STL files. I've printed but still need to solder the V2 STLs based lamp. V2 lamp uses 5-12 LED strips placed horizontally on the lamp - significantly reduces the amount of soldering! As well, the button has been moved…

Downloads
199
Likes
56
Rating
0
P
PrintablesManifold3D

Ferrari 812 Superfast with print in place moving wheels

I remixed the Superfast model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…

Downloads
192
Likes
27
Rating
4.75

Milwaukee Battery Charger Stand/Mount 48-59-1812

Version 2.0 now ready for download. The charging unit now snaps in preventing the unit from falling out. This is a Makita Battery Charging Stand that tilts the charger at a more user friendly angle. It was designed for the 48-59-1812…

Downloads
191
Likes
27
Rating
3

LED diffuser Matrix 8х8 WS2812 Sim racing car spotter and flags

LED diffuser Matrix 8х8 WS2812 Simple printing from the table upside down. Nozzle 0.5 layer height 0.2

Downloads
187
Likes
34
Rating
5
P
PrintablesSMA GTO

Siboor LED Daylight Disco on a Stick mount or WS2812B 74 IP30 LED strip.

I have downloaded this file, and it did not fit the Siboor led lights I had purchased, Since I printed them on ABS, as it shrinks by around .5% on this long piece it was 2mm too short, so it was remixed with those tolances in mind, and…

Downloads
187
Likes
28
Rating
5
P
Printablesr0st

WS2812b digital pixel clock ESP8266 (ESPHome based)

The clock is based on WS22812b addressable LED strip and WEMOS-D1 mini (ESP-12F) board. In my case it is running the ESPHome software in combination with Home Assistant (see link below). Fusion 360 files are also available. To get result…

Downloads
186
Likes
73
Rating
0
P
PrintablesJosé Pedro

Ferrari 812 Superfast - Italian Supercar Replica

Embrace the pinnacle of Italian automotive performance with this 3D printable STL model of the Ferrari 812 Superfast. This exquisite supercar replica is perfect for automotive enthusiasts seeking to display the breathtaking design and…

Downloads
183
Likes
19
Rating
0
P
PrintablesNERDCORNER

Connector 3PIN Ws2812b SK6812 12mm Dupont

3d printed Connector for jumper wire 12mm Dupont as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…

Downloads
180
Likes
41
Rating
5
P
PrintablesEric U.

Floatboxx LED Holder (SK6812)

The LED holder on the floatbox site does not fit sk6812 LED strips, which was my preferred choice of strip for this build. SK6812 has excellent output since it has a dedicated white channel. I've altered the interior slot to accommodate…

Downloads
177
Likes
18
Rating
0
P
PrintablesJack

8-bit WS2812 LED diffuser

separated diffuser for 8-bit stripe with 5050RGB chips

Downloads
171
Likes
34
Rating
5
P
PrintablesCrashDown77

Holder for 24 x NeoPixel LED Ring WS28128B

The simpliest LCD Neopixel wheel holder there is. Used for Neopixel LED ring WS28128B

Downloads
163
Likes
24
Rating
0
P
Printables3D Crafters

Awtrix 3 Case for WS2812 64 bit

An Awtrix 3 case for a WS2812 64-bit LED matrix is typically designed to house and protect the components of an Awtrix s

Downloads
163
Likes
26
Rating
0
P
PrintablesLevanter

WS2812B LED Connector

I have been having a hard time soldering the LED with the jumps due to many movements that make me solder my hand with the table. None of the solutions that I found were proper to my case, I wanted something straight forward that holds…

Downloads
161
Likes
33
Rating
0
P
Printablesplanetar

Diffusor and cover for 16x16 WS2812b LED matrix

The first version published here is a rather minimal case with a surprisingly effective diffusor for one of those quadratic LED matrices you can get on Aliexpress with 256 WS2812b LED on it, 16 rows a 16 lights, spaced in a 10mm raster. A…

Downloads
152
Likes
8
Rating
0
P
Printablesmtczekajlo

Raspberry Pico USB-C WS2812 Case

Raspberry Pico USB-C WS2812 clone snap-fit case. OnShape: https://cad.onshape.com/documents/cf6759dd1f144a7bfcea9e13

Downloads
150
Likes
9
Rating
0
P
PrintablesStefan

Arcade Button NeoPixel (WS2811, WS2812B, SK6812) RGB LED Mod

This replaces the LED and switch mount for MAME KOF American Type Push buttons. Video example: https://youtu.be/QJ1OX\_ZHtn8 Buttons: https://www.aliexpress.com/item/33001974422.html LEDs: https://www.aliexpress.com/item/32960205936.html…

Downloads
147
Likes
30
Rating
0
P
Printablesmm0070

8x8 WS2812B Gear/Flag Display

I had a bunch of WS2812B modules lying around so I decided to make this gear/flag display. If you don't have any of these modules you're probably better off ordering a 8x8 matrix and using that instead as there's less soldering to do, but…

Downloads
147
Likes
9
Rating
0
P
PrintablesKwas Kwaśny

WS2812B ledstrip solderless clip

It 's a remix with wider socket for WS2812B led strip. All parts and dimensions are the same like in original project.

Downloads
146
Likes
17
Rating
0
P
PrintablesOndrashek

AWTRIX 8x32 WS2812B flex LED with ESP32

I used 2 pieces diffuser from old LCD monitor. Cut to 321x81mm. You will need diffuser frame (without screen) from original project. I made mounting bracket to fasten matrix led down and also used as mounting hole for back cover. Two…

Downloads
140
Likes
20
Rating
0
P
PrintableshextremeLogic

Sleek Enclosure for 8x32 WS2812 RGB LED Flex Display Matrix with USB C Power

Showcase your custom pixel art, scrolling text, and dynamic animations with this sleek and versatile enclosure, designed specifically for a flexible 8x32 WS2812 RGB LED Matrix. This case provides a sleek and professional look and durable…

Downloads
139
Likes
25
Rating
0
P
PrintablesCarguy47

BMW Trim Clip OEM 51498123832

I needed a few trim clips for my E30 and didn't want to order them. Prints well in PETG or stronger material. Also, print sideways for strength and add support material

Downloads
139
Likes
17
Rating
0
P
PrintablesPositronixXx

Spacer for Gaggia Grinder RI8123/01 MD15

A spacer for Gaggia Grinder RI8123/01 MD15 This is a spacer u can easily put in the top part of the grinder between the plastic and the metal cylinder. just unscrew the two little screws that keep the two parts together and place it in…

Downloads
126
Likes
5
Rating
5
P
Printablesvelotinker

Geodesic LED Sphere Ws2812 illuminated Sphere with Ping Pong Balls

Printed for Ping Pong Balls and Gardena Microdrip may be any other 3/16" or 4.6mm tube. You need 92 LEDS and PingPong Balls for hole sphere. 12 Parts 5 Arms with 16,5mm Gardena Tube Slices and 80 Parts 6 Arms with 27.5mm Tubes. You can…

Downloads
124
Likes
63
Rating
4.67
P
PrintablesP3nguinmd

WS2812B LED Rings

This is a collection of WS2812B LED rings that I modeled in Fusion 360. If they can be of use in your modeling or just need a stand in before your LED rings come in the mail, here's the STL files I created for my project. Hope it helps…

Downloads
123
Likes
17
Rating
0
P
PrintablesFabian

Ambilight for any pc monitor tutorial (prismatik, arduino nano, ws2812b)

The housing with lid is part of the Ambilight Monitor project. The case was printed with PLA. The following components are also required for the Ambilight: Arduino Nano Power supply 5V 2A ws2812b 88 LEDs (32 Top, 19 Left, 19 Right, 18…

Downloads
121
Likes
97
Rating
5
P
Printablesdekugo69

RTL8125B Baffle for Lenovo M920Q

Adjusted with PrusaSlicer, so it may not be pretty, but it just works. -You may need to hold the right side down as you screw in to prevent the print from twisting. -The right screw threads into the print. Refrain from over threading.…

Downloads
119
Likes
18
Rating
5
P
PrintablesUusernaame

6812 (60×78×10 mm) 3D-Printable Bearing – Uses 6 mm Airsoft BBs

his is a fully 3D-printable 6812 deep groove ball bearing designed to use 6 mm airsoft BBs as the rolling elements. It’s meant for light-duty applications, experiments, or just as a fun demo of how bearings work. I’ve tested it in PLA,…

Downloads
118
Likes
10
Rating
0
P
Printablesthall72

Lego Compatible (812.dat) Train Level Crossing Centre Rail Cap Insert

This model is compatible with the lego system.

Downloads
118
Likes
16
Rating
0
P
PrintablesPHew

HP Mini Flex IO V2 mount plate for M.2 a/e RTL8125B 2.5Gbit Network Adapter

This is an original adapter plate to allow mounting an Ali-Express 2.5Gbit RTL8125b adpater to the HP Mini's FlexIO V2 slot Designed it to mount the socket upside down so it better aligns to the slot at the rear of the HP mini. Also have…

Downloads
116
Likes
12
Rating
5
P
PrintablesBoda

WS2812B 7 segment display

7-Segment frame and transparant segments. Size 27 x 47 mm. WS2812B LED display behind the segments needs only one control wire for 28 segments. Arduino : Segment arranged a-g clockwise. Adafruit library. byte…

Downloads
115
Likes
13
Rating
0
P
PrintablesRegis

Pixel Art with 64 LED Matrix WS2812B - v2 - New led diffuser

I wanted to replace the tracing paper diffuser with a 3D printing diffuser.

Downloads
115
Likes
27
Rating
0
P
PrintablesSchorschMaster

10mm LED strip clip (WS2812B)

Simple and quick print (32min for 12 pieces with a 0.4mm nozzle) to hold WS2812B strips or any other LED strip with 10mm x 0.4mm size. The slot has a depth of 0.5mm, so please take care of elephant foots. I printend them in PETG Jet Black…

Downloads
114
Likes
19
Rating
0
P
PrintablesNilsR

Modular WS2812 Neopixel stack light andon

Modular design approach to a stackable andon light using commonly available flexible WS2812 (or similar) LED strips. LED spacing is 16 mm. Great as a status indicator for machines, though not necessarily for industrial purposes. Module…

Downloads
114
Likes
37
Rating
5
P
Printables-

Theo Klein 6812 Bosch Staubsauger Vaacum Battery Cover

A battery cover for the Bosch Theo Klein Kids Vaacum. When your kid drops the toy the battery cover can break easily. We have two of these and the cover is broken on both.. but this print is much stronger than the original.

Downloads
113
Likes
5
Rating
5
P
PrintablesKen226

Voron 2.4 300mm Chamber Light WS2812B Neopixel 10mm

This is a chamber light mount for the Voron 2.4, 300mm. It uses standard 10mm wide, 3mm thick WS2812B type neopixel lights. Each section is 6-3/8" long (161.9mm), and is attached using two m3x8mm socket head cap screws and two m3 t slot…

Downloads
111
Likes
21
Rating
0
P
Printablespcky

Arcade Button Box for ESP8266, ESP32, Arduino & Co (incl. WS2812b)

A quick project to build a home automation remote control for kids. My plan is to program the included ESP8266 for sending button triggered MQTT messages to a home assistant server over WIFI. This ESPHome code is a good starting point for…

Downloads
107
Likes
35
Rating
0
P
PrintablesSvenson

BMW Cable Holder 33181181218

This cable holder replaces the BMW OEM clip 33 18 1 181 218 (33181181218). It routes and secures wiring on the suspension—typically the brake pad wear sensor at the rear, and in some models also ABS/signal wires—so cables don’t chafe or…

Downloads
106
Likes
15
Rating
0
P
PrintableselSomero Blanko

Runde Neopixel Uhr (WS2812B)

runde Neopixel Uhr https://youtu.be/7\_WXX9sdJPA benötigte Druckteile (schwarz oder andere "nicht transparent") 4x Oberteil 4x unterteil 1x Aufhänger 12 Uhr 1x Stützer 6 Uhr 2x Stützer 3+9 Uhr 1x Halteklappe (klar / transparent) 12x…

Downloads
106
Likes
40
Rating
0
P
PrintablesRiley Entropy

WS2812 144 LED/M

Highly detailed. 1 meter consisting of individual LED segments. Can be combined to the length needed

Downloads
106
Likes
3
Rating
0

Silhouette ferrari 812

Ce model est une silhouette de ferrrari 812 superfast de 26 cm long ,6 cm de largeur et de 3mm d'epaisseur

Downloads
105
Likes
19
Rating
5
P
Printableskrisztian96

FloWLED moodlight with WS2812B, adressable LED, WLED ESP32

IT IS STILL A WORK IN PROGESSS, it works, but i wish to add more improvements. I will continue as soon i will have time, i have just moved home after 3 years, there are more important things to get done around the house. Plus new…

Downloads
103
Likes
42
Rating
4
P
PrintablesJan Griffioen

Housing for a 60-LED 2812 clock including Arduino Nano V3

Make this from any kind of filamant as long as it is white and lets the light shine through.. You need to buy the pre-mounted LEDS in a ring from ebay or any Chinese supplier, program an Arduinop nano and get a clock module attached to…

Downloads
100
Likes
18
Rating
0
P
PrintablesSzymonRychter
Downloads
99
Likes
17
Rating
0
P
PrintablesSpiegl Philipp

WS2812B, 3 PIN, Connector, LED Strip Stecker

Lötstellen Sicherung, für einen WS2812B Pixel LED Streifen, 3 Pin, 10mm Breit (innen) 12,6mm Gesamtbreite 4 mm Hoch 17mm Lang

Downloads
98
Likes
22
Rating
0

Clip-On WS2812 NeoPixel 16-Led Diffuser

This is an update to the simple diffuser to clip onto a CJMCU-2812B-16 Pixel WS2812 led ring. I increased the outer radius so the 0.9 mm outer shell fits over the ring. With my print settings it fits nicely and doesn't need any glue. I…

Downloads
97
Likes
15
Rating
5
P
PrintablesRNLDNKP

Halloween Pumpkin (Jack 'O Lantern) - Wifi controllable - ESP8266 / WS2812 led ring

Based on the incredible nice looking Jack O Lantern I remixed a version that changes the 3 original LED's for a fully wifi controllable battery powered version with WS2812 LED's. The led's change brightness/are flickering like a candle…

Downloads
95
Likes
19
Rating
0
P
Printablesyahbluez

tea light cover series 230812

TL;DR Translucent Vase mode printable tea light covers for LED tea lights. Green? The LED tea lights i used have a yellow light, the prints are mostly blue, that ends up in green Collection Let there be light Motivation Saw some problems…

Downloads
93
Likes
25
Rating
0
P
Printablesphotobix

Verical Light Bar, based on WS2812b LED / ESP8266 / WLED

I have already seen such a lamp a few times and thought it was great. I still had a aluminium profile, a WS2812 / LED strip and the power supply, so I designed myself a base and assembled everything. The "intelligence" is based on a…

Downloads
92
Likes
41
Rating
0
P

Ferrari 812 Superfast Wallart Model

Model has two options: with spoiler and without.

Downloads
92
Likes
15
Rating
5
P
PrintablesM.M.B.

German Word Clock 8x8 WS2812/5050 ESP32

A 8x8 LED matrix as a printed LED word clock. Print the first layer or two layers of the top with transparent or translucent white, you could also add some layers of an another color, if you want a coloured appearance. The rest of the top…

Downloads
91
Likes
6
Rating
0
P
PrintablesPepkilz

8x24 Matrix WS2812B

Exactly the same, just modified to hold 2 more matrix screens for a total of 8x24 matrix grid. Use with iFlag as Simhub doesn't support multiple matrix's paired together. WLED also works really well with this.

Downloads
90
Likes
8
Rating
0
P
Printablesjg

16x16 WS2812B LED Matrix Project Box

Print the first 2 layers with a translucent material and the rest whatever you desire. You could print the entire thing in a translucent material as well. I used a PLA/Wood Fiber blend. This was designed to diffuse the LEDs in a 16x16…

Downloads
88
Likes
12
Rating
0
P
Printablesrevoke19

Крепления фар Audi A4 B7 8E0998122B

Крепления фар Audi A4 B7 8E0998122B

Downloads
87
Likes
6
Rating
0
P
PrintablesTom_Neverwinter

8x8-led-case-for-flags-gears-ws2812b 8125

reduced size of original for smaller led matrix

Downloads
87
Likes
3
Rating
0
P
PrintablesFeroc

WS2812b LED ring base

This is part of a bigger project, probably will add the other parts bit by bit.

Downloads
86
Likes
17
Rating
0
P
Printablesmarigu

Pixel Matrix WS2812

I have seen some 16x16 WS2812 pixel matrix on Aliexpress.com and coul not resist to buy it and make something with it. So here is my creation, 16x16 WS2812 LED matrix panel. I have created some stand for that as well but i think it could…

Downloads
86
Likes
33
Rating
0
P
PrintablesJason Coon

Fibonacci256 Case with Paper or 3mm Acrylic Diffuser - 166mm disc with 256 WS2812B RGB LEDs and Wi-Fi

Fibonacci256 is a beautiful 166mm circular disc with 256 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy from Evil Genius Labs:…

Downloads
85
Likes
34
Rating
0
P
PrintablesMarius

ESP-01 ESP-01S WS2812 RGB LED Controller Module Case

A small case for the ESP-01S WS2812 RGB LED Controller Module . All hail the Aircoookie !

Downloads
83
Likes
10
Rating
0
P
PrintablesTechNick

Remix for LED Strip Mount WS2812B

holds one D1 Mini V3 NodeMCU ESP8266EX

Downloads
81
Likes
20
Rating
0
P
PrintablesFozzey

W2812 LED soldering Jig

Soldering led strips can be a pain. this jig allows a stable surface to work from. Designed to support 12mm wide LED strips, I think it could easily support the smaller strips without redesign.

Downloads
81
Likes
19
Rating
5
P
PrintablesCain

Red Alert Prism Tower Lamp - WS2812, Wemos D1 Mini, Button Remix

The moment I saw the Prism Tower I knew I had to remix it ! This version is made for up to two buttons, 6x WS2812 and a Wemos D1 Mini. A wiring diagram and maybe some sketches will follow soon. Category: 3D Printing

Downloads
80
Likes
26
Rating
0

WS2812 RGB LED Ring mount

Here is a holder for a WS2812 LED ring (12 LED). Optionally, a bracket for the holder for an Ikea Lack table is also included. The whole thing fits perfectly with the Octoprint LED status plugin. The screw holes are optional and…

Downloads
80
Likes
18
Rating
0
P
PrintablesGreenPanda

WS2812 + ESP8266 Node MCU 16x16 matrix

Сетка для адресных диодов 16х16 с подключением к ESP8266 Node MCU Category: Electronics

Downloads
79
Likes
8
Rating
0
P
Printableszuberio

WS2812B RGB LEDs 12x5 Array Touch Lamp

This is my design for a 91mm tall by 84mm diameter hexagon patterned WS2812B RGB LED array, touch controlled, lamp. The LED array is 5 horizontal strips of 12 WS2812B RGB LEDs at 60 LEDs/m. I've used vase mode printing on the outer shell…

Downloads
78
Likes
20
Rating
0
P
Printablesvakolupaev

BL-M8812EU2 cooller case

BL-M8812EU2 cooller case; radiator: aluminum 35x35x10mm cooler: 30x30x10mm 12v with txpower 45 it heats to 42 degrees

Downloads
77
Likes
4
Rating
0
P
Printablesmaketvee

WS2812B 10001000 LED Coaster/Deco

WS2812B 10001000 You are heavily addicted to addressable LEDs? Then this is the right coaster for you. Or use it as a deco object on your workbench. The package is 10001000, so 20 times larger than the original 5050 WS2812B. Equipped with…

Downloads
77
Likes
46
Rating
5
P
Printablesphotobix

Sapphire Pro - LED Strip Holder for WS2812b

A simple design for a mount for WS2812b (neopixel) LED strip for the Sapphire Pro. The holders are mounted on the left and right side ot the printer, via T-slots (M3), at the height of the motors. The beam angle is 22.5°. 2 parts per…

Downloads
74
Likes
17
Rating
0
P
PrintablesJim.Lee

esp01s ws2812 wireless led ring enclosure

Parts used: 1x ws2812 led ring with 24 units 1x esp01s 1x ws2812 esp01s to ws2812 adaptor unit Firmware: ESPHOME Configure the led ring with neopixelbus Here is an example that works:(Only the light section of esphome configuration file)…

Downloads
72
Likes
26
Rating
0
P
Printablesreemo3dp

Sovol SV06 Gantry WS2812B LED Mount

Gantry mount that adds a WS2812B LED to the gantry of the Sovol SV06 using the screws used to mount the hotend to the gantry. Printing Layer height should be fine (≤ 0.2mm) to properly trap the LED, but otherwise prints fine with a 0.6mm…

Downloads
70
Likes
22
Rating
0
P
PrintablesSharpener

Wandhalterung/Dock für/for fazua Ladegerät/Charger Model STC-8127LC-F

Einfaches Modell, aufrecht ohne Stützen zu drucken. Links Halter für Eurostecker, rechts Halterung für Ladestecker, vorne für Kabel. PLA ist normalerweise ausreichend. Simple model to print upright without supports. Left holder for Euro…

Downloads
67
Likes
9
Rating
0
P
PrintablesRohja

7 Segments Clock Frame for WS2812B leds and external MCU (Arduino, ESP, etc)

I adapted the models made by Sergio Morales to match my need. I didn't want to have to use an ESP8266 (I wanted to use an external ESP32 running ESPHome). I added holes for easier wiring through the back of the digits instead of running…

Downloads
66
Likes
8
Rating
0