Search results: 85

Sort order

1,942 models

P
Printableswedgeworks

Fruit and Vegetable Washing Basin from Thingiverse # 5685812

NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…

Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant

Downloads
3,608
Likes
1,665
Rating
4.67
P
Printablesmaxmar

Adjustment Jig for DeWalt DWE 7492 and DWE 7485 Table Saw

This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
797
Likes
122
Rating
5
P
PrintablesMarin

Flashlight adapter 3xAAA to 18650 & 18500

This adapter is for flash light pewered with 3 pcs of AAA batteries. These torches are cheap and quite common, but problematic and not economical to power. You need three batteries, but they sels in packs of four. If you replace primary…

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
475
Likes
81
Rating
4.67
P
PrintablesJori

DeLonghi 51mm portafilter holder for e.g. EC685

There are already several models out there; Didn't find one with perfect fit for my DeLonghi model which didn't take forever to print. => On to CAD and made my own. Model number of espresso machine in headline to identify if it fits for…

Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
431
Likes
52
Rating
5
P
Printablester

Dewalt Table Saw DWE 7485 to 2 1/2" Hose Elbow

An 90 degree adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Please note that the print time could be reduced by manually optimizing the print supports (in…

Print approx. €10.92–€13.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
306
Likes
51
Rating
5
P
PrintablesNick

Aeroponics Pot 210H - 185D

Aeroponics is a relatively unexplored grow method that has the potential to solve a lot of the worlds issues. This design is for people who want to “supercharge” their growing while using up to 90% less water compared to conventional…

Print approx. €66.49–€81.27 excl. taxPreliminary estimate for one variant

Downloads
262
Likes
74
Rating
0
P
PrintablesBurt Simpson

Reinforced Jar Opener 85 mm

Using jblake's dimensions of his reinforced opener, I redrew it in Fusion 360 so I more quickly scale to different sizes while keeping the thickness at 14mm and the “catch tabs” at 2mm. This is the 85 mm model in the collection. Printing…

Print approx. €5.11–€6.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
249
Likes
14
Rating
5
P
PrintablesAndr34

Dewalt Table Saw (7485 / 7492) Curved Adapter to 40mm Hose

This adapter is curved so you can use inside a wood table and use a vacuum with 40mm hose. Curved prints are hard to print without support so I added also gcode with tree support as I have printed it. You can move printed part also when…

Print approx. €3.78–€4.61 excl. taxPreliminary estimate for one variant

Downloads
210
Likes
23
Rating
0
P
PrintablesJim

Rainwatercollector / Regensammler Ø 85mm

Ich habe das Modell mit PETG gedruckt, da es draußen verwendet werden soll. das ist besonders bei dem Filter nützlich, da man sich das Fäden ziehen zu nutze machen kann um eine feinere Filterung zu erreichen. Das Modell ist aus 3 teilen…

Print approx. €1.74–€2.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
196
Likes
36
Rating
0
P

Behringer XM8500 Shock Mount

This is a shock mount for the Behringer XM8500 dynamic microphone. It's designed for use with the stand adapter included with the XM8500. It works great to isolate the mic from stand and desk vibrations - it really helps with stand…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
179
Likes
24
Rating
4.5
P
PrintablesSuper7

Dewalt 7485 Table Saw Vacuum Adaptor for Ryobi Shop Vac

Dewalt 7485 Table Saw Vacuum Adaptor for Ryobi Shop Vac

Print approx. €4.26–€5.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
171
Likes
24
Rating
0

85mm Bottle Holder for 3x3 5/8" Power Rack

Bottle holder for 3x3" power racks with 5/8" pins. Designed to hold an 85mm 1L CamelBak insulated Eddy+. Must be printed with some kind of support for the pin. I used the Tree support in Cura, but others should work as long as the pin is…

Print approx. €12.19–€14.90 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
13
Rating
0
P
Printablester

Dewalt Table Saw DWE7485 to 2 1/2" Hose Adapter

An adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Both ends have a slight taper.

Print approx. €3.96–€4.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
135
Likes
20
Rating
0
P
PrintablesPeter Farell

Antoni Pleszowski "Over a grave" (1859–1889)

Antoni Pleszowski "Over a grave" (1859–1889) This woman, her hair covered and a melancholic expression on her face, appears lost in thought, perhaps mourning a loved one. The pose, reminiscent of Michelangelo and later Baroque Roman…

Print approx. €5.25–€6.42 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
23
Rating
0
P
PrintablesJC

Havis console mounting Motorola APX-8500 Mobile Remote Head Mount (Dodge Durango Pursuit)

Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…

Print approx. €6.32–€7.73 excl. taxPreliminary estimate for one variant

Downloads
113
Likes
12
Rating
5
P
PrintablesNuisance

Stanley STHT070885 Multibit Screwdriver hex bit holder for SKÅDIS

Adding to the skadis-system by Petri Damstén - this is a hexbit holder for the Stanley STHT070885 Multibit Screwdriver and nut setter. The hooks were created by Petri - which are required to attach the Stanley hexbit set to the skadis…

Print approx. €3.82–€4.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
107
Likes
19
Rating
5
P
Printables321POP

Large pentacle tealight holder (5-piece 385mm)

A large pentacle to hold 5x standard battery-powered tealights. Assemble from 5 identical parts which link together to form the complete shape; which may be easily dismantled again for storage. Please note that they do not lock strongly…

Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
56
Rating
0
P
PrintablesEpicMount

Replacement Router Handles: Porter Cable, Black and Decker, DeWALT Part #908572

Replacement handle for router base from Porter Cable, Black and Decker, and DeWALT. Replaces part 908572 Print in the original orientation. No supports are needed. PETG or other high temp filament recommended with at least 3 perimeters…

Print approx. €4.09–€5.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
96
Likes
11
Rating
5
P
Printableseliasjonsson

DWE7485-Miter-slot: Clean Screw Holes

The chamfer makes the part compatible also with countersunk wood screw.

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
95
Likes
9
Rating
0
P
PrintablesSpankyty

USB RS-485 to DMX/XLR Case

Made this to enclose my DIY Open DMX. It will be used to run my MiniLED moving heads from eBay. USB RS-485 to DMX You can buy this here! https://www.makexyz.com/store/usb-rs-485-to-dmxxlr-case-95eda30fbea0a5ab0e2d973d72049946 Print…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
11
Rating
3
P
PrintablesNozzle

Mafell Erika 85 Absaugadapter auf 35mm Standard Staubsauger

Absaugadapter auf 35mm Standard Staubsauger

Print approx. €4.36–€5.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
84
Likes
4
Rating
0
P
PrintablesR.R.

Horch 853, offenes Cabriolet, 1937

The name Horch was synonymous with regal, sophisticated, and elegant design in automobile industry during the 1930s. With the type 853, the Zwickau-based car manufacturer probably introduced its most remarkable model to the public in…

Print approx. €6.09–€7.44 excl. taxPreliminary estimate for one variant

Downloads
68
Likes
2
Rating
0
P
Printablesmikerofone

IBM P70 / 8573 screen mechanism latch

In addition to the commonly broken display hinges, I also had this latch break on an IBM P70 / model 8573 computer. As a result, the display would no longer stay latched closed. I measured the original part and created a rough replacement…

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
2
Rating
0
P
PrintablesNozzle

Mafell Erika 85 Profil Schutz

Ich muss meine Säge leider aus Platzgründen hochkant lagern. Damit das Aluprofil dabei geschützt ist habe ich diesen Schutz entworfen.

Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
4
Rating
5
P
PrintablesTadeas Tehan

Enclosure for RPI3B+ with X850 V3.1 SSD

Enclosure for RPI3B+ with X850 V3.1 SSD. Part list 4x M3x30mm

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant

Downloads
41
Likes
6
Rating
5
P
PrintablesTolja

osVAC F32-M32 Dewalt DWE7485 Y-Adapter

osVAC Y-Adapter for the DeWalt DWE 7485 table saw, for the lower vacuum port. osVAC Y-Adapter für DeWalt DWE 7485 Tischkreissäge, für das untere Absaugrohr.

Print approx. €8.85–€10.82 excl. taxPreliminary estimate for one variant

Downloads
37
Likes
2
Rating
0
P
Printableswinqooq

Yihua 8858 hot air station holder (Micro 8858)

You will need for assembly: 2-4 studs m3 (10-15 mm) 2-4 nuts m3 3 brass spacers m4 (diameter 6 mm) 3 screws m4 30 mm if your original stand is lost, use this model…

Print approx. €3.67–€4.49 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
4
Rating
0
P
Printables3DRolek

DeLonghi Dedica Tool Holder (EC680/EC685)

DeLonghi Dedica Tool Holder (EC680/EC685) It's covering up the cup tray and make storage space for your coffee essentials. The recess are 52 mm in diameter Tray is for 52 mm mesh disk Printing: Infill 15% geroid layer height 0.3 mm ( to…

Print approx. €3.80–€4.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
4
Rating
0
P
PrintablesMacuma

Epson EcoTank Ink 102 for ET-2850 102

I printed a stand for the included inks 102 of the Espon EcoTank ET-2850. 2x Black 127ml 1x Yellow, Magenta, Cyan 70ml Model created with tinkercad Printed in Prusa PETG orange

Print approx. €3.48–€4.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
1
Rating
0
P
Printableschrlilje

ePropulsion RS485 plug end cap (Amphenol Ceres Mini Size)

End cap with 7/16-28 UNEF thread for Amphenol Ceres Mini Size connector for comm cables on ePropulsion outboard motors

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
1
Rating
0
P
Printablesmagarbl4

Elfbar Elfa Master – 850mAh Pod-System Cover_Cap

Staub-Deckel für Elfbar Elfa Master – 850mAh Pod-System

Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
3
Rating
0
P
PrintablesGarboTec

Ford Transit MK2 (1985) Oldtimer - Dashboard Clips

These are dashboard clips for an Oldtimer. The Ford Transit MK2 (1985). The old clips breaks due the process of long aging and the dashboard cant be secured. These clips fit perfectly into the opening and are secured by the long plastic…

Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
2
Rating
0
P
PrintablesLayerCake

Supermicro Slim ODD Bay ICY DOCK MB852M2PO-B Adapter

While the ICY DOCK MB852M2PO-B can be mounted with the standard hardware in a Supermicro server, it will have a lot of room to move, this adapter fixes that issue by not using the mounting points on the drive but raising it and mounting…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
1
Rating
0
P
PrintablesPidgeon

Dowel rod (19mmX19mmX85mm)

I didn't have PVC laying around, so I quickly modeled a dowel rod to use. For some reason the STL loads really small in the slicer, so make sure that the dimensions are 19mm diameter (x and y) and 85mm tall/long (z). I printed in PETG…

Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
2
Rating
0
P
Printablesnotyahc67

BMW E28 Engine Hood Mechanism Handle Lever 51231868556

A replacement hood release handle/lever for the BMW E28. This is a replacement for BMW part number 51231868556. This part was broken on my 535is which required me to use pliers to pull the hood release cable. I created this replacement.…

Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
0
Rating
0
P
PrintablesL7899

Mopar 3728574+3728573, Rear bumper reflector 1974-78

Rear bumper reflectors pair, 1974-75 Imperial, 1976-78 Chrysler New Yorker Bourgham. Mopar Part #3728 574 (3728574) #3728 573 (3728573). 9.6.2026: New design. Added LH part. Original designer: Chrysler Co., Detroit MI. No aftermarket part…

Print approx. €3.99–€4.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
3
Rating
0
P
PrintablesRoman Rýdl

Kryty svěráku 85mm

Kryty svěráku na čelisti 85mm

Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
0
Rating
0
P
PrintablesJacopo Tediosi

Support to mount the IMX258 10x85mm webcam on the Original Prusa Enclosure

This is a support to mount the IMX258 10x85mm webcam to the Original Prusa Enclosure (OPE). Please note that there are other sizes of this camera on the market, but this model is only compatible with 10x85mm ones. For example, I suggest…

Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9
Likes
1
Rating
0
P
PrintablesHawkeye

0.8 MOD gear 60T (for the original focuser wheel of the Takahashi FSQ85EDP telescope)

0.8 MOD gear 60T (for the original focuser wheel of the Takahashi FSQ85EDP telescope) , which can be applied for focus automation.

Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
1
Rating
0
P
PrintablesMoto_Garage

1992 Ducati 851 & 1993+ 888 gas tank spacer for Ohlins steering damper mount

Gas tank spacers for the 1992 Ducati 851 and all 1993+ 888 motorcycles. These spacers allow the gas tank to be raised either 3.5 or 4mm, to clear the frame mounting bracket for an Ohlins steering damper. Spacers are placed between the…

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3
Likes
0
Rating
0
P
PrintablesJerrari

MODULITH 185 Under-Table Starter Kit

Turn the underside of any table into storage. Screw in a rail, slide in a drawer. MODULITH rails mount under a desk, shelf or enclosure table with a few wood screws. Cases slide on and QuickLock holds them, so you can swap or rearrange…

Downloads
14,579
Likes
5,054
Rating
4.96
P
PrintablesJerrari

MODULITH 185 Tabletop Starter Kit

GEN2 185 TABLETOP STARTER KIT The easiest way to start the GEN2 QuickLock Modular System on any surface. 185 is the STANDARD depth (about 171 mm inside), sized for everyday storage. GEN2 was originally built to mount under a desk · this…

Downloads
5,713
Likes
2,436
Rating
4.98
P
PrintablesPIZZA_CAT

T34-85 TANK (USSR)

T34-85 USSR tank. The scale is 1:100. Only 2 parts. T-34-85 - the military designation of the latest modification of the Soviet medium tank T-34 with an 85-mm caliber gun. Adopted by the Red Army by GKO Decree No. 5021 of January 23,…

Downloads
5,273
Likes
363
Rating
4.93
P
PrintablesJerrari

MODULITH 185 Classic Drawers - All

Print it, pull it off the bed, slide it in. One piece, zero assembly. Classic drawers print in one go with the handle built right into the front. No faceplates, no screws, no clips. Pop it off the plate and it is ready to go to work.…

Downloads
4,525
Likes
709
Rating
4.98
P
Printablesmatthew duncan

iron man mk85 helmet

iron man mark 85 helmet please size to your head before printing https://www.thingiverse.com/thing:4607836 link to motorize this helmet you will need some mg90 or sg90 servos the video below this a great video on how to make the helmet…

Downloads
4,022
Likes
288
Rating
4.78
P
PrintablesLCSteve

DeWalt DWE7485 Table Saw Zero Clearance Insert

I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…

Downloads
2,971
Likes
378
Rating
5
P
PrintablesBudwin

Mark 85 Ironman Inspired Helmet

Mark 85 Ironman Inspired Helmet Enjoy Category: 3D Printing

Downloads
2,914
Likes
341
Rating
4.87
P
PrintablesJerrari

MODULITH 185 Decor Drawers - All

Pick a drawer, then make it yours. The front is up to you. Decor drawers take swappable faceplates and handles, so you can change the look anytime without reprinting the drawer. Print the body in budget filament and save the fancy stuff…

Downloads
2,406
Likes
311
Rating
5
P
PrintablesJerrari

GEN2 Under Table Rails - 185

MOUNT GEN2 UNDER ANY TABLE OR DESK GEN2 Under Table Rails turn the dead space under any desk, table, or shelf into slide-and-lock drawer storage. Screw the rail up once, then slide GEN2 cases in and rearrange your whole setup in seconds…

Downloads
2,130
Likes
119
Rating
4.91
P
PrintablesJerryie

T34/85 medium tank 1/72

-Two colors -organic support -0.15 layer height

Downloads
1,972
Likes
336
Rating
5
P
PrintablesMarcelismus

Tube Squeezer / Tubenentleerer v2 (for metal tubes) - 40-85mm

A simple printable tool to better empty (metal) tubes like tomato paste, mustard and co. Version 2.0 (2023-11-21): I have recreated the " Tubeentleerer " by Boomi and slightly reworked the design, so the dimensions are very similar to the…

Downloads
1,943
Likes
199
Rating
5
P
PrintablesBudwin

Mark 85 Inspired Iron man Suit

I proudly present the Mark 85 Inspired Suit from Avengers End Game. I don't do social media so I'm going to need you guys to share this where its needed. The hand can be found online, maybe someone can link it in the comments. Sized to…

Downloads
1,759
Likes
210
Rating
5
P
PrintablesYosuke

Short flat nozzle for Makita blower DUB185

A short flat nozzle for Makita 18V blower DUB185. I made this for drying car/motorcycle after washing, but someone may have another way of use. I made 2 versions that have different opening area (740 mm2, 538 mm2). I'm still testing which…

Downloads
1,679
Likes
201
Rating
4.86
P
PrintablesRenba

8mm Lead Screw Grease Applicator – Super Lube 21030 (85g/3oz PTFE Grease)

8mm Lead Screw Grease Applicator for Super Lube 21030 A practical grease applicator for lubricating 8mm lead screws directly from a Super Lube 21030 tube (85g / 3oz PTFE grease) . The adapter screws onto the grease tube and allows you to…

Downloads
1,541
Likes
468
Rating
5
P
PrintablesRapterron

Star Trek Enterprise E (2 parts + alignment pins for easy and big printing ~385mm)

This is a remix of the Enterprise E model from here: ( https://www.thingiverse.com/thing:599139 ). My example model was printed in 2 big pieces and afterwards painted with acrylic color. Pre- scaled and optimized for prusa printers will…

Downloads
1,540
Likes
193
Rating
5
P
PrintablesJerrari

MODULITH 185 Classic Filament Sample Chip Drawers

Flip through your filament samples instead of digging for them. Every chip on edge, in its own slot. Two slotted lanes hold 80 sample chips, 40 to a lane, sorted however you like, so you see every color at a glance and pull out the one…

Downloads
1,392
Likes
402
Rating
4.97
P
Printablesthall72

Lego Compatible (85861.dat) Plate 1 x 1 Round with Open Stud

This model is compatible with the lego system.

Downloads
1,342
Likes
65
Rating
5

Darkness bust – Legend (1985)

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.

Downloads
1,337
Likes
296
Rating
5
P
PrintablesFergusonTEA

Chance Harbour 1850 House (N Scale 1:160)

This is a quick N Scale (1:160) model I did of an old house in Chance Harbour, NB, Canada. This model is meant to have inkjet-printed siding and roofing details added, in an experiment to create more detailed models at that small scale.…

Downloads
1,287
Likes
122
Rating
4.67
P
Printablesthall72

Lego Compatible (85984.dat) Slope Brick 31 1 x 2 x 0.667

This model is compatible with the lego system.

Downloads
1,280
Likes
48
Rating
5
P
PrintablesCS

Tamping Station for Delonghi EC 685 51mm Portafilter Tamper

After a few interations this model did well during testing. Especially when using only one hand for tampering, the portafilter is not stable when pressing down, so a solution must be found. For my portafilter the fit is quite snug. If you…

Downloads
1,268
Likes
134
Rating
5
P
PrintablesPrism08

Print in place Toy Car Dodge Ram 1985

6/1/25: I'm adding a version with no interior (DodgeRamFull) which should be safer for kids. It prints slightly faster as there is less perimeter. The NewDodge version is nicer but when pressing on the cabin (or falling on the floor) it…

Downloads
1,149
Likes
116
Rating
5
P
Printablesfoorschtbar

ESP WeMos D1 Mini and RS485 TTL Adapter Mounting Case for DIN Rails (SDM Energy Meter)

A 35mm DIN rail compatible housing to hold a WeMosD1 Mini and a common RS485-to-TTL Adapter. Print instructions Parts 1x 2 Pin KF301 Screw Terminal 1x RS485-to-TTL Adapter 1x WeMos D1 Mini (microUSB Version, ESP8266) 1x 1mm Optic Fiber…

Downloads
950
Likes
116
Rating
5
P
PrintablesBeefdip

Colt 1851 Navy

Converted to stl from here: https://www.turbosquid.com/FullPreview/Index.cfm/ID/379862 Category: Props

Downloads
910
Likes
53
Rating
5
P
Printablesthall72

Lego Compatible (2853.dat) Technic Engine Crankshaft

This model is compatible with the lego system.

Downloads
887
Likes
60
Rating
5
P
PrintablesCrazy3D

Splicing tool 1,75mm + 2,85mm - filament welding - filament connecting --> You will never have last meters again!!!

Splicing tool 1,75mm +2,85mm - filament welding - filament connecting If you like it --> press like it :-) Use your last meters to create a tool, with which you will never have last meters again! Instead of last meters, you will have…

Downloads
882
Likes
233
Rating
4
P
PrintablesAsh

Multiboard - Daddy Long Leg 85mm & 65mm Peg Hook REMIX

Print parameters: Printer = Bambu Lab P1P Filament = Elegoo blue PLA 1,75 layer hight = 0.2mm Print temp = 210°C Wall loops = 3 honeycomb infill support = NO

Downloads
828
Likes
116
Rating
5
P
PrintablesRobin

Moto Guzzi V85TT anti-turbulence deflector

similar deflectors are available for sale but not in my country and for a (in my opinion) much to high price so i made some myself. Haven't tested them yet, this is the first prototype. I already found things to change so be warned: this…

Downloads
819
Likes
13
Rating
5
P
PrintablesMike

Logitech Feet for a K850 Keyboard (4 and 8 degree)

I accidently broke my feet on my keyboard, Logitech K850. I couldn't find replacement parts so I modeled these using SketchUp and created the STL files for both the 4 and 8 degree feet. Support is needed for the the pin alone.

Downloads
810
Likes
30
Rating
5
P
PrintablesJerrari

GEN2 185-2W-0.5H Decor Parts Drawer V2 - 15 Slot

⭐ Love the GEN2 system? Support the project by joining the Jerrari Club or picking up a premium faceplate collection , it means a lot and helps fuel future designs. JERRARI3D.com The GEN2 Modular System is a 3D printable storage solution…

Downloads
775
Likes
113
Rating
5
P
Printablesretinoic

PVC Card Tray for Epson L8180 / ET-8550

I consider this a WIP due to how variable my experience with the inkjet print process has been . Please comment with feedback from your experience with the process. Model Info This is designed around standard NFC PVC Cards (54mmx85.5mm).…

Downloads
769
Likes
24
Rating
0
P
Printablesthall72

Lego Compatible (2854.dat) Technic Engine Crankshaft Centre

This model is compatible with the lego system.

Downloads
752
Likes
52
Rating
4.75
P
Printablesthall72
Downloads
737
Likes
108
Rating
5
P
PrintablesAneoPsy

AMS Saver - PTFE Cutter - 85mm

AMS Saver - PTFE Cutter - 85mm This tool serves as a convenient aide for accurately trimming the PTFE tube to the specified length required for the AMS Saver. It is designed to adhere to the recommendation of maintaining a tube length of…

Downloads
733
Likes
86
Rating
5
P
Printablesthall72

Lego Compatible (4185a.dat) Technic Wedge Belt Wheel - Not Reinforced

This model is compatible with the lego system.

Downloads
732
Likes
42
Rating
0
P
PrintablesMuffelkraft

Improved Makita LXT 18V Battery Terminal (643852-2)

This 3D printable Makita LXT 18V Battery Terminal is a remixed version of two existing designs, featuring several enhancements for improved usability and compatibility: 3-pin compatibility: Expanded to accommodate 3-pin configurations,…

Downloads
725
Likes
77
Rating
5
P
PrintablesJerrari

MODULITH 185 Cases - All

THE GEN2 185 COLLECTION The complete set of GEN2 185 cases · the Standard collection in the GEN2 QuickLock Modular System . At about 171 mm inside, the 185 is the versatile all-rounder for everyday gear. This model includes all 18 cases:…

Downloads
716
Likes
31
Rating
4.8
P
PrintablesAcgames

Chevrolet Silverado c10 1985

Modelo base sin cortes. Si por algun motivo los neumaticos no se imprimen correctamente he subido un archivo independiente para reemplazarlos. Trabajo en un mejor version tipo Kit card

Downloads
712
Likes
127
Rating
0
P
PrintablesRaschmaschine

DigiSpark Attiny85 Enclosure | Bad USB Stick | Fake memory case | Rubber Ducky

Another case to turn a DigiSpark Attiny85 into a (fake) USB stick (or just a nice enclosure, that's up to you ;-) ). This one features a consistent hole, which allows attaching it to a key ring or some kind of tie. There are also two 2 mm…

Downloads
692
Likes
54
Rating
4.8
P
PrintablesBuildX

#0085 For Original Prusa Enclosure (OPE): MK2.5(S) / MK3(S)(+) / MK4 Sheet Holder and Ejection System

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Looking for MORE upgrades for your enclosure? Consider doing this one!…

Downloads
684
Likes
408
Rating
4.83
P
PrintablesJerrari

GEN2 185 Decor Gridfinity Magnetic Drawer (Legacy)

NEW VERSION: MODULITH 185 GRIDFINITY DECOR DRAWERS These drawers have been redesigned and re-released as part of MODULITH (formerly GEN2). The new page has 12 sizes (1W to 4W in 1H, 1.5H and 2H), a half-grid side channel, optional magnet…

Downloads
679
Likes
100
Rating
5
P
PrintablesCrytorious

Modular Tinywhoop Stand for 65mm, 75mm and 85mm drones

I wanted to have a neat way to display and store my drones on my shelf, but i wanted it to be modular and easy to print. I tried to find something fitting online, but couldn't find anything that really met my expectations, so i hopped…

Downloads
674
Likes
81
Rating
5
P
PrintablesMaxilo311

Stanley Cup 30oz / 850ml Straw cap

The Straw on our 30oz / 850ml Stanley cup has a diameter of 9,5mm. The model fits perfectly to our straw. I have printed mine in TPU. Let me know if you have problems or wishes.

Downloads
667
Likes
74
Rating
5
P
PrintablesYordan

Overhang Angle Test 45-70/85 deg

Remix with 45-85 deg and 45-70 deg. Category: 3D Printing Tests

Downloads
663
Likes
14
Rating
5
P
PrintablesKrope

DeLonghi Dedica EC685.M accessory Bar

The holder is for the “Filter holder”, the 1 and the 2 cup Filter and the “De'Longhi DLSC058 Tamper” but the Plastic Spoon/Tamper also fit. Printed with the Bambu Lab X1 Carbon in 0.16mm with 0.4 Nozzle, with supports. Using Extrudr…

Downloads
653
Likes
118
Rating
4.9
P
Printablesthall72

Lego Compatible (22885.dat) Brick 1 x 2 x 1.667 with Studs on 1 Side

This model is compatible with the lego system.

Downloads
651
Likes
34
Rating
3
P
Printablesjuh

PCA9685 servo driver case (Fischertechnik or standalone)

A case for the PCA9685 16-Channel Servo Driver board from adafruit and its cheap chinese clones (see note below). The bottom part comes in two versions: a plain standalone version and one with connectors for the fischertechnik…

Downloads
644
Likes
52
Rating
5
P
PrintablesStefan

Staircase/Treppe for e.g. Playmobil 70985 Puppenhaus

Treppe für z.b. Playmobil Puppenhaus 70985 Staircase fits for e.g. Playmobil Take Along Dollhouse 70985 Multicolor mit single Noozle - Farben wechsel auf 2,5mm einfügen -→ dann hat der Handlauf eine andere Farbe als die Stiege. → 3mf -…

Downloads
632
Likes
91
Rating
4.86
P
PrintablesModel Magic

He-Man & the Masters of the Universe - He-Man & Battle Cat - 1983-1985

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
629
Likes
61
Rating
0
P
Printablesthall72
Downloads
614
Likes
35
Rating
3
P
PrintablesSireInsectus

PCA9685 16 Channel PWM Servo Motor Drive IIC Interface Module 12-Bit

See https://www.amazon.com/gp/product/B08CHCG42N/ref=ppx_yo_dt_b_search_asin_image

Downloads
595
Likes
11
Rating
0
P
Printablespino1021

BMW Z4 E85 Silhouette Wall Art

BMW Z4 E85 Easy to print . Of course you can scale it the size you want. Easy to print for up to 90cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on…

Downloads
595
Likes
74
Rating
5
P
PrintablesArtus

CZ 75 / 85 gun holder

I needed something for my car so I adjusted and reduced the holder to fit the CZ 75/85 tested directly on the weapon. Can also be used under the table or on the bed. There are two options for right-handed and left-handed.

Downloads
592
Likes
96
Rating
5
P
PrintablesHamstersocke

ESP32 DIN rail enclosure (RS485)

This enclosure is for a ESP32 D1 mini with RS485 modul and fits a DIN rail (one module). It consists of three parts: body, lid and a clip to fix it to the rail (like most devices). Two PCB terminals (2 and three pins) are used to connect…

Downloads
586
Likes
50
Rating
5
P
Printablesthall72

Lego Compatible (85974.dat) Minifig Hair Long with One Front Lock

This model is compatible with the lego system.

Downloads
572
Likes
66
Rating
5
P
PrintablesJohannes

BMW C1 Overload Protection (4652852493)

Overload protection part for BMW C1 stand mechanic See Repository with full history, issues and more: https://github.com/jteiwes/overload_protection Design The design was created from a broken part by measuring and test-printing several…

Downloads
566
Likes
12
Rating
0
P
PrintablesCADclass.org

0-85 degree Overhang Calibration Test

0-85 degree Overhang Calibration Test

Downloads
536
Likes
26
Rating
5
P

Folding Phone Stand with 85 Degree Max Angle

I needed a phone stand that could be folded flat for mailing in an envelope, but that also allowed for a nearly 90 degree upright angle, the ability to swipe up from the bottom of the phone without the stand getting in the way, and robust…

Downloads
524
Likes
48
Rating
5
P
Printablesthall72
Downloads
518
Likes
40
Rating
3
P
Printablesdrago fire

LEGO PART 85861 Plate Round 1 x 1 with Open Stud

LEGO PART 85861 Plate Round 1 x 1 with Open Stud

Downloads
513
Likes
16
Rating
4