Requiem Arrow( Jojo's Bizarre Adventure )
This is the requiem arrow from Jojo's Bizarre Adventure Part 5: Golden Wind used by Giorno Giovanna
- Downloads
- 1,271
- Likes
- 120
- Rating
- 4.83
1,973 models
This is the requiem arrow from Jojo's Bizarre Adventure Part 5: Golden Wind used by Giorno Giovanna
Rework of an older model I made. Comes separated in several parts that snap fit together (with the exception of the screen and antenna parts, these must be glued to the body), so it can be post-processed and painted easier. Made in Cinema…
The Steel Ball should be rotating in your palm! In this model, this is achieved with a single 608 bearing located at its center. Note: if this seems like fun to you, you might also like the seasonal Easter Steel Egg . Printing The whole…
2014, Epcot, Future World, Innoventions. This is where for a time, you could find “The Great Piggy Bank Adventure”. This exhibit presented by T. Rowe Price was a fun bunch of mini games exploring the importance of saving and investing.…
Just finished season two of JoJo's bizzare adventure. Loved Iggy, he is favourite mutt! So I made a sculpture of him you can print. :)
I printed this model in one go on my Ender 3 Max using custom organic supports made in PrusaSlicer 2.7.1 The included 3MF file will allow you to edit the settings (in PrusaSlicer, haven't tested it in any other slicers), and the gcode is…
Drucke zuerst die Datei Advent_Test (1).gcode um zu sehen, ob die Kerze passt. Einstellungen: 0.4 Nozzle 10% Füllung (Gyroid) Keine Stützen notwendig
Emperor Gun Jojo's Bizarre Adventure
BMW R 1250 GS Adventure Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Jo Jos bazar adventure Sex Pistols. They ride bullets to help guide them.
Credit to original creator: https://www.thingiverse.com/thing:5206053
3D printed Carpuride GPS holder, with holes for screws and nuts. Steel head bolts 6 hexagonal internal Ø5 x L.20 mm
Eine für die Adventszeit gedachte Tischdeko, gedruckt mit 15% innfill und stützen auf dem Druckbett. Über likes makes und follower würde ich mich sehr freuen, Peace MazZe
UPDATE 9/1/2025: Uploaded the V2 model and .gcode file.I installed the AD5M enclosure kit on my printer and the top loop of the PTFE tube was contacting the acrylic lid, so I shortened the height of the model another ~4mm to fit. I also…
Print your own advent calendar with a stylish hexagon-look and add some 3d-printed flair to the holiday season! Perfectly sized for a daily dose of a small chocolate treat (I ended up using Lindor Truffles). I've added all the files to…
Model of Grim, from the series Grim Adventures of billy and Mandy. Printed 15% infill + Tree supports. Care with arms and staff when removing supports. This is the first time I've taken one of my blender art and turned it into a 3d print…
Credit to original creator: https://www.thingiverse.com/thing:5427331
Advent wreath designed for tea (led) candles. When using real tea candles, I recommend printing from durable material and using only under supervision. Tested only from PLA and the shape does not deform. For candle stands, I recommend…
Esta es una ampliación de la base de la pata de cabra de la moto KTM 390 Adventure. Sirve igualmente para la DUKE 390, no se si para otros modelos. He comprobado que las bases de la pata de cabra tienen ligeras diferencias aunque sea el…
Print-in-place advent calendar with opening windows, that hide a new QR code for each day with a link to content on the internet. Before opening, the windows are sealed with thin one-layer strip, that can be broken easily. Of course, you…
Nummer 1 - 24 für Adventkalender. gcode mit Farbwechsel (ohne Gewähr)
A small star with a cut to hold a paper bag or something and to frame a paper printed number. The intention was to replace the clothespins my wife uses for her advent calendars, so I designed this little star. It take some work to clean…
I hope you like this print! The square flat boxes are for the lids on your advent calendar! You probably want to print it at actual size, if there are any errors please let me know!
🥚 Introduction How does Gyro celebrate Easter? By replacing his regular steel ball with a steel egg ! For printing, there are two options: The full rotating fidget (four printed parts plus bearing and weights) A plain egg , just for…
Drehknopf für Hercules Pult in weihnachtlichen Stil. Knob for hercules controller (x-mas look)
alpine climbing adventure fitness logo
Makes your gun shoot harder
This is printable enclosure for Flashforge adventurer 5m, this model is made by Flashforge . Flashforge will soon release a kit on their homepage with neccesary items. Measurements for panels: Top Plate 332 x 315 x 3 24mm Radius Handle…
I remixed the drag chain by INQUE and cut off the spool holder portion because I use a side mounted spool holder and don't have a use nor the space for the vertical spool holder. I also added in the drag chain termination part by Doug…
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
23 June 2024 - NOTE: Updated model of the insert to accommodate the longer allen keys that are being shipped with new printers. This tool box holds all the accessories and tools that are shipped with the Flashforge Adventurer 5m and 5m…
Уменьшение стука стола при Z-HOPE: фиксатор гаек ходовых винтов. Нужно два фиксатора на передние стойки (-SIDE) и один на заднюю (-BACK). You need two retainers for the front struts (-SIDE) and one for the rear strut.
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
This design can be printed using one of the AD5X feature - Multi-Color Printing.
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
This is an enclosure I created while making my BMO embodied local AI agent. A full video break down of the project is available here: 🔧 Additional Hardware: Raspberry Pi 5 (16GB) Pimoroni NVMe Base Duo Geekworm X1203 5V UPS shield…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
now you can print with support or just use the 2 parts with no support for the two part you need glue. printed in abs if you want the part to be stronger print the parts like in the picture.
I needed to save space and access the filament easily. I created this :-) (easy to print NO raft or support needed) 15% infill should be enough. It mounts on the right side top! Works for both - small and normal 1kg. filament rolls. 𝔗𝔴𝔬…
Hello! Thanks so much for being here! This project was a long time coming. I've been wanting to design a 3D printed BMO since before I started in the hobby. I poured a lot of time and effort into this project, and I'm so stoked for people…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…
An extruder guide for Flashforge Adventurer 5m Pro to avoid scratches on the inside of the cover. The bottom part is made flexible to follow the extruder tube in any direction, while at the same time hold it down a little bit. Make sure…
Overview A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for…
VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…
Модификация системы обдува 3D-принтера Flashforge Adventurer 5M Modification of the Flashforge Adventurer 5M 3D printer blowing system Печатать без поддержек и отключить замедления на внешних периметрах Print without supports and disable…
You need 2 M4x8.1 Heat inserts and 2 M4x16 socket screws. First mount the base on the printer, after that you can mount the holder to the base. No need to reposition the filament runout sensor.
I bought this HysiPrui PEI build plate from Amazon for my AD5M and wanted to print the handle part. I found that the build plate was added to OrcaSlicer by FlashForge. Source:…
Overview A re-imagined side mounted spool holder for the Flashforge Adventurer 5M. This design fits over your existing enclosure piece “D1”. A 4mm x 10mm bolt might be needed to replace the existing bolt in the guard plate, although I was…
Дверная петля меня не устроила, так как я сломал ее, пытаясь открыть. Я разделил его на три части, и оно прекрасно работает. Теперь, если вам нужно снять дверь, это сделает всего два движения, достаточно вынуть два штифта.
The rest of the files can be found → HERE ←, as well as a description of the necessary parts. The model is put directly on the filament slot on the printhead. Therefore, to change the filament, you will no longer need to remove the tube…
Neat, easy to print enclosure with 4 mm (or 3 mm) polycarbonate sheet panels. The purpose of the creation was to minimize the design and the likelihood of damaging the display by accidentally snagging it. Approximately 750 grams of…
Recommend using PETG or better and at least 10% infill Hardware needed: 2 M3x16 for filament sensor 1 M4x8 2 M3x6 2 M3 brass inserts Working on some mods to the Adventurer 5M follow me for more updates :D
FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…
Use tree supports only in green area (see photos). Print with something heat-resistant (abs, abs-gf, petg-cf, etc). Self-tapping screws for fan mount. Holes for 5x3 magnets.
Improved version with display installation from the inside (without frame). _____________________________________________________________________________ Enclosure with 4 mm polycarbonate sheet panels https://a360.co/47jcXw3 . The purpose…
This short explainer video is less than 1 minute long. Side Cutter Mount adapted for use on the Flashforge Adventurer 5M (AD5M) with the DIY printed enclosure. One model suits the front right or left, while another model suits the back…
I have made this model to get all instruments following with FF ADV5M PRO: side cutter, screwdriver, Allen wrenches, glue stick, grease, nozzle cleaning pin, extra hot-end/nozzle assembly and USB stick, also a place for the printable…
Printed with ASA and 0.4 nozzle with 0.2 Layer height.
I have incorporated several ideas into a single model. Remix of the official enclosure risers. Remix of Riser D, took the remix of santa(lemuroff) and added HSW on his model. Check out my spool holder remix as well. I took the idea of…
printed with abs with 30% infill work great with all spool type.
All swords are sectioned for a minimum print volume of 250mm cubed. they can be scaled down if needed. will require glue and either an AMS or some painting. Visit this link for the wall rack and nameplates -…
Italiano: Ho creato questo organizer perché non ho trovato altri progetti simili per le mie stampanti (AD5X e AD5M) senza enclosure. Com'è fatto: L'organizer è diviso in due pezzi: La Staffa di supporto: Si aggancia direttamente sul retro…
**UPDATED:: 07/11/25 Attempted to add FF logo =). Loaded it as a .3mf since I added it in slicer. 07/04/25 Adjusted the fan muffler angle and depth for better fit to hot end Cut lateral piece thickness down for better clearance and…
Hello, This is my first ever post and also creation I made for the FlashForge Adventurer 5M/Pro (AD5M) series printer. This kit allows the AD5M to have a drag chain that is not only minimal, but also keeps the new filament sensor in the…
После покупки 4го сопла решил сделать для них единую коробку. В конструкции предусмотрен зазор под пальцы для легкого доставания отдельного сопла. В роли оси подходит кусочек прутка. Магнит 5х3 мм.
This model allows you to modify the coil support and better position the cables. I also left two holes to install a side support, in my case I made a support for the camera YES YOU CAN REUSE THE ORIGINAL SCREWS BUT LONG SCREWS ARE…
Overview Need a custom toolhead cover? Maybe your original was damaged? Take your pick of chamfer(sharp edge) or fillet(round edge) from the designs I have made or if you do not like them I have included the parametric source file for you…
Printed with PLA and 0.4 nozzle with 0.19 Layer height. Nail polish was used for the coloring. Smear the surface with petroleum jelly, pour the nail polish, and wipe off with a cotton disk. Mr_medvedko dushniak & diatel
This model is of the steel ball weapon from the anime Jojo's Bizarre Adventure. A step version is included to facilitate modification. I had luck printing the halved version (print two copies as the halves are identical) at 0.1 mm layer…
First mount the base on the printer, after that you can slide the holder to the base. WORK IN PROGRESS, still need to make the testprint but should fit according to the drawings.
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
Christmas day Steering wheel + BONUS Check our models, you will find there Christmas bonus. Stay in contact with us. From 25.12. a special competition on facebook with a photos of formula prints . Facebook:…
Complete enclosure as tiny as possible and with multiple opening options. I didn't like the official enclosure as I think makes the printer very big and has some kind of a toy appearance. Original metal frame at sight (not bigger than de…
Hinged lid stand for Flashforge Adventurer 5M (AD5M) 3d printer. Works with manufacturers' DIY enclosure - just unscrew screws and screw them back with this stand. When stand is not needed, it just laying flat on the back side of a lid.…
Use M4x10 self-tapping screws to mount the holder. Tear a hole for the screwdriver on the back side after printing. Print settings: Auto-orient the model in the slicer (lay the model on its top surface). No supports needed. 15-30% infill.…
Holder for spare nozzles of the Adventurer 5M & 5M Pro Nozzles. Gridfinity size 1x2 units and 4 units high. Fits the Flashforge box : https://www.printables.com/model/725161-flashforge-gridfinity-box
Printed with PETG and 0.4 nozzle with 0.2 Layer height.
Both of these two models can serve as a drop-in replacement for the Flashforge injection molded camera mount, which is stock on the AD5M Pro, and can be ordered from Flashforge's website for use on the AD5M (non pro version). One of the…
A holder for three Flashforge Adventurer 5M build plates.
Drag chain piece for enclosure upgrade. I printed 29 total. (Revised to 27 once I attached a drag chain clip). Recommended to print with the flat end down and the open end up. Does not include a drag chain clip.
Remixed it to save 10 gramms and maybe better airflow. Test it yourself too!
I modeled the the drag chain clip as seen in the instruction manual for the Flashforge Adventurer 5M DIY enclosure . Drag chain clip This was designed to fit with Lauren Mills' drag chain model . I used a 16mm M3 screw for the drag chain…
Посадочное место для вентилятора 5015 24В Для сборки и крепления понадобятся шурупы диаметром 2.5-3мм и длиной 10мм - 11шт. Для подключения сервы и 1 вентилятора написал небольшую инструкцию, работает на плате от Adventurer 5M. Инструкция…
I added holes for 5x2mm magnets to mount these LED bars in the AD5M and be able to easily reposition or remove them as needed. Also added a hole in the end that was filled so multiple bars could be wired together. Model has holes for 8…
HOW TO INSTALL PROFILES Pla profiles for the Flashforge Adventurer 5M pro. Already working on petg, asa and tpu aswell. (Coming soon) More filament profiles will be added aswell. 26.07.25 New profile update for 0.4mm nozzle and new…
I made this organizer for my convenience and as I see it for myself. Write constructive suggestions, if they are significant, I will make adjustments to the model. 2 bolts and M3 nuts with a length of 6 mm were used for fastening.
Smaller top for the FlashForge 5M Adventure 3D Printer. I always thought the “stock” top on the printed enclosure to be a bit too big… I made mine ½ the size… and still fit everything. I also made a smaller Drag Chain extruder end… to sit…
A remix of @BenEngelen_1385989's mount that doesn't need screws or inserts. I wanted to minimize the footprint of the printer as much as possible so I also shortened it so it just holds an average 1K spool. Will print without support if…
These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…
This dust cover is designed for the Z-axis bearing on the Flashforge AD5M (Adventurer 5M). It may also be compatible with the AD5M Pro, but I don’t have that printer to verify - your feedback is welcome. Based on feedback from other…
This is a Princess Bubblegum crown I designed based on the refence screenshot show in the images. The model can be scaled up/down to fit your head size. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Heads-up News Note: I have included my OrcaSlicer project files for illustration of where support blockers were used. If you wish to use them to print from instead of just for seeing what I did, then, if you don't have the Klipper Mod…
Flash Forge Adventurer 5M (AD5M) Fan noise reduction Hot end. Best Modification Reinforced weak areas in the print. (fail areas) Can be printed in standard PLA. The front section thickness increased. Front-facing plate has room for your…
LED from Juupine store. Wedge locked in place. No magnets or screws needed LED https://sl.aliexpress.ru/p?key=lvaxGEh
Overview The original shielding plate for the original Adventurer 5m enclosure files had an error that caused many frustration. Worry no more, here is a shielding plate that will fit, a step file is also included for any modifications…
anti-vibration feet for Flashforge adventurer 5M used default standard setting + auto tree support