Search results: alo

Sort order

4,909 models

P
PrintablesMalolo

Malolo's screw-less / snap fit Raspberry Pi 4 Model B Case & Stands

Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…

Downloads
12,788
Likes
2,251
Rating
4.96
P
Printablesmatej

upholstery clip 8mm / prichytka calouneni 8mm

Příchytka na čalounění - dočasně trvalé řešení zlomené příchytky. Tisknuto z PET-G a drží (z PLA praskla). Temporary (forever) solution. I printed it from PET-G and works fine (or ABS/ASA should be OK, from PLA it cracks - too fragile…

Downloads
3,329
Likes
1,339
Rating
4.4
P
PrintablesSnazzyLabs

Standalone Touch ID Module for Mac!

Apple introduced the Magic Keyboard with Touch ID in 2021 for Apple Silicon computers rocking an M1, M2, etc. That's all well and good, but for those that preferred keyboards that are actually good, many resorted to taping Apple's…

Downloads
2,936
Likes
684
Rating
4
P
PrintablesFreddyZ

fully printed talon mag

Features : smooth layerlines along direction of insertion = STRONG and SMOOTH . Designed specifically with NO SUPPORTS , NO crazy overhangs. The “roof” of mag body is chamfered and recessed; meaning bad bridging performance does not…

Downloads
1,932
Likes
259
Rating
4.75
P
PrintablesCdRsKuLL

BB-8 Google Home Costume or Standalone model

I decided my Google home was a bit boring so designed him a BB8 Costume :-) If you haven't got a Home, then I've also included 'no speaker' parts so you can just make him as a model. youtube.com/watch?v=_-5x7baY81o Print instructions Can…

Downloads
1,897
Likes
557
Rating
5
P
PrintablesAkum.cl

articulated surprise gift box - caja regalo sorpresa articulada

Articulated surprise gift box: Educational, its articulated base will allow you to surprise your friends with a surprise gift. Customizable, its pieces are printed separately, you can use different colors without needing a multi-material…

Downloads
1,316
Likes
262
Rating
5
P
Printablesiczfirz

Mandalorian Bust Multicolor for MMU ERCF Palette

Don't forget to like this model. Pre-sliced gcode by ryanL You can check his made in the comment session. Multicolour pose. Category: Sculptures

Downloads
861
Likes
436
Rating
4.82
P
PrintablesRobertusMaximus

Wargame Building Terrain - Stand Alone Building - Group Three!

Wargame Building Terrain - Stand Alone Building - Group Three! Complex stand alone building with floor! Complex stand alone building with floor and slide in door! Complex stand alone building with No floor! The empires of the future won't…

Downloads
602
Likes
154
Rating
5
P
PrintablesBri's Prints

VALORANT Viper Snakebite with LED

Features Highest quality mesh you'll find; no unbaked-normal-maps nonsense. Details are embossed to match the game accurately, and better than even the best paid model from elsewhere ;-) Battery cartridge holds 2x AAA batteries and your…

Downloads
522
Likes
96
Rating
5
P
PrintablesMiguel M.

Mandalorian Magnet

Just a 2D Mandalorian helmet. Slap any magnet you want on the back and VOILA!!! Included print file includes a color change. .stl also included Enjoy! And If you have a minute, check out my other models!…

Downloads
487
Likes
130
Rating
4.86
P
Printablesnatepb

Mandalorian Helmet Trailer Hitch Cover - 2"

Remixed the Mandalorian trailer ball cover to fit into a 2" receiver hitch since I don't like leaving my hitch in all the time. Printed with gray PLA, and colored the middle in with a few coats of black sharpie, turned out pretty nice.…

Downloads
442
Likes
96
Rating
5
P
PrintablesCdRsKuLL

BB-9 Google Home costume or standalone model

Further to my BB-8 design, I thought he needed a friend.. welcome BB-9 :-) Print instructions Print with no supports :-)

Downloads
405
Likes
113
Rating
5
P

Follow along reading pointer for kids

Plated for 8 individual pointers, or for 1 single pointer - printed at 20% infill with PETG for flexibility/break resistance given how young kids can be. Organic supports on build plate only

Downloads
373
Likes
35
Rating
0
P
PrintablesCalebTimoteo

Master Chief - Halo Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Downloads
361
Likes
108
Rating
5
P
PrintablesdePrintinator

CR10/S Standalone Mod - Control Box

Detailed write up to come; Box contains: BTT SKR E3 v2 Raspberry Pi 3B+ Solid State Relay EZ-ABL Board DC Buck Converter (12v to 5v for RPi) 2x 40x40x10 fans Check my profile for the rest of the components: PSU Mount LCD Mount…

Downloads
355
Likes
68
Rating
0
P
PrintablesAdrián Vidal

Fernanado Alonso Signature

A 3d printable in one piece model of the F1 driver Fernando Alonso

Downloads
290
Likes
35
Rating
5
P
PrintablesThe Squall

Numbered Knobs for Standalone Drybox - MMU

While printing the dry boxes for the Lack Enclosure, I saw a remix that had vinyl numbers on the individual dry boxes, and then a separate remix that added "mmu-type" capability by having a number added on top with a color change if…

Downloads
270
Likes
31
Rating
4.92
P
PrintablesdePrintinator

CR10/S Standalone Mod - LCD Mount

This is part of my CR10S conversion to stand alone- see the control box page for more detail.

Downloads
242
Likes
42
Rating
5
P
PrintablesKyle Kindle

Buffalo Bills Coasters

Fun set of 4 Buffalo Bills coasters with holder. Print them all, or just a couple. Model files included for those of you who do not have the same set up as me, or if you want to print more than 1 coaster at a time. 110mm (~4.25")…

Downloads
201
Likes
24
Rating
0
P
Printables3DHippo

Skeleton with Cantaloupe

I got the opportunity to work with a 3D scanner and I scanned some skeleton I had lying around, because I thought it needed a nice hat. If you love this design and want to see more fun projects like it, consider joining my club on…

Downloads
165
Likes
37
Rating
5
P
PrintablesJulgonz85

Calabaza Haloween cortador de galletas

Cortador de galleta en forma de calabaza con motivo a haloween.

Downloads
144
Likes
13
Rating
0
P
Printablesrrro

Lucky 13 Mandalorian Rifle and Jetpack - remix

I printed the Lucky 13 Mandalorian costume by CrazyBird199, but the rifle and the jetpack did not print well. Closer inspection showed completely hollow interior and too fine details stretching the printer to its limits. Regarding the…

Downloads
129
Likes
21
Rating
0
P
PrintablesRobertDaleSmith

Fisher-Price Controller Analog Mounts

This project picks up where the Adafruit learning guide ends. Originally this started to mount the Grove - Thumb Joystick , but evolved into mounting six additional buttons . This enables the top four rocker buttons to become real buttons…

Downloads
125
Likes
9
Rating
0
P
PrintablesRiddoch Labs

Buffalo Bills Josh Allen Bottle Opener

Printing and using this bottle opener will significantly increase the chances of the Buffalo Bills winning the Super Bowl. Printed in PLA with two colors. Insert a penny to allow this tool to open bottles. It is press-fit Enjoy! Go Bills!!

Downloads
123
Likes
13
Rating
0
P
PrintablesREMLURELMI

Honda Ridgeline/Talon Door Latch Pin

Retaining pin for the cubby door in 2017 or newer Honda Ridgelines 71509-SZA-A01 Also fits the Honda Talon Air Cleaner Outer Cover - (thanks @JustSomeEngineer !) : Recommended Print Settings Print Orientation: Default as modeled Material:…

Downloads
94
Likes
23
Rating
5
P
PrintablesAlukim Vrdoljak

megalodon tooth

realistic replica of a megalodon tooth

Downloads
93
Likes
13
Rating
0
P
PrintablesJulgonz85

Cortador de galleta pantalo y camisa

cortador de galleta forma de camisa con corbata y pantalon Dia del padre

Downloads
89
Likes
11
Rating
0
P
PrintablesJakub Kříž

Elektron Analog 4 | Elektron Octatrack - Rack Ears (19" Rack Mount Kit)

The Elektron Analog 4 MKI 19" Rack Ears are a great way to make your Analog 4 MKI part of bigger static setup. It is compatible with standard 19"rack with inner width of 458.5 mm, but it can also fit some non-standard 19" racks not…

Downloads
85
Likes
6
Rating
0
P
PrintablesAinon3Dtisk

Buffalo skull on the hood of an RC car

Hello, Welcome to my profile, full of models and miniatures :-) I have a Buffalo skull for you on the hood of your RC Car. The skull is very nicely done and you have 2 versions from me - 1:10 and 1:12. It can be attached to the hood using…

Downloads
75
Likes
11
Rating
5
P
PrintablesRepkord

X-Wing RackStand for RepBox, RepWinder, RepRack, and as a standalone spool holder.

Here's some Star Wars day fun. Add a little style with an X-Wing inspired spool holder setup! RepRack, RepBox, and RepWinder Compatible. May the fourth be with you! Check out our Millenium Falcon version of this stand too! Bill of…

Downloads
75
Likes
28
Rating
0
P
Printablesrazandersen

Boba Fett / Mandalorian coaster

boba fett / Mandalorian coaster

Downloads
70
Likes
7
Rating
0
P
PrintablesStrankler

Huawei P20 pro Phone-Camera Mount for analog microscopes

I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…

Downloads
62
Likes
18
Rating
0
P
PrintablesGamerMechanic81

Zócalo Neon Sign (From Babylon 5)

The Zócalo on Babylon 5 was a central meeting place in red sector where many characters would go to unwind, have drinks etc. The ice blue neon sign recreated here featured in many many episodes in the background. Through various forums…

Downloads
45
Likes
17
Rating
5
P
Printablesunit

Vykrajovatka - pernikova chaloupka

Sady vykrajovatek pro vykrojeni dilu na pernikovou chaloupku.

Downloads
41
Likes
7
Rating
0
P
PrintablesBaloo 3D

Scout patch badge of Baloo bear, ready to be sewn on

This badge is perfect for all you Scouts and Guides out there who've adopted Baloo as your totem name, especially for Cub Scout leaders. Baloo is the wise bear from "The Jungle Book," the bestseller by Rudyard Kipling. I'm attaching the…

Downloads
39
Likes
5
Rating
0
P
PrintablesStobbart

Baguette pour cadre de plaque minéralogique

Baguette de remplacement pour les cadres de plaques minéralogiques. Deux versions sont proposées: baguette normal baguette avec une petite poignée pour pouvoir la coulisser plus facilement

Downloads
35
Likes
1
Rating
0
P
PrintablesDiana Šinková

Ornament of musical instrument - CIMBALOM

Ornament of musical instrument - CIMBALOM Multicolor by layers (simple extruder)

Downloads
22
Likes
3
Rating
0
P
PrintablesPavel

svatozář / halo

známým se mají narodit dvojčata. plínky jim dá každý, já pro ně plánuji svatozář na hlavu. Budou ji potřebovat.. (poznámka - moc to na hlavě nedrží, chce to použít nějaké sponky do vlasů) ** My friends are having twins. Everyone will give…

Downloads
21
Likes
3
Rating
0
P
Printablesjohnonolan

BenQ Screenbar Halo Mount for Apple Pro Display XDR

This mount adds a 5mm base to ensure that you can mount the screenbar without covering the display's ambient light sensor, which is needed to enable automatic screen brightness functionality in MacOS. The webcam in the photo is an…

Downloads
20
Likes
2
Rating
0
P
PrintablesMaciej

Falowiec Gdańsk Poland 3d model 1:2000

case study model i made as an architecture student

Downloads
20
Likes
2
Rating
0
P
PrintablesMigue

Calonny 4G box

Caja para calonny 4G Tarda unas 4 horas y sale bastante bien.

Downloads
14
Likes
1
Rating
0
P
PrintablesRadu Preda

NextBase Halo Pro winscreen mount

I've lost the original mount when i've sold the car so went on Tinkercad and designed this.

Downloads
13
Likes
0
Rating
0
P
PrintablesELAdamito

Záložka do knihy The Mandalorian’s Mythosaur

Záložka do knihy s motivem Mythosaur.

Downloads
12
Likes
4
Rating
0
P
PrintablesRyan Roehnelt

Pentagonal Crystal for the PiBeta CsI calorimeter at PSI

I am building a section of the PiBeta calorimeter to do a fit check for some parts to go inside it. The pentagonal shape is what the rest of the hexagonal pieces are arranged around.

Downloads
11
Likes
0
Rating
0
P
PrintablesChris Jumbo

Jalousien Abdeckung

Neue Abdeckung für Jalousien Steuerung. beim wechseln muss die Platine an den Ecken mit einem mini Schraubendreher herausgedrückt werden. Hersteller der Steuerung ist mir leider unbekannt. Lässt sich mit PLA-tough gut drucken, ABS und…

Downloads
11
Likes
2
Rating
0
P
PrintablesIRuddell12

Crash Derby - Halo Warthog

This is the Warthog from HALO game piece for the Crash Derby board game, enjoy! : ) Print using supports for the Warthog Body file + Warthog Turret File Print without supports for the Warthog Base file Print using: .1mm Layer Height .4mm…

Downloads
7
Likes
5
Rating
0
P
PrintablesVentura

CARNIVAL MASK KARNEVALOVA MASKA

CARNIVAL MASK KARNEVALOVA MASKA

Downloads
7
Likes
0
Rating
0
P
Printablesondra idelbek
Downloads
6
Likes
0
Rating
0
P
PrintablesGymRBK

Úprava kalorimetru od Helago / Optika Science

Koupili jsme si nový kalorimetr - tenhle: 2099 Vodní kalorimetr 350 ml . (Zdá se, že výrobcem je OPTIKA Science Italy . Přestože je to značné vylepšení ve srovnání s našimi stávajícími kalorimetry z NDR, i tento má své mouchy. Teploměr je…

Downloads
5
Likes
0
Rating
0
P
PrintablesPoseidon

SpoolSense Dock Standalone Scanner Case (ESP32 + PN5180+ 16x2 I2C LCD + RGB LED) for CerealBox Kichly, Skroam

This is still work in progress. I make this for my Prusa XL as a dock for my DryBoxes supporting the RFID reader from the Project SpoolSense.org This enclosure is part of the SpoolSense ecosystem – an open-source project for tracking…

Downloads
4
Likes
2
Rating
0

Odpalovací rampa octové rakety - ZŠ K. V. Raise

Žáci sami vymodelují a vytisknou odpalovací rampu octové rakety. Rampu následně využijí v terénu při provedení fyzikálního experimentu.

Downloads
3
Likes
1
Rating
0

Etalon metru - přívěšek

Tvorba přívěsku ve tvaru etalonu délky

Downloads
2
Likes
0
Rating
0
P
Printablesstevenmarx

How to print the Mandalorian helmet -> size S, M, L and 3D print settings

Using TheBrokenNerd83's design ( https://www.thingiverse.com/thing:3578797 ), I printed the helmet in different sizes and tried to use as little support structure as possible. I share my experience with you in the video. This Video shows…

Downloads
23,954
Likes
4,219
Rating
4.91

The Mandalorian Bust

If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. FDM users…

Downloads
20,947
Likes
6,413
Rating
4.99
P
PrintablesNat

The Octahedroflake: A higher-dimensional analog of the Sierpinski Triangle

Please consider supporting my hobby. You will make my day! Or just print this out and share your make. I appreciate your support! If you are looking for the pyramid, I moved all those models to their own page. You can find it here.…

Downloads
20,800
Likes
5,734
Rating
4.98

The Mandalorian - Star Wars Fanart - 30cm

“This is the way” The Mandalorian, also referred to simply as Mando, is a fictional character in the Star Wars franchise and title character of the Disney+ series The Mandalorian. Orphaned as a young child, Din Djarin was adopted into the…

Downloads
19,764
Likes
5,808
Rating
4.96
P
PrintablesGamerForge

Star Wars The Mandalorian Full Costume/Cosplay (Helmet, Armor, Jetpack, Blaster etc.)

I've put all the pieces together to print an authentic “The Madalorian Cosplay” with quick instructions. Please pay attention to the size of the parts! scale the parts to your size 12.09.2023 - added new model - The Mandalorian Cardridge…

Downloads
11,948
Likes
2,888
Rating
4.86
P
PrintablesMalolo

Malolo's Silica Gel / Desiccant Containers

I designed this silica gel container mostly for two reasons: I looked at several different silica gel containers and even printed a few but always found something I was not entirely happy with (I most likely didn't look at every single…

Downloads
11,400
Likes
2,050
Rating
4.94
P
Printablesdanzaywer

DUMMY 13 HALO SPARTAN ARMOR

Please post makes! This model is a modification of the DUMMY 13, follow the Soozafone rules , in particular: the frame must be printed in ABS or PETG, PLA is NOT suitable! Non dimenticate CARTER A-259! I adapted jace1969's files and…

Downloads
11,102
Likes
2,926
Rating
4.69
P
Printablesiczfirz

The Mandalorian Support Free Remix Pose 3/5

Subscribe Now! A very good model from Velrock. Yet another remix pose Time-lapse print video : https://youtu.be/xsk3FDa-Cx8 Baby Yoda : https://www.thingiverse.com/make:872409 Live print in progress. Subscribe to find out more support…

Downloads
10,747
Likes
2,717
Rating
4.92
P
PrintablesBas

Elegoo Centauri Carbon - Side panel protector - Spool "dragging" along side panel

All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…

Downloads
10,654
Likes
1,059
Rating
4.95
P
PrintablesMatyáš Flek

reaver karambit 2.0 valorant FIXED

NEW FIXED FILE !!! This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing

Downloads
10,009
Likes
382
Rating
4.69
P
PrintablesB4Squared

Halo Master Chief Bust

Halo's Master Chief from Halo 2/3. This is a model conversion from the Steam Workshop: https://steamcommunity.com/sharedfiles/filedetails/?id=1288452790 Print instructions Print with supports for helmet and chin.

Downloads
9,635
Likes
2,480
Rating
4.91
P
Printablesfunction.3d

PETALOT PET Filament Machine

How-to video series: https://www.tiktok.com/@function.3d/playlist/PETALOT%20Build-7340398832935521056 Instruction Manual : https://docs.google.com/document/d/1J9RF3sPK-0WwBR4Ce06RCnpbVmlk7zAESvQx1utmXmc/edit?usp=sharing Electronics,…

Downloads
9,317
Likes
2,045
Rating
4.94
P
PrintablesMalolo

Malolo's screw-less / snap fit Raspberry Pi 3 Model B+ Case & Stands

There already is a plethora of raspberry pi cases on the internet and the last thing we need is yet another one ... well - I created one anyway ... because I wanted to and I had a lot of fun doing it :-). I tried to achieve the following…

Downloads
8,250
Likes
1,208
Rating
4.95

Miku Hatsune - Vocaloid - Anime Fanart Toy

PRESUPPORTED - https://social.thangs.com/m/57128 Hatsune Miku (初音ミク), codenamed CV01, was the first Japanese VOCALOID to be both developed and distributed by Crypton Future Media, Inc.. She was initially released in August 2007 for the…

Downloads
8,059
Likes
973
Rating
5

Mandalorian Darksaber Split by Color - Star Wars

The Mandalorian Darksaber model designed by Polymath314 is gorgeous and I wanted to print it with the right color filaments to avoid painting anything so I split it up. The biggest challenge was splitting up the vertical stripes to still…

Downloads
7,508
Likes
3,463
Rating
4.9
P
PrintablesDavid

VALORANT XENOHUNTER KNIFE

The Valorant Xenohunter melee knife is part of the Xenohunter Collection. This is a five skin bundle released on June 8th 2022 and includes melee knife, a Frenzy, Bucky, Phantom and Odin. Based on the Alien franchise, the weapon designs…

Downloads
6,703
Likes
438
Rating
4.73
P
PrintablesPrusa Guy

Mandalorian pistol

Original model “ The Mandalorian Blaster (Final Version) ” by Straekers_Armory you can find here: https://www.thingiverse.com/thing:3977528 If you’re a huge Star Wars fan then I’m sure you’ve already signed up for the new streaming…

Downloads
6,567
Likes
2,583
Rating
4.92
P
PrintablesHall Precision

Talon Utility Knife V2

A 2-piece 3D printable keychain utility knife. Tool free assembly Maintenance free 50% of blade edge is exposed (not just the tip) Snap or locking types available CAD files available (.step) for remixing purposes Locking Style Features a…

Downloads
6,202
Likes
1,055
Rating
4.78

Standalone Drybox, spool holder - with humidity sensor

Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor. Print instructions You can place five pieces of this drybox on the top of the Prusa Printer Enclosure V2. Can be used as a standalone spool holder for Original…

Downloads
5,131
Likes
693
Rating
4.73
P
PrintablesGrafit

Mandalorian Coin

This is a fanart replica of Jon Favreau's Mandalorian Challenge Coin. It was seen first in public at the D23 expo. The helmet artwork is by Rob Pauza who made the best Mandalorian props and you can find them on Myminifactory for free.

Downloads
5,048
Likes
707
Rating
4.96
P
PrintablesZachMods

Mandalorian Figurine | No Supports

This is an amazingly detailed model of The Mandalorian. This model requires absolutely no supports! The included Gcode has the best settings to get the perfect print with PLA. I didn't design this. It is a model that I have had for a…

Downloads
4,973
Likes
998
Rating
4.95
P
PrintablesQuizque

Jett's Kunai - Valorant

Modified from WF3Ds to fit the one from the game a bit more and to make painting a tad bit easier. Recommended printing vertically with supports (tree supports work wonders on this). NOTE: some printers can handle the overhang with no…

Downloads
4,957
Likes
486
Rating
4.89
P
PrintablesMr. MegaTronic

the American Craftsman Bungalow Birdhouse

the American Craftsman Bungalow Birdhouse! This birdhouse features two entrances, upper ventilation through the chimney and windows as well as sloped drains in the base to allow fluid to run out. There are multiple interior platforms…

Downloads
4,938
Likes
1,960
Rating
5

Halo Infinite Master Chief Helmet

Master Chief Helmet Made by Kolnic over on thingiverse at https://www.thingiverse.com/kolinc/designs , thought some people here would wanna print it, I have and it is an amazing very detailed. Sadly no remix for visor free version, but…

Downloads
4,904
Likes
456
Rating
5
P
PrintablesCobwebblox

Valorant Yoru mask

The agent Yoru (from the game valorant) ultimate mask. This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. https://www.riotgames.com/en/legal

Downloads
4,771
Likes
334
Rating
4.8
P
PrintablesMatyáš Flek

champions karambit valorant - FIXED-EASY

this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing

Downloads
4,716
Likes
222
Rating
5
P
PrintablesWiredEarp

Ender 3 V2 cable chain mount along with all other relevant V2 cable chain parts (no unscrewing required!)

This is a modified cable chain end mount for the Ender 3 V2, allowing the chains to be mounted so they run nicely parallel to each other and the printer. I've also added all the other bits you need to print a cable chain for the Ender 3…

Downloads
4,245
Likes
493
Rating
4.81
P
PrintablesJace1969

Halo Master Chief Full Boddy Armour

This is a remix of a number of Halo Suits but a derivative of the links below. Still a work in progress, but getting there. : ) Sorry the files are all over the place but I'm not a very good tidy file keeper. There may be double ups and…

Downloads
4,196
Likes
1,235
Rating
5
P
PrintablesOpenFigure3D

The Mandalorian Articulated Figure - Star Wars

THIS IS THE WAY. OpenFigure3D's latest fully 3D-printable articulated figure is here! Din Djarin "The Mandalorian ", from the Star Wars franchise series. It is multi-part so you can use different filament colors. You can also “paint it”…

Downloads
4,134
Likes
1,279
Rating
4.67
P
PrintablesEthansDad3D

Mandalorian (Baby Yoda) Christmas Manger Scene

Description With Christmas coming, and so many "Baby Yodas", I put together a Christmas manger scene starring our favorite characters from Disney+'s live action Star Wars series "The Mandalorian". I did a lot of clean up work on some of…

Downloads
3,917
Likes
592
Rating
5
P
PrintablestheStonefox

The Mandalorian - Contemplation Statue

A lone warrior sits in silence, armor worn by countless hunts across the Outer Rim. This is no triumphant pose… only a Mandalorian at rest, burdened by creed, contracts, and the weight of a galaxy that never stops taking. Bound by the…

Downloads
3,799
Likes
693
Rating
5
P
PrintablesMachineDynamics

Johnny Silverhand's Malorian Arms 3516

These files are for printing a replica of Johnny's pistol from Cyberpunk 2077. All parts were designed to be printed in resin. A mid size printer such as a Saturn or Mono X are required for some of the larger parts. The finished prop…

Downloads
3,710
Likes
534
Rating
5
P
Printables29flo

Mini Mandalorian Figurine

Mini Mandalorian Figurine Printed with fuzzy skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.15 Fuzzy Skin thickness: 0.15 If you're interested in the commercial use of my models, check the link to my Patreon…

Downloads
3,677
Likes
884
Rating
5
P
PrintablesJDO solutions

Marble track - Motorized Lift 2021 version (v4) - stand-alone height adjustable Gravitrax compatible!

Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…

Downloads
3,555
Likes
469
Rating
4.92
P
Printablesmiki

Mandalorian helmet

Remix of the “The Mandalorian” by ReProps . The helmet is resized to 20% of original to fit a barbie doll :) The size is cca 40x47x51mm now. The skin became too thin to reliably print so made it thicker by inserting inside the helmet…

Downloads
3,524
Likes
340
Rating
4.71
P
Printablesiczfirz

The Mandalorian Support Free Remix Pose 1/5

*** Yet another pose here: https://www.thingiverse.com/thing:4672484 Subscribe Now! A very good model from Velrock. Time-lapse print video : https://youtu.be/4lXVR1HwAAU Remix to support free and printed. (Updated to…

Downloads
3,508
Likes
657
Rating
4.9
P
PrintablesSzeez

CS:GO Talon Knife

This is my CS:GO talon knife made in fusion360 using in game images as reference. Here is a stand for it :> ← Update 2 !added decorated handles! one piece / multiple piece versions To assemble it with the old handles you will need three…

Downloads
3,506
Likes
417
Rating
4.79
P
Printablesiczfirz

Mandalorian Bust - Star Wars 3D Models - Support Free and No infill Remix

Total 3 stl. All support free. You can choose anyone if you print on resin while "FDM" means less overhang. Don't forget to post your made and sub my YouTube. *** Timelapse also feat. with Mandalorian Airbrush to Life by Michael Siller.…

Downloads
3,415
Likes
605
Rating
4.95
P
PrintablesHakunaMatata

Mandalorian no support

For some unknown reason, got messages from users saying the original post was deleted: https://www.printables.com/model/155361-mandalorian So I am re-posting it. I up-scaled it as much as I could, something around 25cm taller. 0.16…

Downloads
3,248
Likes
503
Rating
4.95

Ahsoka Tano's Lightsabers - Star Wars The Mandalorian

Here is my version of Ahsoka Tano's lightsabers from her live action debut in Star Wars The Mandalorian. These were based on reference photos of behind the scenes props and screen captures. The colors are interesting--the offhand body is…

Downloads
3,182
Likes
1,362
Rating
5
P
PrintablesMauriceR

Mandalorian hitch cover / Abdeckung für Anhängerkupplung

Found this model on thingiverse and did not found it here so to promote or attribute this artist here is the link to the original file https://www.thingiverse.com/thing:4871206

Downloads
3,158
Likes
350
Rating
4.92
P
PrintablesGrigi

Cyberpunk 2077 Johnny Silverhand's Malorian Arms 3516 screw assembly and more accurate details

Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful. Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a…

Downloads
2,838
Likes
823
Rating
4.71
P
PrintablesDirect Designs

Halo MkV Action Figure - Master Chief - MODULYR V3

Description; Halo Mk V Armor from Halo Infinite (ripped from in-game) adapted to an action figure using my MODULYR V2 action figure template. This is a 6 inch scale figure, with 22 points of articulation. It comes with a colored visor…

Downloads
2,673
Likes
685
Rating
4.27
P
PrintablesSuper 25

Mandalorian figure STAR WARS + Grogu

I decided to try it without support and it worked. I chose the brim around the legs for a better feel. I haven't tried it without it. In order to print successfully, it is important to have a well-aligned bed, a lower hotend temperature…

Downloads
2,586
Likes
330
Rating
4.94
P
PrintablesDan Sabau

UltraLock Zip Ties

UltraLock Zip Ties - not original, just to have them close

Downloads
2,563
Likes
1,016
Rating
4.78
P
PrintablesMatyáš Flek

mystbloom kunai valorant FIXED

this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing

Downloads
2,497
Likes
151
Rating
5
P
PrintablesMZ4250

Balor Updated

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
2,434
Likes
115
Rating
5
P
PrintablesTim O'Brien

sure.t mag- nerf half dart/talon magazine

Talon/half-length nerf magazine designed to be vertically printed in record time. Faster to print, more modular design, more compatibility, more customizability! Print this with 1 wall with a good PLA+ filament and it'll be a strong,…

Downloads
2,337
Likes
319
Rating
4.9