Search results: alter

Sort order

12,199 models

P
Printableskev

IKEA 365+ Lid Holder / Deckelhalter - 10 Slots

Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required

Print approx. €10.85–€13.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9,068
Likes
3,316
Rating
4.97
P
PrintablesAndiY82

Einhell Akku Wandhalterung

Einhell Akku Wandhalterung

Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,795
Likes
191
Rating
4.96
P
PrintablesGlennovitS 3D

Mood Mate (XYZ Calibration - Print-in-place cube alternative + mood changer!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant

Downloads
2,395
Likes
500
Rating
4.86
P
PrintablesAdRilUtiOn

Küchenrollenhalter / Kitchen roll holder

This is a simple kitchen roll holder. I have printed it in PLA. The parts should be glued together. Have fun :-)

Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant

Downloads
1,726
Likes
290
Rating
4.79
P
Printablesncsandor

Alternative Christmas Deer - Buck

His partner: https://www.printables.com/model/1473177-alternative-christmas-deer-doe Print Tips Material: AzureFilm - PLA Silk Gold Layerheight: 0.2mm Structural Support: No Infill: Grid

Print approx. €2.96–€3.62 excl. taxPreliminary estimate for one variant

Downloads
1,224
Likes
347
Rating
4.93
P
PrintablesDazus K

Christmas Ball - Alternating Diamonds

Here's a fun new Christmas ball that features alternating diamond patterns. The cover photo shows the same ornament photographed at two different angles. I printed it using a two color filament, so both the color and pattern shift as you…

Print approx. €5.47–€6.69 excl. taxPreliminary estimate for one variant

Downloads
1,061
Likes
351
Rating
5
P
PrintablesAllpa

Milwaukee M18 Heavy-Duty battery holder (High Demand & Forge) // Milwaukee M18 Akku-Halter (High-Output & Forge)

Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…

Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant

Downloads
980
Likes
97
Rating
5
P
PrintablesKlaus

Wall mount for type 2 plug and Juice Booster 2 (electro mobility) - Wandhalterung für Typ 2 Stecker und Juice Booster 2 (Elektromobilität)

You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…

Print approx. €6.62–€8.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
974
Likes
71
Rating
4.82
P
PrintablesPhilippHee

Drill Bits Holder / Bohrer-Halterung

Drill Bits Holder Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. --- Bohrer-Halterung Halterung für insgesamt 23 Bohrer mit einer Größe…

Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant

Downloads
762
Likes
61
Rating
5
P
PrintablesTimo

Stackable tea bag holder / Teebeutelhalter stapelbar

V2 is now available. Stackable tea bag holder Dimensions: 6.8 cm wide, 8 cm deep, 10 cm high +++++++++++++++++++++++++++++++++ Stapelbarer Teebeutelhalter Maße: 6,8 cm breit, 8 tief cm, 10 cm hoch

Print approx. €2.37–€2.89 excl. taxPreliminary estimate for one variant

Downloads
729
Likes
309
Rating
5
P
PrintablesSparrow Design

Kaw pendant alternative appearance

Print Tested with PLA. Print instructions I recommend 15% to set the fill. Supports need to be generated on the printer bed.

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant

Downloads
625
Likes
62
Rating
5
P
Printablesgrooveup

Prusa MK3S+ Druckblechhalterung, Prusa MK3S+ Steel plate holder

Prusa MK3S+ Druckblechhalterung, Prusa MK3S+ Steel plate holder

Print approx. €4.93–€6.02 excl. taxPreliminary estimate for one variant

Downloads
622
Likes
71
Rating
5
P
Printablesangel618

Tablet Stand / Tablet Halterung - breite variabel

Tablet Stand / Halter in der Breite variabel - kann im Slicer einfach breiter gezogen werden. Von mir in der Breite 10cm gedruckt. Material ASA schwarz Bitte postet eure Makes - würde mich sehr freuen. Danke

Print approx. €11.17–€13.65 excl. taxPreliminary estimate for one variant

Downloads
578
Likes
18
Rating
5
P
PrintablesSuper-KAP

Aufbewahrungs Kontainer mit Wandhalterung, Stapelbar / Storage container with wall bracket, stackable

Aufbewahrungs Kontainer mit Wandhalterung, Stapelbar. Organisiere dein Alltag und bringe ordnung in dein Leben. Es werden zum Beispiel solche Schrauben benötigt: https://amzn.to/41Z0I4K --------------- ENGLISH -------------- Storage…

Print approx. €4.64–€5.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
543
Likes
53
Rating
5
P
PrintablesLinuTec

Schrittmotorhalter Nema17 / Stepper motor mount Nema17

Schrittmotorhalter Nema17 / Stepper motor mount Nema17

Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant

Downloads
479
Likes
37
Rating
5
P
PrintablesCouchPrinter

Fritzbox Halterung für 7590 / 7590AX

UPDATE 2025-08-21 Based on some reviews and comments, I've revised the models and this time separated the models for the 7590 and 7590AX. I've moved the mount for the 7590 slightly. I removed the covers from my cabinet and my neighbor's…

Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant

Downloads
479
Likes
14
Rating
4.5
P
PrintablesDaveDude

Müllbeutelrollenhalterung (Gelber Sack, k-classic Müllbeutel) - German Trash Bag Holder for Bio, Yellow, Black and Bathroom

This print is adjusted to the size of german yellow trash bags and to the cheap trash bags from Kaufland brand. -- Tolle Lösung, um Platz in den Schubladen zu sparen! Optimiert für Kaufland Müllbeutel und dem Standard-Gelbensack. Restmüll…

Print approx. €3.46–€4.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
474
Likes
75
Rating
5
P
Printablestille

Frosterfach-Offenhalter für Thetford-Kühlschrank N4142E + Version 2

Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…

Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
458
Likes
40
Rating
5
P
Printablesrolleroll

Sodastream Halter für Glasflaschen // Sodastream holder for glass bottles

Sodastream Halter für Glasflaschen zum austrocknen. stabil / Standfestigkeit hoch / schlichtes Design Sodastream holder for glass bottles to dry out. stable / Stability high / simple design Print instructions Printer brand: Prusa Printer:…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant

Downloads
430
Likes
41
Rating
4.91
P
PrintablesJoerg B.

Halterung / Standfüße für FritzBox 7590 AX

Ergänzung 11.01.2024 Habe eine Ausführung mit Aussparungen für den TAE und USB-Anschluss hinzugefügt. Diese habe ich nicht getestet. Bitte um Feedback, wenn es nicht passt!!!

Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant

Downloads
407
Likes
23
Rating
4.5
P
PrintablesMaWoKo_3D_Druck

IKEA Skadis Halter Imbus / Sechskant Schlüssel

Ein einfacher Nimbus Sechskantschlüssel Halter für die Skadis wand

Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant

Downloads
377
Likes
39
Rating
4.8

Quadratischer Stiftehalter – Ordnung auf Ihrem Schreibtisch

Beschreibung Dieser praktische Stiftehalter ist perfekt für Schreibtisch oder Werkbank und sorgt dafür, dass Stifte, Marker oder andere Schreibutensilien ordentlich aufbewahrt werden. Der Stiftehalter ist 96 mm hoch und hat eine Breite…

Print approx. €6.83–€8.35 excl. taxPreliminary estimate for one variant

Downloads
372
Likes
24
Rating
4.67
P
Printablesncsandor

Alternative Christmas Deer - Doe

Her partner: https://www.printables.com/model/1106795-alternative-christmas-deer-buck/files Print Tips Material: Sunlu - Silk Silver PLA Layerheight: 0.2mm Balanced Support: No Infill: Grid

Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant

Downloads
371
Likes
97
Rating
5
P
PrintablesBayerwald

Stihl Motorsägenhalter / Kettensägenhalter Wandhalterung

Ein Model zum Aufhängen der Stihl Motorsäge an der Wand Material: PLA Füllung: 15% (Gyroid) Schichtdicke: 0,2mm Getestet bei der Stihl MS 171, MS 241, MS 661

Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant

Downloads
367
Likes
23
Rating
4.67
P
Printablesfaw3b

Alternative Plate for Modern Spiral Planter

An alternative plate for the modern spiral planter by SchulteGeileTechnik. Like and download his awesome model and leave a like as well. My print is larger version of the original. Therefore the plate has a inner diameter of 73 mm. It…

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
332
Likes
57
Rating
4.5
P
PrintablesRincewind76

Worx Landroid Alternative Tires

Our Worx Landlord m500 tends to not only cut the lawn, but also dig new holes with the tires. In difficult situations the mower does not recognize that it is not turning - and uses a brute force move. Therefore I designed other wheels,…

Print approx. €13.04–€15.94 excl. taxPreliminary estimate for one variant

Downloads
327
Likes
24
Rating
5
P
PrintablesMadmission

FIAT 500 GPS Blue&Me Mobile Halterung

Es wird ein Magnet benötigt, wie im Link oder ähnlich.…

Print approx. €2.11–€2.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
321
Likes
12
Rating
5
P
PrintablesLomyr

Laptophalterung | Ständer für Laptops bis 21,5mm breite

Laptophalterung um den Laptop stehend am Schreibtisch zu positionieren. Das Hauptmodell habe ich von FizulNizam | Printables.com Wollte noch etwas Material und Zeit vom Ausdruck sparen und vielleicht noch etwas an 3D gewinnen. Breite…

Print approx. €5.37–€6.56 excl. taxPreliminary estimate for one variant

Downloads
286
Likes
28
Rating
4.6
P
PrintablesAlvomane

Prusa XL Front Nozzle Purge Wiper for Bambu Lab A1 (not mini!) Silicone Brush | Prusa XL Fronthalter für A1-Silikonbürsten

Update 19.10.2024: EN Notice: Since I remixed my Front Nozzle holder before the release of Krys own A1 version, it is compatible with Krys ‘A1 mini’ purge catch tray. So please combine my A1 remix with Krys PrusaXlFrontNozzlePurgeA1Mini…

Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant

Downloads
283
Likes
78
Rating
4.8
P
Printableso._sim_.o

Mobula 8 Alternative Battery Mount

The stock battery mount on the Happymodel Mobula 8 likes to break after some not-so-soft landings and snaps where the two crossbars connect to the side of the battery holder. This model replaces the crossbars and hooks into the sides of…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
276
Likes
20
Rating
5
P
Printablespebi

Mountainbike Sattelhalterung Rücklicht

Mountainbiker, deren Bike mit versenkbarer Sattelstütze ausgerüstet ist, kennen das Problem, wohin mit dem Rücklicht? Viele Rücklichter sind dafür ausgelegt, am Sattelrohr befestigt zu werden, das schränkt natürlich die Handhabung der…

Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant

Downloads
264
Likes
18
Rating
5
P
PrintablesDennis

Würth Akku Wandhalterung/ Self-Locking Wall Mount for Drilling battery

This Model is designed to be mounted on different surfaces with M4-screws. It also has a self-locking-mechanism.

Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant

Downloads
262
Likes
14
Rating
5
P
PrintablesNozzle

Gartenzaun "Doppelstabmatte" Halterung für Schilder

Eine Halterung für das Verschrauben von Schildern oder anderen Dingen an einem Doppelstabmattenzaun.

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
256
Likes
28
Rating
0
P
PrintablesAlvomane

Revopoint Dual-Axis Turntable Holder for Nano Vise 2.0 and Nano Chuck / Revopoint DATT Halter für Nano Vise 2.0 und Nano Chuck

Here is an adapter for mounting the very popular miniature vice “Nano Vise 2.0” as well as the “Nano Chuck” by PRima (remix of mdkendalls “2.5 Inch Three Jaw Chuck” ) on the Revopoint Dual-Axis Turntable. The holder can be attached to the…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
244
Likes
64
Rating
5
P
PrintablesKonner

Getränkehalter

Zum sicheren halten von Gläsern, Flaschen, Dosen etc. an Geländern. Für Geländer aus Quadratrohr mit 40x40mm. Mit Bohrungen im Boden, sodass sich kein Wasser, Dreck, Regen etc. sammeln kann. PETG mit 25% Infill sind ganz gut

Print approx. €15.77–€19.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
240
Likes
9
Rating
0
P
PrintablesKlaus

Einhell Agillo Cordless Scythe wall mount / Wandhalterung Akku Motorsense

This wall mount is designed for Einhell Agillo 36/255 and the original accessories and tools, but may also fit for other scythes. I used PETG, 3 perimeters and 0,2 layer height. Happy printing!

Print approx. €7.76–€9.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
238
Likes
24
Rating
5
P
Printablesm7cw5l

Wandhalter für Gasflaschenkappe / Wall bracket for gas cylinder cap

Dieses Modell ist ein Wandhalter für eine Gasflaschenkappe, wie sie bei den klassischen 5 kg und 11 kg Gasflaschen (Camping, Gasgrill, …) verwendet wird. Ich habe ein Modell mit und Eines ohne Schraublöcher hochgeladen, dann ist man bei…

Print approx. €1.31–€1.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
233
Likes
17
Rating
4
P
PrintablesJKampp

Cigarette pan-flutes (smoking alternative)

Pitch: Is your friend, coworker, or family member smoking? Would you like them to stop? It's easy! Just replace their smokes with these revolutionary therapy props. They will totally not hate you! Why did I do this?: No seriously, I made…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
229
Likes
75
Rating
0
P
PrintablesMarkus Eissler

xTOOL S1 Filterhalter-Griffkombi / NEUE VERSION 2025-02-12 +++ xTOOL S1 Filter Holder Handle Combi / NEW VERSION 2025-02-12

Auf der Suche nach einem Filterhalter und einem Griff für den 40W Laserkopf, bin ich zwar mehrfach fündig geworden, nichts davon gefiel mir so richtig, daher konstruierte ich eine Kombination aus beidem. Es gibt ein Oberteil, in das ich…

Print approx. €1.56–€1.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
217
Likes
21
Rating
5
P
Printablestom

Lötkolbenhalter für Einschmelz-Gewindeeinsätze/ Soldering Iron Holder for Melt-In Thread Inserts

Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…

Print approx. €6.54–€7.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
216
Likes
25
Rating
5
P
PrintablesSound-Maker

Schalterauslöser / Switch Trigger Makita DMP181Z / 180Z

Ich fand das tolle Design von FrankBer sehr nützlich und habe es an meinem neuen Kompressor DMP181Z getestet. Auch an diesem Gerät funktioniert es einwandfrei. Ich habe das Design ohne Schlauchschelle modifiziert, da am DMP181Z bereits…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
211
Likes
14
Rating
5
P
PrintablesP3c1

Rat Rig V-Minion - alternate MCU + PI Case

This box is made for the BTT sk2 and the PI 3 A proposed by Rat Rig in the full kit. You can reuse the 4010 fan and the Cable passthrough part. to assemble you need brass inserts for 3mm screws. Also to have a more compact machine I use…

Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
209
Likes
40
Rating
5
P
Printablesalvier

Aldi Akku Halter

Ferrex Aldi Akku Halter

Print approx. €5.25–€6.42 excl. taxPreliminary estimate for one variant

Downloads
197
Likes
13
Rating
5
P
PrintablesCorny87

qeridoo Laufradhalter balance bike holder

Ein Halter für das Laufrad der Kinder

Print approx. €3.41–€4.16 excl. taxPreliminary estimate for one variant

Downloads
194
Likes
14
Rating
5
P
PrintablesLuis

Original Prusa i3 MK3 ENCLOSURE silent spool holder with bearings and tires / Spulenhalter mit Kugellagern und Reifen

***german version below*** I really liked the versatility and simplicity of the original spool holder design od the Prusa Lack enclosure. But it had two disadvantages. It was quite noisy and it streched flex filament quite heavily while…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
193
Likes
33
Rating
4.8
P
PrintablesDerMacher

Wachteleihalter stapelbar / Quailsegg stand

Ein stapelbarer Wachteleihalter (12St.). Schnelle Druckzeit, keine Stützen und nur wenig Material nötig. A stackable quail egg holder (12). Fast print time, no supports and only little material needed. Verbesserungsvorschläge sind…

Print approx. €2.44–€2.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
190
Likes
20
Rating
5
P
PrintablesF Engineering

Blanco Select Soft-Close Dämpferhalter

DE: Einfaches Ersatzteil für ältere Blanco Select Müllsysteme mit Soft-Close Funktion. Die Stützstrukturen an den Ecken sind in diesem Fall sinnvoll um ein besser Passform zu ermöglichen. Als Material empfehle ich PETG um vorzeitigem…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
190
Likes
6
Rating
5
P
PrintablesRealPrint

(Wand) Halter für die 5690 pro / (Wall) mount for the 5690 pro

Halter für eine 5690 pro. Bohren: Lochabstand 22 cm Neu (3.25): Version mit mehr Wandabstand für Glasfaser-Anschluss Mount for a 5690 pro. Drilling: hole spacing 22 cm New (3/25): Version with more wall clearance for fibre optic connection

Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant

Downloads
187
Likes
9
Rating
5
P
Printablesdmacnulty

Air Spinner by walter

Air Spinner by walter on Thingiverse : https://www.thingiverse.com/thing:2823006 This is model is provided as a default within Snapmaker's Luban slicer when your Snapmaker has the dual printing module. I printed in a few different sizes…

Print approx. €5.13–€6.27 excl. taxPreliminary estimate for one variant

Downloads
183
Likes
19
Rating
5

Papier Rollen Halter

Dies ist ein einfacher Papierrollen halter für Werkstatt oder Küche

Print approx. €5.07–€6.19 excl. taxPreliminary estimate for one variant

Downloads
180
Likes
15
Rating
0
P
PrintablesAku

Cubitos Würfelhalter | Dice Box

Alternativer Würfelhalter für das Brettspiel Cubitos Alternative dice box for the boardgame Cubitos

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant

Downloads
176
Likes
27
Rating
4.8
P
Printablestom

Halterung für eine Kleiderstange/ Bracket (Holder) for a clothes rail

Nachdem eine Halterung unserer Kleiderstange zerbrochen war, lagen die gesamten Kleidungsstücke unten im Kleiderschrank. Das passiert natürlich an einem Sonntag, alle Geschäfte sind geschlossen und wir wissen nicht, ob es überhaupt Ersatz…

Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
171
Likes
19
Rating
5
P
PrintablesAlexa3D

Spiegelhalter | Mirrorholder Opel Rocks E Fiat Topolino Citroen Ami

Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…

Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant

Downloads
170
Likes
9
Rating
0
P
PrintablesBM

Extra-wide lens hood Canon EW-73D alternative

The hood is not visible on the photos. The fuzzy skin gives a nice touch to the look. Printed in ABS-T to withstand the sun. Amternative to Canon EW-73D compatibel with RF 24-105mm F4-7.1 IS STM. Not tested on EF-S 18–135mm f/3.5–5.6 IS…

Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant

Downloads
170
Likes
12
Rating
0
P
PrintablesChris Ne

BIKEMATE Adjustable bike light mount with Bikemate Mount / Justierbare Fahrradlicht - Halterung mit Bikemate Mount

Edit V2 28.7.2023: Eine bessere Version des Oberteils wurde mit besserer Passung und stabileren Hebel hinzugefügt. A better version of the top has been added with a better fit and more stable lever. I built a new bike light mount for my…

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
14
Rating
0
P
PrintablesMultisystem

Multisystem Alternative Lid - PSX

This enclosure lid fits the Multisystem V5/V6 (2022/2023) console. It uses the same base but has a new lid, backplate, SDcard mount and reset button. You can now make your Multisystem console into the style of classic consoles, this ones…

Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant

Downloads
164
Likes
28
Rating
5
P
PrintablesHelle

Halter für Filament Rollen 1 kg - alle Marken

Ständer und Halter für Filament bis 1 kg alle Hersteller

Print approx. €5.49–€6.71 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
12
Rating
0
P
PrintablesBernd

6-fach o. 12-fach Bithalter für Bosch Professional Akkuschrauber GSR12V35FC

Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung

Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
156
Likes
32
Rating
5
P
Printablesangel618

Brodit Auto Halter - iPhone 13 mit Schutzhülle "Torras" 12mm

Gedruckt in ASA (wegen der Temperaturen im Auto) mit Stützen, Schürze und BRIM. passend auf so einen Brodit Halter:…

Print approx. €4.49–€5.49 excl. taxPreliminary estimate for one variant

Downloads
155
Likes
10
Rating
5
P
Printablesgex

Wavy Pen Cup (Vase Mode) with alternate models

Details After my first vase model I wanted to create something with a finer pattern. This time I used some spheres to emboss/deboss the surface. I played a bit with the radius of those spheres and it produced this wavy pattern. Dimensions…

Print approx. €2.01–€2.45 excl. taxPreliminary estimate for one variant

Downloads
153
Likes
27
Rating
0
P
PrintablesvmLOGIC

Toilettenpapierhalter mit Reserverollen / toilet paper holder with spare rolls

Für die Grundkonfiguration mit einer Reserverolle sind folgende Modelle erforderlich: The following models are required for the basic configuration with one spare roll : 1 x Rollenhalter 1 x L-Form oben links 1 x L-Form oben rechts 1 x…

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
49
Rating
0
P
PrintablesMAHWE

Ortlieb Fahrrad Taschen Halter

Fahrradtaschen Halter für z.B. Ortlieb Taschen. Ausgelegt für 10mm Rohrhalter.

Print approx. €8.10–€9.89 excl. taxPreliminary estimate for one variant

Downloads
147
Likes
29
Rating
0
P

Garden Hose Holder / Gartenschlauchhalter

Used print settings: Place model on the side that faces the wall after mounting PETG with 20% infill (may want to use 25% or more for the hook)

Print approx. €3.77–€4.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
145
Likes
25
Rating
5
P
PrintablesHeikit

Modern tealight holder small and large - Moderner Teelicht Halter klein und gross

max 39mm / 59mm tealights Minimal filament consumption thanks to compact design Minimaler Filamentverbrauch durch kompaktes Design See also my egg cups in similar design Eierbecher in ähnlichem Design…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
142
Likes
22
Rating
5
P
Printables3dprints4life

Shelf Bracket Drywall Construction / Konsole - Regalhalter Trockenbauwand 17cm x 17cm

EN: The bracket is suitable for mounting 20 cm wide shelves on drywalls. M5 dowels can be used as cavity dowels. The hole can be subsequently extended for larger M6 dowels. If you like my model(s) please leave me a like to support my…

Print approx. €5.07–€6.20 excl. taxPreliminary estimate for one variant

Downloads
140
Likes
18
Rating
5
P
Printablesmagarbl4

Prusa Core One Griff Halterung

Prusa Core One Türgriff-Halterung (verstärkte Version mit M3-Verschraubung) Beschreibung: Am ersten Tag der Nutzung meines Prusa Core One ist der Türgriff abgefallen. Die Originalbefestigung war nicht stabil genug. Deshalb habe ich eine…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
137
Likes
36
Rating
5
P
PrintablesFrankti

Halter Tenways Ladegerät Ebike alte und neue Version

Der Halter passt zu Tenways Ebike Ladegerät für das alte und neue Genneration er kann an der Wand befestigt werde oder auch mit Kabelbindern an diversen Objekten.

Print approx. €4.11–€5.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
134
Likes
6
Rating
5
P
PrintablesSebastian

Druckplatten Halter

Plattenhalter für 3 Druckplatten

Print approx. €7.13–€8.71 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
6
Rating
0
P
PrintablesLinuTec

AnyCubic Photon Mono X 6k Halter / Anycubic Photon Mono X 6k Build Plate Hanger

AnyCubic Photon Mono X 6k Halter / Anycubic Photon Mono X 6k Build Plate Hanger

Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant

Downloads
131
Likes
12
Rating
0
P
Printablesbaua1356

Modularer, magnetischer Stiftehalter / Stiftebox

Ich biete euch hier einen modularen, 3 tlg. Stiftehalter für euren Schreibtisch. Die Magnete sind in der ersten Version nur in der Mitte, in der V2 sind es zwei je Seite. Die Magnete sind 5x1,5mm groß. Es sind aber auch die 3D Modelle zum…

Print approx. €9.32–€11.39 excl. taxPreliminary estimate for one variant

Downloads
130
Likes
19
Rating
5
P
PrintablesCockatielprints

Fernbedienungshalter für die Bettkante

Sollte für die meisten gängigen Samsung Fernbedienungen passen

Print approx. €6.30–€7.70 excl. taxPreliminary estimate for one variant

Downloads
130
Likes
14
Rating
0
P
PrintablesMarkus_94

Univeral kitchen scale holder / Universeller Küchenwaagenhalter

Aufnahme für Küchenwaage unterm Regal/Schrank

Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
128
Likes
16
Rating
0
P
PrintablesBucksDanny

Alternative holders with sliding door latch, no magnets required

Designed a dual holder system to secure the side storage in place without magnets and lock the door with a latch as it keeps opening from vibrations. Requires machine screws (4x 5mmx2.5mm) or 4x M3x10mm allen bolts to mount. Remove 4…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
49
Rating
5
P
PrintablesMaWoKo_3D_Druck

Der Brillofant Brillenhalter Schreibtisch

eine schöne alternative zum ewigen Brille such ja wo liegt sie den zum ja meine Brille ist auf dem Elefanten gedruckt mit 15 % infill und einer 0,4 nozzel ist der Elefant in es knapp über einer stunde beim MK4S gedruckt. Habt spass damit…

Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant

Downloads
120
Likes
11
Rating
5
P
Printablesredaeq

Bowden/PTFE AMS Lite Mount/Holder/Halterung für Bambulab A1 / A1 Mini

Nachdem es mein Bowdenzug vom AMS Lite geschafft hat den Pause Knopf auf dem Display zu betätigen habe ich diese Halterung gebaut. Schön ist die nicht, aber sie erfüllt ihren Zweck ohne irgendwas an den Drucker selbst anzubauen. Das eine…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
120
Likes
22
Rating
3
P
PrintablesAlphaSco

Trash bag roll holder Wandhalterung für Müllsackrollen

I have uploaded 2 versions: WallMountTrashBag_ScrewHoles - for mounting it with screws. The holes have a diameter of 4mm WallMountTrashBag_Adhesive - for mounting it with adhesive tape / double sided tape Here's what I had in mind while…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
120
Likes
44
Rating
5
P
PrintablesManü

Cuttermesser Halter / Utility knife holder

Einfache Halterung für Cuttermesser und/oder Ersatzklingen. Ich habe mehrere Modelle abgelegt. Man benötigt noch 2 Schrauben der Größe 3,5 mm zur Befestigung. Simple holder for cutter knives and/or spare blades. I have put down several…

Print approx. €5.90–€7.21 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
4
Rating
0
P
PrintablesMaWoKo_3D_Druck

Advent Tischkerzenhalter, Weihnachten / Advent table candle holder, Christmas

Eine für die Adventszeit gedachte Tischdeko, gedruckt mit 15% innfill und stützen auf dem Druckbett. Über likes makes und follower würde ich mich sehr freuen, Peace MazZe

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
108
Likes
18
Rating
4.5
P
PrintablesStefan R

Box Wrench Holder / Halter für Ringschlüssel

I tried different wrench holders and found none of them satisfying so I made my own. Fits 8 metric box wrenches and hold them in place, the right thing for my tool box or drawer. I made also a model for combination wrenches . Happy…

Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
106
Likes
8
Rating
0
P
PrintablesHans

Dartpfeilhalter/ Holder for darts

Halterung um Dart pfeile ordentlich aufzubewahren gerne Makes hinzufügen! Auch eine Multicolour Datei dabei um verschiedene Farben unterzubringen.

Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant

Downloads
105
Likes
4
Rating
0
P
PrintablesMek

Pot lit holder / Topfdeckelhalter

Pot lid holder with spoon rest and drip tray. Alternative: with pillar made of aluminum tube 40x10x150mm. Topfdeckelhalter mit Löffelablage und Auffangwanne. Alternativ: Mit Säule aus Aluminiumrohr 40x10x150mm.

Print approx. €1.66–€2.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
104
Likes
18
Rating
5
P
PrintablesChristian

Lampenhalterung Fahrrad / Bicycle flashlight Mount

English below. Halterung für eine Taschenlampe mit Durchmesser 30 mm, und Lenkerdurchmesser von 31,8 mm (1 1/4 Zoll). Es wird zusätzlich benötigt: Senkkopfschraube M3x30 Senkkopfschraube M3x15 selbstsichernde Mutter / Stoppmutter M3, 2…

Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant

Downloads
103
Likes
46
Rating
0
P
PrintablesBrummy

IKEA BEKANT Desk Floor-Wall Spacer/ Abstandshalter Ikea Bekant

Auf Laminat stehen die Schreibtische nicht am Platz. Gerade bei der Höhenverstellung ist ein Abstand zur Wand wichtig . Das ist ein Abstandshalter für Ikea Bekant, passt wohl auch auf andere Schreibtische Breite Innenmaß 80 mm. Vorne ist…

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
17
Rating
5
P
PrintablesFokieH

Makita DUM6004 Wandhalter / Wallmount

Eine Wandhalterung um die Makita Grasschere DUM604 aufzuhängen. Bringt Ordnung in die Werkstatt. Ich habe den Halter in PETG ohne Support Material gedruckt. Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like…

Print approx. €3.47–€4.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
101
Likes
11
Rating
0
P
PrintablesAeonfly

Schnapshalter / Shot Holder

Als Geschenk habe ich diesen Schnapshalter im Feuermelder Design erstellt. Die Halterung im inneren ist für einen kleinen Klopfer der Firma Jägermeister ausgelegt. Zum zusammenbauen benötigt ihr: -8x Magnet 5mm x 1mm - Plexiglas mit den…

Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
27
Rating
5
P
PrintablesJulian21

Handyhalter für iPhone 12/13 mini

Der Handyhalter ist mein erster 3D-Entwurf, dennoch finde ich, dass er mir gut gelungen ist. Die zweite Version verfügt über eine Aussparung für die Kamera, eine raue Oberfläche auf der Vorderseite und eine mit Hexagonen bemusterte…

Print approx. €15.98–€19.53 excl. taxPreliminary estimate for one variant

Downloads
100
Likes
12
Rating
0
P
Printablessilasborowy

Pipersberg Gaszähler Sensor Halterung

Mit diesem Druck kann ein Magnetsensor optisch ansprechend an einem Pipersberg G4 Gaszähler befestigt werden. Der Druck enthält eine Mulde im Boden, die mittig über der zweiten Nachkommastelle angeordnet ist. Um den Zähler auszulesen muss…

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant

Downloads
100
Likes
6
Rating
5
P
PrintablesUli H.

Prusa MK3S+ Druckblechhalterung, Prusa MK3S+ Steel plate holder

Beschreibung: Ich wollte eine Möglichkeit meine drei Stahlbleche (PEI, Satin, Pulver) in meinem Druckergehäuse aufbewahren. In meiner Prusa Stahlblechhalterung befindet sich Platz für drei Stahlbleche. Das Spaltmaß für die Aufnahme der…

Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
11
Rating
5
P
Printablesalvier

Spoolholder for prusa spool Spulenhalter für Prusa-Filamentspulen

Spulenhalter für Prusa-Filamentspulen - es werden zusätzlich 2 Kugellager vom Typ 608ZZ benötigt. Diese gibt es auf Aliexpress günstig. Typ 608ZZ AD22mm, ID 8mm, Höhe 7mm

Print approx. €6.79–€8.30 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
6
Rating
0
P
PrintablesBackPapier01

Mikrofonhalter HyperX QuadCast

Gedruckt mit Ender 3 V2 Nozzel: 210 Bed: 60 Speed: 50mm/s Infill: 40% Gyroid Material: Geetch PLA

Print approx. €5.31–€6.48 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
10
Rating
0
P
Printablestom

Filamentspulenhalter für Prusa MK-Drucker/ Filament spool holder for Prusa MK printers

Diese Halterung für die Filamentspulen wird auf den Rahmen des MK-Druckers montiert, so dass die Spule in der Querrichtung des Druckers liegt. Ich benutze diese Halterung hauptsächlich für TPU-Filamente, da meine übliche Halterung oft…

Print approx. €3.30–€4.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
99
Likes
10
Rating
5
P
PrintablesKevin

Wandhalterung Schallplatten Haken multifunktion

Wandhalterung für Schallplatten, auch für andere Gegenstände nutzbar. Supports needed!

Print approx. €3.31–€4.04 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
6
Rating
0
P
Printablestonytoz

Universelle Halterung für Kinderfahrrad und Laufrad am Lastenrad

Bike Hook for Cargo Bikes (Inspired Design) This is a 3D-printable S-shaped hook designed to hold small bikes or balance bikes on the outside of a cargo bike. The design is inspired by commercially available cargo bike holders , but fully…

Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
93
Likes
6
Rating
0
P
PrintablesMaBaTaBa

VW up! 1.0 Adapter für Handy-Halterung (z.B. Brodit 711083)

Adapter für die integrierte Navi-Halterung (VW Teilenummer 150 035 936 A) des VW Up! 1.0 Passend z.B. für Brodit 711083 Passiv Holder mit Drehfuß für Apple iPhone Befestigung auf dem 3D-Druck Teil: mittels selbstschneidender Schrauben Je…

Print approx. €1.27–€1.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
93
Likes
2
Rating
5
P
Printables3D-Print Brehm

IKEA 365+ Drybox PRUSAMENT-Rollen-Halter (2 kg Rolle)

Wie schon für zwei 1 kg PRUSAMENT-Filamentrollen, jetzt auch für die 2 kg Filamentrollen. Viel Spaß beim Nachdruck und Grüße aus Ringsheim Sven Brehm

Print approx. €1.73–€2.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
89
Likes
13
Rating
0
P
Printablesjoxoo

Prusa Enclosure V2 - MMU2S Netzteilhalter

Prusa Enclosure V2 - MMU2S Netzteilhalter Außen Netzteil leicht abnehmbar

Print approx. €5.84–€7.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
87
Likes
16
Rating
5
P
PrintablesMultisystem

Multisystem Alternative Lid - Genesis / Megadrive v2

This enclosure lid fits the Multisystem V5/V6 (2022/2023) console. It uses the same base but has a new lid, backplate, SDcard mount and reset button. You can now make your Multisystem console into the style of classic consoles, this ones…

Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
17
Rating
0
P
PrintablesCrash343

Halterung Kleiderstange

Mit diesem Teil kann eine Kleiderstange mit Durchmesser von 20mm befestigt werden. z.B. in einem Kleiderschrank. This part can be used to attach a clothes rail with a diameter of 20 mm, e.g. in a wardrobe.

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
81
Likes
8
Rating
4
P
PrintablesBobbyTv87

Filament Rollenhalter

Für Filament Rollen für Anycubic Kobra, mit einem innen Durchmesser von 75mm Rollenhalter Masse: Außendurchmesser: 75mm Innendurchmesser: 40mm Länge: 90mm

Print approx. €7.07–€8.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
80
Likes
7
Rating
0
P
Printablesoltas

Shelly Plus 2PM Hausing with 2 microswitches to control blinds / Gehäuse mit 2 Microschaltern zur Rollosteuerung

Shelly Plus 2PM Gehäuse mit Bedienelementen um vorhandenen Schalter zu ersetzen. Shelly Plus 2PM Housing with buttons

Print approx. €4.59–€5.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
79
Likes
8
Rating
0