Patterned Pedal Face for Fanatec CSL Pedals
Holes a 4mm wide You will need a 4mm bolt and nuts. Bolt should be 20mm long as the pieces when assembled are 15mm thick. Should look amazing if resin printed. Enjoy!!
- Downloads
- 438
- Likes
- 47
- Rating
- 0
413 models
Holes a 4mm wide You will need a 4mm bolt and nuts. Bolt should be 20mm long as the pieces when assembled are 15mm thick. Should look amazing if resin printed. Enjoy!!
Mount for Fanatec DD PSU to tidy up a sim rig. Slide from an extremity of the alu profile; no fasterner needed. Easy removal of the PSU as it is not hold tight - only suitable for horizontal mount of the PSU. Easy print in PLA with 15%…
🎮 Introducing the 3D Printed Wheel Holder designed specifically for the Fanatec Quick release Wheels, a must-have accessory for every serious sim racer's setup. Crafted with precision and functionality in mind, this wheel holder…
Shifter magnets for Fanatec Formula wheels. Available in two variants, 6mm magnets for light actuation, and 8mm magnets for heavy actuation. Required Hardware: (4) 6 x 2mm disk magnets OR (4) 8 x 2mm disk magnets (4) M3 x 5mm countersunk…
Of course there are several other Mag-Shifter Mods out there, but one of the main issues i had with them: They all relied on glueing magnets to the plastic. Which i think is neither nice to look at, nor very long term stable. Since these…
I've designed this “formula inspired” race wheel to fit the larger (70mm diameter) screw pattern on the Fanatec CSL Universal Hub V2, while wrapping around the buttons to provide a comfortable, but customizable steering experience. Neat…
This is a solution to easily and quickly switch between a Wheel and two ipads Mini 4 on a simrig. The holepattern to fix it to the simrig is 4040 (most commenly used to build Simrigs) I use this to switch between simracing and playing…
Was learning fusion 360 so I wanted to have a go at creating a set of magnetic shifter upgrades for my ClubSport Formula wheel rim. It's a Remix of thing:4053974 but redesigned and redrawn to shave off some mass and print time whilst…
You need 1x screw m5x15 1x screw nut m5 Print base with suport.
A wall mount for Fanatec QR2. Not an exact copy of the base-side part (measured by caliper), but fits very well. Fix: fanatec_qr2_wall_mount and fanatec_qr2_wall_mount_indication No support is needed.
Update 21.11.2023: @SennedeValk_905437 spotted a small mistake in the body_82 part (thanks!). The mount for the qr part is not centered, it is slightly moved to the right. I'll fix this as soon as possible. I really liked the look of the…
This is a mount I designed to mount my spare wheel to my bookcase when I’m not using it. I copied the design on the hookup on the DD Pro Wheel Base so any wheel that will go on it should work on the mount. UPDATE: I just added a 8020…
Die Caps haben eine -0.01mm Prägung so das man im Slicer die Flächen mit einer anderen Farbe versehen kann. Drucker: Bambu Lab X1C 0,2mm Layerhöhe 0,4mm Düse - 0,2mm Düse ist dann Perfekt Euer Drucker sollte sehr genau drucken damit das…
Uses two M8 x 20mm. Print at 20-25%. Designed based on the Fanatec QR2 non-pro mount. Compatible with Pro and regular version, but not lite version. Inspired by this model (for QR1): https://www.thingiverse.com/thing:4803197 OnShape…
Mounting solution for the Boost Kit 180 (8nm) power brick for the Fanatec CSL DD & DD PRO to Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts The Series 15 that I modeled the mounting to is from tnutz.com and…
As I've not liked the short travel of the brake pedal, I've created an elastomer replacement. I've printed it in different hardness TPUs with 4 perimeters and different infills with a 0.4mm nozzle and replaced two of the original…
Simple Pedal Mod for CSL Pedals. (TPU for sound damper required) Review of this mod: Thanks to Sim Racing Corner You need 4x M6 60mm Bolts and 4x M6 Nuts and a set of RC Car Damper with 140mm length like these:…
A very rigid Streamdeck MK2 mount for a Fanatec wheelbase. Tested with a CSL DD, but any Fanatec wheelbase with T-nut mounting slots on the side should work. Additional parts needed: 3x M4xL4xD6 knurled nut insert 3x M4x12 bolt (a little…
Inspired by other creators, namely @bobby, I created what I felt was a more sturdy wall mount for my Fanatec wheels. I wanted the base to be thicker as it needs to support quite alot of weight and for the wheel to sit close to the wall to…
Measured up an original CSL DD t slot nut and modelled one with a home for a m6 nut and an extra 1mm in the "T" for strength Works well. For strength which this needs I print with 4 walls. Managed to give it some stress lines so v2 moves…
I designed it to work with the podium hub from Fanatec. it uses an arduino pro micro BUTTON BOXES – AMSTUDIO (amstudioprojects.com) switches 4 way x4 Amazon.com: uxcell 5 Pcs 10x10x9mm 6 Pin 5 Way Momentary Square SMD SMT Tactile Tact…
This is a dashboard mount for Fanatec's CSL DD wheel base along with a Google Pixel 6a. Feel free to tinker with the provided .ipt file (Autodesk Inventor or Fusion 360) or even send me your smartphone model and I'll gladly modify the…
My mod is greatly inspired by some commercially available one but I've modeled it myself from the ground up and took the liberty of adjusting it to my liking. This mod will make the braking more linear and less stiff overall which is what…
UPDATED TO VERSION 15 (see new files below). Both in single and double-holed versions. These were modified to get the QR2 to “lock in" more securely. Single-hole mount version requires an M6 bolt. -- Modified from MrPink110's QR2…
I needed something to mount Fanatec V3s pedals on Playseat Challenge, so I came up with this design. I've printed this in PLA, but you could go with PETG for strength There are 2 variants, one for M8 bolt since v3's has 8,5mm holes for…
Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…
A display stand for your Fanatec Formula V2 or V2.5 wheel. No supports. Printed in Galaxy Black. Can also be printed on a Prusa Mini.
I designed a cap for the Fanatec QR1 wheel base, since I added lube to the QR1 to get older wheels easier off the quick release, all the dust sticks to it. This dust cap will prevent that. This is an MMU version with the Fanatec logo…
Upgraded to the QR2 for my two wheels and wanted a wall mount. Due to the tapered fit and poka-yoke design of the QR2 I didn't find any available models would allow the wheel side to lock on. This design should be quite forgiving printer…
Adapter for mounting the original Fanatec Magnetic Paddles on a Fanatec McLaren GT3 V2 Steering Wheel. Cable adapters are still required for the connection on the board. The adapters can be found under the following links.…
Mounting solution for the Fanatec ClubSport DD/DD+ power brick, Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts The Series 15 that I modeled the mounting to is from tnutz.com and has a 38.10mm spacing from the…
QR1 Lite is known to have quite big clearance of the sides of the cutout causing noise clicking and adds “dead” movements when turning under load. Common “fix” is piece of electrical tape wide enough to cover sides of the cutout, I tried…
Fanatec CSL Brake and Gas pedal
Mount your QR1 equipped wheels from Fanatec vertically, also on IKEA SKADIS pegboards. I designed this mount in 4 different versions. Each can be mounted differently Base Mount Version Info “Clean” Can be mounted using double sided tape…
Made a simple mount to add the Dayton Audio TT25 Pucks to the CSL Accelerator and Load Cell Brake pedals(probably works on other pedals as well). The mount uses the original bolts and has just enough thread to hold the mounts and pedals.…
Phone holder 100% customized to MY PHONE and its protective shell. I can't guarantee compatibility with your phones, but this can serve as a basis for adapting this system to your phones.
Hello this is my remix of the Wheelstand from DCS21. https://www.printables.com/@DCS21 I build an Qr2 style holder so you can put your new Qr2 Wheels on this stand. parts needed: 3x M5 threaded inserts (tested with Ruthex) 3x M5x12 parts…
Phone holder for Sim Racing Dashboard. Fits Fanatec accessory mount. Height adjustable for different wheels (Tested with WRC and Mclaren GT3). Spring mechanism means quick adjustments and easy removal when you need the phone - simply…
Fanatec DD Pro / CSL DD mounting adapter for 8° tilt. With this mounting adapter the wheelbase can be mounted at a 8° tilt for a more comfortable use of the wheel. Designed for Marada and similar racing frames, but can also be used to…
Ich habe hier mal ein Drehknopf für das Fanatec McLaren GT3 Lenkrad konstruiert um die Knöpfe farblich verändern zu können ————————————————————----------------------------------------------------------- I designed a rotary knob for the…
Fanatec CSL Elite and Clubsport Cover for the Quick Release with the Fanatec Logo on top. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 15% Filament brand: Prusament Filament color: Black Filament material: PETG
fanatec csl dd base shaft cover used with metallic QR serves to cover the shaft and eliminate bending motion
A sturdy spacer to move your Fanatec ClubSport Handbrake V 1.5 farther out from your shifter or other mounting point. There is zero wobble due to the large contact surface. Change Z height to the dimensions you want. By default, the part…
Print two(2) of these, one(1) on each end......the slot peg is placed so the end will be flush with 40Series profile...
Universal Playseat Challenge Fanatec Pedals Mounts After breaking the existing pedal mounts I found on Thingiverse I decided to design my own that would both be more durable and more versatile. This universal mount allows you to affix…
Description Sim racing is cool, but gear is expensive. That's why I try to get the most out of the most affordable stuff and build up my rig this way. Simagic has a relatively open ecosystem and provides the P-HPR force-feedback…
This simple cover slips over the base side of a Fanatec QR2 connector. As shown, it was printed with fuzzy skin and a 2nd color for the Fanatec logo to match the back of my base and my F1 wheel color, but both of those are, obviously,…
This cupholder attaches to the 2-inch OD frame tubes and features options for both a 90mm and 100mm inner diameter holder with cutouts for mug handles. Stay hydrated with the beverage of your choice while enjoying the convenience of this…
Fanatec CSL Pedals Pedal Plate Plug and Play with Fanatec Logo and F1 Logo. Multicolor printed on Bambu X1C
This phone holder can hold from 11cm to 18cm phones with max thichkness of 11mm. I used a rubber band with about 80mm. For the CSW you need M6 screws. The stls from the slides are rotated correctly. The 3mf you have to rotate to the outer…
Remix of arbornoctis' excellent model. I redesigned the mount in Fusion 360 to fit my iPhone XS. Added slots on both ends for charging in any orientation while in the mount. Printed upright with: Extrudr NX2 PLA Black 0.3 mm layer height…
Based on Fanatec's pedal faces that comes with the Clubsport V3 pedals. Just 25 mm wider on one side. Fits all pedals and can be mounted upside down. I use this on my throttle and brake pedals. Both with the extension on the left side of…
This is a more rigid knob for the Fanatec steering wheels as the original ones tend to brake quite easily (see Pictures :-)). ++++Print details++++ designed for 0.15mm Layerheight supports needed #####GERMAN##### Dies ist ein stabilerer…
This general use platform is perfect for holding a mouse and includes an added cubby for storing small items. Can be printed without supports.
Project : https://simracing-pc.de/en/2024/08/16/diy-project-vocore-4-inch-screen-dashboard/ Web : https://simracing-pc.de Discord : https://discord.gg/V5ZKUj3weJ A small DIY project centred around the 4 inch VoCore display, consisting of…
Remix della Dash di Wotever per VoCore 5" (Micro USB) e 4" (Micro USB) Diviso in tre sezioni: Front per chiusura Middle ospita il display Back ospita il collegamento Usb e tutti i dadi a fusione (M3 e M5) per viti di chiusura (M3x20) e…
This is remix/heavily inspired (and redrawed from scratch) of @JoseJacobUK_230742 model for two reasons - original model didn't perfectly fit on P1 V2 wheel and its STL has errors (unable to import). Although original caps and stickers…
Basically the same as the original model, just added grooves for gluing hose flat sealings ¾" DN20 30x20x2 to add grip. As the original one, this one also requires two Bessey TK6 60/22 table clamps and 3x 16mm M6 socket head cap screws.…
Fanatec shifter knob holder - on 8020 profil rig. Perfect for Sim-lab, Simxpro, TrakRacer rigs
I recently upgraded to Fanatec QR2 and wanted a way to display my spare wheel. But I didn't want the mounting system to go near the electrical pins or rub on the connection mechanism. This design just allows the wheel to slot into the…
Orient print with logo on the side, supports not required. I used 30% Infill, but with 3 walls 20% should be fine. The holes are made to work with M6 socket cap screws which also hold the brick in place. If you've seen this print for sale…
Made for Bambu Lab P1P P1S X1 X1C build volume.
These mounts allow the Dayton Audio TT25 transducer (bass shakers) to be mounted to the Fanatec CSL pedals. There is a separate model for the accelerator and brake pedal. The mount is secured to the TT25 via M3x15 bolts and then the…
Elevate your racing experience with this Magnetic Shifter MOD designed to enhance the shifting feel on the Fanatec CSL P1 V2 steering wheel. Say goodbye to spongy shifts and embrace a more precise, binary sensation with this custom…
I wanted a place where I could store my spare/currently unused Fanatec wheel but did not want to just lean it against or mount it onto a wall. So I've tried to create a stand similar to some of those headphone stands you can find here as…
Due to Rewbin asking over at my Fanatec QR Wheel Stand in the comments ... He also provided time and effort to test-print the model iterations and gave great feedback, thanks! I edited my QR1 stand to work with the new 2023 QR2 quick…
I wasn't happy with the stock foam in the CSL Brake, as it was extremely soft and made the pedals feel too linear. Printed with 5 Walls, 5 Top and Bottom Layer, 25% Gyroid Infill with a 6mm nozzle. I only use the biggest insert and it is…
Fanatec McLaren GT3 v2 is maybe one of the best wheel you can buy for this price. But it come not full refined, at least for me. So I spend time to design a magnetic shifter which fit with the part I have in hand. This 3d printed version…
A mount to glue a stream deck (MK1) to a Fanatec Podium (DD1 or DD2). Made to be flush with Fanatec provided screws
Case for a 4" or 5" screen designed to be used in conjunction with the Fanatec McLaren GT3 steering wheel. It requires a sponge tape on the back of the screen to prevent movements, and perhaps a small drop of hot glue on the USB mount to…
QR2 base side Shaft dust Cover. Base on this model . Category: Gadgets
A mount to fastening Dayton bass shakers to Fanatec csl elite v2 pedals. May or may not print with support. Mount with zip tie. I use the mounting bracket shipped with the shakers, but might work without. *Updated version from the one…
The stopper nut broke on my Fanatec CSW V1 and i decided to design one due Fanatec doesn't supply any part for V1 wheelbase.
A magnetic shifter mod for the Fanatec Formula Wheels. Based on the clever model of SethBon with the following changes: Added features Improved stiffness Switched the pockets for the magnets to the opposite sides. This keeps the magnets…
This simple hook latches on to the tube profiles of the Fanatec Clubspot GT sim racing cockpit cockpit and can hold keyboards, controllers and other accessories.
I customised a washer to make a spacer when attaching the Fanatec Handbrake to the Fanatec Shifter. When the shifter is set up on your right, I found the handbrake to be very close to gear shift when shifting into 5th and 7th (Not I have…
You can use this tool to tighten or loosen the wheel nut of the Fanatec DD1 or DD2 wheel base. Print with enough perimeters (I used 5) to make it strong enough and 30% infill
Support for Fanatec CSL DD used for 40x80 aluminum profiles sim rig. No supports are required. M6 bolts for securing the CSL DD and M8 bolts for the 40x80 profiles.
Remix of the Fanatec QR1 wheel mount in order to attach it directly to an 8040 profile of your simrig
A small print to avoid breaking usb c connector on Fanatec GT DD pro. Useful when you change USB cable often, from PC, to PS5, to XBox … USB connector fit without resistance, but avoid sides movements. Use a long M5 screw, at least 40mm,…
here is a very simple mount for the simagic P-HPR haptic feedback motors to mount them on the Fanatec ClubSport V3 pedals with the D-pads installed. I used two M6 screws and screw nuts to tighten them onto the pedals, and the motors are…
This is a table mount holder specifically designed to securely hold the Fanatec DD Wheelbase. The holder is made to fit tabletops with a thickness of 25mm and features a sturdy design that ensures the wheelbase is held securely in place…
Holder for the Fanatec CSW Power Supply for a alu rig. Holes are for M8 Screws
Will work with Elgato flex arms and other such 3rd party mounting solutions. Pick the corresponding file for either Steam Deck + , Stream Deck MK.2 https://www.elgato.com/us/en/p/heavy-clamp https://www.elgato.com/us/en/p/flex-arm-l…
I wanted bigger buttons for my CSL elite P1 wheel like those on my Clubsport F1 when the caps are on so I designed and made new ones. These should also fit the WRC and BMW wheel which replaced the P1 in 2021 These replace the stock…
This is my Simracring Dashboard for my Fanatec CSL DD. The Screen is an Touch Display with an Raspberry PI 3. https://www.amazon.de/gp/product/B071CKFTJH/ref=ox_sc_act_title_1?smid=A394PHJZ68XW4G&psc=1 The Leds are cut into 3 section an…
Only needs support for the upper mounting rail. Changes: added "Controller Holder HeadphoneCutout.stl" that includes a cutout at the bottom for the headphone jack.
Slides over the handbrake plastic cylinder in place of the foam grip. Designed for TPU 0.4mm Nozzle 2x Walls 10% Gyroid Infill (More if you want less ‘squish’) Use your slicer to add custom text
Fanatec SQ1.5 4040 Aluminium Mount Bracket Existing solutions available on the market either put the shifter too far away, too close, or encroached into the seated area of the rig. These brackets put the shifter directly over the 4040…
A Vertical Mount - Great for SimHub button boxes and reading chat. A Horizontal Mount - Great for OBS, Secondary Display, and info readouts. A Hanger that attaches to the CS GT COCKPIT ACCESSORY RAIL Each vertical or horizontal mount will…
There were some mods for Fanatec CSL WRC Wheel, such as this from Thingiverse https://www.thingiverse.com/thing:4807028 or one from Sim Racing Addict https://www.youtube.com/watch?v=T6PnI21wbo4, but they are all very troublesome to use,…
I’ve designed this custom stand for Fanatec wheels with the QR2 quick release system, perfect for organizing and displaying wheels in a stylish way. While I don’t own Fanatec wheels myself, this stand was created to match QR2…
I dont have a video of how to install but srm did a video that gives the idea. hope it helps (2) Srm Magnetic Shifter Upgrade - YouTube i printed on prusa mk3s in petg with no supports. for parts youll need i used some x6x¾ wood screws to…
Shaft support can be FDM 3d printed. I'd not FDM print the shaft, too brittle. The shaft in the picture is made out of Formslab Tough 2000 resin (tested, pretty strong). From my tests, it would do the job fine but I will be replacing it…
This model is heavily inspired by the version from Sim Racing Addict, i designed it myself so it's probably not that refined. So if you have the money rather buy the Sim Racing Addict version if you can. You are free to improve the model…
I like the design, but found it needed a few improvements as listed in the remix section. My haptics caused the shelf and mouse to rattle. Solved with a mousepad, rim, and cabinet bumpers. It also needed a cupholder option. The cupholder…
Edit : ADD mount for ASETEK invicta face plate and mount Edit : ADD for Simucube sport/pro mount, that was a request I don't have a Simucube, print the first two layers, stop printing and test on your base if the holes match (normally it…
This phone holder is designed to accommodate a wide variety of current-generation smartphones, including those with thin cases. It mounts securely to the upper accessory rails of the CS GT cockpit.
Updates 23.01.2022 - update: -This has used me excellent while owning playseat but I have now moved to a P1X rig and don't plan to edit files for this. 14.04.202 - update v1.1: -Shifter_ball_ram failed, probably hit with it while storing…