2,488 models
Buy a printed fidget cube from me directly: AustinMakes.etsy.com An addictive fidget toy that you won't be able to set down! Prints in one piece and works right off the print bed. Note: vertical hinges will be stiffest after printing, but…
Print approx. €2.80–€3.43 excl. taxPreliminary estimate for one variant
This is my own design for a filament spool holder to be put on a roof or wall. UPDATE 07-26-2019: Added version 2, beefier build UPDATE 04-15-2021: Added version 3, more beefier build and extended the base to reach the mount screws more…
Print approx. €4.62–€5.65 excl. taxPreliminary estimate for one variant
I got annoyed by not being able to either print of fit the 90º heat bed covers for MK3. So I took inspiration from the last model that I've tried and built my own version from scratch based on the original Prusa source files.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
UPD v23: Fixed wall thinkness issue on top cover UPD v25: Fixed fillet fails to calculate for small “holes"; Fixed top/bot X axis pattern for large boxes (>50mm width) UPD v26: Fixed side wall holes number and offset calculation, now…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
There are a lot of other Vice models here, but this one is mine. I like it because it looks cool (to me), is 100% 3D printable (without any supports) and works well for my purposes which is to hold Pi Zeros and their pHats for soldering,…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
It would be nice if you post your make. Thank you
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Buy a printed cube from me directly: AustinMakes.etsy.com This variant of my Yet Another Fidget Infinity Cube v2 model is the easiest yet to print. Assembles using M3 flat head screws. (If there's demand for it, I can upload a version for…
Print approx. €4.50–€5.51 excl. taxPreliminary estimate for one variant
I first ran across “Yet Another Dice Tower v2” years ago and printed many copies for myself and friends. Since then I have lost the files and it appears that the original model is no longer available. There are many derivatives of the…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
The ones I found did not fit my needs, so I made this one. It has a small hexagon to fit in the empty inset. Inset is included in 3mf file. Step file included!
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
More FDM optimized version of iLabs CLIPPY. CLIPPY seems to be a rather exact copy of the JAYO/SUNLU/(others?) filament clip supplied with 250g spool sets. This design is my absolute favorite after testing many. Big thanks to iLabs for…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Yet another PTFE Tube Cap with Filament Catch and Retainer A simple cap that seals the end of 4-mm PTFE tubes from humidity, and at the same time prevents the filament from sliding back into the tube. Ideal for use with a filament drybox!…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Only 20mm high gives you the opportunity to install the damper feets also inside of the Bear frame. Simple and fast to print without support. Similar print setting for the Bear Upgrade parts recommended: 5 Top / Bottom Layers 4 Parameters…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
A minimalist portable folding phone stand for larger phones with cases installed. No hardware needed. The hinge pin is slightly undersized and has a slight radius on one end. Carefully insert it to join the 2 halves. It may take some…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
.15mm/layer, 15% Infill, custom supports. I used black, white, red, light gold and blue PLA.
Print approx. €11.55–€14.12 excl. taxPreliminary estimate for one variant
Decided to try my own generatively designed shelf bracket that is easy to print and mount. I designed it to support a minimum of 50 lbs./bracket and I have been able to exceed this in testing using PLA with 2 perimeters and 20% grid…
Print approx. €6.24–€7.62 excl. taxPreliminary estimate for one variant
Yet another approach to save space for spices. The structure is strong enough to hold about 10 “regular” spice cans. STL 0.2mm Speed mode had good printing results and. NO SUPPORT is required - see the attached Section Analysis image.…
Print approx. €16.46–€20.12 excl. taxPreliminary estimate for one variant
I created this try to help me stay organized and balance finding, putting away and space efficiency. Large, readable size labels allow wrenches to be stored on edge, you can tell at a glance when a wrench is missing. Generous finger slot…
Print approx. €5.09–€6.22 excl. taxPreliminary estimate for PETGSource material: PET
Not to reinvent the wheel but my mother was having a hard time with the other ear protectors I downloaded and printed so I designed this to be very easy to hook the elastic but difficult for the elastic to fall off. She says she likes it…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
Ein weiterer Y-Adapter für das 4mm PTFE Rohr, mit Innengewinden. Einfach zu drucken. 0,2 mm Schichtdicke. Achte auf die richtige Ausrichtung und die erste Schicht im Kanal, sodas die erste Schicht im Kanal in Zugrichtung verläuft dann…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
I needed a way to organize miscellaneous tea bags, and no current model quite met my needs. So I designed one! This caddy: Fits all standard individually packaged tea bags (Twinings, Stash, Bigelow, etc.) Yes, including the Tazo ones that…
Print approx. €4.49–€5.49 excl. taxPreliminary estimate for one variant
This luggage tag holder is not a remix of the original design found here: https://www.printables.com/model/607597-luggage-tag/files While the idea is inspired by that model, this is a completely new design created from scratch. I designed…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
There's a lot of scrapers on printables.com - but this is my version. As always, there's a balance between higher heat (promoting better layer adhesion) and lower heat (reduced stringing, especially with PETG). For me, scrapers should…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
I wanted an organizer that is somewhat specific to the junk on my desk, and this is the tray I came up with. Fits perfectly chap stick, and the SPACE PEN!! (Needs base that comes with the pen). The slot on the left side is for cards, I…
Print approx. €4.92–€6.01 excl. taxPreliminary estimate for one variant
I did not like the knob design for the flat xLCD cover . Most other knobs are to big and to short or does not nicly fits to the flat design.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
no supports needed
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Die Ausladung beträgt ca. 80 mm. Die Befestigung erfolgt mit Powerstrips Large, die Fläche ist dafür 45 x 25 mm groß. Die nicht klebende…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Another spare foot for a ladder with round profile. - My neighbor saw me make this one: https://www.printables.com/model/1000873-spare-foot-for-ladder and brought along his old ladder…:-)
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
Introduction A slightly over-engineered shelf. What you need Time. The shelf prints for > 17h. Enough filament. The printer will eat > 350g. 2 screws to mount the shelf at the wall: 6 x 100 What you might need (optional) round bar for the…
Print approx. €19.08–€23.32 excl. taxPreliminary estimate for PETGSource material: PET
I saw a few of these around, was bored one day and decided to mess around with designing one. I printed it in Turkey Egg from Filamentium….fun filament! Enjoy Designed with those who don't have the most elaborate printer in mind. **…
While this is nothing new, I designed this to have the glove sizes indicated on the holder. For my purposes I am printing each one from a different color PLA. I was looking for one that was a direct wall mounted option, one-piece…
Saw the 16 part fidget cube (https://www.thingiverse.com/thing:3753469) and had printed the Yet Another Infinity Cube V2 multiple times and wanted to print the 16 part. Then I notice it was based off the V1 infinity cube so I used fusion…
This is (hopefully, don't actually know) a strong version of Yet Another Fidget Infinity Cube V2. I noticed that whenever it broke it was almost always on the part of a hinge that goes in side one of the cubes. To fix this, I just made it…
Since you all loved my last dice set, I decided to create another set for you. Since I'm currently working on the dice generator, you can expect every set to have some other features or improvements over the last one. The dice generator…
Why Yet Another Drybox Design? I was looking for a storage solution for my filament, but the popular designs I found weren't right for me in terms of size or didn't meet all of my needs. I finally found some storage containers on Amazon…
About YATT - Yet Another Temp Tower is not too different from other temp towers available. However, it features a bridging test as well as a 55 degree overhangs test. It is also stackable so you can keep your printed temp towers for…
This is YACS. (yet another calibration square) Update 24-04-2019 Added new vertical test piece Update 30-10-2017 Added vertical test piece Update 26-10-2017 Flat corners now stand on the exact square corner. Corners are now named. The…
Fairly simple build but it should do the trick !
This is a variation of the Infinity Cube. No assembly required. To be printed with 0.2mm layer height and 20% infill. If the model appear to be too restrained in the joints after printing, and using it does not fixing this, heat your bed…
Wye? Y? Thinking they really should be wye since that's what they are called in plumbing. ...ANYWAY... Why another wye? Obviously because none quite worked for me. I had issues with friction and really bad luck with crappy imported…
Update April 24, 2019 Parts sized to fit 250mm x 210mm x 210mm https://youtu.be/aASsWYpQr8c Does the world need another Keyblade? This Keyblade is designed to be an easy-to-build kit with parts that screw fit together. No support material…
This is a 1/20th scale T34 tank, a rolling model. Tried to make it look like the late model t34-85 versions. I was not trying to create a historically correct model, just a model that would be reasonably fun to put together, look decent,…
Now presenting: The BASTION 13! The Vanguards were successfully deployed to the front lines, but they lacked a certain element of defense. The enemy made quick work of them after switching to ranged armaments. The Bastion 13 has been…
It's an easy print spiral cone thing. Everyone else made one so here's my version. Please like or upload a make!
My old keyboard left me with a large amount of clicky Cherry MX Blue switches, so inspired by FlexiPals Toy Shop model I designed my own version with a slightly less "artificial" (rather unevenly cut) piece of cheese as a keycap.
This is intended to be a somewhat realistic looking flex octopus. Each tentacle is made up of twelve segments. Bed plate adhesion can be a challenge. A textured plate can really help. I consistently print it in PLA on a textured plate…
This clip has been designed to handle spools with a wider frame. In addition, version B has a double-sided fiber groove, so it can be locked on both sides of the clip. Print instructions I usually print it in 0.15 but 0.2 is also accurate…
Over the last year I have been fascinated by 3D printable whistles and have designed a few of my own and recently I found the "perfect'' whistle design! After managing to design this whistle I then started transforming it into all sorts…
I designed these cable clips specifically for OpenBuilds V-Slot rail. Other clips I found on Thingiverse didn't quite fit right. Includes 8mm, 10mm, 20mm and 30mm length clips. They can be used to route cables on any machine that uses…
Yet another knight on foot with a sword. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…
Another Garmin bracket, this time with mountain bikes in mind. The clamp can be printed in place, with no supports necessary. The interface itself is in several parts, to improve durability and make it easier to print, again without…
Hallo liebe 3D-Druckfreunde und Centauri Carbon Fans! Bei meinem Elegoo Centauri Carbon wollte ich mehr Platz zwischen Druckkopf und Glasabdeckung bekommen. Die im Internet kursierenden Erhöhungen waren mir ein wenig zu niedrig, kosteten…
I downloaded and printed many 608 bearings. None of them satisfied me. Half printed balls were flying around in my printer or the bearing had too much play or other problems. So, after a lot of experimenting, drawing, test printing and…
Overview Yet another fingerboard/fingerboard mould collection. I'm not a finger-boarder. I can't even skateboard. This is just an interesting project for me to tackle. That means that, in my ignorance, I've probably not nailed the perfect…
V2: Redesigned in FreeCAD Updated geometry is now cleaner thanks to a complete remodel in FreeCAD. A STEP file now available to allow for a smoother and faster print V1: Designed in Blender. Bambu Labs matte grey PLA was used in this…
A toothpaste holder that holds the tube vertically and allows you to squeeze its content. Between the bottom cap and the central cage, you need to fit two springs to maintain tension. Then, you can glue the bottom cap to hold it in place.…
Print in light gray or silver PLA (e.g. Apple Aluminum Silver; I used FIL-ALFA GRIGIO METALLIC).
These are some Modern-esk hexagonal plant pots. They have the same footprint and the same built-in water tray. There are smallish holes at the bottom of the inside to allow the tray to serve as a reservoir. The mid-sized one was designed…
Check out Rev 2 of this if interested in this model. Summary This is a 1/20th scale Sherman tank, a rolling model. Tried to make it look like the late model upgunned versions. I was not trying to create a historically correct model, just…
Hueforged T-rex 2 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade…
Yet another hexagonal dice tray. Just wanted something not too big and portable. Template for cutting out self adhesive felt is included. Post-Printing Get yourself some self adhesive felt. Print out the included template and use it to…
Remix of Yet Another Apple Watch Stand with holes on the bottom for rubber bumpers (I used 10mm diameter, 3mm thick adhesive rubber bumpers)
Yet another Filament Clip 1,75mm
This is an open RC car chassis project. Step files are attached. Remix, update, redesign as you like. You need to print the gears with 0,2 mm nozzle and %100 infill. Rest can be printed with 0,4mm nozzle and %80 infill. I printed all…
Battery boxes for small lithium batteries. Features print in place hinges and lock. Print instructions Print with PLA, 0.2mm layer recommended. Print both parts at once, hinges are printed in place. Like this model? Check out my other…
Elegant and satisfying fidget toy. The .f3d file includes many User Parameters for customization. You can adjust cones size, number of "arms", their thickness, length, roundness, twist, clearance between the two parts and some other…
Snapmaker U1 YATC – Yet Another Top Cover The official Snapmaker U1 top cover won’t be available for a while, and most community designs I found rely on custom-cut acrylic windows (accurate, but expensive and annoying to source). So I…
Yes, this is Another Army of Cute Bunnies 🐰, the cutest that you ever seen. Hide them in your home or your office ! 😆 What could be a more delightful approach to infuse your home with Easter cheer than by scattering miniature bunnies all…
probably adjust XY-hole expansion to 0.2 to fit with usual ptfe tube. Printed with PETG
This is a 1/20th scale Sherman tank, it is designed to add motors and RC control. Tried to make it look like the late model upgunned versions. I was not trying to create a historically correct model, just a model that would be reasonably…
Remixed "MINI-knob" (Prusa Mini) and "LCD-knob" (Prusa MK2 / MK3) by PRUSA RESEARCH https://github.com/prusa3d/Original-Prusa-MINI and https://github.com/prusa3d/Original-Prusa-i3 This knob features a smaller form factor, knurled sides…
My first vase experiment ..... Print instructions print in vasemode
This model includes the models linked below. I think it is more suitable for my use. Thanks to the original creation, I only modified their creation. Size mm : box 209mm X 161mm X 71mm lid 209mm X 161mm X 21mm Les fichiers 3MF sont…
This is exclusively for version 1.0 and is not compatible with Dummy 13 beta.
A multi part fridge magnet in the shape of Thor's Hammer. Many Mjolnir only come in one piece or are uploaded as just an stl. I wanted to enable people to print it in multiple materials and use their own magnet so I used the model of…
A barrel. Yes, it's another barrel on Thingiverse. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…
WHAT IS IT? This is “Yet Another Modular Storage System.” The drawers have different sizes to meet your needs, and they pivot downward to make it easier to grab things within. The “single” size is perfect for screws, bolts, nuts, SD…
This is a 1/20th scale British Cromwell tank. One of the most produced late model British cruiser tanks. I was not trying to make overly historically correct, but a model that would be reasonably fun to put together, look decent, and not…
This is an improved version of my previous paint holder, having two advantages: a) can be printed without any support b) vallejo-paint bottles can be stored head down at all positions - this is especially helpful if the bottle gets close…
The outer ridge keeps condensation contained and the hexagonal pattern keeps it from splashing around. I printed mine out of matte PLA. I recommend printing outer walls first to maintain dimensional accuracy. The fit between the coasters…
Decided to create this as a project to learn some of FreeCAD. This is a 1/20th scale Panther tank, a rolling model. It is not a particular historical variant, and I am sure It has some design features from different models mixed into one.…
I needed a particular size stackable boxes to organise drawer, so I designed this box. The size is 225 mm wide, 187 mm deep and 141 mm high.
Want a squeezer that is simple, sits flat and doesn't distort the empty end of the tube? Here's your answer. Designed for a toothpaste tube that is approximately 54 mm wide. Scale the part in the X dimension to fit your custom tube. This…
Just another ear saver for elastic masks. You can fit 18 on a build plate at once. I have included a STL that had all 18 loaded. I recommend removing the skirt.
My rendition of a Willys Jeep 1/20 scale. Finally finished printing and assembly. If you downloaded them early a few parts were updated for printability and to add a little strength to hinge points to survive cleanup and assembly. Also…
Please comment, rate, and post a make! My wife likes ordering the photo books through Google Photos. I wanted to have a dedicated spot for them under our sofa table. A quick search didn't get me what I was looking for so I designed my…
Here is the simple LCD Cover that you can use to.... cover LCD screen of your MK3 or MK2s. Very usefull when your girfriend/wife keeps complaining about screen brightness. UPDATE Version 2.0 Resized to fit on MK3S and MK3S+ screens…
Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…
Designed to print on its back without supports. 2026-09-21 : Added model with inside width 216,6, (first model have 146,6)
Another toolhead umbilical for Voron 2.4 Here's the second version of my umbilical mount. This version was designed in collaboration with @stephzic . This is the previous version ^^ Current version during developpement Courtesy of…
Yet another one of these - why?! I thought the original was well drawn but there were a few things I wanted to change. 1 - Make the walls a little beefier, 2mm thick 2 - Have the lid lock in place without a rubber band. None of the…
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀 This is an EDH/Commander tray. If you want something a bit smaller, check out the Compact Commander Tray ! This EDH tray can hold the…
YET ANOTHER IRONING TEST. I've created in orca slicer an ironing test. Found many online didn't seem to translate fully for the K1 profile and had to manually adjust & check the ironing settings for each square, so I just made my own,…
Hey here is another one of those joycon jig tools. I used cat5e wire removed from its protective coating and pushed into the slots. Print at 0.1mm layers or send it off to a high quality print service. Shapeways is great for little things…
I gave myself a challenge to create a small robot arm and control it in one month! April 2021. I used a lot other projects in the 3d printing space for inspiration and understanding. (EEZYbotARM, MeArm, and many others, Thanks!) This Arm…
A simple Minecraft-heart-style clicker. Designed for one Cherry MX switch.
Spiral Cones apparently are “the next hot sh1t” in 3D models, everyone needs one, everyone prints one, not everyone models one. Here's my 2cts - mainly because I (as others) have been intrigued by these models and wanted to find out if I…
Just a small test, how much I can achieve with this design. ;-) Infill: 5% Walls: 6 layers Magnets: 15x5 mm Noise reduction: about -10 dB (from ~68 dB to ~58 dB) in 50 cm distance measured by a mobile with app “Schallmessung”.
So just another Fidget, The print is in place, the tolerance needed is 0.3 mm. So your printer must be accurate enough for those 0.3mm. Print Settings Printer Brand: Wanhao Printer: Duplicator9 Rafts: No Supports: No Infill: 20 Category:…
A monitor stand that made to suit my own needs. I designed it from the ground up but used a few designs as inspiration. It uses shelves of 200x18mm and is 150mm high.
